Idoc outbound from business connector

Hi,
I'm trying to map values to idoc from business connector(4.6). The flow is
map
transformhierarchytoflat
ale outbound process.
When I test the application, it's showing a null pointer exception . I have doubt in what all values should i give for control records ??
Shall i create a new routing rule for this ?
Any help or suggestion will be of great help .
Thanks in advance.

HI,
You are getting the Null Pointer Exception due to missing of Values in any of the context variables or the fields from mapping on target side.
Please check the data that you are passing may have any null values and whcih are not acceptable. Test the message mapping with test Tab.
The Mandatory control records, such as Sender/ receiver Ports, Partner Profiles etc, you need to pass.
Thanks
Swarup

Similar Messages

RFC Error while trying to access function module from business connector

Hi,
I am getting the following RFc exceptions in BC server when we invoke the service pub.sap.client:invoke fail as a flow step in Idoc_Status_Add(this service is calling a function module in sap namely ZYBC_IDOC_STATUS_ADD_FROM_BC which Adds status to Idoc (from Business Connector).But no trace of failures are recorded in sap side
except 1: rfc_failure in BC trace files under monitoring.I need to know the root cause of these errors as the same services have run finely later and IDOCs were also processed successfully without any problem.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: See RFC trace file or SAP system log for more details
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1217)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3684)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3129)
at com.wm.pkg.sap.rfc.SAPSession.invoke(SAPSession.java:437)
at pub.sap.client.invoke(client.java:297)
at java.lang.reflect.Method.invoke(Native Method)
at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
at java.lang.Thread.run(Unknown Source)
could anyone throw light on how this kind of error can be resolved and why it occured?
Thanks.

What does the RFC trace file and log say? Has there been any dump on the SAP server? Check the logs and transaction st22 in your SAP system to see if the RFC-module has dumped.
My guess is the problem is in the RFC-module, I think you should start looking there.
regards,
Dionisios

Re:Upgrading from Business Connector to Xi

Hi Guys,
Can anybody plz help me how to upgrade from business connector ti XI
Thanks in advance
Hari

Hi Hari,
If you are interested to get a free evaluation on the level of complexity of your BC projects and the amount of work required for the migration please contact us and we can perform this evaluation and estimation for you.
Our product BC2XI is the only BC to PI migration product which is [Netweaver content certified|http://www.sap.com/ecosystem/customers/directories/SoftwareISVSolutions.epx?context=21B87D61C0F646A22B2A6DB254A010CA8C9C141B7529F029910FE6FF9EEEC5A701BF20EED61AC07159D98BAA068EBE1B8C5C7665EA2226374E942CF1D2A49D202711A97F135182CC%7c681CA45EAFF1066138C1B9B28AACD541&response=shared] and the only product which you can actually see a demonstration of (go to [http://www.sisusoftware.com]). We hear about other products, but these don't seem to have any public availability (at least which one could see).
It is completely feasible to automate the migration of BC records, flows, flow elements, graphical maps, 100+ of the BC built-in functions, output templates, etc. it is just very, very complex
Cheers,
Kalle

Send IDOC from Business Connector to SAP faster

Hi Developer!
I need to send a very lot of IDOC converted from XML files from the Business Connector to SAP. The XML files are in different directories pro business partner, but they have a same type (ISU_MSCONS).
My problem, that the import take a lot of time. Only in every 3 seconds (IDOC creation time) gets (or works up?) the SAP one IDOC. I start diferent services pro partner at the same time to import the IDOCs, but I couldnt short the 3 second work time in the SAP. So you can count it easy, that in 1 minute I can import 20, in 1 hour 1200, in 1 day 28800 IDOCs instead of 100.000.
It is really parallel import? Have anybody any idea to make the import more faster. I know (asked the SAP Administrator) so, one BC - SAP connection (Program_ID) has more pools (= threads) in the SAP at the same time.
Thanks any help,
Charlie

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

IDOC Mapping in Business Connector

Hello,
we use SAP Business Connector 4.7 and would like to send IDOC DELVRY03 from SAP R/3 4.6 to an external.
We had to map the IDOC an an XML structure. I created a record for DELVRY03, a record reference in Pipeline Out and an empty flow service. In this i use the service "pub.sap.idoc:iDocToRecord". Than i want use the "Map" function in the Developer. I created the target record for the XML file and map the requires fields, but the mapping does not work.
What did i forget in this flow service?
Thanks, Daniel.

is there 2 systems involved in this?
kiran

Error log on http request from business connector (BC)

Hi all,
We are sending http requests from our business connector to one client but the messages keep having log errors :
server.log details :
003C24 [B2BCORE.0064.0014] Opening Socket https://www.qab2b.xxx.com:443/invoke/wm.b2b.cxml:receiveCXML proxy=10.28.38.27:80
003C25 [B2BCORE.0038.0002] --> CONNECT www.qab2b.xxx.com:443 HTTP/1.0
003C26 [B2BCORE.0038.0002] --> User-Agent: Mozilla/4.0 [en] (WinNT; I)
003C27 [B2BCORE.0038.0002] --> Accept: image/gif, /
003C28 [B2BCORE.0038.0002] --> Host: www.qab2b.xxx.com:443
003C29 [B2BCORE.0038.0002] --> Proxy-Authorization: Basic YWJ1c2luZXNzY29ubmVjdG9yOmFidXNpbjA0
003C2A [B2BCORE.0038.0002] --> Authorization: Basic U0ZSQ2VnZXRlbDoyMDA3KkVBSV9TRlI=
003C2B [B2BCORE.0038.0002] > Content-type: multipart/mixed; boundary="--=_Part_0_1941981.1219399983635"
003C2C [B2BCORE.0038.0002] --> Message-ID: <7159395.1219399983666.JavaMail.SYSTEM@sw0030>
003C2D [B2BCORE.0038.0002] --> Mime-Version: 1.0
003C2E [B2BCORE.0040.0001] HTTP/1.1 200
003C2F [B2BCORE.0064.0017] Proxy Header <--Connection established
003C30 [B2BCORE.0038.0002] --> POST /invoke/wm.b2b.cxml:receiveCXML HTTP/1.0
003C31 [B2BCORE.0038.0002] --> User-Agent: Mozilla/4.0 [en] (WinNT; I)
003C32 [B2BCORE.0038.0002] --> Accept: image/gif, /
003C33 [B2BCORE.0038.0002] --> Host: www.qab2b.xxx.com:443
003C34 [B2BCORE.0038.0002] --> Proxy-Authorization: Basic YWJ1c2luZXNzY29ubmVjdG9yOmFidXNpbjA0
003C35 [B2BCORE.0038.0002] --> Authorization: Basic U0ZSQ2VnZXRlbDoyMDA3KkVBSV9TRlI=
003C36 [B2BCORE.0038.0002] > Content-type: multipart/mixed; boundary="--=_Part_0_1941981.1219399983635"
003C37 [B2BCORE.0038.0002] --> Message-ID: <7159395.1219399983666.JavaMail.SYSTEM@sw0030>
003C38 [B2BCORE.0038.0002] --> Mime-Version: 1.0
003C39 [B2BCORE.0038.0002] --> Content-Length: 188225
003C3A [B2BCORE.0040.0001] HTTP/1.0 200
003C3B [B2BCORE.0041.0001] ssnid=86087kPxFCsECcmXU5DHUAInKY9mEIIU-9355222; path=/;
003C3C [B2BCORE.0038.0002] <-- Set-Cookie: ssnid=86087kPxFCsECcmXU5DHUAInKY9mEIIU-9355222; path=/;
003C3D [B2BCORE.0038.0002] <-- Content-Type: multipart/mixed; boundary="----=_Part_0_1941981.1219399983635"
003C3E [B2BCORE.0038.0002] <-- Connection: Close
003C3F [B2BCORE.0038.0002] <-- Content-Length: 0
003C40 [B2BCORE.0049.0008] Sequence : index=8 depth=3
003C41 [B2BCORE.0049.0008] Sequence : index=6 depth=2
003C42 [B2BCORE.0049.0008] Sequence : index=1 depth=3
003C43 [B2BCORE.0049.0005] Invoke : index=1 depth=4
003C44 [B2BCORE.0049.0008] Sequence : index=2 depth=3
003C45 [B2BCORE.0049.0005] Invoke : index=1 depth=4
003C46 [B2BCORE.0049.0008] Sequence : index=3 depth=3
003C47 [B2BCORE.0049.0005] Invoke : index=1 depth=4
003C48 [B2BSERV.0048.9999] Array index out of range: -1
003C49 [B2BCORE.0049.0008] Sequence : index=4 depth=3
003C4A [B2BCORE.0050.0004] Copy failed: (Simple) No source data available: to=/returnedStatusCode(0), from=/returnHttp(0)/cXML(0)/Response(0)/Status(0)/@code(0)
003C4B [B2BCORE.0050.0004] Copy failed: (Simple) No source data available: to=/returnedMessage(0), from=/returnHttp(0)/cXML(0)/Response(0)/Status(0)/*body(0)
003C4C [B2BCORE.0050.0004] Copy failed: (Simple) No source data available: to=/returnedText(0), from=/returnHttp(0)/cXML(0)/Response(0)/Status(0)/@text(0)
003C4D [B2BCORE.0049.0008] Sequence : index=5 depth=3
003C4E [B2BCORE.0049.0008] Sequence : index=6 depth=3
003C4F [B2BCORE.0049.0008] Sequence : index=7 depth=2
003C50 [B2BCORE.0049.0008] Sequence : index=2 depth=1
003C51 [B2BSERV.0056.0003] Unable to send mail. Illegal address
error java log on server>logs>error:
2008-08-22 12:16:33 CEST java.lang.ArrayIndexOutOfBoundsException: Array index out of range: -1
     at com.wm.util.List.elementAt(List.java:101)
     at com.wm.lang.xml.token.BlockInputBuffer.getChar(BlockInputBuffer.java:59)
     at com.wm.lang.xml.TextNode.appendSqueezedText(TextNode.java:178)
     at com.wm.lang.xml.ElementNode.appendSqueezedText(ElementNode.java:333)
     at com.wm.lang.xml.ElementNode.getTextOfChildren(ElementNode.java:309)
     at com.wm.lang.xml.Document.getTextOfChildren(Document.java:542)
     at com.wm.app.b2b.services.DocumentToRecordService.recursiveCollect(DocumentToRecordService.java:661)
     at com.wm.app.b2b.services.DocumentToRecordService.bind(DocumentToRecordService.java:356)
     at pub.web.documentToRecord(web.java:667)
     at java.lang.reflect.Method.invoke(Native Method)
     at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:693)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:693)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:455)
     at com.wm.app.b2b.server.Service.doInvoke(Service.java:495)
     at com.wm.app.b2b.server.Service.doInvoke(Service.java:392)
     at wm.PartnerMgr.gateway.transport.B2B.OutboundProcess(B2B.java:157)
     at java.lang.reflect.Method.invoke(Native Method)
     at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:693)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:693)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:455)
     at com.wm.app.b2b.server.Service.doInvoke(Service.java:495)
     at com.wm.app.b2b.server.Service.doInvoke(Service.java:464)
     at wm.PartnerMgr.gateway.runtime.InboundProcess(runtime.java:423)
     at pub.sap.transport.RFC.InboundProcess(RFC.java:190)
     at java.lang.reflect.Method.invoke(Native Method)
     at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:693)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:455)
     at com.wm.app.b2b.server.Service.doInvoke(Service.java:495)
     at com.wm.app.b2b.server.Service.doInvoke(Service.java:464)
     at com.wm.pkg.sap.rfc.Listener.handleRequest(Listener.java:286)
     at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:6022)
     at com.sap.mw.idoc.jco.JCoIDoc$Server.dispatchRequest(JCoIDoc.java:10120)
     at com.wm.pkg.sap.rfc.Listener.dispatchRequest(Listener.java:186)
     at com.sap.mw.jco.rfc.MiddlewareRFC$Server.nativeListen(Native Method)
     at com.sap.mw.jco.rfc.MiddlewareRFC$Server.listen(MiddlewareRFC.java:1070)
     at com.sap.mw.jco.JCO$Server.listen(JCO.java:5797)
     at com.sap.mw.jco.JCO$Server.run(JCO.java:5731)
     at com.wm.pkg.sap.rfc.Listener.run(Listener.java:101)
     at java.lang.Thread.run(Thread.java:479)
Thanks for your support on this eai.
Regards,
Laurent.

ok, I think we do not need the save/loadPipeline things, because you can debug the flow without that. I first thought you act as HTTP server, but you issue the client call in the flow itself.
Looking at the logs more carefully, it shows for example:
Copy failed: (Simple) No source data available: to=/returnedStatusCode(0), from=/returnHttp(0)/cXML(0)/Response(0)/Status(0)/@code(0)
But you say have that input:
<?xml version="1.0"?>
<!DOCTYPE cXML SYSTEM "http://xml.cXML.org/schemas/cXML/1.2.011/cXML.dtd">
<cXML version="1.2.011" payloadID="20080825171850716.18637uTQ9ExzheaK+H6b7O9oCAQWPzHA-9355222.8b3632def70da7220004d0b6" timestamp="2008-08-25T17:18:50-CEST">
<Response>
<Status code="500">No cXML document received from sender.</Status>
</Response>
</cXML>
So we see that your mappings assumptions do not match the result structure.
The other problem is that you get a status 500 and do not receive a cXML document, but that might be ok, depending on what parameters you pass to the other HTTP server. At least, you get a meaningful error message back from the server, meaning communication is ok.
I suggest you first correct those "copy failed" issues and then check by single-stepping where exactly the flow fails and check that input again.
By the way, when I feed the above cXML into recordToDocument, it works fine. Did you specify other input parameters besides "node" (e.g. recordName) ? And again, are you on Core Fix 8 ?
CSY

IDOC: Message type:Business connector

Hi
I'm sending purchase order idocs to Business connector but it gets rolled back. Because i'm using VN as a partner function and a vendor number as partner, the sender are the purchase org and receiver is the Vendor.
How can i ensure that the sender name is my Logical system and the receiver are the business connector?

check the partner RFC confoguration and logical system is assigned to the RFC destination .business connector means
EDI subsystem related.
please give the details about business connector

Problem processing IDOC on SAP business connector

Dear all,
Using the SAP Business Connector I try to convert and IDOC which is in plain text to a record representing this IDOC.
Note: The record is generated using a DTD and the plain text is 'inserted' to the service using a MAP statement.
Which flowservice can I use and how should it be used?
Currently I'm experimenting with the FlatToHierarchy service.
Your help is appreciated!
Best Regards, Harald

Hi,
I wonder that no one replied until now!
You are on the right way: you must use the service pub.sap.idoc:transformFlatToHierarchy. Then you must create a record in the PipelineOut-Section, referring to your IDoc-Record (that you have created form the DTD), and then connect/map it to the Service-Out-Parameter boundNode of the transformFlatToHierarchy-service. The connection between boundNode in Service Out and boundNode Pipeline Out must be deleted and the last must be dropped (red arrow down).
That's all! You don't need no other Mapping-Step.
I hope that would help you!?
Pöease excuse my bad english: I'm not pratizing it very often and my native langugae is german.
Best regards, Dagmar

Regarding idoc mapping in Business connectors

Hi Experts!
I have a scenerio where i have to upload and xml file and then mapp it to the matmas_bapi idoc and send an idoc to R/3 to change material data.
I have completed upto getting xml file converting it to the required field but im not able to send it to r/3.
if someone can help me out with that.
thanks in advance
jawad

is there 2 systems involved in this?
kiran

Migration from Business Connector to XI

Experts,
when migrating from BCo to XI, what is the approach?
What r the things that can be considered?
How can we compare XI and BC?
Any links should help me.
Thanks,
-Naveen.

Hi,
Have a look on:
this SDN thread:
How to move SAP BC config automatically to SAP XI?
this SAP doc:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
others found thanks to google:
http://www.reply.it/upload/File/pdf_boxjolly/eng/CAPR05_sapXI_ENGLISH.pdf
http://www.asug.com/client_files/Calendar/Upload/MigrateToXI%20ohio%20asug.ppt
Moreover a session will be organized to the SAP tech:
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/92e6dde6-0901-0010-f3a3-9ed771f90e71 [original link is broken]
Hope this help you
Mickael

Business connector developer-Error message 'No IDOC found in input'

Hi,
Please note that this query is related to business connector developer not to XI.
I have created a flow service based on an IDOC. When I tried to test the service from the business connector developer it gives me an error 'No idoc found in input'. I have done the setting based on the business connector configuration guide. The idoc also send to the port successfully.
Can anyone guide me how to trigger the test from business connector developer for an idoc.
Thanks
Jim.
Edited by: Jim Jose on Jul 13, 2011 5:58 PM

Hi,
Probably you would have created the routing today, with valid from todays date. But the order you are creating may be with start date in past and system is not able to find and valid routing for the day.
I would suggest you to remove both the Basic "Start" and "End" and change the scheduling type to "Current date Scheduling", now enter. If system still not finding the routing, use the function "Read PP Master data".
Regards,
Prasobh

JCo IDoc: SAP Business Connector required?

On my searching for the error IDOC_ERROR_METADATA_UNAVAILABLE i have found this thread:
BC 4.7 -IDOC_ERROR_METADATA_UNAVAILABLE
"As of SAP BC 4.7 the SAP Adapter (the piece dealing with the SAP system(s)) uses the new SAP IDoc Java API which uses other function modules to retrieve the definition data of the IDocs.
You need new permissions in the SAP system, especially
S_IDOCDEFT:EDI_TCD=WE30,ACTVT=03,EDI_CIM=,EDI_DOC=
S_CTS_ADMI:CTS_ADMFCT=TABL"
Does JCo Idoc require the Business Connector installed to execute the JCoIDoc.createDocument() method? I guess not, but i can not see other reasons for the error message. If i read it correctly, the BC needs the permissions in SAP, but the JCoIdoc library does not depend on the BC.
Mike

No, it is not required. At my company we use a third party software to handle all faxes. Really it is setup SAP as an output device, so it is just like printing to a printer. THe only differences is we need to have a header page in the sapscript which gives all of the details of the fax to the third party software. This software then strips off this first page and faxes the rest of the pages.
It is called RightFax and it runs on a separate server.
Regards,
Rich Heilman

Business connector exceptions(java)

Hi,
I am getting java exceptions from Business connector server continously.Need to know the root cause of these errors and how they can be eliminated.
The error i am getting is as below:
com.sap.mw.jco.JCO$Exception: (108) RFC_ERROR_INTERNAL: internal error
           at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeCreateTID(Native Method)
           at com.sap.mw.jco.rfc.MiddlewareRFC$Client.createTID(MiddlewareRFC.java:1246)
           at com.sap.mw.jco.JCO$Client.createTID(JCO.java:3903)
           at com.wm.pkg.sap.rfc.SAPSession.createTID(SAPSession.java:768)
           at pub.sap.client.createTID(client.java:373)
           at java.lang.reflect.Method.invoke(Native Method)
           at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
           at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
           at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
           at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
           at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
           at com.wm.lang.flow.FlowState.step(FlowState.java:430)
           at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
           at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
           at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
           at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
           at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
           at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
           at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
           at java.lang.Thread.run(Unknown Source)
Any help on this regard would be highly appreciated.
Thanks in advance.
Regards,
Priya.

Hi Astrid,
thanks for ur reply.
i will chk that out and by the way the below is the full error log am getting and also there is some data loss in inbound messages to sap due to this error and IDOC exception.can u pls help on this issue
Error being reported is:
com.sap.mw.jco.JCO$Exception: (108) RFC_ERROR_INTERNAL: internal error
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeCreateTID(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.createTID(MiddlewareRFC.java:1246)
at com.sap.mw.jco.JCO$Client.createTID(JCO.java:3903)
at com.wm.pkg.sap.rfc.SAPSession.createTID(SAPSession.java:768)
at pub.sap.client.createTID(client.java:373)
at java.lang.reflect.Method.invoke(Native Method)
at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
at java.lang.Thread.run(Unknown Source)
and
com.sap.mw.idoc.IDoc$Exception: (3) IDOC_ERROR_ILLEGAL_TYPE: The document does not correspond to the associated repository.
at com.sap.mw.idoc.jco.JCoIDoc$JCoDocumentList.add(JCoIDoc.java:3095)
at com.wm.pkg.sap.rfc.SAPSession.sendIDoc(SAPSession.java:671)
at pub.sap.client.sendIDoc(client.java:356)
at java.lang.reflect.Method.invoke(Native Method)
at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
at java.lang.Thread.run(Unknown Source)
thanks in advance
regards,
priya.

Business Connector Inbound process failed

Hi,
We have a requirement to import a QALITY IDoc into the Business Connector 4.7 to send to customer in CSV flat file. However, everything when I tried to import the IDocs (I have configured the partner profile and the routing rule), I receive an stack overflow error when the process gets to wm.PartnerMgr.flow.RCVR.SENDER.MSGTYP. I am using wm.wmPartnerMgr.~B2B.InboundProcess to receive. I would really appreciated it if anybody can tell how to overcome this problem. Thanks.
Rocky

The fields we usually fill in segment are:
TABNAME
MANDT
DOCNUM
DIRECT
IDOCTYP
MESTYP
SNDPOR
SNDPRT
SNDPRN
RCVPOR
RCVPRT
RCVPRN
Do you get the record for the IDoc from SAP?
Best regards,
Jure

Business Connector and XI

Dear Sir,
Are there any preson change from Business Connector to use XI instead ?? Please kindly advise . how did you convert from BC to XI
Thank you and best regards,
Vimol

Hi Vimol,
Check this "How to" guide, for the required information
https://websmp205.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202&_OBJECT=011000358700005272252005E
other How to guides,
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
have a look at this also...
Re: Connectors and Xi...
also,
XI FAQ/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
I hope this will help you.
Regards,
Saurabh...
Reward with points if found helpful.

Idoc outbound from business connector

Similar Messages

Maybe you are looking for