Idoc Output type

Hi,
I am using output types to trigger Idocs whenever a sales order is created or changed using EDI as output type. ORDERS05 Idoc type is triggered whenever a sales order is created/changed. But along with that outbound Idoc type, an Inbound Idoc is also getting created of type ORDERS05 which is not desired. Any Ideas why is it so?
Thanks

..

Similar Messages

  • IDoc output type not getting configured in IDoc-File scenario

    Hello
    I am having IDoc to file scenario where I want to post Delivery Document to legacy system. For this I have configured following EDI configuration for Delivery through NACE transaction
    1] Created output type
    2] Created partner function as EDI LS for this output type
    3] Configured RSNASTED as Processing Routines for output type
    4] Included this output type in the Header output procedure
    5] Configured XI system as the partner in partner profile with appropriate Message control
    Still when I attempt to include this output type in the Delivery it gives me "Output for partner could not be configured". The detail message says "In Customizing, the 'CannotBeChanged' indicator has been set for output type".
    I checked in SPRO but could not find such flag.
    Does anyone had came across such output type configuration.
    Thanks in advance.
    I know this question might be not appropriate in XI forum as it comes under EDI but it has become necessary for XI profs -:)
    Regards
    Rajeev

    Hi,
    Please check the following
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    Copy NEU to ZNEU or YNEU
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type ZNEU or YNEU.
    G.Ganesh Kumar

  • VF01 Invoice posting / Idoc output type / Paretner Profile missing

    Hi,
    I need a functionality to create ABAP code to send email, but I do not know in which place it would be the best to put it.
    While posting an invoice VF01 t-code, output type idoc is defined and normally is generated. Altghough sometimes partner profile is missing (it is customer number) and then idoc is not generated.
    I use standard program RSNAST and edi_processing form for idoc generation.
    1) is edi_processing form executed when partner profile is missing?
    2) where would it be the best to put abap code to send email?
    Thank you

    Hi,
    I have seen the stded program RSNASTED and the routine EDI_Processing.
    1) Yes Edi_Processing is executing when if the parnter profile is missing
    2) I think there Perform in the rotuine EDI_PROCESSING
       " PERFORM READ_PARTNER_PROFILE USING HELP_RETURNC." after this  excuting this perform , check for the return value and if EQ ZERO thn proceed further or Else send a mail .
    Thankz
    Aditya

  • Propose Custom Idoc, output type issue

    Dear Experts,
    I want to populate a custom idoc(Idoc already existing) by proposing the output type in the purchase order for which I created a output type and made an entry in Application 'EF' (NACE),
    Also created a process code thru we41 and assigned both of these in the outbound parameters of the partner profile.
    But for some reason I'm getting an error while propsing and saving the purchase order, Is there a way that I can identify why the error occurred.
    Or can some one shed some light if I need to do any extra configuration if I'm playing with a custom Idoc.
    Thanks for all
    -Amit

    >
    Vinod Kumar wrote:
    > Have you done the partner profile configuration in WE20.  Have you mentioned message control? What is the exact error which is appearing while saving PO?
    >
    > Regards
    > Vinod
    Vinod,
       I did all the partner profile configurationand maintanied message control too, While saving I'm not getting any error, but after saving, if I go back to the output type and see the output is in Red coulor (Indicating failure), I'm not sure how to check where the error occured.
    Thanks
    -Amit.

  • IDOC output type configuration

    Dear All,
    We are integrating with another system for warehouse management and delivery note print out will be taken from third party system once delivery is created in SAP. When delivery is created, and IDOC DESDAV will be sent to third party system which carries all necessary information for delivery note.
    My question is, to trigger DESDAV IDOC  I have copied LALE output type and changed some setting. I have maintained condition record .
    The settings are : Access Sequence  : 0008, Access to condition, Send with periodically scheduled job, Tran mission medium: Distribution ALE,
    Since the process is as i am sending to third party system not to a specific partner , i have deleted the partners assigned in the standard " SP" and left the field blank in partner function.
    When i create delivery, this output put is appearing twice in Determination analysis,  and not appearing automatically. when i maintain manually, system is asking for partner(SP).
    How do i maintain the third party system as my partner. I have two questions here
    1) Output type is not appearing in Delivery
    2) should i maintain the third party system as sold to party SP or LS(logical system)
    Kindly guide me.
    Note: I have maintained the output type in IDOC - DESDAV and when IDOC triggered manually, IDOC is getting generated.
    Regards
    Fazal

    Hi Santhosh,
    I am able to trigger IDOC now and below are my setting.
    Maintain Partner function LS in output type
    Maintain partner role "LS" in WE20 which i have not maintained.
    Creation of condition record with Dispatch time - Send immediately
    Now i am able to trigger IDOC when Delivery is created. Thank you for help.

  • SD IDoc (output type RD04) requires posting on 2 separate ERP system

    Dear Experts,
    I am migrating current SAP system  (v4.0B) to ECC6.0.
    This is done by phases.
    Currently, there are SD transaction on Intercompany customer posted through output type RD04 (EDI).
    When ECC6 go live, the transaction above would be created on ECC6 and requires posting to Intercompany accounts still on 4.0 system. Please advice on how:
    1.  the EDI posting be routed from ECC6 to 4.0 system.
    2. the successful posting message be captured from 4.0 system to ECC6.
    TQVM

    Dear Experts,
    I'd appreciate your input on my inquiry.
    Tqvm

  • Assign an output type to a message type

    Hi all,
    How do I assign an output type to a message type?
    Thanks in advance.
    JM

    You maintain the output type determination settings for the inbound and outbound delivery handlers, so that output types can be determined for deliveries, pursuant to the message control mechanism.
    <b> a.      You maintain the output types in Customizing for Logistics - General ->upply Chain Planning Interfaces (SCPI)-> Auto-ID Backend Integration->IDoc Processing ->Operational IDocs -> Output Type Determination -> Output Type Determination for Inbound/Outbound Deliveries-> Maintain Output Types</b>.
    reward points if it is usefull....
    Girish
    <b></b>

  • Configure output types

    How do i configure the system for a idoc output type????
    Can someone provide screen shots or step by step approach.
    mail id : [email protected]
    Regards

    HI,
    Check out these for configuration:
    http://help.sap.com/bestpractices/BBLibrary/documentation/A02_BB_ConfigGuide_EN_US.doc
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a9243b111d1896f0000e8322d00/frameset.htm
    Thnx
    Chirag

  • Output type not created for outbound delivery while using SHMNT05 idoc type

    Hi Experts,
    Please help me to solve the below issue.
    Problem:- I want to to generate an IDOC(using type SHPMNT06) once the PGI is done for an outbound delivery.
    Already it is working fine when used DESADV.DESADV01 or DESADV.DELVRY07. But now the output type is not getting created when used SHMNT.SHPMNT06. I have created a separate output type ZPJ7 just as a mirror copy of the earlier output type(ZPJ6) used for DESADV.DELVRY07.
    Question:- Is it possible to use idoc SHPMNT06 instead for DESADV01 or DELVRY07? If yes then what are steps to be followed?
    The reason why SHPMNT06 idoc is planned:- We have a scenario to send outbound delivery to 3rd party system via XI. If the outbound delivery is for National(Not for Export) and PGI is completed then send the idoc straight forward to XI otherwise DO NOT generate the idoc, but just create the delivery. Collect all the deliveries in a transport and send it in a shipment. The shipment details can be sent using SHPMNT idoc. Now from XI perspective, if we can utlitze the same SHPMNT idoc for the National delivery(1st case) then perhaps this will require less effort. Hence shipment idoc is required to be generated when the delivery is created and PGI is done.
    Also it would be great if you can advice some better way to solve above mentioned scenario.
    Many Thanks,
    Sanjay

    There could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
    If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
    If thats done already then check whether you have maintianed the condition record.
    If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
    regds
    Jude

  • EDI - 753Routing Request and 754 Routing Instructions transactions- what SAP ECC6 EDI output type, msg type, msg code, basis idoc is best practice to generate the idoc?

    One of our Trading Partner wishes to implement the 753 Routing Request and 754 Routing Instructions.  Can anyone give me best practice answer the following Questions?  We are on SAP ECC6 R3
    What Application? i.e. V2, V7?
    What output condition to use?  i..e. LALE, LAT2, SEDI????
    What Message type?  i.e SHPADV?
    What Basic Idoc Type? i.e SHPMNT05?
    What Message Code?  i.e. SHPM?
    What Process Code?  i.e. SHPM??
    What Function Module? i.e. IDOC_OUTPUT_SHPMNT??
    Does the SAP Transpotation Module have to be configured for this to be implemented?
    Your comments are greatly appreciated, we have until Nov 1 to be compliant?

    Good Morning,
    While I did not get any responses from my question, yes, I was able to determine what needed to be configured.   I hope the below will help you: This is for SAP ECC6
    The output application for the 753 Routing Request is "V7"
    The output type is "SEDI"
    Transmission medium is "6"
    The Basic Idoc type is "Shipmnt05"
    when setting up your Partner Profile (WE20) add:Message Partner Role "SP" with Message type "SHPADV', Message coed "753", Basic Type "SHPMNT05", Message Control add Application "V7", Message type "SEDI", Process Code "SHPM".
    also http://scn.sap.com/thread/698368 pages 14 and 15 were helpful.
    I have not configured the Inbound 754.  For now the inbound 754 Routing Instructions will be emailed to our traffic department.
    Thank you,
    Have a great day,
    jane

  • MM Purchase Order IDOC NEU output type configuration

    Hi All,
    after creation of Purchase Order in ME21N in ECC 6.0 server, i want an IDOC for Purchase order to be created...........
    i saw there is a standard output type NEU and it has EDI and Distribution Model as medium..........
    when i went to ME21N and specified in message button output type of NEU, then the PO which i created had a NEU in messages but on opening  a new session and running ME21N and creating a second PO, then in this PO there is no output type for NEU....
    So i want to know in SPRO where is the exact location which specifies which output type will be triggered for IDOC creation on PO creation in ECC for message control...............
    plz help guys...........

    Hi,
    If it configured for EDI and Distribution Model , now check condition record in T.code:MN06{ if you are geeting for one PO, you should get for other PO also)
    Also check the following confi. details for Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select: 
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order{NEU}
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create ,,,use medium '6' 
    Now you create PO (ME21N) and save it and then release.
    Also check in NACE t.code for standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines and for the output type for default values, a communication strategy needs to be maintained in the Customizing that supports . You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy).
    Regards,
    Biju K

  • Outbound output type & Idoc type for MIRO (Invoice Posting)

    Hi Gurus,
    I have requirement like , I want to send the outbound IDoc to a external system containg the invoice detials after Saving in MIRO.
    I am not able to find any output type & Idoc type for the same.
    By going through varios threads , I found that there tell there is no Idoc type & output type for sending Idocs after MIRO.
    Kindlt let me know, if it so, or how this req can be fullfiled by other ways.
    Thanks
    Amresh

    Hi,
    Create Custom Idoc type with required fields,custom output type and assign it to partner profiles.(If there is no std idoc type or output type)
    Use Funtion module MASTER_IDOC_DISTRIBUTE to generate Idocs while saving MIRO, for this you need to find exit or implement implicit enhancement while saving MIRO.
    Regards,
    Ashok.

  • Trigger Idoc by using the Output type in Z function module

    My requirement is when I run Z function module then  Idoc should be send which is configured in Output Type.
    Means when ever i run the Functional module that Output type should be triggered.?
    Does any one have solution??

    Hi,
    Remove the Material Class from Importing Tab and Place the same under Tables Parameter.
    Regards,
    SRinivas

  • If output type is missing in PO, can system create a Outbound IDOC for that

    Hi
    Scenario: sales order should get generated in anoter system once PO is saved in first system. But this is not happening for a new vendor. I checked & found that output type is missing in PO. Asked user to provide  another PO for which SO was created. I checked that PO, here also output type is missing.
    I am surprised that if output type is missing in PO, can system create a Outbound IDOC for that PO? If yes then I am not aware of this process.
    Please help me in analyzing this problem.
    Regards
    Sapmm12

    Hi Sridhar,
    Thanks for your replay.
    I checked for other vendor also. condition records does not exist in NACE  for any of them. But user is claiming that sales aorder is getting created for those PO. Though I have asked them to provide the sales order number & possibly outbound IDOC number for at least one vendor.
    I tried to search IDOC number with reference to PO number but system is taking too much time & ending with run ime error. Because I do not have details of partner, receiver not even message type. Neither I have any process document which can explain how this process works?
    any other approach which may work here?
    Regards
    sapmm12

  • How to create an IDOC as an output type for an SAP standard transaction

    Hi ,
    How to create an outbound IDOC as an output type for an SAP standard transaction.
    Regards,
    Beena

    In NACE tcode u can create output type with medium as EDI,
    u can assign the entry sub routine as ENTRY_EDI in RNASTED

Maybe you are looking for