Idoc Outbound Status Error

Hello everybody,
I have an interface that sends and Idoc to an R/3 system and I have it on Status "Processed" but in Outbound Status "System Error" with red flag in SXMB_MONI in PI, but I can't see no dumps neither in PI or R/3, so message in queues I turned on the trace in ST01 and I can't the RFC call that PI should do to R/3 to send the Idoc, I think is about roles and security oft he communication user that exists in R/3, but I'm not sure what roles it should have to allow the Idoc to go thru, any suggestions?, thanks in advance.
Regards,
Oscar

You dont' have enough permission.  SAPALL try with..
check this one SAP Note Number: 460089
Edited by: Anand on Dec 4, 2008 7:03 PM

Similar Messages

  • STPPOD Idoc creation status : Error in ALE Service

    Experts,
    I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
    When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
    Status Message for Selected IDoc
    Status Text:   IDoc: 0000000000211243 Status: Error in ALE service
    T100 Text:     Entry in outbound table not found
    While i have properly configured Partner Profile for  Message Type STPPOD :
    Partner Role          Basic Type     Receiver Port           Application     Output Mode
    LS        DELVRY03       A000000018 (XI port)           GRN               Transfer Idoc Immediately
    When i try WE19 t-code for this idoc, i found  the error "Port '' does not exist in the table of port descriptions"
    while  i have already defined port (A000000018)in WE21 t-code  and this port also working fine for other messages.
    Please suggest.
    Thanks.
    Regards,
    Pawan Keshwani

    Nikhil,
    Issue is resolved it was the wiered error. As i removed LS from the field  Partner Role in STPPOD message at  partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
    Thanks.
    Regards,
    Pawan Keshwani

  • Idoc outbound errors05(error during translation) 07(error during syntax ch)

    hi,
            i found all idocs in the system fails with status 07(error during syntax check)
    idoc got different stats:
      flow of status:01
                          30
                          03
                          18
                          24
                          05 (error during translation)
                          07 (error during syntax check)
                        what could be the problem ?

    Hi,
    This could be the format which you are sending not matching with other system.
    For example, if your are sending the Idocs to EDI, system, the mapping should be correct with the idoc which you have are sending. If haven't changed any posting program logic or idoc segments, then check with other system who is supposed to transmit the idocs.
    Regards,
    Ashok

  • Idoc with status 68

    Hi,
    Can any one tell me the reason for idoc status as 68.......in which case the system will show me the idoc status as 68
    Thanks,
    Shilpa

    IDoc status Description
    Outbound values :-->
    00 Not used, only R/2
    01 IDoc generated
    02 Error passing data to port
    03 Data passed to port OK
    04 Error within control information of EDI subsystem
    05 Error during translation
    06 Translation OK
    07 Error during syntax check
    08 Syntax check OK
    09 Error during interchange handling
    10 Interchange handling OK
    11 Error during dispatch
    12 Dispatch OK
    13 Retransmission OK
    14 Interchange Acknowledgement positive
    15 Interchange Acknowledgement negative
    16 Functional Acknowledgement positive
    17 Functional Acknowledgement negative
    18 Triggering EDI subsystem OK
    19 Data transfer for test OK
    20 Error triggering EDI subsystem
    21 Error passing data for test
    22 Dispatch OK, acknowledgement still due
    23 Error during retransmission
    24 Control information of EDI subsystem OK
    25 Processing despite syntax error (outbound)
    26 Error during syntax check of IDoc (outbound)
    27 Error in dispatch level (ALE service)
    28 Not used
    29 Error in ALE service
    30 IDoc ready for dispatch (ALE service)
    31 Error - no further processing
    32 IDoc was edited
    33 Original of an IDoc which was edited
    34 Error in control record of IDoc
    35 IDoc reloaded from archive
    36 Electronic signature not performed (timeout)
    37 IDoc added incorrectly
    38 IDoc archived
    39 IDoc is in the target system (ALE service)
    40 Application document not created in target system
    41 Application document created in target system
    42 IDoc was created by test transaction
    Inbound Values::-->
    50 IDoc added
    51 Application document not posted
    52 Application document not fully posted
    53 Application document posted
    54 Error during formal application check
    55 Formal application check OK
    56 IDoc with errors added
    57 Test IDoc: Error during application check
    58 IDoc copy from R/2 connection
    59 Not used
    60 Error during syntax check of IDoc (inbound)
    61 Processing despite syntax error (inbound)
    62 IDoc passed to application
    63 Error passing IDoc to application
    64 IDoc ready to be transferred to application
    65 Error in ALE service
    66 IDoc is waiting for predecessor IDoc (serialization)
    67 Not used
    68 Error - no further processing
    69 IDoc was edited
    70 Original of an IDoc which was edited
    71 IDoc reloaded from archive
    72 Not used, only R/2
    73 IDoc archived
    74 IDoc was created by test transaction

  • How to Reprocess Outbound Idocs in Status 02 (Errors)

    Hi,
        I have an urgent problem. How do I re-process an Outbound IDoc in Status '02' (Error Passing Data to Port)
        I have tried reprocessing this IDoc through BD87 using both the options Edit>Process and Edit>Restrict and Process, but it doesn't work
         Please help as we are migrating cutover data from SAP to another system
    Regards,
    Aditya

    Worth to have a look at this thread
    Error handling problem with outbound idoc status 02 and  XML HTTP Port
    Regards
    Vivek
    Reward points for all the useful answers

  • Outbound Idoc 03 status - SM58 error

    Hi ,
    For Oubound Idoc, I am getting Idoc with status 03 but is not there in Receipient system.
    When I check Idoc in Sm58, Idoc has error <b>"The ABAP/4 Open SQL array insert results in duplicate database records".</b>
    Can anybody help me how to solve this issue?
    Thanks & regards,
    Yogita

    use FM idoc_status_write_to_database to change the IDoc status from 03 to 30 and then  run WE14 or  RSEOUT00 to change the status back to 03
    resending idoc from status 03 ...is a data duplicatino issue on receiving side...why do u need to do that ?
    Use WE19 tcode to debug
    In we19
    1)U can choose your Idoc number in existing Idoc textbox
    2)Press execute
    3)u will display ur Idoc struct
    4)Dbl click on any field then u can modify its content
    5)PressStd Outbound Processing Btn to process modified Idoc
    Thats it

  • File to Idoc - Outbound Error

    Hi,
       I am doing File to IDOC scenario. I got error
    in "Message has error status at outbound status" .. When
    I opend that messeage then i got this ...
    <SAP:IDOCTYP>ZIDOCIN</SAP:IDOCTYP>
      <SAP:CIMTYP />
      <SAP:MESTYP>ZMTIDOCIN</SAP:MESTYP>
      <SAP:MESCOD />
      <SAP:MESFCT />
      <SAP:SNDPOR>SAPX11</SAP:SNDPOR>
      <SAP:SNDPRN>Logi_01</SAP:SNDPRN>
      <SAP:SNDPRT>LS</SAP:SNDPRT>
      <SAP:SNDPFC />
      <SAP:RCVPOR>SAPA11</SAP:RCVPOR>
      <SAP:RCVPRN>A11CLNT200</SAP:RCVPRN>
      <SAP:RCVPRT>LS</SAP:RCVPRT>
      <SAP:RCVPFC />
      <SAP:TEST />
      Can any one tell me what to do to solve this.
    thx,
    Ansar.

    Hi,
    There is somethig worng with your Partner Function while defining the the Partner Profile, please check it. The Partner function is optionla and see if you need it
    Go thru the link,
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
    Thanks,
    Prakash
    Thanks,
    Prakash

  • Idoc at status 51, however outbound delivery created

    Hi Gurus,
    We have peculiar issue , where in outbound delivery is getting created through IDoc. The inbound idoc has status 51 however delivery got created.  Any idea how is it possible?.
    Thanks in advance.

    Dear Math,
    Have you got the solution for the above. If you get can you tell me please because even i got the same error message while processing the IDOC
    status 51 after status 53. Outbound delivery is updated but not the sales order.
    can you please help me

  • Error 26: Error during syntax check of IDoc (outbound)

    Hi all,
       I am getting error when we try to generate IDoc in Outbound process (to send data from SAP to external Interface).
      Error no is 26. And I have checked the status records, it shows the below error message. "EDI: Syntax error in IDoc (too many repetitions of a group). According to the syntax description of the basic type SHPMNT05 (customer enhancement ZSHPMNT05), the segment group E1EDL37 can be repeated a maximum of 0000000260 times. However, this segment group occurs more frequently in the IDoc. Please check the IDoc or the syntax description of the basic type SHPMNT05 (customer enhancement ZSHPMNT05).
      Can any one tell me is there any limitation for data records for segment E1EDL37?
      Kindly suggest me what is the problem & what needs to be done to fix this.
    Thanks in advance.
    Regards
    Mohammad.

    Hi Guys,
    This is a problem which occurs throughout lots of SAP systems. This occurs due to someone changing the IDOCSYN table without making the neccessary changes to the EDISYN table.
    For more information on this you can check out the note - 370021. Also if you run the following program in your system and make the changes to your IDOC segment, this error will go away.
    (Please note that this program is provided by SAP and I just made a small adjustment by adding the COMMIT WORK AND WAIT statement) .
    Hope this helps.
    REPORT ze1edp19.
    TABLES: idocsyn, edisyn, cimsyn.
    DATA: old_idocsyn TYPE idocsyn,
          lt_idocsyn  TYPE STANDARD TABLE OF idocsyn,
          ls_idocsyn  TYPE idocsyn,
          old_edisyn  TYPE edisyn,
          lt_edisyn   TYPE STANDARD TABLE OF edisyn,
          ls_edisyn   TYPE edisyn.
    PARAMETER idoc_typ TYPE idocsyn-idoctyp DEFAULT 'ORDERS05'.
    PARAMETER idoc_seg TYPE idocsyn-segtyp  DEFAULT 'E1EDP19'.
    PARAMETER occmax   TYPE idocsyn-occmax  DEFAULT '99'.
    PARAMETER upd_flag AS   CHECKBOX        DEFAULT space.
    START-OF-SELECTION.
    table IDOCSYN
      SELECT * FROM idocsyn
             INTO TABLE lt_idocsyn
             WHERE idoctyp = idoc_typ.
      READ TABLE lt_idocsyn INTO ls_idocsyn
                            WITH KEY idoctyp = idoc_typ
                                     segtyp  = idoc_seg.
      IF sy-subrc = 0.
        MOVE ls_idocsyn TO old_idocsyn.
        ls_idocsyn-occmax = occmax.
        IF upd_flag EQ 'X'.
          UPDATE idocsyn FROM ls_idocsyn.
         COMMIT WORK AND WAIT.
          WRITE: 'Table IDOCSYN updated',
                 /,'         Idoctype:      ',idoc_typ,
                 /'         segment number: ',ls_idocsyn-nr.
          WRITE: /,'OCCMAX changed from',old_idocsyn-occmax,
                 ' to ',ls_idocsyn-occmax.
        ELSE.
          WRITE: 'No UPDATE done in table IDOCSYN',
                 /,'         Idoctype:      ',idoc_typ,
                 /'         segment number: ',ls_idocsyn-nr.
          WRITE: /,'OCCMAX changed from',old_idocsyn-occmax,
                 ' to ',ls_idocsyn-occmax.
        ENDIF.
      ELSE.
        WRITE: 'no such record in table IDOCSYN'.
      ENDIF.
      ULINE.
    table EDISYN
      SELECT * FROM edisyn
             INTO TABLE lt_edisyn
             WHERE idoctyp = idoc_typ AND
                   cimtyp  = space.
      READ TABLE lt_edisyn INTO ls_edisyn
                           WITH KEY idoctyp = idoc_typ
                                    cimtyp  = space
                                    segtyp  = idoc_seg.
      IF sy-subrc = 0.
        MOVE ls_edisyn TO old_edisyn.
        ls_edisyn-occmax = occmax.
        IF upd_flag EQ 'X'.
          UPDATE edisyn FROM ls_edisyn.
          WRITE: 'Table EDISYN updated',
                 /,'         Idoctype:      ',idoc_typ,
                 /'         segment number: ', ls_edisyn-posno.
          WRITE: /,'OCCMAX changed from',old_edisyn-occmax,
                 ' to ',ls_edisyn-occmax.
        ELSE.
          WRITE: 'No UPDATE done in table EDISYN',
                 /,'         Idoctype:      ',idoc_typ,
                 /'         segment number: ',ls_idocsyn-nr.
          WRITE: /,'OCCMAX changed from',old_idocsyn-occmax,
                 ' to ',ls_idocsyn-occmax.
        ENDIF.
      ELSE.
        WRITE: 'no such record in table EDISYN'.
      ENDIF.

  • 26 Error during syntax check of IDoc (outbound)

    Hi Experts
    I am using TPSDLS - Idoc(outbound).
    When we view in WE02 : for few of the deliveries it is working fine , but for some it is giving the following error
    26     Error during syntax check of IDoc (outbound)
    Please any one help me out for the same
    Thanks & Regards
    Shaveta

    Please check the segments for the idocs in error status in WE02. The segments in the idoc should be in the same sequence as defined while creating idoc in WE30.
    For eg. taking the case of invoic02 idoc.
    Segment E1EDP01 cannot come prior to segment E1EDK01.
    As in WE30 it is defined to come after E1EDK01\
    Please reward the points if this information is useful.

  • Error while posting the IDOC. Status message '56'

    Hi,
    I have a requirement where I will post an IDOC which inturn will split the original IDOC into child IDOCs based on the store value.
    I am trying to post the IDOC in WE19. So, the Original IDOC is posted successfully with status '53'. Whereas, the child IDOCS finished with error. The status of the message is '56' and the error says 'EDI: Partner profile not available'. Could someone tell me what could be the reason for this..?
    Actually, the IDOC was created by the Functional Consultant. So, should the partner profile creation also done by them or do we need to do anything to solve this problem.? Could someone answer me this question. Thanks in advance.
    Best Regards,
    Paddu.

    It looks like the control data for the child segment is not getting populated. you have to find the code which populated the control data and see if it is doing what it should.

  • 5 IDOC with status 29 Error in ALE service

    hi there,
    im looking at this similar problem with less information on me the only info i got is this can anyone help me out pls
    IDOC Status Outbox:
    IDOC failure between 13/07/2008 to 14/07/2009
    1 IDOC with status 02 Error passing data to port
    5 IDOC with status 29 Error in ALE service
    IDOC Status InBox:
    88 IDOC with status 51 Application document not posted
    regards
    raju

    Hi,
    Check this thread.
    DB13-DBCHECK by saving log-throwing DUMP:TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
    Regards.

  • Idoc- can we sent already sended idoc if status is showing error message

    hi
    Idoc- can we sent already sended idoc if status is showing error message
    without making any changes.
    Thanks in advance.

    Hi raja,
    IN BD87.
    give the idoc number,its status,messagetype and partner system and resend it.
    Regards,
    nagaraj

  • IDoc outbound errors - mail send step in WF to send info-mail to enduser

    Hello specialists
    I searched quite a lot in the forums now. I found lot of info but nothing regarding my issue.
    I need to send an info-mail to the end user creating purchase orders. But only if the idoc (outbound ORDERS) could not be sent (failing for some reason, i.e. if rfc connection fails). This is what I've done to achieve this:
    - in WE40 I linked my WF to process code EDIO
    - the WF-BATCH user has an email address assigned to it (in SU01)
    - the mail sending step in my WF is configured like this:
    recipient type = G (organizational object)
    Expression = &_WORKITEM.CREATEDBYUSER.ID& (this contains the enduser id)
    subject = Test for &WORKITEM.CREATEDBYUSER.ID&
    When testing the mail can not be delivered (error SO23).
    When setting recipient type to U (E-Mail address) and giving a valid e-mail address, then it works fine (SCOT, etc. is configured and mailing to external systems works). But setting the e-mail address hard coded style in the mail send step is not an option here!
    It seems that the send mail step (SELFITEM.SENDTASKDESCRIPTION) always requires a valid e-mail address. Is it not able to handle SAP user id's ?
    Thanks in advance for some guideance on this one.
    Renaud
    Edited by: Renaud Desarzens on Feb 11, 2010 3:00 PM

    Hello and thanks for your help.
    I was able to solve it like this:
    - don't use mail send step
    - instead, add new activity with a new task (SELFITEM.SENDTASKDESCRIPTION)
    - in the bindings (workflow -> step) set:
         B --> &TYPEID&
         &_WORKITEM.CREATEDBYUSER.ID& --> &ADDRESSSTRINGS&
    Seems that the mail send step doesn't allow TYPEID to be "B" because each time I tried to tweak the generated bindings that way it messed up the recipient type and expression I set before.
    Regards
    Renaud

  • SAP to XI IDoc Outbound Error

    Hi,
    I am sending an IDoc from SAP R/3 to SAP XI . In WE02 IDoc showing Status as 03 (sucess) but in SM58 it showing as Error
    *No service for system SAPTI2, client 030 in Integration Directory *
    Any Info?
    a®

    Got answer from XI forum

Maybe you are looking for