IDOC posted to PI server - not able to view the posted idoc

Dear All,
i have done the ALE setting in both ECC 6 and PI side,when
R/3 Side
Logical System - T90CLNT090 and PI7CLNT001
RFC Destination - T90CLNT090
Port - A000000040 (created under TRANSCTIONAL RFC)
Partner Profile - T90CLNT090 (Created under Partner Type LS - Logical System)
Distribution Model - Distribution Model -XXXXXXXXX (Cremas, Matmas, Oilmat and Orders)
PI Side
RFC Destination - PI7CLNT001
Port - SAP001
but my query here is when I post the idoc using BD10, I could see the Idoc(s) has been successfully posted to PI
when I checked in the we05, it is getting posted into other port XI_00_800 in the same EC 6 system.
I do not see any idoc(s) we05 received in the PI system.
Can anyone help me, where i have gone wrong in configuring ALE settings.
Regards
Blue

Hi,
check the below.
1. To which logical system/port the RFC destination XI_00_... is associated to ..
2. Also check the distribution model contains the appropriate logical systems associated..in that..
generate the partner profiles using the distribution model so that if you havenot created properly it will generate automatically by correcting the same...
HTH
Rajesh

Similar Messages

Not able to view the webhelp output in Robohelp 9

Hello,
I am in a project where we have to create webhelp output from Robohelp 9. Whenever I generate the webhelp ouput I am not able to view the the contents. Although, the webhelp is opening in a browser window but there are no topics present in the contents. The other ouputs like .chm and .dox are fine, but there is some problem with the webhelp which I am unable to figure out.
Regards,
Ruso

What browser are you using?
If Chrome, try something else. Chrome works fine with help on the server but not locally. There is more in Snippets on my site about the Chrome issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Not able to view the journal options in HFM

Hi Experts
1. Journal posted but am not able to view the journal option in the left handside. What would be the reason?
regards
Smilee

Hi,
Can you check once access rights of your login credentials.
Regards,
Sasi

Not able to view the WEBINAR presentations

Hi,
I'm not able to view the e-learning presentations@ https://www.sdn.sap.com/irj/scn/xi-elearning.
Only links that ends with WEBINAR replay or presentation are not able to viewed.
I have installed webEX player, still I'm not able to read the links.
could anyone help on this issue.
Thanks,
Gupta.

Hi Gupta,
I have checked the same link, and clicked on first link
Business Level Modeling for Business Process Experts and I am able to view the e-class session. Just check you have allowed Pop-up. As the webinar reply is opening in a new Pop-up window.
Else, Post you question in [Suggestion and Comments|SCN Support; forum.
Sachin

Not able to view the previlages of the user in XIR3.1

Hi,
We have migrated from XI R2 to BOE xi 3.1 with SP3 in Unix.I am not able to view the previlages for the user in XI 3.1which it is there in XIR2.
Please provide the solution.
Thanks,
ReksRon

Hi,
1. I have installed BOE XI 3.1 with SP3 in solaris and BOE XI 3.1 with SP3 having customized installation with Xcelsius server in Linux enironment.
2. Added the xcelsius server in solaris which is the distributed environment.
3.I have migrated users,groups,folders,reports,universe,profiles from XIR2 to BOXI 3.1. which is in Solaris environment by using Import wizard.
4. When I logged into the infoview in BOE XI 3.1 as a user.I am not able to see the folders.But which I could able to view those public folders in XIR2.
Please let me help out.
Thanks,
ReksRon

Not able to view the content in Microsoft help viewer (MS VS 2012)

Hello Team,
I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
We tried many settings in IE but still not able to resolved. So i need more expert help.
My customer having one issue-
# User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
Thanks,
Rahul B. Patil.
+919972004298.

Hi Sri,
it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
Best regards
Xu

Need help with imovie photos extension. I am not able to view the editing tools no matter what I do!!!! Help please ASAP

I Have read a lot of tutorials or whatever but Im not able to view the editing tools from imovie in the photos app. I have tried the trimmer thing and the yellow outline does appear but the only options available are "play, trim or cancel". I really really want to use the filters and stuff so please help me if you can!
Thanks!

Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
iTunes Support -
http://www.apple.com/support/itunes/

I just bought a new printer for my iMac version 10.7 but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!!

I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!

I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!

Not able to view the graphical elements in APD

Hi Experts,
Not able to view the graphical elements for all applications such as:
Nodes
Data flow arrows
in my APD workarea.
I have all the authorization for APD according to the SAP OSS Note 919614.

Hi Experts,
Any input on this?
Regards,
Meiyappan.

I am not able to view the default view of FF 4.0, It is showing menu bar with the windows border. When i turn off menu bar, the strip which should be present above the tabs goes missing.

I have recently downloaded FF 4.0 and using a lot of add-ons. I am not able to view the default view of FF 4.0 with no menu bar. Even after turning off the menu bar from customization, I am able to see only the tabs and FF button, but not the strip over the tabs.

When you hide the menu bar to display the Firefox button, the titlebar (strip above the tabs) is only displayed if the Firefox window is not maximized. If you always want the Window titlebar, you can use the Firefox 4 UI Fixer extension - https://addons.mozilla.org/firefox/addon/firefox-4-ui-fixer

Not able to view the window when I run cim.bat file

I have installed ATG web Commerce 10.0.3 and I need to configure MySql. For that I need to Start CIM by running the following file: <ATGdir>\home\bin\cim.bat and later I have to Type P to choose the products to configure, at a minimum ATG Platform and ATG Content Administration. But when I am not able to view the window to proceed further when I run thecim.bat file.Please let me know if anyone has any idea about this.

Hi,
Please find the error log while running in the command prompt.
C:\Documents and Settings\******>c:\ATG\ATG10.0.3\home\bin\cim.bat
Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version n
umber in .class file
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
4)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at atg.core.util.BeanUtils.instantiate(BeanUtils.java:427)
at atg.core.util.BeanUtils.getBeanInfo(BeanUtils.java:395)
at atg.nucleus.SimpleComponentState.getComponentClassDescriptor(SimpleCo
mponentState.java:547)
at atg.nucleus.SimpleComponentState.<init>(SimpleComponentState.java:91)
at atg.nucleus.SimpleConfigurationState.<init>(SimpleConfigurationState.
java:93)
at atg.nucleus.PropertyConfiguration.configureService(PropertyConfigurat
ion.java:756)
at atg.nucleus.Nucleus.<init>(Nucleus.java:832)
at atg.nucleus.Nucleus.<init>(Nucleus.java:717)
at atg.nucleus.Nucleus.startNucleusCheckLicense(Nucleus.java:4144)
at atg.nucleus.Nucleus.startNucleus(Nucleus.java:4021)
at atg.cim.SessionContext.startNucleus(SessionContext.java:632)
at atg.cim.SessionContext.startNucleus(SessionContext.java:610)
at atg.cim.flow.CimFlowCreator.startDefaultCimFlow(CimFlowCreator.java:7
4)
at atg.cim.Launcher.startCimFlow(Launcher.java:168)
at atg.cim.Launcher.main(Launcher.java:68)

Not able to view the 'proxy-to-remote' iView under 'user admin' role

Hi All,
I am not able to view the 'proxy-to-remote' iView under 'user admin' role. I need this for Remote role assignment for FBN .
I am using the portal version EP 7.0.
Can anybody help me .
Thanks & Regards,
Amit Kade

Hi, Amit
u have to assign the one iview in User-Admin role
Goto->Contentadmin-> portal content->content provded by sap->Admin interface->iview template ->select proxy to remote role iview.
and this iview assign to user admin role the u can able to see.
if its solve please give me 10 points
thanks & regards
chitta

While creating project from inactive dc not able to view the project struct

Dear All,
I have created project from inactive dc now when I open the project in the webdynpro explorer I am not able to view the application, component and models. I have tried reloading and repairing but still the structure is not appearing. Can anyone tell what I may be doing wrong.
Thankyou
Regards,
Ganesh

Dear Bala,
I have got about 8 to 10 DC's out of which only this one is showing the missing structure and as this dc is being used by other dc's I am getting the error like missing component. Previously we were using the client desktop and doin the work now we have shifted it to our individual systems. Now any project I am creating whether from same track or different same problem comming the structure is missing.
Regards,
Ganesh
Edited by: Ganesh Sawant on Sep 8, 2009 9:42 AM

Not able to view the fields ....made through enhancement 0002--

Dear Freinds,
            I have made enhancment for infotype's 0002 and 0023 . However when i am looking through PA30 for a personnel number iam not able to view the fields created in 0002 infotype , however iam able to view the fields created in infotype 0023 . Is there is a any setting's i have to make so that i can view these fields created in infotype 0002 also ??
please let me know .
regards
vamsi.

Dear Deepak
            yes this is enhancement to 0002 and 0023 ... i have to add one field for the
0002 ..........as ihave to add chinese name for my requirement ..................
and i have done some new fields for 0023. if can give me your personnel id i can
send the screen shots ........
i want to tell one thing.........   i have created for 0002 by adding new the new field (chinese name) .. it created a z program.ZP000200(Module pool) with the below
includes
INCLUDE ZP000210.
INCLUDE MPPDAT00.
INCLUDE FP50PPSB.
INCLUDE MPPERS00.
INCLUDE ZP000220.
INCLUDE ZP000230.
INCLUDE ZP000240.
and when i went to the screen 0200 i have found the field which i have added
P0002-ZZCHNAM type char 20 . and i executed from here itself (by clicking F8).
and iam able to see the field which i have added
under additional fields...........but the same if i go in PA30 and create .........for an employee (molga = 27)... i dont find the field which i created...... i have done this
change for the country 27 only.
regards
vamsi
regards

Not able to view the usage tracking dashboard in production

Hi ,
I tried to incorporate the usage tracking of the dashboard in my development which is working fine ,but the same when i moved to production .I was not able to view the usage tracking dashboard itself .
Can someone pls help me out to solve the issue.
Thanks in advance.

Do you mean the actual dashboard is missing or can you not see data in it?

IDOC posted to PI server - not able to view the posted idoc

Similar Messages

Maybe you are looking for