Idoc PEXR2002 is not getting tiggered frm T-Code F110

Hi All,
I need to trigger the Idoc PEXR2002, from the T-Code F110. The payment process is successfull, but the Idoc is not getting triggered. I am not able to find the exact reason for that.
We have a tab with name printout/data medium and it has got the following programs in it 1. RFFOAVIS 2. RFFOEDI1 3. RFFOUS_C. Is there any thing I need to do with these??
Please help me..
Thanks
Suma.

Hi suma,
Now i have requirement to generate payment file
whan we execute F110 using enhancement IDOC(EDI) . I want to know ,by which method i can trigger
IDOC ( by message control ,work flow or standard program) .if it is message control what is process
code for this.
I think u have worked on this .if u have information abt this plz forward me .
Thanks & regards,
Balu.

Similar Messages

Inbound Idoc - Date fields not getting saved

Hello,
I have created inbound idoc scenario in SAP. I receive Idoc from non SAP system to SAP system.
then data from IDoc is saved into different tables, for that I have written one function module (attached to process code)
One of the segments in IDoc type has date as a field. It is of type sy-datum.
When I receive Idoc in SAP only date fields are not getting saved in tables.
Is anything specific need to be done for date fields? please advice.

check which format you are getting into sap and make sure you are coverting in into required format.

Idoc - Partner Function not getting captured.

Dear all,
I am using IDOC (type - /NFM/ORDERS05) to send a Purchase Order. The Idoc is getting created but the only a few partner function is getting captured from the Partners tab in the ME22n transaction. The remaining partner functions that are not captured are SP (Forwarding Agent) and ER (Employee responsible).
Any bright ideas how to solve this problem.
Points will be awarded.

Hi Vivek,
Thanks for your reply.
1. Where do i have set the receiver port and the message type for each "partner fuction". We do this generally for a Partner Type. (Please clarify)
2. If I remove the syntax check box then my PO is not getting created in ME21n transaction.
3. I have checked the Partner types there is not problem with that.
Regards,
Gajanan.

IDOC - Function Exit not getting triggered

I am doing an inbound IDOC for the message type WMMBXY and using basic type WMMBID02.
This is for goods movement based on PO.
I am doing an enhancement in the includeof the function module exit EXIT_SAPLLMDE_002.
This exit is supposed to get triggered for the message type WMMBXY.
when i tested the idoc in we19 it is sucessfully getting posted. I want to check my code in EXIT_SAPLLMDE_002. I have set breakpoint and tested using we19. But this is not getting triggered. But the idoc is getting sucessfully posted but with a status message 56 An inbound partner profile could not be found( I am not sure if this has something to do with above problem).

Did you attach your exit to a CMOD project and activated the same(CMOD transaction)?
The error you see regarding the partner profiles is probably due to the non existance of a partner profile for your idoc type in we20 transaction.
Maintain the inbound partner profile in we20 transacttion.

With Holding Tax provided in IDOC FIDCC2 is not getting updated in Acc Doc

Hi All,
I am Posting a Accounting document in R/3 though Idoc FIDCCP02.
This idoc has With holding Tax info segment as E1FIXWT. i gave all the info in this segment, like Tax code, Tax type , Withholding tax base amount (local currency) , Withholding tax base amount in document currency, Withholding tax amount (in local currencyand Withholding tax amount in document currency
However, when the Idoc gets posted,and the accounting document gets generated the With holding tab does not get populated in SAP.
Please let me know your inputs, that why the woth holding tab is not getting populated with the relevant info from Idoc.
Thanks in advance

Hi,
I have the same issue. But as the idoc is generated in a SAP system of the same release I would have expected that the withholding tax data is already complete. Also are no withholding tax info populated in IT_ACCTX. There only VAT is visible. I suppose IT_ACCWT was meant.
Anyone any idea?
Regards
Stefanie

IDOC status 64 not getting processed.

Hi Gurus,
      I have a problem where IDOC's with status 64 are not getting processed via background job. the IDOCs weere getting processed with the background job till today evening, but suddenly no changes were made and the processing of IDOC's with status 64 has stopped and they keep filling up, when i checked the log of the Background job it says finished, and the log has the following information,
17.09.2009 19:05:23 Job started                                                                   00           516          S
17.09.2009 19:05:23 Step 001 started (program RBDAPP01, variant POS_IDOCS, user ID SAPAUDIT)      00           550          S
17.09.2009 19:05:25 No data could be selected.                                                    B1           083          I
17.09.2009 19:05:25 Job finished                                                                  00           517          S
Kindly advise on this.
Regards,
Riaz.

When i process the IDOC's using BD87, they gets processed wiwth out aany issues no dump is displayed, idoc gets a status 53 after processing via BD87.
There is another problem how ever there are other jobs scheduled to run in the background other than this background job which are getting cancelled and have two different error logs for different jobs they are as follows.
1) 18.09.2009 02:00:06 Job started                                             00           516          S
18.09.2009 02:00:06 Logon not possible (error in license check)             00           179          E
18.09.2009 02:00:06 Job cancelled after system exception ERROR_MESSAGE      00           564          A
2) 18.09.2009 00:55:27 Job started                                                          00           516          S
18.09.2009 00:55:27 Step 001 started (program RSCOLL00, variant , user ID JGERARDO)      00           550          S
18.09.2009 00:55:29 Clean_Plan:Gestartet von RSDBPREV                                   DB6PM         000          S
18.09.2009 00:55:29 Clean_Plan:beendet                                                  DB6PM         000          S
18.09.2009 01:00:52 ABAP/4 processor: DBIF_RSQL_SQL_ERROR                                00           671          A
18.09.2009 01:00:52 Job cancelled                                                        00           518          A
This is a production server and the Licence is valid till 31.12.9999, and has no issues with the license.

HIREDATE & FIREDATE of Employee are not getting updated in t-code PA20.

Hi all,
HIRE DATE & FIRE DATE are not getting updated whenever the data of an employee loaded into SAP T-Code PA20 .
And even the input data contains the both the fields HIRE DATE & FIRE DATE
Can any one please suggest us why its happening.
Thanks,
Lava.

Hi Girishkg,
The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
The limit can be set in web application’s web.config file or in IIS .
There are two detailed articles about setting the limit:
http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support

TDS is not getting reversed in T.Code: F-54 -Clear Vendor down payment

Hi,
Please help on the below issue:-
1. We passed one entry relating to down payment for fixed asset. We deducted TDS also (50% down payment).
2. We passed MIRO also. There we deducted TDS on full value of invoice amount.
3. While making T.Code: F-54-clear vendor down payment, TDS is not getting reversed.
Thanks in Advance.
Regards
Srinivas

Hi,
Please check whether the Challan has been done for both downpayment & invoice before downpayment clearing was done.may be That is why the system doesn't consider reversal of wht at the time of downpayment clearing as tax has already been remitted.Please refer with_item table. The int challan number & dateare for the downpaynment & for the invoice.
Hope this helps.
Regards
Ravinagh Boni

I'm not getting my apple verification code

Im not getting my 2-step verification code

Use your PIN and send the code via SMS to an authorized device: Frequently asked questions about two-step verification for Apple ID - Apple Support

File to IDoc scenario-CREMAS not getting posted

Hi Experts,
i am doing a file to idoc scenario in which i am giving the xml file from MDM ,consisting of Vendor Master data and posting the address and the general data into the ADRMAS and CREMAS idocs into the R/3 system.
The problem that i am facing is that the ARMAS is getting posted correctly but the CREMAS is getting posted with the red signal,status 51.It says "Not authorized to change the Vendor Centrally."
Can anyone please tell me what is the reason and the solution for this problem?
Is this a data error or XI error?
Thanks in advance,
Shweta.

Hi Shweta
Status 51, 52 means Posting error
Please check wheteher all the configuration has been done or not
SM59-rfc destination
IDX1-port
IDX2-load metadata
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
After That check the solution it is due to Authorization
File to idoc - IDX5 Error
Regards
Abhishek Mahajan
*Please reward points if helpful**

Inbound IDOC receiver port not getting filled in

Hi All,
I checked the WE20 configuration and it is fine. Just wanted to check if there is any other sap configuration which might be missing.
The IDOC is coming from a web server and they confirmed that they are filling the receiver port information while sending, but in the IDOC that we receive in SAP the receiver port is coming as blank.
Any pointers will be appreciated.
Thanks,
Anil

Hello Anil,
When they say they are filling receiver port that means they filling EDIDC-RCVPRT, please note with out receiver port you will not be able to receive the Idoc.
It means this value might be cleared somewhere in SAP. may be user exit or BADI or enhancement. what you can do is try to create inbound idocs by populating receiver port using WE19 and check whether the created idoc contains this value or not.By doing the you can get an idea where this value is disappered.

Idoc Extension name not getting populated

Hi all
I have extended the idoc INVOIC02 and inside the exit- EXIT_SAPLVEDF_002, i m writing code for custom segments. Now the problem is, i am not able to see my idoc extension name in the importing parameter(CONTROL_RECORD_OUT-CIMTYP ) of the exit FM .
I have maintained the partner profile (with same extension), distribution model and WE82 config. Please let me know, any config. is required, so the extension name will get populated.
Vinoth

Hi
Check in the WE57 where Link is maintianed for Message type Idoc type and Idoc extension is attached to FUnction Module
and check the Process code.
Prabhudas

IDoc output type not getting configured in IDoc-File scenario

Hello
I am having IDoc to file scenario where I want to post Delivery Document to legacy system. For this I have configured following EDI configuration for Delivery through NACE transaction
1] Created output type
2] Created partner function as EDI LS for this output type
3] Configured RSNASTED as Processing Routines for output type
4] Included this output type in the Header output procedure
5] Configured XI system as the partner in partner profile with appropriate Message control
Still when I attempt to include this output type in the Delivery it gives me "Output for partner could not be configured". The detail message says "In Customizing, the 'CannotBeChanged' indicator has been set for output type".
I checked in SPRO but could not find such flag.
Does anyone had came across such output type configuration.
Thanks in advance.
I know this question might be not appropriate in XI forum as it comes under EDI but it has become necessary for XI profs -:)
Regards
Rajeev

Hi,
Please check the following
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Copy NEU to ZNEU or YNEU
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type ZNEU or YNEU.
G.Ganesh Kumar

IDoc meta data not getting imported

Hello
I am trying to get IDoc meta-data using transaction IDX2. I have configued RFC destinations of type R3 in both the systems (ECC and XI). Also I have created port using transaction IDX1.
When tried to import MATMAS04 using the defined port it gives Information box displaying "I::000" and nothing happens. The information box does'nt contain any message.
Anybody faced this problem with IDoc?
Thanks in advance.
Regards
Rajeev

Hi,
actually it was authorization problem which I noticed when I checked the short dump in ECC.
anyways thanks for the reply.
Regards
Rajeev

VALUES not getting passed in t.code 'FMY3' VIA call transaction 'FMY3'

hi guru's,
i have created a ALV report for funds precommitment,when i click the document number,the respective document is not opening
i have coded like this
IF selfield-value IS NOT INITIAL.
        READ TABLE final INDEX selfield-tabindex.
        SET PARAMETER ID: 'KBL' FIELD final-belnr,
                          'KBP' FIELD final-blpos.
        CALL TRANSACTION 'FMY3' AND SKIP FIRST SCREEN.
      ENDIF.
the transaction is called,but with empty value in the field and the document is not opening....please help me with this regard...
    thanks in advance,
regards,
Balaji.S

Hello Venkat.O,
i have a similar problem with the overwrite of the memory ID, when calling transaction FMY3. In the code block you mentioned, the system gets the right value from the memory ID, that i've set before calling the transaction. But i found that after that the system runs in the include LFMFRO01, the code
MODULE init_suppress OUTPUT.
IF status2 = st2_app.                "/Genehmigen/Ablehnen
Lesen aus Memory: wird in WF-Methode 'APPROVE' gefüllt
    IMPORT wfdata TO g_f_wfdata FROM MEMORY ID con_memid_wf.
    IF NOT g_f_wfdata-belnr IS INITIAL.
      IF g_f_wfdata-blpos = space.
        g_f_wfdata-blpos = con_initial_blpos.
      ENDIF.
      kbld-belnr = g_f_wfdata-belnr.
and here the system gets the memory of the last document created and overwrites the selecion-screen field KBLD-BELNR with that value. And the value i had stored in the parameter ID 'MRV', and that the system gets it right in the code you show, is overwritten..
This seems like a bug from SAP, don't you think?
This way the system will always show the last doc. when calling transaction, after setting a parameter ID..

Idoc PEXR2002 is not getting tiggered frm T-Code F110

Similar Messages

Maybe you are looking for