Idoc process manually( source system authorization not there)

Hi friends,
I have a chain which got failed and i went to process monitor and there in the status tab i got  a message as  process manually and i did not have source system authorization . How to correct this type  of problem from Bw side and points awarded.
Regards,
pavan

Hi Pavan
1) first check is the issue with the OLTP idoc or BW odoc..
2) in status tab ur seeing the Process manually at the bottom in Blu color if that is the case click on that .. it means the data has come til PSA and it dint loaded to ddatatarget
3) Ask anybdy who has the access to R3 and process the Idoc manullly fromt he BD87
hope it helps
regards
CK

Similar Messages

  • Transporting Process Chain - error  Source system does not exist

    Hi,
    I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
    However, I got the following transport error: Source system does not exist
    =======
    Diagnosis
    Source system  is not known.
    System Response
    The imported data for DataSource  was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
    Procedure
    Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
    You get to maintenance using Tools -> Conversion of the logical system names.
    ============
    I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
    And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
    FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
    Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
    Thanks

    Hi,
    This error is due to the fact that the
    mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
    You need to maintain table RSLOGSYSMAP in each system
    You can find the steps to do it in the attached note 127326:
    o  Maintain table 'RSLOGSYSMAP' in the target BW with view
       'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
       This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
    This source system reference in turn is absolutely necessary to activate the transfer structure.
       Example:
       Source BW with source system AAA.
       Target BW with source system BBB where the source system AAA
       corresponds to the source system BBB.
       Entry in RSLOGSYSMAP in the target BW:
       Original source system: AAA, target source system: BBB.
       Give the DDIC user in the source BW in client 000 the
       authorization profile S_RS_ALL to create BW objects.
    Cheers
    Rajesh

  • RSAR2318 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Error RSAR238 : IDoc type for source system T90CLNT090 is not available
    I have already checked trx & dtps, but could not find resolution.
    Kindly help me with this error.
    Thanks and regards,
    MS

    M Sharma wrote:
    But how exactly can I create when T90CLNT is not active? Help please.
    Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

  • RSAR238 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Kindly help me with this error.
    Thanks and regards,
    Dhanapal

    Hi,
    Check the same in SDN..
    Object ZDUMMY could not be activatedMessage no. R7I028
    Re: DSO Activation problem
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
    Thanks
    Reddy

  • R3 to BW Extraction fails: Non-updated Idocs found in Source System

    We load data from R3 to BW and this process has been successful for the past few days except last night.  The error msg is listed below in between two dashed lines:
    Non-updated Idocs found in Source System
    Diagnosis
    IDocs were found in the ALE inbox for Source System that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
    I checked the system connection by right click the source system in the Source System page on BW and selecting "Check" and "Customizing for Extractors" from the context menu and find everything works fine.  
    Any idea about the IDOC thing?
    Thanks

    hi Subray/Bhanu,
    With WE05, find some records with yellow status.  How to find some missing data here?
    With BD87, under BW system folder, there are two folders:
    1. IDocs in outbound processing
    2. IDoc in inbound processing
    Under 1st folder, there is one yellow status folder called "IDoc ready for dispatch (ALE service)", continue to expand another folder called CREMAS under it, there is a blue information line which is "Receiver found , Data filtered , No conversion , No version change".
    Under 2nd folder, there is one yellow status folder called "IDoc ready to be transferred to application", continue to expand other two folder under it called "BBPIV" and "RSRQST", find there is a red flash status line which is "No resources, immed. processing not possible: Too few free dialog work" under these two folders.
    I need to go ahead to select these two red flash status lines and then press the Process button at the top bar?
    Thanks
    Message was edited by: Kevin Smith

  • IDOCS Process Manually

    Hi
    Extraction is getting terminated  with red status (0 for 0 records). The message in the status tab is:
    Non-updated Idocs found in Source System
    Diagnosis
    IDocs were found in the ALE inbox for Source System that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
    There is a Button "Process manually". After i clicked on that button, i got a msg <b>"Incorrect data packets are now updated again."</b>. After this i could not see any action.
    How to go about solving this problem. When do we face this kind of problem and wats the reason?
    Help is reallly appreciated.
    Regards
    Rak

    Hi
    my status is 23409 from 23409 records and in red status.
    In status
    Non-updated Idocs found in Business Information Warehouse
    Diagnosis
    IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
    MEthod 1
    Then Environment>ALE management>In datawarehousing.
    Then given the IDOC number and executed. The next screen appeared is idoc list where 64 status is in yellow color. But there is no option to process or execute that idoc.
    Method 2.
    BD87 in BW..Given the IDOC number and executed..There is a node "IDoc entries in tRFC queue. But when i select that and click on process, a error msg is being displayed "the operation cannot be carried with this node type".
    What should do it to process.
    REgards
    Rak

  • Non-updated Idocs found in Source System

    Hi Experts,
    I am getting an error Non-updated Idocs found in Source System
    Plz help me to resolve this issue.

    Hi
    BD87 Update Idocs manually.
    1. When you look in the Monitor screen for the first time on a day you mostly will see some Loads that have yellow traffic lights. When you click on the lowest line of the Load (with the time of Load start) you will get the next popup screen:
    2. Here you can click on the "Yes" button. The Load specification window (right side of the screen) will now be filled with data.
    3. You can now start the manual processing of the IDocs. You go to the "Details" tabpage of the right window. You right click on the line with the red traffic light stating "Request IDoc : IDoc ready to be transferred to application" on the "Details" tab page of the Load. In the option menu that appears choose the option "Update manually in OLTP" (click it).
    4. You will get to the next screen (which is in fact a transaction in the source system (SAP R/3) where you can update the IDoc that is send by the source system)
    5. Now click the "Excecute" button on the left of the screen (or press the F8 button on your keyboard). You will get to the next screen:
    6. This states that the IDoc has been passed through to BW. You return to BW by clicking the "Back" button (or pressing the F3 button on your keyboard) twice. After the first time you will see the previous screen and after that the Monitor screen again.
    7. You will now see that the Status of the Load has turned to yellow or green. When it is yellow you will have to wait a little time (the execution of the Load in BW is still running) and by clicking "Refresh Details" button on the left upper side of the screen (or pressing the F8 button on your keyboard) you will see the Load turn green.
    Hope it helps

  • Message "Creation of DataSources for SAP source system is not permitted"

    Hi,
    I am in DW Workbench: Modeling and I need to copy a DataSource.
    It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
    What can I do?
    Thks

    Hii.
    You can not copy the standard datasource to any other source system it will not allow you to do that.
    But if you want to copy you can copy it to PC FILE source system.
    It will allow you to copy there.
    Right click in Datasource->Copy-> Give Target datasource name -
    > intarget Source system tab -
    >Give Source system for File.
    Thanks
    Mayank
    Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

  • Multiple usage of Source System is not possible with installed DMIS version on source

    Hello folks!
    I`ve got a problem trying to adjust the Data Replication to SAP BW (on HANA) using SAP LT Replication Server.
    I`ve deleted one connection and after that I`m trying to create new one through  Configuration & Monitoring Dashboard (transaction LTR) with the same source / target systems.
    As result when on the second step (Specify Source System) I specify RFC destination of the source system it appears an error with text
    "Multiple usage of Source System is not possible with installed DMIS version on source".
    But there`s no any adjusted connection in system now..
    Please, help me to understand  how to fix that problem, I can`t find a solution

    Hi,
    When you say that you 'deleted one connection', did you delete the RFC connection or the SLT Configuration? If it is not a real multiple usage scenario, then deactivate the 'allow multiple usage' flag, else install the correct DMIS version on both SLT and source.
    Thanks
    kris

  • Source system restore - Source system does not exist

    Hello friends,
    We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
    We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
    Now, when i check RSA1 source system Check for QA1, i get this error :
    Port 'A000000103 ' of type 'ALE ' does not exist
    No destination exists to source system QA1
    I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
    Please suggest.
    I do not have to lose transfer rules/PSA tables..etc.
    thanks
    ashish

    I get this when i try to restor connection :
    Source system does not exist
    Message no. RSAR175
    Diagnosis
    You have specified that you want to restore source system QA2. This source system is not known in BI.
    System Response
    The source system is not restored.
    Procedure
    Recreate the source system.
    If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

  • Idoc failed in Bi system "Could not find code page for receiving system".

    Dear Experts,
    i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
    All the idocs have been successfully posted except one which is giving this error
    Idoc status 02 - could not find code page for receiver system.
    Please guide me
    thanks
    vamsi

    Hello Vamsi,
    check Note 647495 - RFC for Unicode ./. non-Unicode Connections
    If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
    Please check this thread - IDoc error - Could not find code page for receiving system
    Hope it helps,
    Thanks & Regards,
    Amit Barnawal

  • Transport Request got failed due to Source system does not Exist

    Dear All,
    I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
    After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
    But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
    why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
    Thanks,
    Ven

    Dear Venkat ,
    Go to Quality system .
    Use RSA1 Transaction --> go to Tools --> Manage Source System :
    Here you can map the entry  of system ..
    Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you  can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
    use the transport button to create  transport request and release from development system .
    I hope you will not get error in Q system .
    If still facing error , Please let me know.
    Regards
    Vikas Sharma
    Robert Bosch
    Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM

  • The OLTP source 3FI_SL_J2_TT for source system BM4CLNT100 not present

    Hi All,
    iam trying to load data from r/3 for the DS 3FI_SL_J2_TT , when i see in BW , the transfer structure is inactive in Dev system. So i activated the transfer struc. but after activation also its shows as inactive.
    and also iam getting this error message : "The OLTP source 3FI_SL_J2_TT for source system BM4CLNT100 not present".
    I have checked in r/3 side , the DS is available and is in active. I have replicated the DS also in BW. but no luck.
    could you please let me know why this error occured.
    Thanks,
    Ravi.

    Hi,
    RC on Source system and perform the action check if connection is ok the try to activate that in se38
    RS_TRANSTRU_ACTIVATE_ALL.
    Regards,
    Satya

  • No IDOCS arrived from Source system to BI  for generic extraction

    Hi All,
    While loading data from r\3 generic data source to BI, I am facing the below problem.
    1. Using Full Load:-
    The request from r\3 to psa turns red after a while. The request monitor says:
    Error when updating Idocs in Source System
    Diagnosis
    Errors have been reported in Source System during IDoc update:
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Source System . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    Details Tab shows : request green
    Under that Extraction tab shows  red
    missing messages.
    Transfer (IDocs and TRFC): Errors occurred .
    Request IDoc : Application document not posted
    I ran Transaction BD87,BD73 and execute with proper selections.
    Upon checking the idoc in source system Their status is 51 , which says
    Diagnosis
    The control parameters for communication with the BW server are not
    complete. A BW PlugIn upgrade could be the cause of the problem.
    System response
    Procedure
    Depending on the Release of the BW server, proceed as follows:
    BW Server Release 1.2B: Source system: Update InfoSource metadata
    BW Server Release >= 2.0A: Source system: Activate.
    Manually i tried to push the idocs in the BW and source system using TRF but i dint found any records???
    Soruce system connection is fine. Profile parameters are set properly and its active  .. But still am getting the same problem.
    Many thanks, I'll applicate your help.!
    Rakesh

    Hi
    I am also facing the same problem. This happened after restoration of the original system with a copy of the production.
    I am not able to get the IDOC posted in the source R3 system.
    I did a debug and it failed when verifying the table, RSBASIDOC.
    There appeared to be some missing records which need to be inserted.
    I can't find a way to insert the missing record and since then, I am not able to proceed.
    Have you resolved the issue?
    can you share how it can be overcome?
    Thanks a lot

  • How data extraction influence other processes in source system?

    hi,
    does data extraction influence other functions of source system (e.g. some background jobs can not be executed due to tables lock)?
    Regards,
    Andrzej

    Hi andrzej,
    The extraction process will not have much impact on the source system's other processes. But if u have got lots of data , it might have some effect while transferring the IDOCS. but as such, there should not be a problem of not data getting extracted. Is there any particular problem which ur phasing?
    Rewgards
    Sriram

Maybe you are looking for