Idoc received ONLY with WE19

Hello,
i have implemented in SAP R/3 4.7 an idoc custom outbound to Tibco.
The problem is that... with WE19 in SAP I have status 03 and Tibco RECEIVE the idoc but... with custom transaction I have same status (03) but Tibco NOT RECEIVE idoc.
All configuration in SAP are OK!!!
Have you any idea?
Thanks a lot
Paky

Hello Bala Raja
See partner profile(WE20) define correctly or not
Thanks
Amit Shivhare
PS: Rewrad Point

Similar Messages

IDOC Receiver problem with 7.11 and ECC6

Hello,
we have a IDOC_2_IDOC scenario on old XI system which worked fine.
We are moving now to PI7.11 and get the problem, that all IDOCs in the receiving ECC6 system
go to status 51 "No status record was passed to ALE by the application"
It seems to be a problem of processing of too many IDOCs at the same time,
because if there is enought ime between the IDOCs the the procsing in ECC6 works.
Only if too many IDOCs are sent from PI to ECC6 then I get this error.
I have checked aRFC and tRFC options in SM59 but there is no difference.
IDOC packing is not activated on sending system and on PI.
At the moment the scenario should work as is worked on 7.0......
Any ideas which setting is different or where to look?
best regards
Werner

Hello,
which ALE settings do you mean???
on PI or receiving ECC6
PI:
here we only use SM59, IDX1, IDX2.... for IDOC adapter
ECC6: only partner profile INBOUND PARAMETER
On the sending R/3 system I can not change something.....and there was no change.
best regards
Werner

IDoc processed only by WE19?

Hi,
I am unable to process the IDoc by IDoc processing program.It shows warning status by doing this.
But the same IDoc could be processed and posted if I use only WE19(Test tool for IDoc Processing) both in the inbound and outbound system.
Can any one pls explain what would be the solution to this?
Regards,
Bala Raja

Hello Bala Raja
See partner profile(WE20) define correctly or not
Thanks
Amit Shivhare
PS: Rewrad Point

Outlook Email Receiving only with Outgoing SMTP IP address instead of domain URL

I am new in domain system, i set up domain controller myself at my office, every thing was working fine, but after 3 or 4 days outlook was unable
to receive email on client machines. the only way i find was to enter ip address of my domain (i have purchased and hosted from third party) in outgoing SMTP Server address. emails are receiving well without ip but only error is at receiving.
i dont know where i am wrong. this is annoying too much.
plzzz rsolve my issue.
Thanks in advance

Hi Salman,
According to your description, Outlook on client machines couldn’t receive emails until entered IP address of the Outgoing SMTP server? What about sending emails, are there any issues?
In addition, have you tried to run NSlookup.exe in command prompt as Sean suggested?
More information for you:
Nslookup
http://technet.microsoft.com/en-us/library/bb490950.aspx
Nslookup
http://technet.microsoft.com/en-us/library/cc725991.aspx
Best Regards,
Amy

File to IDoc scenario - IDoc received with Errors

Hi,
I tried to send send IDoc from a file to SAP R\3. The communication channels are working fine, and I get the IDocs in R\3 but with status 56. When I examine the received IDoc structure in transaction "WE19", I see that the receiver port(SAP + SID of sap server) is blank with no values. I tested the IDoc adding the receiver port, and the IDoc got successfully posted...
I wonder why the receiver port that I specified in payload file content, does not reflect during runtime. I'm using the downloaded MATMAS IDoc structure with sender and receiver details as the input from file....
Please help me out!
Thanks!!
-Ajitha

Rodrigo/Sarvesh/Ravi/Haseeb,
Thanks for the inputs!! I have checked in IDX1 and the port name is the same. Also "Apply control records values from payload" checkbox is selected. I guess there was some problem with cache. It started working fine, when I started a new session
Thanks for your time and inputs!!!

Info IDoc received with status 8 infopackage hanging in yellow status

Hi All,
when I extract the Text data without data selection it is fetching the 14 record into BW and changing the status to green,
however when I go with data selection it has No record for this selection in RSA3 as well in BW .
when I do this data selection in infopackage in BW it is bringing ' 0 ' records and hanging in to yellow status in RSMO for more than two days. it is not turning it to red/green
it shows in Monitor with message " Info IDOC received with status" in yellow status.
I have found the OSS 713427, it is already had this correction .
when I check in SM37 job is completed immediately.
there is no short dump
Many Thanks
Ramm

Hi Robort,
thanks for reply
there is no data for this data selection and there is no IDOC processed in BD87 or we02.
I checked out the note and its only for IDOC stuckup .
may I have any other suggestion.
many thanks
Ram

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

Info IDoc received with status 8 in BI but Data available in source system

Hello Experts,
I am loading Budget Period (attributes) into PSA in BI.
Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
Data source: 0PU_BDGTID_ATTR
This is full load.
I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Already looked this thread and googled also.
Re: IDoc received with status 8.
Check points:
sm58 - NO issue
BD87 in ECC (RSINFO Idoc status: 03) -sucessful
BD87 in BI (RSINFO Idoc status : 53)
ST22 - NO issue
sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
I am not sure if I am missing any thing.
Thanks
Rana

Hi all,
I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
RS3 (R/3) - > 0 data
ST22 -> no short dump
WE05 (Idoc) - > everything is ok
I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
Any ideas?
Thanks
jak

Inbound IDOC Failure with WE19

Hi , we are testing a standard IDOC CONF21(inbound) with the test tool WE19.
We have created a FILE port in WE21
We have created a partner relationship in WE21 with inbound parameters (process code CON2)
In WE19 we have populated oly sender and logical message type, plus the segment data. When we try th IDOC in WE19 we have an error in the control record: (partner profile not available)
IDoc 0000000000001027 Current status: 56
        Control record Direction: Inbound Sender: LS/ /IDOCTEST
        Data records Total number: 000001
            E1CONF2 Segment: 000001 CC2 confirmation structure
        Status records
            56 IDoc with errors added
    Message: EDI: Partner profile inbound not available
Is there anyone who can help me for this problem ?
Tanks and Regards,
Riccardo.

Yes we have created a partner profile in WE20.
This is the check log, it seems to be correct...
     Partner profile IDOCTEST /LS
     Header entry (table EDPP1)
     Correct partner status
     Recipient of notifications exists
     Entries for inbound processing (table EDP21)
     Entry IDOCTEST /LS/ /CONF21 /
     Process code (inbound) exists

IDoc received with status 8

Hi Experts,
Please find the below Error now i am getting.
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Please provide me solutions ASAP, this issue.
Thanks & Regards,
Bharathi.

Hi Ananda,
I have followed ur post, but same problem i am facing.
The Error below following:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Please give me any other solutions, how to resolved this issue.
Thanks in Advance.
Regards,
Bharathi.

If I set my phone to receive Imessages with my phone number ONLY, will that prevent someone else from having them sent to their device?

If I set my phone to receive Imessages with my phone number ONLY, will that prevent someone else from having them sent to their device?

If I'm correct, as long as someone is logged into your Apple ID, they can receive your messages. If you think someone else is using your Apple ID, change your password.

Wanting to connect an older G4 Powerbook running OS 10.4.11 to a Marantz SR4023 receiver amplifier with only RCA inputs to play iTunes through it on stereo speakers. Can anyone advise how to do this?

Wanting to connect an older G4 Powerbook running OS 10.4.11 to a Marantz SR4023 receiver amplifier with only RCA inputs to play iTunes through it on stereo speakers. Can anyone advise how to do this? Not tech savvy at all here, and will be happy with a simple hard wired connection. The Powerbook is old, and I no longer want to use it for anything but connecting iTunes radio, and my iTunes library to my stereo system.

Hi,
There were many PowerBook G4 models (http://support.apple.com/kb/HT3065) with different ports (http://support.apple.com/kb/ht2369).
If necessary, a manual can be found here:
http://support.apple.com/manuals/#PowerBook%20G4
Generally speaking, the output of a headphone port can often be used for the connection to an amplifier. You would need an appropriate cable (typically, 3.5 mm stereo plug to two RCA plugs). Choose a suitable amplifier input (high level). Do verify the allowed amplifier input voltage levels and the impedance before you connect.
Jan

Why do I receive messages with only a date, no subject, no from, no body, etc.?

at varying times I receive messages with a blank subject, no entry in [from, to] no body, but a date in 1969.
Any ideas why I receive these?

Thank you for your help.
I tried emptying the inbox, deleting the 2 files, and restarting TB.
I did the same for Sent and Trash.
I also deleted all .msf files for all inbox sub-folders and for all folders and sub-folders under "My Mail".
the problem persists.
My inbox has many sub-folders and sub-sub-folders should those be moved to My Mail?
Another problem I am having. I do not know if it is related.
I have a stack of filters that move incoming mail into folders. The stack ends with 2 filters.
(1) a filter that checks whether FROM is from someone in my mail lists. It then moves the message into a folder called "Known Sender".
(2) a psuedo-ELSE filter that check whether the subject contains a very improbable string. It put the message in a folder called ") Suspicious".
Sometimes I still end up with folders in Inbox that clearly should be in the two folders, "Known Sender" or ") Suspicious".

HT201320 Why can i not receive email with my icloud account but I can send it out only

Why can i not receive email with my icloud account but I can send it out only

Hi Nortarian,
The article below will walk you through the troubleshooting steps for email on your iPad:
iOS: Unable to send or receive email
If you are unable to send or receive email, try the following steps:
Restart the iOS device.
Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
Try an alternative Internet connection.
If your email is provided by your Internet provider, try connecting from the home network.
If your iOS device has an active cellular data plan, try to disable Wi-Fi: Tap Settings > Wi-Fi and turn off Wi-Fi.
If not, try a different Wi-Fi network.
Log in to your email provider's website to ensure that the account is active and the password is correct.
Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
Hope this helps ....
- Judy

A problem about IDOC Receiver

Hi, everybody.
This time, I'm developing a IDOC Receiver though the SAPIDocReceiver class. With the dotnet Connector manual from SAP, the receiver side on dotnet is easy to develop. But how to configure the SAP R/3 to send IDOC to the dotnet side, I can't find the clear steps in the manual.
So I searched some material about how to configure IDOC, and hope it will be useful to my work. But most of them mainly focus on how to configure a IDOC transformation between SAP system but not NON-SAP system.
So what I want to ask is IS there some difference with the two configuration, I mean the SAP to SAP one and the SAP to NON-SAP one. I guess the difference should be have. Are the necessary configure step like create a logic system, allocate logical systems to clients and so on also necessary under the NON-SAP case? I think some of the configure actions is different in this two case. Can anyone give me some clear steps or tell me where I can get them?
thanks to all.

Hi,
for testing purposes you can do the following:
(1) via SM59 create the RFC destination for your dotnet application
(2) via WE21 create a trfc-port pointing to the RFC destination created in (1)
(3) via SM30 maintain view V_TBDLS to create a new logical system for your dotnet application for example DOTNET (and maybe for the SAP client you are testing with - here the name could be for example <SID>CLNT<CLIENT>)
(4) via SCC4 assign the logical system to the SAP client (for example <SID>CLNT<CLIENT>) only if not already maintained.
(5) In WE20 create a partner profile for logical system created for the dotnet application in step (3)
(6) In WE20 add outbound parameters for the message type (for example MATMAS) and idoc type (MATMAS03) you want to send. As partner port use the trfc-port of step (2)
(7) In WE19 create an IDoc via basic type (the idoc type used in step (6), for example MATMAS03) and maintain the following fields in the control record EDIDC:
recipient port the port created in step (2)
recipient partner number the logical system name of the dotnet application created in (2)
recipient partner type'LS'
sender port SAP<SID>, where SID is the SAP system id
sender partner number the logical system name the SAP client maintained in step step (4)
sender partner type'LS'
message type the message type used in step (6), for example MATMAS
In the other segments E1* you can fill in whatever you like
Hit the push button "Standard outbound processing"
(8) you can check if the IDoc has been sucessfully created by BD87. If an error has occurred in the receiving application or there is any other error you can also see it here. Maybe the IDoc is not passed to the receiver, then you can process the IDoc also from here.
This is how you can create your test environment. If you want to get the IDoc created form the SAP application it depends on the application how to do that!
Best regards,
Willy

Idoc received ONLY with WE19

Similar Messages

Maybe you are looking for