IDOC prob

Hi All,
i have created IDOC in client 800 and send using TC BD10.
In 810 client i have received usthe material using  BD11
when I checked in we05:
The status is in RED color and In the Status Record it says Application Document not posted.
Could you please tell me where i am wrong?
Thanks,
ss

Hi,
I will Send you the Document  with screen print the  whole  configuration  process. i hope that will help you to resolve it
I am reachable at- [email protected]
Regards
Agasthuri Doss

Similar Messages

  • Prob in extended idoc - ORDER05

    Hi,
    I have extended basic type orders05. when i run the FM, EXIT_SAPLVEDC_003, inside where i have written code for populating the z segments, i am unable to see the segments at all.
    i mean, i can NOT see edidd-segnam EQ extended segment names. i have created a project in Cmod and its active as well.
    Please help me out.
    Edited by: Aafaque Husain on Dec 21, 2007 10:29 AM

    Thanks Martin,
    I am able to see the extended idoc segments now as per logic told by you,  but now when i m testing the idoc and checking the result in we02, i m getting an error which reads as follows,
    EDI: Syntax error in IDoc (segment cannot be identified)
    Message no. E0078
    Diagnosis
    The segment ZST_STORMS does not occur at the current level of the basic type ORDERS05 (extension ZORDER05).
    This error can have several reasons:
    The segment ZST_STORMS is assigned to a group whose header segment does not occur.
    The segment ZST_STORMS does not exist in the syntax description of the basic type ORDERS05 (extension ZORDER05).
    The sequence of segments in the group in which the segment appears is incorrect.
    Previous errors ('mandatory' segment or group missing) may be due to this error.
    Procedure
    Please check the IDoc or the syntax description of the basic type ORDERS05 (extension ZORDER05).
    please can u help me out in this.
    Thanks for ur help extended.

  • IDOC configuration Issue

    HI All,
    I am getting the following error Unable to Convert Integration Process into ALE Logical System... Even though i defined LS in Business Landscape and also In Adapter Specifiers of Business System...
    I have gone through all the weblogs and threads in the forums related to this topic, but still I am confused with the steps to followed.
    I am workinng on a BPM Scenario where from Legacy system, I will be sending Order Details to XI and From XI (BPM) to R/3 through IDOC adapter...
    So Say XISERVER is the Client 600
    And SAP R/3 is         Client 800
    Please Can u tell me the steps to be followed i.e ,
    In which sys .to define Logical Systems, RFC and where to create Port..
    Actually i created a Logical System in Client 800 (IDS800) and also the same in Client 600
    Now please can any one provide me steps to be followed in detail....
    Points will be rewarded......
    Regards,
    Sridhar

    Hi Micheal,
    I have already done header mapping as mentioned by you. Our total scenario is as follows:
    We have a outbound-asynchronous interface, an abstract-asynchronous interface mapped to the IDOC ORDERS01. Our integration process has a simple recieve and send step. In the configuration part we have done Reciever Determination for file system to BPM and from BPM to R/3.
    we also imported Integration process from IR and here we have the same Abstract interface as sender and receiver .. Is this any prob..?
    After that we have followed all the steps given in the How to Document on IDOC adapter congfiguration. We have searched through lot of posts in form and tried all the suggestions.
    Pls help us by giving some sequence of steps or snap shots to my mail ID ([email protected])...
    Thanks and regards,
    Sridhar reddy
    Message was edited by: sridhar reddy kondam

  • Message Split -- File to Idoc Scenario  -  ( Without BPM )

    I have multiple records coming to XI in a File and I have to create Multiple Idocs to R/3.
    Due to Complexity of mapping I'm splitting Maaping step into 2 message Mappings.
    A-->B
    B-->C
    In the 2nd Mapping step  I'm doing message Split meaning for each Source record I'm creating multiple Idocs ( To be precise each record on the source becomes 4 idocs in the Target.
    2nd Mapping step is as follows
    Source 1..1
      Sourcerecord 0.. Unbounded
        field1  0..1
        field2  0..1
        filed3  0..1
    Target
    Message 1
        Idoc   1.. Unbounded
          Idoc Structure..
    Message 2
          Idoc   1.. Unbounded
    Message 3
          Idoc   1.. Unbounded
    Message 4
          Idoc   1.. Unbounded
    So based on some criteria each record of Source will be mapped to 4 Messages (  1 each under each Message )
    Is it possible to do this without BPM?. Iam sending all these Idocs to same R/3 System.
    Thanks for any help..RK

    Hi,
    See the blog
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    <i>Basicly we have 2 ways of handling such scenarios:
    - we can use a block step and send multiple IDOCs from our BPM
    - we can also do a little trick and send multiple IDOCs from the XI without a BPM
    The first approach is a standard XI approach. It involves the use of a BPM
    so the speed of this transfer many not be very good in case you'd like to send
    hundreds or thousands of IDOCs in just one call.
    The second approach uses a little trick that was mentioned several times
    on the XI Froum by a number of XI developers but is still not very clear to the XI newbies.
    It allows us to send multiple IDOCs without the use of a BPM. Most probably this will be your choice
    if you'd like to use such 1:N (IDOCs) scenarios effectively.</i>
    Please see the bwlow threads also..
    IDOC Splitting
    File To IDOC Thru XI
    Multi-Mappings in BPM (XI 3.0)
    Please let me know , your prob..is solcev or not..
    Regards
    Chilla..

  • No service for system ..PI, client. in Integration Directory -IDOC

    Hi,
    I am getting following error when try to post IDoc frm SAP to SAP XI:
    No service for system ..PI, client. in Integration Directory -IDOC
    I have verified the following transactions:
    port,RFC destinations are correct in SAP and XI systems(verfied in SM59,IDX1,BD64 and in SLD)
    Please help me here

    This error was resoved now.
    What is the cause?
    In ID, Adapter spefic Identifiers for SAP Business System does not have R/3 System ID and Client and It has only Logical System name. Its bcoz of cache prob between XI and SLD.
    Resolution:
    There is an option to refresh, so that Adapter specific identifiers was refreshed from SLD and values got populated for R/3 System ID and Client name.
    Generally when Business System is imported from SLD to XI, these 3 parameters(Logical System name,R/3 System ID and Client) will populate automatically.
    Thanks for Inputs:)

  • IDOC --BPM--IDOC AND FILE

    Hi Experts,
    My scenario is idoc to idoc and file through BPM.
    so I hve one integration process and 2 receiver.The prob is frm IP it is pointing to only file not to IDOC
    1) 1 sender agreement
    2) 3 receiver determination
    3) 3 interface determination
    please help me out..

    Why are you using BPM for this?it is not good design.
    If you want to still use bpm then
    1)1 receive step,
    2)2 transformations steps(if or are executing Operation mapping in IP).
    3)2 send steps.
    check your BPM design and monitor Integration process work flow.
    Regards,
    Raj

  • File to Idoc Scenaio.

    Hii..
    I am trying file to Idoc scenario in pi7.1.i designed and finished the work in integration builder.My prob is i cant able to find
    my sender communication channel in my Runtime workbench and when iam clicking the sender communication channel in
    Integration builder iam geeting the following error as pop up
    Adapter Engine not found "Unable to find associated SLD element for specified class (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.sappi7, string], target element class: SAP_BusinessSystem)"
    Help me to sort out this prob..
    With Regards..
    Dinesh

    hi dinesh,
    there are similar problem posted in [forum|http://www.sdn.sap.com/irj/scn/advancedsearch?query=unabletofindassociatedSLDelementforspecifiedclass] . Please check if there is any issue with the user id  is locked or expired
    Please check the sap note 1117249 and also check if the password for the ID that PI uses to communicate with the SLD  is expired ?
    Regards,
    Srinivas

  • IDOC posting in same client

    Hi ,
    This is laxman,
    My requirement is , when the customer create sales order i want create one more sales order with some changes in same client.
    i am using the inbound and outbound idoc with orders message type and process code sd10 for outbound idoc , and i have created new process code for inbound .
    and i have created logical sys for client 030 and one more dummy logical sys with ports .then generating the partner profile everything ok.
    i am trying to distribute model view while i got error ,model view has not been modified reason is distribution model currently being processed.
    Outbound IDoc was created and inbound IDoc was created with status 56(IDoc added with errors ).
    means my function module is not triggered.
    How can i solve this prob.
    have any alternative code for this object.
    please help me.
    Thanks & Regards
    laxman

    Hi Laxman,
    For sales orders, I would not use the ALE distribution model.  Just create the inbound and outbound partners directly (as per an EDI situation).
    You say that the partner profile is generated ok, but there must be a problem on the inbound partner if you are getting a 56 error.
    Check out the inbound processing for your inbound partner (and check your idoc control record to make sure that the partner number in the idoc corresponds to the partner you have configured).
    If you still have problems, please post some more specifics.
    Cheers,
    Brad
    Cheers,
    Brad

  • Creatin  and posting idocs in same client

    Hi ,
    This is laxman,
    My requirement is , when the customer create sales order i want create one more sales order with some changes in same client.
    i am using the inbound and outbound idoc with orders message type and process code sd10 for outbound idoc , and i have created new process code for inbound .
    and i have created logical sys for client 030 and one more dummy logical sys with ports .then generating the partner profile everything ok.
    i am trying to distribute model view while i got error ,model view has not been modified reason is distribution model currently being processed.
    Outbound IDoc was created and inbound IDoc was created with status 56(IDoc added with errors ).
    means my function module is not triggered.
    How can i solve this prob.
    have any alternative code for this object.
    please help me.
    Thanks & Regards
    laxman

    laxman,
    i would highly advise you to post this message over at the ABAP forums, located here:
    ABAP Development
    if, by chance, a moderator sees this, i guess they can do the necessary transfer too. =)
    ryan.

  • Query in IDOC.................Urgent

    Hi Friends,
    Sometime back i had post a query for the same in BAPI,i got the BAPI,but i feel if i ll get the respective IDOC for the same than i ll me more close to solve my prob.
    so send me an IDOC for Planned Investment and Expenditure.
    Plz help me on this.
    Thanks a lot in Advance
    mrutyun^

    hi Mrutyunjaya,
    try using BAPI_FIXEDASSET_CREATE1.
    You will get lot of information about asset in business object ‘BUS1022’.
    regards,

  • Inbound  idoc handling

    How can we handle the inbound idoc, for the status 51 and 52, plz help me rewards will be there

    Go to BD87 and execute the IDoc again.
    51     Application document not posted
    52     Application document not fully posted
    In case of these errors the reason may be wrong data or locking problem.
    In case of locking prob, if you execute them again then the IDoc will post.
    in case of erroneous data.. you have to change data and post again.... You can check that through BD87 in debugging mode...

  • 1 matser idoc  generated but 0 communication  idoc .

    hai all.
    am practising ale-idoc.and sending material with message type MATMAS.
    i done rfc connections . b/w 800 n 810. i got it .
    but my prob is
    1 master idoc generated for message type MATMAS.
    but 0 communication records generated for msg.type MATMAS.
    idoc is not generated
    how can i rectify this erorr.
    pls do helpful.
    tanx in advacne .
    Satya.

    Hi Satya,
    The ALE distribution model defines which applications in your distributed systems communicate with each other and which types of data are distributed. You require a separate ALE distribution model for a Central User Administration (CUA).
    In the central system, you define the structure of your Central User Administration in the model view, which you then distribute to the child systems.
    Two types of data are distributed in the ALE distribution model of the CUA to be defined:
    · User master data (including assigned roles and profiles)
    ·Company addresses
    You require two methods in the distribution model to distribute user data and company addresses. These methods are realized using BAPIs of the business objects USER and UserCompany with the method clone.
    You can check the following links for details.
    http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a610f507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/2a610f507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/44/1a243754192009e10000009b38f839/frameset.htm
    Give points if the answers are helpful.
    Regards,
    Biswa.

  • Logical System in IDOC-XI scenario

    Hi,
         I need help to understand few things in IDOC-XI scenario, could any one help me in this regard.
        we use Adapter specific identifiers to map services, we have following type of identifiers 1) Sys.ID & Client No.  2) Logical System. 
    my questions are
    a) Are we use Logical System in B to B scenario ?
    b) Are we use LS in reference to the SAP system or Non SAP system ? if a non SAP system....how a non SAP system send an IDOC and why a non SAP system receive an IDOC ( conversion is possible in XI ) ?
    Thanks and Regards
    Mahesh.

    Hay Kumar,
    Logical systems can also be used for SAp sytems wich are not installed yet as a virtuall placeholder.
    a) yes. if on of your business is a non sap system or a propritery system that you developed yuo'll ue LS.
    b) non SAP system can send and recieve IDOCs. so it's possiable to get an IDOC from a system and turn it into an RFC for SAP or get an IDOC from an SAP system and then turn it into something else for another system.
    Have a Good One,
    Uri Lifshitz.

  • IDoc not received in MII

    Hi All, 
    I am using SAP MII 12.1.5 Build 87. 
    I am facing problem with iDoc Listner we have configured iDoc Listner properly in SAP ERP, SAP NW and in SAP MII. 
    We are able to send iDoc from SAP but we are not able to receive same in MII. 
    Port and iDoc Server is giving status connected previously it was working fine in SAP MII 12.1.5 Build 83. 
    Following are the log details for SAP MII Logger as well as SAP NW Log. 
    SAP NW Log: 
    Error processing JRA IDOC message  
    SAP MII Log: 
    Error processing JRA IDOC message  
    Error processing JRA IDOC message [server=xxx, client=xxx]  
    [EXCEPTION]
    java.lang.NullPointerException
    at com.sap.xmii.ejb.JRAListenerBean.onMessage(JRAListenerBean.java:130)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MessageListenerType.invoke(Interceptors_MessageListenerType.java:110)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Lock.invoke(Interceptors_Lock.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    at com.sap.engine.services.ejb3.runtime.impl.MDBProxyInvocationHandler.invoke(MDBProxyInvocationHandler.java:77)
    at $Proxy943.onMessage(Unknown Source)
    at com.sap.mw.jco.jra.idoc.JRAIDocExtension$IDocMessageHandler.onMessage(JRAIDocExtension.java:72)
    at com.sap.mw.jco.jra.JRA$ReaderThread.sendDirectToMdb(JRA.java:6641)
    at com.sap.mw.jco.jra.JRA$ReaderThread.sendAsynchRequest(JRA.java:6601)
    at com.sap.mw.jco.jra.JRA$ReaderThread.handleRequest(JRA.java:6771)
    at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:989)
    at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:967)
    at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:142)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:2927)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2659)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2478)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2362)
    at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2207)
    at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:259)
    at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:322)
    at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:220)
    at com.sap.mw.jco.jra.JRA$ReaderThread.run(JRA.java:7260)
    at com.sap.engine.services.connector.jca15.work.TaskImpl.run(TaskImpl.java:255)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
    at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    Please help me out on this issue.                                         
    Regards,
    Manoj Bilthare
    Edited by: Manoj Bilthare on May 19, 2010 12:57 PM

    Hi Manoj,
    Once you have configured your Listener have you checked pressing the update button and i dont want to ask you which version of NW SP you have installed as you said it was working for you with Build 83, but nevertheless NW SP Level should not be not less than SP3.
    If this doesn't help you,please try  restarting your server again.
    How about the credential editor have you configured this as well?
    Regards,
    Sudhir Kumar
    Edited by: Sudhir Kumar Shambana on May 19, 2010 10:46 AM

  • My apps dance open and close on their own in my IPad 2 what can be the prob? I have already restored

    I got the charger flex or pin changed and now the apps dance on the screen, photos open and zoom in, then out, the other apps open and close. I have already restored the device with Itunes and prob is still there. What can be the problem? Any suggestion will be welcome. Thank you

    THANKS for your prompt reply  Bluetooth is off in my laptop and IPhone.. and in fact the reset is the only thing that can make it back to normal. But for a lil while. I wonder if it is the touch, or the home botton... both things are very expensive to replace, so I wouldn't like to spend $$ and continue having the prob.....

Maybe you are looking for