IDoc ORDERS01 with different shipping addresses

Hi,
we are using IDOC ORDERS01 to create customer orders in the ERP. Which is working fine as long as we are using just a partner number as ship-to-partner in the IDoc. Now it should be possible to also use different ship-to-partner addresses. So the idea was to use the same partner number for the ship-to-partner as before but add the different ship-to-partner address in the corresponding IDoc fields (IDoc segment E1EDKA1 for PARVW = WE). Which is also working fine except for the house number. Street name and house number are put together in IDoc field E1EDKA1-STRAS. And they also stay together in the street field of the resulting ERP sales order. But the address structure (for example in the partner deatails of the sales order) uses an own field for the house number. This field is not set with the house number from the street field in the ORDERS01 IDoc but with the house number of the default address of the used ship-to-partner number. Which means that the street line for the ship-to-partner has a street name and two house numbers which is of course not what we want to be displayed in sales orders. So how can we make the right house number from the ORDERS01 IDoc the one and only house number in the sales order? How can we overwrite the default house number of the default ship-to-partner address with the house number of the different shipping address from the ORDERS01 IDoc?
Regards,
Robert

Hello Robert
Check out the following OSS notes:
1457805 - Fields not populating on inbound order through idocs.
618476 - EDI: Field HAUSN is not filled- This is for older release and for INVOIC01, but may be you can borrow and develop the concept for ORDERS01.
Also did you consider leaving House Number blank in the customer master, i.e.
in the street/house Number Filed, maintain like this:
6201 W IMPERIAL HWY/ blank
but not as
W IMPERIAL HWY/6201
That's how these fields are populated in my system.
Hope this helps. Let me know.

Similar Messages

1 line item in the sales order ship to different shipping address

Hi,
Our customer A have 3 different branches (meaning 3 different shipping address).
During the creation of the sales order for 1 material A, I want to ship 50pc to this customer A:
10pc to address A1
20pc to address A2
20pc to address A3
In my sales order, is there a way I just create 1 line item with the order qty 50pc for this material A, but split into 3 schedule line with 3 different ship to address?
I know there is alternate way where I create 3 different line item (with order qty 10, 20 and 20) and change the ship to address in the Item -> Partner tab. But using this method, I have to create 3 times of the same material in 1 sales order, just with the different shipping address.
I want to know is there a way I just need to create 1 line item?
Kindly please advise. Thank you.

Hi there,
When you have 3 different ship-to address, system will anyway create 3 different deliveries. This is coz if the header data in shipping (ship-to) is different, system will split the deliveries. Routes are different to 3 ship-to addresses & they cannot be combined in the same delivery.
So as mentioned in above thread, create 3 different line items or create different sales orders all together for different ship-to parties.
Regards,
Sivanand

How can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

how can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

One way would be to e-mail them from yourself to yourself. That would totally avoid the different ID issue.

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

What is wrong with my shipping address? I want to order pictures via apple store with iPhoto. Apple Id and payment seem ok. My current and correct shipping address appears with red letters. Why and what to do?

What is wrong with my shipping address? I want to order pictures via apple store with iPhoto. Apple Id and payment seem ok. My current and correct shipping address appears with red letters. Why and what to do?
Maybe this is relevant: I bought iphoto from the German apple store but I now live in Italy. I have tried German credit card with German invoicing address and Italian shipping address. And I have tried Italian credit card with Italian invoicing address and Italian shipping address. The phenomenon is the same: shipping address appears in red and I am asked to fill in the mandatory fields (which turn red whatever I enter).

KarinavD,
what is the setting for the Print Products Store in the Advanced Tab of the iPhoto Preferences?
The country you select there has to match the billing address. And your billing address should match the country of your AppleID and credit card used with the AppleID.
Regards
Léonie

CW2000 ANI Server is finding same devices with different IP addresses

The ANI Sever is finding devices by multiple ip addresses. One devices is showing up as two devices with different ip addresses. It will show up with the loopback under its hostname and also find it by a serial ip address.

http://www.cisco.com/warp/public/cc/pd/wr2k/cpmn/prodlit/wk2ke_wp.htm should clear up how ANI works in this case.

I inadvertently created 2 accounts with different email addresses - can I merge them?

I inadvertently created 2 accounts with different email addresses - can I merge them?

Hi have 2 accounts-accident,
Please contact Customer Care to have an agent assist you with this. You'll find the contact information here: Contact Customer Care
Best,
Sara

How do I send docs to multiple signators with different email addresses on Echo sign ?

How do I send docs to multiple signators with different email addresses on Echo sign ?

Thanks man...the problem could be on the signators side.
Rick Schell...Realtor, ABR
www.rick-the-realtor.com
Cell 615-804-3085
Crye-Leike Realtors
Office 615-373-3513
Fax 615-373-5228
Quoting Echosign-Rob <[email protected]>:
Echosign-Rob created
the discussion
"How do I send docs to multiple signators with different email
addresses on Echo sign ?"
To view the discussion, visit:
https://forums.adobe.com/message/6395941#6395941
>

One book/several copies/different shipping addresses

I need to ship the same iphoto book that i created to several addresses in the us. Do i have to upload it several times? Is there a way to upload it once, get several copies and ship to different addresses?

no - each order must be complete with the address, etc - any differences including shipping address requires a new order
LN

Price determ. for a Customer with different ship to parties within

Dear all,
I will try to explain our need with an example.
We received a requirement from our sales department who wants to manage a sales price of a specific item which is dependent from a fixed quantity in case the order is placed for a customer with different destinations (different ship to parties).
The example is as below:
Sales Price for Customer and Material A is 50u20AC per pieces for a scale of 10 pz.
The condition type ZPR0 used is a copy of standard PPR0 and it has the following characteristics:
calculation type Q Quantity
scales basis C quantity basis and scale formula "0".
We receive an order by our Customer for 10 pz and for two destinations:
5 pz directed to the location MMM
5 pz directed to the location BBB
The customer is asking us to apply this price because the pre-requisit is satisfied but how can we determine automatically in the same order if the material A is present in several order items?
We create an order with two sales order items and in each one we specify the destination in the partner roles. How can we set the condition type in order to redetermine the exact price considering the total quantity of material whitin the same order?
I hope you can help me
thanks in advance
Andrea

Hi
Your question is not fully clear to me. But what I guess you are looking for a discount which will be applicable to only one order and not for the other orders even if those orders contain the same material.
If I am correct, than yoy can do it by setting the condition Update. Suppose, you want to give Customer-material specific discount,i.e. condition type K005. Activate the "condition update" check box in the condition type detail screen first.
Then, in VK31 ,create a condition record for K005 & save it.Go to the change mode (vk32) of the cond. record and now enter " 1 " in the " No.of orders" coulmn & save it.
Now if you will create an order, this discount will be applicable only for the first one order only and next order onwards it will be deactivated automatically.
Similarly,You can set it also in terms of quantity,if the condition is calculated based on quantity ,by putting the quantiy (up to what quantity you want it to be effective) in the "Max. condition base value" column.
Regards
Pradyumna
Edited by: pradyumna patel on Jun 24, 2008 11:28 AM

Services with different IP address subnets over CSS 11500 series

Hi all folks!
I have two CSS 11500 series...
In just a few months i will have ready a DRS (Disaster Recovery Site), where i will have 2 more servers to add to the environment.
But this servers will be in a different subnet from that today i have for the servers who are configured in the current services of my CSS.
So then the doubt i arises is:
Is correct to add two new services with these servers, but using the IP addressing of the DRS site???, and including on the CSS a static route to this network, (of the DRS) in order to reach them?? is it correct, it will work well?
This would be so....
             ________________LAN to LAN_____________________
             |                                                                                |
             |                                                                                |
|------SITE A------|                                                        |------SITE B------|
     [Firewall] ===============IPSEC============= [Firewall]
           |                                                                                |
           |                                                                                |
[CSS-A]-[CSS-B]                                                            [SWITCH]
       |          |                                                                     |         |
     [SWITCH]                                                                    |         |
[srvA] [srvB] [srvC]                                                          [srvD] [srvE]
So, at [CSS-A] & B, i will put a static route to firewall that know the subnet of site B through the IPSEC tunnel.
So In the CSSs, i will add the new services for the Servers "D" & "E" with the IP address of Site B.
This should be seen as well:
!*************************** GLOBAL ***************************
ip route 0.0.0.0 0.0.0.0 [IP FIREWALL]
ip route SITE B [IP FIREWALL]
!************************** SERVICE **************************
service srvA
ip address A.A.A.x
port 8080
service srvB
ip address A.A.A.x+1
port 8080
service srvC
ip address A.A.A.x+2
port 8080
service srvD
ip address B.B.B.y
port 8080
service srvE
ip address B.B.B.y+1
port 8080
I know that this practice is not the most desirable, in fact should use"Basic Global Server Load Balancing Site Redundancy Using the CSS with DNS", but I don't have much time to change the entire environment today, and in this first stage i have to begin with this poor but quick solution that i thought and i wanted to be validated if there is posibliidades this to work
Within their experiences that they say? Will operate?
Thanks in advance!
Regards!
Esteban =)

Daniel!
Sorry by delay!
Thank you so much for you time for reply.
You have given me a great help to this doubt!
But..using "source group" let me know..
I can´t undertand the really difference between NAT with ACls as you can see at this link: (http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080093dfc.shtml)
and
this other link, using NAT (from the piont 5), (http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a0080093dff.shtml)
where the NAT is configured under a method different from the previous one..
So.. for this scenario described above, which would you recommend using? I would think that the second is the most indicated truth? What do you think?
Thanks in advance again!!!
Have nice day!
Regards.
Esteban.

Different PO through SOCO with different delivery address

Hi,
We are facing issue with sourcing cockpit. While creating purchase
order for multiple shopping carts through Sourcing cockpit, If multiple
line item have different shipping location it is creating different
Purchase orders.
We have requirement to create one PO with same vendor for multiple line
items. For above problem we are keeping same vendor even though it
creates two seperate POs.
Kindly advise.
Thank you
Ritesh

Hi Ritesh,
Please check the answers in this thread :
PO split in sourcing cockpit ? :-(
BADI BBP_SC_TRANSFER_BE
Method GROUP_PO
Kind regards,
Yann
Message was edited by: Yann Bouillut

Why connect two dhcp servers with different IP addresses?

so for an assignment at college we had to configure a router connected to two switches which both had a server connected to them.
the computers were connected via dhcp to either server however each side had a different IP. we have now been asked to justify as to why two servers were used with different IP which I cannot quite produce a business orientated answer.
I can understand connecting two dchp servers on same IP to increase fault tolerance but I do not understand using two separate IP addresses.

Hi,
Does “using two separate IP addresses“ mean 2 subnets which are connected by router？
If you have separately configured 2 DHCP servers on the 2 subnets, and want 1 of the 2 DHCP servers to provide fault tolerance for the other. You need to use an RFC 1542–compliant router, or DHCP relay agent, in order to forward DHCP broadcast traffic.
If there is any misunderstanding about your question, please correct.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SALES ORDER WITH DIFFERENT SHIP TO PARTY

DEAR FRIENDS
WHEN CUSTOMER SAY 1000 PLACE FOR ORDER MATERIAL ONLY "P-101" WITH 30 PCS. OUT OF 30 10PCS TO TO HIMSELF(1000), 10 PCS TO SHIP TO PARTIES 1010, REMAINING 10 PCS TO 1020.
IN THIS CASE HOW I WILL ASSIGN THE SHIP TO PARTY ALONG WITH QUANTITY. USING ONE LINE ITEM ONLY.
REGARDS
ARUN

Hi
This is a standard scenario of cross docking and supply chain distribution for retail companies. In this you define partner determination for different ship to parties at item level. Generally we have the main cross docking SH in header. There will be one more partner at item level which will be ship to party if other than header. These are generally the retail stores.
Now when the order is created each line item will have different SH. We cant consolidate demand in one line item for all SH. Once the delivery is created the stock all 1000 is sent to cross docking station which is warehouse at main SH. From here bulk breaking happens and pallets without breaking as sent to the SH at the item level.
This is the way it is working in my client place. This is very common used with retailers like WALMART, KMART, TARGET etc.
Reward if helpful. U can shoot more queries if u have
Kind Regards
Sandeep

Accept iCal invites with different email addresses?

Hi there
I receive calendar invites through a variety of different email addresses. I can only accept/save the invite to iCal (not a Google calendar for instance). Invites won't save to a stipulated calendar, only the default one.
I cannot notify acceptance of an invite unless it has come to an Apple email address, so work and personal email addresses show that I have been invited but the caledar does not recognize alternative addreses and as a result I cannot confirm acceptance.
Is there anyway to configure iCal to recognize multiple adresses or is there another application that you can suggest that works with multiple addresses?
Many thanks for looking.

At what stage does it change? What happens if you start the email with a capital? What happens if you select the address from the pop-up? What happens if you drag the address across from Address Book?
AK

IDoc ORDERS01 with different shipping addresses

Similar Messages

Maybe you are looking for