Idoc outbound errors05(error during translation) 07(error during syntax ch)

hi,
        i found all idocs in the system fails with status 07(error during syntax check)
idoc got different stats:
  flow of status:01
                      30
                      03
                      18
                      24
                      05 (error during translation)
                      07 (error during syntax check)
                    what could be the problem ?

Hi,
This could be the format which you are sending not matching with other system.
For example, if your are sending the Idocs to EDI, system, the mapping should be correct with the idoc which you have are sending. If haven't changed any posting program logic or idoc segments, then check with other system who is supposed to transmit the idocs.
Regards,
Ashok

Similar Messages

  • 26 Error during syntax check of IDoc (outbound)

    Hi Experts
    I am using TPSDLS - Idoc(outbound).
    When we view in WE02 : for few of the deliveries it is working fine , but for some it is giving the following error
    26     Error during syntax check of IDoc (outbound)
    Please any one help me out for the same
    Thanks & Regards
    Shaveta

    Please check the segments for the idocs in error status in WE02. The segments in the idoc should be in the same sequence as defined while creating idoc in WE30.
    For eg. taking the case of invoic02 idoc.
    Segment E1EDP01 cannot come prior to segment E1EDK01.
    As in WE30 it is defined to come after E1EDK01\
    Please reward the points if this information is useful.

  • File to Idoc - Outbound Error

    Hi,
       I am doing File to IDOC scenario. I got error
    in "Message has error status at outbound status" .. When
    I opend that messeage then i got this ...
    <SAP:IDOCTYP>ZIDOCIN</SAP:IDOCTYP>
      <SAP:CIMTYP />
      <SAP:MESTYP>ZMTIDOCIN</SAP:MESTYP>
      <SAP:MESCOD />
      <SAP:MESFCT />
      <SAP:SNDPOR>SAPX11</SAP:SNDPOR>
      <SAP:SNDPRN>Logi_01</SAP:SNDPRN>
      <SAP:SNDPRT>LS</SAP:SNDPRT>
      <SAP:SNDPFC />
      <SAP:RCVPOR>SAPA11</SAP:RCVPOR>
      <SAP:RCVPRN>A11CLNT200</SAP:RCVPRN>
      <SAP:RCVPRT>LS</SAP:RCVPRT>
      <SAP:RCVPFC />
      <SAP:TEST />
      Can any one tell me what to do to solve this.
    thx,
    Ansar.

    Hi,
    There is somethig worng with your Partner Function while defining the the Partner Profile, please check it. The Partner function is optionla and see if you need it
    Go thru the link,
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
    Thanks,
    Prakash
    Thanks,
    Prakash

  • An error occurred during translation of your HTML master page. For more information, please navigate to the master page by clicking the preview button in the Master Page Gallery or directly typing its URL

    I apply theme before singing all users into application ,now  visitor/member are not affected color text so we are reapplying themes 
    I am not able to reapplying SPColor /my site Host template "  An error occurred during translation of your HTML master page. For more information, please navigate to the master page by clicking the preview button in the Master Page Gallery
    or directly typing its URL" while applying theme i am getting error
     

    is it your public site/ community site or team site?
    what level of subscription you have?i would say try to delete the site and try to create a new.
    http://community.office365.com/en-us/forums/154/t/147705.aspx
    are you able to open the site in the sharepoint designer?
    or try to send them the private message to the support team.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • IDoc outbound errors - mail send step in WF to send info-mail to enduser

    Hello specialists
    I searched quite a lot in the forums now. I found lot of info but nothing regarding my issue.
    I need to send an info-mail to the end user creating purchase orders. But only if the idoc (outbound ORDERS) could not be sent (failing for some reason, i.e. if rfc connection fails). This is what I've done to achieve this:
    - in WE40 I linked my WF to process code EDIO
    - the WF-BATCH user has an email address assigned to it (in SU01)
    - the mail sending step in my WF is configured like this:
    recipient type = G (organizational object)
    Expression = &_WORKITEM.CREATEDBYUSER.ID& (this contains the enduser id)
    subject = Test for &WORKITEM.CREATEDBYUSER.ID&
    When testing the mail can not be delivered (error SO23).
    When setting recipient type to U (E-Mail address) and giving a valid e-mail address, then it works fine (SCOT, etc. is configured and mailing to external systems works). But setting the e-mail address hard coded style in the mail send step is not an option here!
    It seems that the send mail step (SELFITEM.SENDTASKDESCRIPTION) always requires a valid e-mail address. Is it not able to handle SAP user id's ?
    Thanks in advance for some guideance on this one.
    Renaud
    Edited by: Renaud Desarzens on Feb 11, 2010 3:00 PM

    Hello and thanks for your help.
    I was able to solve it like this:
    - don't use mail send step
    - instead, add new activity with a new task (SELFITEM.SENDTASKDESCRIPTION)
    - in the bindings (workflow -> step) set:
         B --> &TYPEID&
         &_WORKITEM.CREATEDBYUSER.ID& --> &ADDRESSSTRINGS&
    Seems that the mail send step doesn't allow TYPEID to be "B" because each time I tried to tweak the generated bindings that way it messed up the recipient type and expression I set before.
    Regards
    Renaud

  • IDOC to File --- Error occurred during back-routing Error in communication

    Hi All,
    I am doing a IDOC to File (File Content Conversion) Scenario in which I have mentioned the field separator and end separator.. When i trigger the IDOC, i am only getting the first field value in the output. I am getting the following error
    "- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code>
      <SAP:P1>,IHS_BS</SAP:P1>
      <SAP:P2>,com_IHS_B07_BS,,</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error occurred during back-routing Error in communication channel</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>"
    My port and receiver are mentioned in "IDXNOALE" so that I can ignore the Acknowledgments. Please help as the error still persists..
    Thanks
    Anju

    Try this thread:
    ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5

  • AES filing error - Idoc Outbound Processing: EDI number cannot be compiled

    Hi Gurus,
    We are configuring the AES filing.
    we've done the EDI  configI and initally we got the error that EDI partner is not maintained. As per the suggestions from this Forum we've added the cusoms office details in geography tab.
    Now when we are trying to process the same, we are getting the error "Idoc Outbound Processing: EDI number cannot be compiled"
    All suggestions are welcome.........
    Thanks in Advance.

    Hi Shiva,
    Here goes the solution: you need to maintain the Number of the Number Ranges starting with "10" and this applies only to GTS system as this is HARD-CODED in the Program, apart from 10 any number of the number range will result in an "EDI Number Range compilation" error.
    Cheers
    Harsha

  • Error when attempting to apply XLIFF file during translation process

    Hi
    I am getting an error during the translation of an application.
    I exported the translation text into a XLIFF file, made a few changes to <target> values to test if the translation worked.
    I then uploaded the XLIFF file and tried to apply the translation file and it came up with the following error:
    ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00210: expected quote<quote instead of quote¿quote Error at line 1
    (I have used quote in line above to indicate single quote mark as it didn't display correctly with the quote symbol)
    Do you know why I'm getting this and what I need to do to fix it? I have carried out the translation process successfully in the past (albeit on other workspaces and with smaller applications).
    Thanks & Regards
    Simon
    Edited by: SimonF on 30-Oct-2008 03:31

    Hi,
    Thanks for your help, I used UltraEdit as you suggested and it worked ok.
    However I now get a problem when I try to Publish the Application. I get the following error:
    ORA-20001: Sync error: WWV_FLOW_PAGE_PLUGS.PLUG_NAME ORA-01407: cannot update ("FLOWS_030000"."WWV_FLOW_PAGE_PLUGS"."PLUG_NAME") to NULL
    and Sync translatation error (step 2 of 2) below this
    It does say Application 102 created/updated as the translation of application 101 above this so I don't know if the Publishing worked ok or not?
    When I test it, the translation doesn't seem to be working (although this may be down to some other mistake I've made).
    Can you help?
    Thanks
    Simon

  • Jdev11.1.1.6.0-Error while translating message to native format-FileWrite

    Im reading a file from a service and transforming the data and writing them into a file through the external reference using a Mediator component.
    I have no problem while building or deploying.
    But while executing I get an error as follows:
    Non Recoverable System Fault :
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'WriteAppointmentRequestInLogFile' failed due to: Translation Error. Translation Error. Error while translating message to native format. Please make sure that the payload for the outbound interaction conforms to the schema. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    My input is a File Adpater Read operation and output is File Adapter Write operation.
    The schemas are as below:
    Input schema:
    <?xml version="1.0" encoding="UTF-8" ?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    xmlns:tns="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
    targetNamespace="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified"
    nxsd:version="NXSD"
    nxsd:stream="chars"
    nxsd:encoding="US-ASCII"
    <xsd:element name="doctorAppointmentRequestRoot"><xsd:complexType>
    <xsd:sequence>
    <xsd:element name="doctorAppointmentRequest" minOccurs="1" maxOccurs="unbounded">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="C1" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C5" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C6" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C7" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C8" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C9" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C10" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C11" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C12" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C13" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C14" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C15" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy="&quot;" />
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    Output Schema:
    <?xml version="1.0" encoding="UTF-8" ?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    xmlns:tns="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
    targetNamespace="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified"
    nxsd:version="NXSD"
    nxsd:stream="chars"
    nxsd:encoding="US-ASCII"
    <xsd:element name="AppointmentRequestsLog"><xsd:complexType>
    <xsd:sequence>
    <xsd:element name="AppointmentRequest" minOccurs="1" maxOccurs="unbounded">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C3" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C5" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C6" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C7" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C8" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="C9" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy="&quot;" />
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    <!--NXSDWIZ:C:\SOAHandbook\DoctorsAppointmentRequestProcessor\DoctorAppointmentRequestProcessor\samples\Logged_DoctorsAppointmentRequestFile.txt:-->
    <!--USE-HEADER:false:-->
    Transformation XSL used in Mediator:
    <?xml version="1.0" encoding="UTF-8" ?>
    <xsl:stylesheet version="1.0"
    xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/DoctorsAppointmentRequestProcessor/DoctorAppointmentRequestProcessor/ReadFileDoctorsAppointmentRequest"
    xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
    xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:pc="http://xmlns.oracle.com/pcbpel/"
    xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
    xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:ora="http://schemas.oracle.com/xpath/extension"
    xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
    xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
    xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
    xmlns:imp1="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
    xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
    xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
    xmlns:med="http://schemas.oracle.com/mediator/xpath"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
    xmlns:ns1="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
    xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
    xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
    xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:bpmn="http://schemas.oracle.com/bpm/xpath"
    xmlns:ns0="http://xmlns.oracle.com/pcbpel/adapter/file/DoctorsAppointmentRequestProcessor/DoctorAppointmentRequestProcessor/LogDoctorAppointmentRequests"
    xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
    exclude-result-prefixes="xsi xsl tns pc plt wsdl imp1 jca xsd ns1 ns0 xp20 bpws bpel bpm ora socket mhdr oraext dvm hwf med ids xdk xref bpmn ldap">
    <xsl:template match="/">
    <ns1:AppointmentRequestsLog>
    <ns1:AppointmentRequest>
    <ns1:C1>
    <xsl:value-of select="xp20:current-date()"/>
    </ns1:C1>
    <ns1:C2>
    <xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
    </ns1:C2>
    <ns1:C4>
    <xsl:value-of select="concat(/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C2,/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C3)"/>
    </ns1:C4>
    <ns1:C5>
    <xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C4"/>
    </ns1:C5>
    <ns1:C6>
    <xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C5"/>
    </ns1:C6>
    <ns1:C7>
    <xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C12"/>
    </ns1:C7>
    <ns1:C8>
    <xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C14"/>
    </ns1:C8>
    <ns1:C9>
    <xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C15"/>
    </ns1:C9>
    </ns1:AppointmentRequest>
    </ns1:AppointmentRequestsLog>
    </xsl:template>
    </xsl:stylesheet>
    Just in case if you are aware, Im trying the example in Lucas Jellema's book Chapter 7 and Im getting the error there in the first example project.
    I have seen few very old threads on this problem in the forum but none of them had any answers so opening up a new one.
    Thanks.

    Your transformation with for-each look is incorrect.
    This is what you have right now:
    <ns1:AppointmentRequestsLog>
    <xsl:for-each select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest">
    <ns1:AppointmentRequest>
    <ns1:C1>
    <xsl:value-of select="xp20:current-date()"/>
    </ns1:C1>
    <ns1:C2>
    <xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
    </ns1:C2>
    <ns1:C3>
    <xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C2"/>
    </ns1:C3>This is the correct way to write for-each within XSLT:
    <ns1:AppointmentRequestsLog>
    <xsl:for-each select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest">
    <ns1:AppointmentRequest>
    <ns1:C1>
    <xsl:value-of select="xp20:current-date()"/>
    </ns1:C1>
    <ns1:C2>
    <xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
    </ns1:C2>
    <ns1:C3>
    <xsl:value-of select="imp1:C2"/>
    </ns1:C3>Also, check the flow trace in the EM console for the instance which errored out and paste here the data which is being sent to the FileWrite Adapter. Also, you need to ensure that any elements which are defined as xs:int should not have empty string as values. For example in your write schema C3 has int. So you should map C3 in XSLT like following:
    <xsl:choose>
    <xsl:when test="imp1:C2 and string-length(imp1:C2) > 0">
    <ns1:C3>
    <xsl:value-of select="imp1:C2"/>
    </ns1:C3>
    </xsl:when>
    <xsl:otherwise>
    <ns1:C3>0</ns1:C3>
    </xsl:otherwise>
    </xsl:choose>

  • Error: "Conduit Manager quit unexpectedly" during Mac Hot Sync

    Hello!  After many years of successfully hot-syncing my Palm m500 to my various Macs, i'm suddenly getting an error message every single time my Hot Sync tries to sync the Datebook data:
    The application Conduit Manager quit unexpectedly.
    Mac OS X and other applications are not affected.
    Click Relaunch to launch the application again.
    i've already tried reattaching the USB cables and the Palm m500 into the cradle, and rebooting my Mac several times, and removing the "com.palm.xxxx.plist" files and the "Palm Desktop Info" file from my users/library/preferences folder.   and i've spent several hours cruising these forums but nothing has worked.  I've tried hot synching about 10 times in the last 12 hours but i keep getting this same error.
    i also tried slowing down my hot sync by pressing the Shift key on my Mac during the entire hot sync, but i still get this error:
    Conduit Manager:  Unexpected error #-111
    i tried to paste my full log report below but i ran into the 20k character limit for this form.  since it looks like it's "Thread 4" that is causing the crash, i've deleted other parts of the log report but can send those to you in another posting if that would help.
    thanks in advance for any help you can offer!  i love my Palm m500 as I much prefer it to Apple's iCal system and would like to fix this problem so I don't need to abandon my Palm!
    Report:
    Process:         Conduit Manager [217]
    Path:            /Applications/Palm/Conduit Manager/Contents/MacOSClassic/Conduit Manager
    Identifier:      com.palm.HotSync.ConduitManager
    Version:         3.2.1 (3.2.1)
    Code Type:       PPC (Translated)
    Parent Process:  launchd [144]
    Interval Since Last Report:          657 sec
    Crashes Since Last Report:           1
    Per-App Interval Since Last Report:  41 sec
    Per-App Crashes Since Last Report:   1
    Date/Time:       2010-01-03 00:20:36.147 -0800
    OS Version:      Mac OS X 10.5.8 (9L31a)
    Report Version:  6
    Anonymous UUID:  26B9A75C-009B-45C3-B160-FB5932991E00
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x00000000160fc198
    Crashed Thread:  4
    Thread 0:
    0   translate                         0xb81529ef spin_lock_wrapper + 90931
    1   translate                         0xb8183633 CallPPCFunctionAtAddressInt + 169935
    2   translate                         0xb81861e2 CallPPCFunctionAtAddressInt + 181118
    3   translate                         0xb80dfb0b 0xb8000000 + 916235
    4   ???                               0x8138b831 0 + 2167978033
    Thread 1:
    0   ???                               0x800bc286 0 + 2148254342
    1   ???                               0x800c3a7c 0 + 2148285052
    2   translate                         0xb818b6ea CallPPCFunctionAtAddressInt + 202886
    3   ???                               0x800ed155 0 + 2148454741
    4   ???                               0x800ed012 0 + 2148454418
    Thread 2:
    0   translate                         0xb81529ef spin_lock_wrapper + 90931
    1   translate                         0xb8183633 CallPPCFunctionAtAddressInt + 169935
    2   translate                         0xb81861e2 CallPPCFunctionAtAddressInt + 181118
    3   translate                         0xb80dfb0b 0xb8000000 + 916235
    4   ???                               0x8138b831 0 + 2167978033
    Thread 3:
    0   translate                         0xb81529ef spin_lock_wrapper + 90931
    1   translate                         0xb8183633 CallPPCFunctionAtAddressInt + 169935
    2   translate                         0xb81861e2 CallPPCFunctionAtAddressInt + 181118
    3   translate                         0xb80dfb0b 0xb8000000 + 916235
    4   ???                               0x8138b831 0 + 2167978033
    Thread 4 Crashed:
    0   ???                               0x7c00867b 0 + 2080409211
    Thread 5:
    0   translate                         0xb8152c24 spin_lock_wrapper + 91496
    1   translate                         0xb816c825 CallPPCFunctionAtAddressInt + 76225
    2   translate                         0xb80bdb8b 0xb8000000 + 777099
    3   translate                         0xb80b7007 0xb8000000 + 749575
    4   translate                         0xb80d49c0 0xb8000000 + 870848
    5   translate                         0xb813d75f spin_lock_wrapper + 4259
    6   translate                         0xb8011b64 0xb8000000 + 72548
    Thread 6:
    0   translate                         0xb815289e spin_lock_wrapper + 90594
    1   translate                         0xb816e8a7 CallPPCFunctionAtAddressInt + 84547
    2   translate                         0xb80dfb0b 0xb8000000 + 916235
    3   ???                               0x819d8c92 0 + 2174586002
    Thread 4 crashed with X86 Thread State (32-bit):
      eax: 0x98c10f16  ebx: 0x00000200  ecx: 0x160fc198  edx: 0xf01804e0
      edi: 0xb81d8794  esi: 0xb81d8770  ebp: 0x80817f80  esp: 0xb019eeec
       ss: 0x0000001f  efl: 0x00010213  eip: 0x7c00867b   cs: 0x00000017
       ds: 0x0000001f   es: 0x0000001f   fs: 0x0000001f   gs: 0x00000037
      cr2: 0x160fc198
    Thread 4: (0xb011c83c, 0xb81529ef)
    0x00163b90: No symbol
    0x94f46bb0: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _YieldToThread + 532
    0x94f4bfa4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadState + 172
    0x94f4becc: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadStateEndCritical + 136
    0x15dd37c8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _SemWait__7LThreadFP10LSemaphorelR4QHdrRUc + 144
    0x15ddcb90: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _BlockThread__10LSemaphoreFl + 92
    0x15ddca38: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Wait__10LSemaphoreFl + 104
    0x15dd1eb4: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Run__Q27LThread7CleanupFv + 48
    0x15dd3df8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _DoEntry__7LThreadFPv + 64
    0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
    0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
    0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp :   + 0
    PPC Thread State
    srr0: 0x00000000    srr1: 0x00000000                     vrsave: 0x00000000
    cr:  0xXXXXXXXX        xer: 0x00000000         lr: 0x91335120        ctr: 0x9132e1f0
    r00: 0xffffffe1     r01: 0xf0101ae0     r02: 0x00000013     r03: 0xf0101b8c    
    r04: 0x00000003     r05: 0x00000018     r06: 0x00000020     r07: 0x00006187    
    r08: 0x00000000     r09: 0x00000000     r10: 0x00000000     r11: 0xa020568c    
    r12: 0x9132e1f0     r13: 0x00000000     r14: 0x00000000     r15: 0x00000000    
    r16: 0x00000000     r17: 0x00000000     r18: 0x00000000     r19: 0x00000000    
    r20: 0x00000000     r21: 0x00000000     r22: 0x00000000     r23: 0x00000018    
    r24: 0xf0101b8c     r25: 0x00000020     r26: 0x00006187     r27: 0x00000000    
    r28: 0x00000000     r29: 0x00000003     r30: 0x00000003     r31: 0x94f469a4    
    Thread 5: Crashed (0xb019eeec, 0x7c00867b)
    0x7c367b28: No symbol
    0x7c364a58: No symbol
    0x7c364b44: No symbol
    0x7c35a818: No symbol
    0x7c34a3bc: No symbol
    0x7c347fe8: No symbol
    0x7c34813c: No symbol
    0x7c32da54: No symbol
    0x7c329168: No symbol
    0x7c327e70: No symbol
    0x7c32763c: No symbol
    0x7c32884c: No symbol
    0x7c346c48: No symbol
    0x7c346ec0: No symbol
    0x8536c290: No symbol
    0x8536cf30: No symbol
    0x8536cb6c: No symbol
    0x8536e004: No symbol
    0x85366484: No symbol
    0x85372680: No symbol
    0x853c949c: No symbol
    0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
    0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
    0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp :   + 0
    PPC Thread State
    srr0: 0x00000000    srr1: 0x00000000                     vrsave: 0x00000000
    cr:  0xXXXXXXXX        xer: 0x20000000         lr: 0x7c367a80        ctr: 0x9132f590
    r00: 0x00000008     r01: 0xf01804e0     r02: 0x15f2f000     r03: 0x00000003    
    r04: 0x1610beb8     r05: 0x00000002     r06: 0xf018051c     r07: 0x00000000    
    r08: 0x000eb2a4     r09: 0x00000000     r10: 0x00800000     r11: 0xa0882d04    
    r12: 0x9132f590     r13: 0x00000000     r14: 0x003f252c     r15: 0x00000001    
    r16: 0x001751f0     r17: 0x003f2558     r18: 0x003f2588     r19: 0x003f2518    
    r20: 0x003f24e8     r21: 0xf0181426     r22: 0x00144c00     r23: 0x00000003    
    r24: 0x00000008     r25: 0x15f32dcc     r26: 0x15f32d54     r27: 0x0000ffff    
    r28: 0x000095bf     r29: 0x15f3705c     r30: 0x15f37060     r31: 0x00893ca8    
    Post relates to: Palm m500
    Post relates to: Palm m500

    I had the same problem syncing my Palm TX with 10.5.8.  After being without my Palm for 3 weeks, I bought Snow leopard, and all was fine again.  I found out at an Apple store that 10.5.8 was full of propblems, and this was one of them.
    Fast forward: I've been using 10.6 ever since it was released, happily syncing away with my Palm ... until Friday night (2 days ago), when it stopped working, and then I discovered that Palm does not and will not support Mac OS 10.6.  So I'm urgently trying to migrate everything on Palm to my iPod Touch, exporting to 10.4 on an old iBook, since it will still sync with it, then moving the data to my iMac's 10.6, and then syncing with my iPod Touch.
    I'm working on the problem now, and have my Schedule migrated, but now need to get my ToDo, Address Book and Memos done.
    The 10.6 Address Book (v5.0.1) doesn't support the Palm's custom fields like Tiger's Address Book (4.0.6).  I can't yet find a way to export the Palm's ToDos in a format that iCal can consume, and Notes on the iPod (for my Memos, possibly) is not supported on 10.6 yet for my iPod Touch.
    1 step forward, 3 steps back, so far; but absolutely necessary, now that Palm has withdrawn from the Mac market.
     Any ideas on these 3 problem areas, from anyone, would be most welcome. 

  • Error in FTP sender -Error during STOR/APPE

    Hi,
    I am working on IDOC- File.
    I am getting the following error in Communication channel,
    Error occurred while connecting to the FTP server "server name": java.io.IOException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 550 STOR fails: /Filename. User not authorized.
    Please advise me.
    Regards,
    Manoj

    Manoj,
    Please refer the thread, the same issue has been solved.
    Re: FTP: File receiver cc error...Looks pretty simple...Can U solve this
    Best regards,
    raj.

  • ORABPEL-11017 Error while translating message to native format

    Hello I and trying to do a simple read and write file adapter. When I try and map the variables in the xls file it seems to work right but I run the BPEL and I get this output :(
    ORABPEL-11017
    [2010/01/20 15:52:19]
    Faulted while invoking operation "Write" on provider "WriteFileAdaper".
    - <messages>
    - <input>
    - <Invoke_1_Write_InputVariable>
    - <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="readrecord">
    - <readrecord xmlns:tns="http://TargetNamespace.com/ReadFileAdapter" xmlns="http://TargetNamespace.com/ReadFileAdapter">
    <tns:name/>
    <tns:number/>
    <tns:email/>
    </readrecord>
    </part>
    </Invoke_1_Write_InputVariable>
    </input>
    - <fault>
    - <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
    - <part name="code">
    <code>
    null
    </code>
    </part>
    - <part name="summary">
    <summary>
    file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPELProcess_1.0_f1f4eaf21f2ea0f6ab23787c642f300a.tmp/WriteFileAdaper.wsdl [ Write_ptt::Write(readrecord) ] - WSIF JCA Execute of operation 'Write' failed due to: Translation Error.
    Error while translating message to native format [Caused by: Error in definition of native data.
    No style found to read the native data for <element name="name">.
    Must specify a style at <element name="name"> to read the corresponding native data.
    ; nested exception is:
         ORABPEL-11017
    Translation Error.
    Error while translating message to native format [Caused by: Error in definition of native data.
    No style found to read the native data for <element name="name">.
    Must specify a style at <element name="name"> to read the corresponding native data.
    Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
    </summary>
    </part>
    - <part name="detail">
    <detail>
    null
    </detail>
    </part>
    </bindingFault>
    </fault>
    </messages>
    Here is the XSD:
    <?xml version="1.0" encoding="UTF-8" ?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    targetNamespace="http://TargetNamespace.com/ReadFileAdapter"
    xmlns:tns="http://TargetNamespace.com/ReadFileAdapter"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified" nxsd:encoding="ASCII" nxsd:stream="chars" nxsd:version="NXSD">
    <xsd:element name="readrecord">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="name" type="xsd:string" nxsd:terminatedBy="," nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="number" type="xsd:string" nxsd:terminatedBy="," nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="email" type="xsd:string" nxsd:terminatedBy="${eol}" nxsd:quotedBy="&quot;">
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    <!--NXSDWIZ:F:\BPEL-Training\insert.txt:-->
    <!--USE-HEADER:false:-->

    Are you using opaque schema or custom defined schema?
    Make your File Outbound Adapter from Opaque to the same Schema as you used for input. Modify the InputVariable to Outbound File Adatper Message Type to the Schema's Element . Modify the PL Property for your Directory Structure for inbound and outbound.

  • Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

    Hello experts.
    When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
    Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
    We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
    This is what we've tried so far:
    replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64)  with the new version mentioned in Note 413708.
    tested the connection in SM59 - non successful
    tested the report query with transaction MDXTEST - non successful
    tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
    We have the following config:
    MS server 2003 SP2 x64 ed.
    SAP logon 7.20
    MS SQL server 2005
    CR 2008
    new librfc32.dll version 7200.1.39.6461
    Any ideas on what to try next would be highly appreciated!
    Cheers, IngA

    Hi Ingo.
    We have only one application server.
    I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
    Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
    --IngA
    Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

  • Hard drive error: Some information was unavailable during an internal lookup

    I tried upgrading my hard drive on my 13" MacBook Pro (mid-2010)  to a solid state drive.  When I did, I encountered a problem where I could not boot from my internal drive.
    It boots fine from the external drive that I used to clone my old HHD.
    When I run repair disk in disk utility I get an error:
    Problems were encountered during repair of the partition map
    Error: Some information was unavailable during an internal lookup.
    Running repair disk on the external drive returns no errors.
    My first thought was I have a bad SATA cable.  After replacing the SATA cable, I am still having the problem.
    Anyone have any ideas on what could be the problem?  SATA Connector on the motherboard failed?
    Thanks in advance.

    I formatted it a Mac OS Extended (Journaled) using the Erase function in Disk Utility then copied the contents of my HD using Restore in Disk Utility.  It seemed to copy all of the contents correctly.  It boots from the external drive.
    The problem starts when I put it in the computer and try to boot internally.  It will not boot.  Also, my old HD will also not boot internally now either.

  • Appleworks XTND Translator List error

    When trying to insert a text file into the Appleworks 6.22 database I receive the following error: "The translator "ASCIIT~1" couldn't be found. Please delete the file "XTND Translator List" from your preferences folder and re-launch AppleWorks."
    I can't locate a preferences folder or the XTND Translator List. Where can I locate this so I can delete it? I've googled this and only find information on using Appleworks on a MAC. Also, is there another way of correcting this error?

    Welcome to Apple Discussions
    XTND translators were used in previous versions of AppleWorks & ClarisWorks but, AFIK, not in AppleWorks 6, either on a Mac or PC.
    I wish I could be of help. I have never been able to find a preferences folder in Windows XP. A search of my installation of Windows XP in Parallels & a search of my Mac for XTND doesn't find any file with this name. If I get a chance later today, I will install AppleWorks 5 in Windows & see if I can locate this file.
    FYI: Apple Macintosh computers are referred to as Mac (capital M, small a, small c), not MAC (which is an acronym for the Media Access Control address of a networking device).

Maybe you are looking for

  • My iMac no longer can display to a secondary monitor

    I had my iMac connected to a Samsung TV via the following: iMac --> displayport cable to DVI --> DVI to HDMI adaptor --> Samsung TV After doing some updates on OSX Mavericks this no longer works. The TV detects that there is something because the inp

  • File to File without a Mapping in place ?

    Hi All, Would it be possible to tranfer a file from one destinaiton to another destination without a need to have a mapping in place. Its more of replicating a file at a source to a destination where in there is no need for mapping. But while creatin

  • Connecting IPhone 5s to Samsung TV

    I have the right adappter It works on a similar TV. On this TV it tells me " Mode not Supported".

  • Get the MFG_ORGANIZATION_ID profile

    Hi, I'm wroking with a EAM custom OA Framework form. I need to send or get the MFG_ORGANIZATION_ID in this form, to apply in my LOV's. How can I get it? Thanks Marcos Alonzo Pineda

  • How to join MTL_MATERIAL_TRANSACTIONS and MTL_SERIAL_NUMBERS

    Hello, I was browsing a lot to find a solution for this, but I did not find any useful information. What I would like to do is to create a SELECT query that downloads all material transactions of a particular serialized item. However I did not find a