IDOC outbound for sales orders
Hi developers,
you can help with the name and the transaction where I can try the standard IDOC for sales orders?
Thanks
Domenico
Domenico,
WEDI is an area menu where you can find all the transactions regarding IDOCS.
HOwever, If you trying to see the structure of a standard IDOC for sales order, you can go to WE30 and type the IDOC type(ORDERS01) and it should show you the structure of the same.
Let me know if you have more questions.
regards,
Ravi
Note : Please reward points if this helps you.
Similar Messages
-
Outbound idoc process for sales order using message control
Hi All,
I am changing sales order using VA02 , while saving sales number IDOC is creating but I am unable to see the data filling into segments. I think idoc is triggaring in background.
Can you please tell how I can see the data filling in to segments
Thanks in advance,
SNkeep the break point in the program RSNAST00
at this particular code.
perform (tnapr-ronam) in program (tnapr-pgnam) using returncode
us_screen
if found.
and also Activate update Debugging , before pressing the save button in VA02. -
Add segment to outbound Idoc for Sales order
HI experts,
I need to add segment E1EDP02 under Existing segment E1EDP01 for outbound IDOC for Sales order. FM" IDOC_OUTPUT_ORDRSP".
I have used the Exit : "EXIT_SAPLVEDC_003" for the FM "IDOC_OUTPUT_ORDRSP" in the include of the Exit i wrote my code also for adding segment and activate it.
But when i am trying to debug the code it's not working
So please guide me how to debug it
I have followed below steps to Debug.
1. In VA02 i have repeat the output.
2. Put the breakpoint in the Exit include program .
3. put the Breakpoint in ALE processing Routine in RSNASTED program also
4. Trigger the program RSNAST00 by giving the Parameter value of SALES ORDER number and execute.
But not working
And i need to know whether i have used the Correct EXIT or not.In that case how to identify the correct exit's
Thanks In advanceHi,
I hope you have to add your segments through WE30 first for your IDOC type.
Cheers,
Raja.D -
How to write a requirement for sales order outbound iDOC
i need to write the requirement for sales order IDOC
Please helpHi
From the sales order screen itself you can create the delivery from the menu
Sales order -> deliver/y
or from VL01N , enter shipping point and Order number, create and save
Reward points if useful
Regards
Anji -
Outbound IDOC BW to R/3 for sales order information
Hello everybody,
is there someone, who has any experience with transferring data (sales order data) <b>from BW to R/3</b> via IDOC.
The customer has already implemented an EDI interface for R/3 via IDOC for generating sales orders. This IDOC interface should be used also for transferring BW data to R/3. So BAPI and flatfile interface BW-R/3 is not favored!
Is there any good documentation how to proceed which can be provided to me?
In particular i am interested how to create a function module to fill an IDOC structure from a standard data base table in BW (ODS table), how to create new message types etc.
Thanks in advance
GunnarIs it possible in general?
Yes, theoretically at least.
You do not have SAP standard IDOCs (ORDERS*) for Sales Orders, neither is the functions or message types etc available on BW system. This would mean you will have to create custom idocs/message-type/process-code and configuration setup. In addition, if you are going to read data from a cube (to create the orders), it is going to be a slow and painful work.
Another option, if you do have to create sales order IDOCs, would be to extract order data from BW to a , say Infospoke file, on BW. You can process this file in R/3 system to create/post a sales order idoc. This would help as the necessary components (eg sales order IDOC) are available there already. If you need help on that (creating sales order IDOC or BAPI posting, from a file), ABAP forum would be more helpful. -
Outbound message control for sales order SISCSO.
Hi...
I am trying to generate IDoc for Sales order using message control. The IDoc of type SISCSO is getting generated as per the requirement.
I want to calculate certain things before generating IDocs. I have done the following configurations:
1. A function module 'ZIDOC_OUTPUT_SALES_ORD' is created with interface same as 'IDOC_OUTPUT_ORDRSP'. (Where i am planning to write a code)
2. WE57 where Function module is assigned to SISCSO as outbound FM.
No BD51 is done as it is only for inbound process.
3. New process code ZSO is created through WE41, which is made message independent and FM created in step 1 is assigned to it.
4. In WE20 , this process code is attached to V1 type of application under message control.
Still, my FM is not getting called... I have checked it by applying Break point as well as raising exception in the FM. But still it's not working..
Where am i going wrong??
Can anybody suggest solution??
Thanks,
Audy.Hi,
You need to use FM : MASTER_IDOC_DISTRIBUTE to create outbound idoc.fill the data in the tables EDIDC,EDIDD and generate the IDOC.
check this link:
Re: Master_IDoc_Distribute
and use transaction : WEDI for IDOC configurations.
here you will have all the transactions(step by step) to set the outbound IDOC configurations.
Regards
Appana -
Want the code for sales order confirmation idoc
New SAP output type ZA23 (with condition logic)for sales order confirmation is needed to create ORDRSP IDoc when the following 3 cases are true: 1) Item Added, 2) Line Item Changed,3) Item Deleted.
Changes to existing lines (option 002) can include:
- qty
- date
- priceLook at the function exits under the enhancement SDEDI001 you have many exits, i think the outbound idoc is primariy created by the function module: IDOC_OUTPUT_ORDRSP.
Hope this helps.
Rajeev -
Urgent: Creating ALE IDOC for SALES ORDER
hi
please tell me <b>step by step procedure to create ALE IDOC for SALES ORDER?</b>
reward for sure
regards
ravishHi,
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards -
How to look for sales order number if I know outbound delivery number?
How to look for sales order number if I know outbound delivery number?
Hi ,
If you want to see the Sales order Number from Outbound delivery or invoice,go to their respective T-codes,say for example,
for delivery,Goto Tcode: VL02N / VL03N.There you will find Document Flow Icon,click on that,or press F7.
You will get a window,there you can see the Sales order Number before your outbound delivery Number
With Thanks and Regards,
Priya -
Dear Guru's,
could anybody help me in creating the IDOC for sales order.
As per My client Business Requirment we require the following Fields in One Basic Type only.
The Fields are as follows.
Order Type,Sales Area,Sales Office,Sales Group,Material Number,Order Quantity,Purchase order Number,Purchase order Date,
Sold to party,Ship to party,Bill to party,Payer,
Vendor no ( It is Third Party order)
Contract Start Date, Contract End Date (in order we will give these dates for periodic billing purpose )..
Now i want all the fields will include in one single Basic Type.
Thank you
suribabuhi,
please check this link:
this might be help ful.
http://wwwdotsaptechnicaldotcom/Tutorials/ALE/Guide/Index.htm
balajia -
What is the IDOC Basic Type for sales order creation
Hi Experts,
Can anyone tell me Idoc Basic type for sales order creation.
Thanks
PrashantHi,
The basic types for creating the order are:
1.Orders01
2.Orders02
3.Orders03
4.Orders04
5.Orders05.
The basic type for SIS order is:
SISCSO01.
Regards,
Krishna. -
New/Change Indicator for Sales Order IDoc
Hi Gurus,
Does anyone knows if there's a field in the IDoc Segment for ORDERS that shows or indicate if it's a new or changed order.
We are sending IDocs to our freight company for sales order, but we are trying to see if there's a way we can let them know if its a new or changed IDoc for sales order.
Is there any field for this or any work around on this?
Thanks for your help.Segment Field ACTION is not been changed. I've just tested it and made changes to the Sales Order, the ACTION field is still carrying "000".
Like thomas said, can this be because I'm using message type ORDRSP instead of ORDCHG?
Does this make any difference?
Edited by: Basil Balogun on May 10, 2011 4:54 PM
Edited by: Basil Balogun on May 10, 2011 9:43 PM -
Outbound Cif userexit for Sales order
Hi All,
Is there any outbound cif userexit for sales order. I need to modify few data in outbound userexit in R/3 side.
I know there is a Inbound userexit in APO but the requirement is such that I need to modify data in R/3 since data is available only in R/3.
Regards,
Prashant.Hi Prashant,
yes, there is such an EXIT - it's 'EXIT_SAPLCSLS_002' which is called from function 'CIF_SL_DOC_SEND'. This is the very last place to modify data before sales documents are sent to APO.
Hope this helps!
Best regards,
Sebastian Göbel -
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you -
FM:create a delivery for sales order in the background.
Hi experts
I want Function Module to create a delivery for sales order in the background for both inbound and outbound.
tcode : VL10A.
Thanks in advance.
kiran jHi Kiran,
Welcome to SDN Forums
Please use the correct or most appropriate forum.
The ABAP Objects Forum should be used for: ABAP Object definition and implementation including encapsulation, interfaces and inheritance in ABAP Objects.
This thread will be moved from to .
The forum is dedicated to: Data Transfer Techniques, Batch Data Communication, Legacy System Migration Workbench, Application Link Enabling, IDOCs, BAPIs.
Please see the [Forum Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] before posting.
Also read this thread Welcome and Rules of Engagement.
Greetings,
Marcelo Ramos
Maybe you are looking for
-
How do you add a card to passbook
how do you add a card to passbook
-
Finder file info again stopped showing
iMac 7,1; Mac OSX 10.6.8 My user preferences have become modified/corrupted at least twice recently, and I'm wondering what is the cause. Back on 5 March 2015 I posted that finder had stopped showing file info Finder stopped showing file info, and wh
-
How to change R/3 System ID & Client values for a Business System in ID
I am a beginner in PI or XI. I am trying to modify R/3 System ID & Client# under Adapter Specific Identifiers of a Business System in ID. But both are in output mode and I tried to modify in SLD and then resynch at ID level, but I could not find a pl
-
CP7 Interaction not working in HTML5
I'm using the Tabs interaction in CP7 to present information. It works perfectly in web preview, but not in HTML5. I created a new one, and it works OK in HTML5, but it has 4 tabs and I only need three. I can't see where to remove the 4th tab, thou
-
SELECT CASE WHEN (BI_DR_HR_SO.SOTotal/BI_DR_HR_CQ.CQTotal)>0 THEN to_char(ROUND(((BI_DR_HR_SO.SOTotal/BI_DR_HR_CQ.CQTotal)*100),2))||'%' ELSE 0 END AS HR FROM BI_DR_HR_CQ, BI_DR_HR_SO I get the error message ORA-00932: inconsistent datatypes: expecte