IDoc Prartner number/ Func. Module interface is incorrect

Hello,
As i used WE31, WE30, WE81, WE82, BD51, WE42, WE20 for my customized INBOUND idoc. I distribute the model, while i am testing IDoc (WE19) its throwing a error saying that "Partner profile not maintained' and "Idoc for Function Z_IDOC_INPUT_EMPMAST is incorrect". Could you let me know what would be the reason..? even i kept breakpoint in Function Module and executing using Inbound function module its not triggering my customized FM. Please let me know ASAP if have idea on this error..
Thanks in advance..
regards

let me tell you how to stop at your break point in FM.
while executing the we19. press /h
then it will go to debugging mode.
there in debugger in setting press update debugging.
this will switch on the update debugging. now press F8.
then it will open another window for update debugging.
your function module will be called here. now press F8 it will definetly stop at your break point.
now coming to your errors. the partner profile doesn't exist is a common one. don't worry about that.
now coming to second error check whether you assigned process code in the we20 and check the structure of idoc in debugging. it will give some idea to you.

Similar Messages

To find the processing Func. module

hi,
can anyone tell me how to find the processing Func. module(outbound) if i know the message type, basic type and extension.
i tried with we57 but coudnt find the one(outbound) needed.

Hi Pawan,
From the link
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi.jhtml
For more inf. you can check this link.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
*Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Hope you will clear now, if yes please close this thread with rewarding appropriate points to the helpful answers.
Cheers
Sunny

Func modules vs. BAPIs; What is a BADI? When do we use it?

Hi experts,
I have some ABAP questions and need your help to answer them.
1. What is the difference between a func. module and a BAPI?
2. What is a BADI and in which circumtanse we use it? How can I view a BADI example?
3. What is a WorkFlow and in which circumtanse we use it? How can I view an WorkFlow example?
Many many thanks,
Ron

1.
All BAPIs are function modules, but they have been enhanced by using object oriented design. BAPIs are designed based around Business objects (in the business object repository SWO1/SWO2). They are created to fill a business need and are a good way of exposing SAP functionality to third party systems. They can be viewed through transaction BAPI. BAPIs are also generally all RFC enabled, whereas not all function modules are.
Function modules are developed to perform a particular function, some of which is very specific to the program which calls it. A lot of the standard SAP function modules are only really meant to be used by SAP, hence the complete lack of documentation or intuitiveness.
check this link too.
Re: Diff. Between BAPI and RFC
2.
Difference Between BADI and User Exits
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
SE18 - BADI definition
SE19 - BADI implementation
3. check the page for workflow links
http://www.sapgenie.com/phpLinks/index.php?PHPSESSID=45016ad4a8b3e6005f53a04a83b79782&PID=62&PHPSESSID=45016ad4a8b3e6005f53a04a83b79782
Thanks,

To get the values from func. module

c i have used a func. module to calculate the values of date , i wrote a subroutine i want the values of this to be dispalyed on the list...
now how do i get them to the list output, i mean how do i assign to the fieldcatalog?????
thanks,
CAPC

Hi CAPC,
Plese find below a sample program which will solve u r broblem.
report abc.
TYPE-POOLS : slis.
Data
DATA : BEGIN OF itab OCCURS 0.
INCLUDE STRUCTURE t001.
DATA : flag tyPE c,
END OF itab.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : alvly TYPE slis_layout_alv.
Select Data
SELECT * FROM t001 INTO TABLE itab.
*------- Field Catalogue
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'ITAB'
i_inclname = sy-repid
CHANGING
ct_fieldcat = alvfc
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
Display
alvly-box_fieldname = 'FLAG'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = alvfc
i_callback_program = sy-repid "<-------Important
i_callback_user_command = 'ITAB_USER_COMMAND' "<------ Important
is_layout = alvly
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
CALL BACK FORM
FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
slis_selfield.
data : msg(100) type c.
LOOP AT itab.
if itab-flag = 'X'.
msg = sy-tabix.
condense msg.
concatenate 'Row Number ' msg ' ' into msg
separated by space.
message msg type 'I'.
endif.
ENDLOOP.
ENDFORM. "ITAB_user_command
Regards,
Sunil

Comp characteristics extraction - Func Modules

All,
There are 2 function modules to get characteristics info:
1. CUAB_DISPLAY_CD_CONFIGURATION
2. CUD0_GET_VAL_FROM_INSTANCE
Both work off the CUOBJ value that is derived either from the RESB table for the Prod Order (component config information extraction) or from the Purchase Order table EKPO.
Question is what is the diff b/w the 2 function modules in terms of the output they generate.
My interest is to find a function module that will extract all the component characteristics (chars of class 300)
Pls let me know
Thanks

Thanks,
Then there are these 2 func modules, how do these differ from the earlier ones?:
VC_I_GET_CONFIGURATION_IBASE
CLAF_CLASSIFICATION_OF_OBJECTS
I'm trying to be sure I use the right one that does not give me incorrect data. I'm plng to extract data for the char's & pass them to my MES system for further use.
Thanks

What is the Successfull processed IDOC status number?

Hi Experts
What is the Successfull processed IDOC status number?
arjent Please.
Thanks in advance
Sekhar

Hi Chandra,
Below are IDoc Process Codes
For outboud Idocs:
1 IDoc created
2 Error passing data to port
3 Data passed to port OK
4 Error within control information of EDI subsystem
5 Error during translation
6 Translation OK
7 Error during syntax check
8 Syntax check OK
9 Error during interchange handling
10 Interchange handling OK
11 Error during dispatch
12 Dispatch OK
13 Retransmission OK
14 Interchange Acknowledgement positive
15 Interchange Acknowledgement negative
16 Functional Acknowledgement positive
17 Functional Acknowledgement negative
18 Triggering EDI subsystem OK
19 Data transfer for test OK
20 Error triggering EDI subsystem
21 Error passing data for test
22 Dispatch OK, acknowledgement still due
23 Error during retransmission
24 Control information of EDI subsystem OK
25 Processing despite syntax error (outbound)
26 Error during syntax check of IDoc (outbound)
27 Error in dispatch level (ALE service)
28 Not used
29 Error in ALE service
30 IDoc ready for dispatch (ALE service)
31 Error - no further processing
32 IDoc was edited
33 Original of an IDoc which was edited
34 Error in control record of IDoc
35 IDoc reloaded from archive
36 Electronic signature not performed (timeout)
37 IDoc added incorrectly
38 IDoc archived
39 IDoc is in the receiving system (ALE service)
40 Application document not created in receiving system
41 Application document created in receiving system
42 IDoc was created by test transaction
50 IDoc added
For Inound Idocs
51 Error: Application document not posted
52 Application document not fully posted
53 Application document posted
54 Error during formal application check
55 Formal application check OK
56 IDoc with errors added
57 Test IDoc: Error during application check
58 IDoc-Copy from an R/2 connection
59 Not used
60 Error during syntax check of IDoc (inbound)
61 Processing despite syntax error (inbound)
62 IDoc passed to application
63 Error passing IDoc to application
64 IDoc ready to be transferred to application
65 Error in ALE service
66 IDoc is waiting for predecessor IDoc (serialization)
67 Not used
68 Error - no further processing
69 IDoc was edited
70 Original of an IDoc which was edited
71 IDoc reloaded from archive
72 Not used, only R/2
73 IDoc archived
74 IDoc was created by test transaction
Regards,
Satish

Idocs Used in SD module

Friends,
SAP has to receive the following data from Oracle Financials. XI is the interface. So I need to identify the idocs used in SD module.
Can any one help me what idoc / bapi should i use for the below inbound processes.
Customer Credit Limit
Customer credit/debit note - Shall I use INVOIC02 Idoc for this purpose?
Customer Payments
Rebate settlements
Any input is highly thanked
Regards
Raj

Hi there,
Pls go to WE20 --> Logical systems. Select any logical systems that are setup in your company. Press F4 in the inbound parameters. You will see what are the message types that are available by standard & customized.
Select the required 1.
Regards,
Sivanand

BAPI or Function Module interface from XSD definition

Given an XSD file, is there any way to automatically generate a BAPI or Function Module interface from it?
BR,
Tony.

Hi,
There are two approaches to create interfaces in XI
- Outside-In - interfaces definitions are stored in XI as e.g. xsd and PROXY classes/interfaces are generated in business system
- Inside-Out - interfaces are developed in business system and imported into XI e.g. IDocs, BAPIs, RFMs
So it is NOT possible to generate BAPI or FM based on XSD definition, but you can generate proxy.
Regards,
Jakub

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an email with the serial number once the product was registered - But I never received this email. If anyone is able to help me with this issue - that would be great. the registration number is: PEPEP6-5578-6450-8871-9107 I am using a windows based system

If I were you I would first make sure CS6 was deactivated or signed-out. Then download Adobe's cleaner and remove cc, CS6 and any other creative application installed including Creative Cloud desktop application. Then install CS6 and use your CS6 serial number during the install to activate CS6 standard or extended which ever the serial number is for. CS6 Version 13.0 should the be activated. That level of CS6 is extremely bug ridden so be sure to the use CS6 menu Help>Updates to get CS6 updates. Windows should update to version 13.0.1.3 Mac to version 13.0.6. Not Subscription CS6 version 13.1.2...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Func module to convert list to pdf without using memory id

hi Experts,
Is there any funct module to convert list to pdf without using memory, as I am using Convert_to_PDF func module which outputs last page only when its running in Background.
But my req is to output all the Pages in the PDF format.
Sample code also appreciable,
Reward Points are guranteed..
Cheers
Santosh

Check the below postings :
Re: Convert spool to pdf
Convert a spooljob to a writeprotected PDF
Hope this will helpful

Need Tables and Func Modules related to Project Systems

Hi
      I am working on a custom program that Creates Project ( CJ01) using standard Project Def.
     All WBS elements of Standard Project Template should be copied to the newly created Project
    I am not able to get any Standard Func Module which creates new WBS elements from Standard WBS elements.
It will be of great help for me, if any one has info on this.
thanks in advance.

Hi
See the Tables
PRPS -WBS element
PROJ - Project Definition
other tables are
PRTE,PRTX,PSTX,PSTT -Scheduling data for items
PRHIS
see the fun modules
CJPN_GET_WBS_ELEMENT
CJPS_GET_WBS_ELEMENT
PSBW_GET_TEXT_WBS_ELEMENT
PSBW_GET_WBS_ELEMENT
K_PROJECT_WBS_PLANVALUES
AIPR_GET_HIERARCHY_TO_WBSELEM
CJDW_GET_NEW_WBS_ELEMENTS
Reward points if useful
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

Scope of Func module???

Hi guys
Customer using Func group ZXXXXX, and using BDCRECXY include inside funcgroup
to access for Func modules.
In func module Z_XXXX_PLAN, PERFORM BDC_TRANSACTION statement is
called and "Call transaction CJ30" is used under Subroutine "BDC_TRANSACTION"
inside the BDCRECXY
How to make sure that This Func module is calling include BDCRECXY using BDC_TRANSACTION Subroutine.
In the where used list for BDCRECXY program,it listed only 2 other programs(Func module) LZPS00010U14 and LF040TOP.
How to make believe that BDC_TRANSACTION is calling BDCRECXY include?
Regards
jaichan

Hi Sreenivas,
Thanks for your reply.
Anyother way do we have to findout without working on editor?
Because I dont have Test data as well as System in front of me.
regards
Jaichan

Func. module

have u created any func. module, if yes then what is the purpose

And what was it's purpose?
You'll never get full points if you don't answer the whole question

How to flag a func. module in Func. Library as executable in Update Task?

How to flag a func. module in Func. Library as executable in Update Task? I am getting a program termination error. The foollowing is the error analysis.
Error analysis
The function module "ZHEM" was called with the addition "... IN UPDATE TASK".
However, it is not flagged in the Function Library as executable in the update task.

Hi!
Go to SE37, tab attributes, area processing type, choose radio button update module and desired type (V1, V1 no restart, V2, V3).
Regards,
Christian

Company was not supplied in Function module interface

Hi all,
When i tries to access the following tcode - me52n,me53n i got following erro message "Company was not supplied in Function module interface" ,
Thanks

Hi Navdeep,
Maintain company code in your user profile with the parameter id BUK.
like in you user profile, on parameter id tab give the parameter id name BUk and value '0001' (the company code against purchase requistion had been created)
Hope it will solve your problem.
Regards
Krish

IDoc Prartner number/ Func. Module interface is incorrect

Similar Messages

Maybe you are looking for