Idoc qualifier for field ihrez segment e1edp02

Hi all,
I am using field ihrez of segment e1edp02 twice for posting the reference ( ship to ref and sold to ref)...I could find the idoc qualifier for ship to reference is 44 ..what can i use for sold to reference.. can somebody help me with this please.
Thanks,
Kiran..

Hi ,
I am also Facing the same problem i am able to pass the reference value for ship to party using Qualifier 044..but not able to pass the value for sold to party..
please help me if u got the solution in your case..
Regards
-Arun

Similar Messages

EDI Outbound IDOC Remove unused fields from segment

Hi All,
I am configuring a outbound idoc scenario for Message type ORDERS. The basic type for this message type is ORDERS05.
The segment E1EDKA1 has 44 fields, I need only the first field and the last field of this segment.
How do I remove the unused fields in this segment ? I Tried BD56 and BD32 But they are for removing the complete segment and so does not serve my purpose.
Any pointers to this issue is appreciable .
Regards,

Hi,
Segmetns of standard message types can be deleted from BD53. But I don't think deleting fields would be possible from segments of standard idoc type. What you can do is you can create your own custom idoc type with the fields you want and allign it with the standard message type ORDERS. This should solve your purpose.
BR,
Atanu Mukherjee

Segment Qualifiers for a Balancing Segment

hi,
I was trying to set the segment qualifiers for a segment value (of a balancing segment) , the default value of Account type was displayed as "expense" . Should that be left as it is or changed?
As far as I know, the segment qualifiers of a balancing segment are mainly "Allow Budgeting" and "Allow Posting". Can the account type qualifier be "expense" for a balancing segment value?
Please clarify.

Hi,
As written in the GLUG :
Balancing Segment
When you define an account, you must make one of the segments a balancing segment. The system ensures that journal entries are balanced--debits equal credits--for each value of the balancing segment. You should make the company segment the balancing segment, so that journal entries always balance by company.
The aim of the Balancing segment is to ensure debit entries equal credit entries,
Debit and credit are entries made with any account type :
Asset, Liability, Expense, Revenue, or Equity
Abdelhakim

IDOC filter at Field / Segment Level

Hi
Can you please tell me how to set an IDOC filter at field and segment level in short?
Thanks

Hi,
There are two filtering in IDoc.
Segment Filtering:
Segment filtering can be achieved using T/Code BD56. Here you can suppress a whole segment irrespective of data inside it . You have to give Message Type / Sender Prrtner / Receiver Partner.
Data Filtering:
Data filtering can be done in dustribution model (BD64) where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Please check this link for detail information.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Populating value in idoc segment E1EDP02 for INVOIC01- incoming invoice

Hi Friends,
I am working to get the incoming freight invoice posted to MIRO, using
IDOC : INVOIC01
message type: INVOIC
process code: INVL
function module : IDOC_INPUT_INVOIC_MRM
Vendor does not send the PO number only send the bill of lading number(shipment number). So i have customised the IDOC with one segment for getting bill of lading number. My requirement is get bill of lading number and then get PO no and populate into segment E1EDP02. I am not able to populate this field and hence each time the IDOC fails with message :
Required field BELNR(001) is missing in segment E1EDP02
Required field ZEILE(001) is missing in segment E1EDP02
Please tell me how to get this field populated and get the issue resolved. I have been trying to figure out for couple of days but no success OR My approach is incorrect for posting invoice to MIRO with populating field segment.
Please suggest.
Thanks
Deepak

Thanks everyone for getting the issue resolved. I have implemented implicit enhanencement and before the function module strarts procesing, I loop over segments and fill up the PO number to E1EDP02 for bill of lading number. There was also a case of error handling for IDOC. That is to check if the amount sent by vendor is correct as compared to the amount on the shipment cost docuemnt, if they dont match then I need to send an email to the business informing them for bill of lading number and amount. There is also another check to find out if the bill of lading number has already been invoiced, if invoiced I again need to inform the business user.
So keep all the requirements in mind I went with Implicit enhancement, thus populating the required segment and if the validations fail for amount or invoice document already generated, then I send the mail to business with bill of lading number and reason of failure. In such case IDOC is not executed and after sending the mail, the logic exits out of function module.
I

The IDOC-SDATA for the segment E1EDP01 does not have the whole value passed

HI
I am triggring the ORDERS05 Idoc from TCode - WE19 .
In the E1EDP01 segment I have populated the quantity field , UOM field , currency field and the plant field.
I am facing the issue
1) It is not updating the plant field in R/3 orders that are created .
2) I debugged the code and found that the data for the currency field and the plant field is not being pulled in the IDOC-SDATA for the segment E1EDP01 .
Any idea why is this happening
Thanks
Nikhil

HI
I got the answer for it.
This has to be delt in the E1EDP02 segment with the qualifier value as 083 and the document value as the plant
Thanks
Nikhil

Field Prof.Segment is a required field for G/L Account 2100 454010

Hi Controlling Copa Expert,
user facing problem, at the time of Business Transaction , getting error while MIRO, " Field Prof.Segment is a required filed for GL 454010, kindly let me know where and wht input parameters for the same. Prof. Segment.
we have made Copa Report. as per client requirement. in this regard , as i understand ,all P&L GL Cost element field status group Profit Segment Required entry. just wht happened while doing Miro, getting error for 327225 i.e Price Diffrence gain. earlier FSG was G029 but i did changed Profit Segment Required entry . copy from G029 and given new name COPA . and copa FSG Profit segment required entry.
but finally we have change like earlier FSG i.e G029, coz at the time of Miro Profit segment filed was there but is was not active for input parameters. finally we have resolve the issues without Profitability segment... but its not right. so kindly requested to you ... where i have to config in Copa report.
Kind regards
Pranav Kumar
SAP FICO Consultant.

HI Hursikesh,
i want to give PSG at any how, if i give as optional problem resolved but Profitability denouement will not generate. we want to give PSG at any how, because we have made FSV financial statement version in FI . client want match through COPA Report. kindly help me how all the business transaction updated with Profitabilty Document generate.plzzze.
client want material cost under GL Group Head :- Manpower ,Consumables and Energy GL already assign in PA Structure, under Conversion cost . and revenues. so it will come gross Profit. but revenues updated based on Condition Types .. i don knw why nt updated.. as i understand user skip the PSG thats the reason , thats why i given FSG as mandatory in relevent GL FSG .now tell me wht should i do . for this issues scenarios matching with FSV with COPA report.
Note : in FSV P&L Account if m not wrong. not balance sheet item. FYI.
yr quick action will be highly appreciated.
Kind regards
Pranav
SAP FICO Consulatant.

BADI-User exit required for updating Purchase order header field -IHREZ

Hello All,
We have requirement in our business to update the purchase order header field "our reference" EKKO-IHREZ with some text field. We need a BADI/user exit that can be used for updating this field . We have checked the BADI ME_PROCESS_PO_CUST and unfortunately we are not able to use this BADI as it getting triggered in enjoy SAP transactions ME21N , ME22N etc. We are not creating the purchase order manually and we are using ME59N for creating Purchase order . Hence we are looking for some user exit/BADI that can be used in ME59N for updating the purchase order header field IHREZ.
Thanks in advance for your immediate response .
With regards,
Joseph Anand B

TRY using the exist u2022 EXIT_SAPLME59_001
You can also later on add this field by BAPI_PO_CHANGE

Idoc from XI to R3 losing fields and segments

The idocs I have posted from XI to R3 seem to lose some of the fields and segments.
The idoc is sent correctly from XI but the idoc posted in R3 have less fields and segments.
Any idea?
Thanks

Hi,
Check in transaction IDX2. You may need to delete the Idoc Type Metadata from IDX2 and then resend your XML file to XI. It will then generate the new metadata.
Also, there was once when we encountered this case but simply deleting it from IDX2 did not fix the problem. We then deleted the entry directly from the table IDXEDSAPPL and that fixed the problem.
You may also want to refresh your XI cache via tcode SXI_CACHE.
Thank you.
Best regards.

Segments E1EDK04 and E1EDK05 in IDOC ORDERS05 for PO's

Hi all,
I am using program RSNASTED and form ALE_PROCESSING to generate IDOC ORDERS05 for purchase orders. This works fine but, eventhough the purchase orders contain tax conditions (NAVS) and several header discounts (e.g. RA01), the relevant segments, E1EDK04 and E1EDK05, are not included in my IDOC.
Anyone have an idea how to include these segments?
Thanks and regards, Patrick

Michal_Krawczyk_PIXI wrote:
Hi,
>
> if your SAP version is <4.6A then you need to do it manually
> if not then it should work automatically
>
> Regards,
> Michal Krawczyk
Michal, Sorry it is not working as expected.

IDOC: INVOIC - for more than one purchase order

Hello Experts,
I have an IDOC INVOIC for incomming invoices.
The problem is, that in case of more purchase orders (GR was posted with the same delivery number!) the IDOC can not be posted, because it just finds the first PO (invoiced quantity higher than GR quantiy).
How can i reach, that the IDOC finds all PO with the same delivery number (from GR) und splits up the the relevant purchase orders!
In Segment E1EDP02
i have qualifier 016
and BELNR = is the delivery numner by GR (the delivery numner is the same for all POs).
Many thanks in davance,
Hannes

Hi Prashant
1-I accessed form Setup > Transactions > AutoInvoice > Grouping Rule and removed (Group by) Data at the table
2-at system opiton i made this rule used
3-i Created 2 sales orders and shipped it
4-Post to the Receivables
it generates 2 invoices for every sales order not one invoice for the two sales order
what's my error
Regards
Amr Hussien

Working on LSMW using IDoc method for processing Open Sales Orders

We are currently in middle of creation of a new instance of production for a different Business SBU. We are looking to utilise the LSMW tool using IDocs for uploading / transferring the open orders to the new box. If some one has worked on LSMW using IDocs, please get in touch and if you could share any documents on the process of utilising the LSMW tool using Idocs for any kind of conversions, it would be great. The following is a sample case.
1. Each order will have multiple segments with different qualifiers under various segments.
2. Multiple line items would be available under each order.
Issues we are currently looking to solve :
1. How do you manage to loop through the qualifiers during processing for the same segment.
2. How do you prepare the tool to recognise the multiple line items of the same order.
3. What kind of strategy needs to be used to create the input data file(s). Like, splitting the header and detail level information ?
Note : The volume of data we are looking at is somewhere around 40-60 thousand orders worldwide.
Thanks in Advance.

hI vikram check this link
and reward points if helpful
http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
http://www.jt77.com/system-dynamics/model-01395.html

EDI IDOC generation for interface with Vendor software help needed.

EDI IDOC help needed.
We are NOT an EDI shop, but have a project to output data to Sales Force.com
Sales Force requests IDOC output - eg. 810 Outbound Invoice.
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments?
I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Basicall we have a report program that the user enteres in the date range of Order/Quotes/Invoices they wish to extract, the the program needs to output a flat file (.txt) on the server which is then picked up by Sales Force.com.
Also, is there a way to have in the Partner Profile a generic Partner under the "Type KU" that can be used for all orders/invoices so I don't have to create a KU Partner Type for each and every Sold-To customer we have?
I am very new to EDI so any help would be greatly appreciated.
Thanks.
Scott.

Hi Scott,
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
I know it's very tempting to use an interface for such loads if you anyhow have to create one. However, often the volume alone speaks against interface usage for such scenarios.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments? I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Well, the E2* segments basically reflect the external name of the IDoc segment, whereas the function modules you're referring to basically just create an internal version of the IDoc. Once the IDoc framework then passes the IDocs to the partner, the segment names usually (depends on how the IDocs are passed on) get converted to their external name. If there are multiple versions of a segment, then the version number will be appended to the segment name.
Note that IDoc segment definitions are only partially stored in the data dictionary. If you want to see all versions you should always use transaction WE31 to look at segments. There you can also see for example for E1EDK01 the several versions and when you then use in SE37 function module SEGMENT_EXTERNAL_NAME_GET you will see what SAP produces as the external name for segment E1EDK01. This function module is basically the one that handles the segment name translations.
Ignore the comments for subsystem, this is basically an option in SAP to possibly trigger further external tools (e.g. mapping etc.) for handling the outbound IDocs.
Again, the funny thing is that via the WE30 transaction, if i put in INVOIC02 as the Obj. name and see the segments, i can see that E2EDK01 there is a version 005, but if i go to SE11 and put in E2EDK01005 structure line and i get a "not found". We just have up to E2EDK01002.
In the old days SAP used to generate E1, E2 and E3* structures in the data dictionary (SE11). The E1* structure reflected the character type representation of an IDoc segment, whereas the other two (definition and documentation) contained actual references to data elements (e.g. if you used a quantity field). However, in newer releases those dictionary structures (E2* & E3*) are no longer generated, because they're superfluous (meta data defined via WE31 is sufficient).
Cheers, harald

Qualifier for Tax amount in E1EDK04

Hi,
I want the qualifier for Tax amount in E1EDK04 segement in INVOIC idoc.
Thanks
Mohan

Use any of the methods in (Note: 259722.1 - HOWTO Determine Table and Column Name from a field in a form in 11i) to get the correct field/table name.Thanks Hussein
Before this I tried with all other options except the one using trace file. This has solved my problem. :)

Idoc numbers for a certain output in Sales Orders

I have more than hundred Sales Order
One EDI output was triggered (with a unique partner type) from each of these Sales Orders.
How to find idoc numbers for all these Sales Order for this particular output?
I tried WE09 giving Segment and field with value....two issues with this. first is it is not working for me...not records found.
Secondly It take one value at a time. I can't do this for every Sales Order
Is there any database table or something else to find these idocs?
Thanks a lot!

Hi,
if this special partner type is the partner type of the IDoc receiver, then you can search for relevant IDocs in transaction WE02.
If you need a partner type out of the sales order data, then it is stored in table EDID4 "IDoc Data Records".

Idoc qualifier for field ihrez segment e1edp02

Similar Messages

Maybe you are looking for