IDOC RSRQST is getting stuck frequently, it leads to delay in data loading
hi,
we are using SAP R/3 4.7 E and SAP Netweaver 2004s as BI server .
On daily basis we are loading the data from R/3 to BI system . we are facing problems in data loading
IDOC RSRQST is getting stuck frequently, which leads to delay in data loading..
Please guide me to resolve this issue .
Thanks in advance .
Thanks for your reply kumarsen . I have gone through the referred forum .
In my case , I have checked the TRFC, conncetivity between R/3 and BW and Job scheduled as priority C .
Still many Idocs are got stuck in R/3 [approx every 5 min once] . we are releasing the Idoc's through BD87 only .
Please suggest for some permanent solution .
Similar Messages
-
My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.
Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely, -
My macbook( Late 2010 model) gets stuck frequently. This started happenning after I ve downloaded some apps from the Mac App Store. I ve found some errors running Verify Disk Permissions in Disk Utility. It says "Some errors cannot be repaired".
When you are using an overclocked bus, sata 1 & 2 don't get locked properly, so their frequencies increase as well. This will cause problems with attached devices. 3 & 4 have a functioning lock and this is not a problem. I'm not sure about the safely remove hardware icon, try looking at the properties of the disk under device manager and see if theres a setting or something.
Has the problem gone now you have moved the drive? -
SQL developer get stuck frequently
Hi
I am experiencing a major problems with SQL Developer.
The program seems to hang very frequently and sometimes requires me to kill the process and restart it.
Sometimes it occur even when I am in the process of writing a query(Usually then it will hang for shorter periods of a few seconds)
Other times it occur when I run long queries, and then the program might get stuck completely and I am forced to kill the process.
I am currently using sql developer 1.5.5 with JDK 1.6.0.13
Though I installed before 1.5.4 with built in JDK and suffered the same results.
I use Windows XP with service pack 2.
Thanks
Ron
Edited by: user3332125 on Aug 25, 2009 4:51 AMHow much physical RAM to you have?
Do you have anti-virus software running?
Some versions of JDK6 are problematic. try upgrading to the latest.
Some of these hangs are due to SQLDeveloper being swapped out of memory and should eventually go away.
If you start sqldeveloper from <sqldev>\sqldeveloper\bin\sqldeveloper.exe you will get a java console window. When SQLdeveloper hangs, click on the console window and press ctrl-break. That will give you a thread dump which you can post here and the development team may be able to diagnose the cause of the hang (if it is a hang and not just a slow down)
You may also see other error messages in the java console. -
NOKIA N97 GETTING STUCK FREQUENTLY
HI Friends,
Well its been just a couple of weeks i got N97 , within this time the phone got stuck more than 5 times i have even upgraded its OS to version 11.0, the problem that occurs mostly is that the slider to unlock the screen doesn't work and ultimately have to remove the battery and then start again to resolve it but i am afraid this will effect the OS.
So please guys help me out to resolve this bug.
Thanks in advance.I don't know lots of things about n97, but you could try a soft reset. *#7370#, 12345 (default code).It will delete all your phone data, only.
If you want to thank someone, just click on the blue star at the bottom of their post -
Traditional Chinese input 注音(Zhuyin) gets stucked frequently in safari
Since I updated to Lion last night, the traditional Chinese input Zhuyin is not working in web page.
Even I switch to english and switch back, it still not working but English is okay!
At the same time the Google search bar at top right side of Safari does not have this issue.
It only happens in web page.
Snow Leapard does not have this issue too.re-send pics
fail case
pass case -
When I connect my 5s to itunes for a sync, the sync gets struck on either Step 4, waiting for changes to be applied, or "downloading safe safari data." This does not happen with my ipad. Any suggestions would be appreciated. Thx, Jimmy
Same thing has been happening to me and I havent been able to find a fix. Itunes has basically rendered my phone uselsee. It wont see it, let alone sync it.
-
My wife's iphone 3gs gets stuck on boot logo screen sometimes with a loading circle.
I have tried holding power and home buttons to restart. Problem persists.
I have also updated software. Problem persists.
I have done a backup then a restore. It worked normally for a few hours then the problem returned.
None of the youtube videos or the advice on the web has helped so far.
Any help is appreciated.I should add that I have an Iphone 4 and Itunes has no problem finding and synching my device.
-
Message getting stuck in XBQO queue - Time limit exceeded
Hi All,
We have a BPM scenario in our project (on PI 7.0 SP18), where bundle of PEXR2002 Payment IDocs are received as a single flat file. This file is then consumed by the BPM, to split the message into multiple payments using Java Mapping.
However, when we get an IDoc file of size greater than 5 MB (more than 500 IDocs), the message gets stuck in XBQO queue and eventually giving a SYSFAIL with the message "Time limit exceeded". Could you please let us know if you have encountered a similar issue and are aware of a possible solution.
Any pointers to this will be really appreciated.
Thanks & Regards,
ROSIE SASIDHARANH Rosie,
1) Goto SXMB_ADM-> Integration Engine Configuration->Parameter EO_MSG_SIZE_LIMIT->possible values 0 - 2,097,151 (KB)
The parameter EO_MSG_SIZE_LIMIT enables serial processing of messages of a particular size. This applies for messages with the quality of service Exactly Once (EO). If the message is larger than the parameter value, the message is processed in a separate queue.
2) Goto SXMB_ADM-> Integration Engine Configuration->Parameter HTTP_TIMEOUT->possible values n Seconds, where n is a whole number.
The parameter Specifies the timeout for HTTP connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
See SAP Note 335162 for sysfail issue....
Hope these will help u....
Regds,
Pinangshuk. -
Ipod fourth generation gets stuck
Ipod fourth gen:
1. I changed the hard disk myself;
2. Although the new hard disk, the Ipod gets stuck frequently: first it shows
the sad icon , then the battery icon and finally the apple icon.
3. So, i have to open it, disconnect the hard disk for a while, riconnect it and then it works.
What do you think can be the problem now since the hard disk is new
(it was replaced by vendor also)?
Do you think is a hardware problem or software, how can i find out?
Thanks a lot
Pasquale
Avellino
ItalyHello mayur_mahajan,
I would be concerned too if my iPod classic would freeze everytime I connected it to iTunes. I recommend following the steps in the tutorial below:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My iPhone is getting stuck for a few seconds everytime I do something, if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck there.
I have restored it and loaded the backed up material again. But this problem doesnt seem to go away. Sometimes it is too much sometimes it is not noticeable, so what exactly could be wrong and what ALL should I do to get it fixed? Please reply.Thank you. You are very kind. First I backed everything up, then restored as a new phone, and then i couldn't see the contacts, the contacts were not restored when i restored as a new phone. So in order to get the contacts I restored from the backup but then the same problem happened again.
What I meant to saw was that the probelm disappeared when i restored as a new phone, but it reappeared when i restored from the backup. So is there a way to just somehow get the old contacts when the phone is restored as a new phone. All I need from the current phone is the contacts to be there when I retore as a new phone.
I hope I am clear.
Kindly help -
My iPhone is getting stuck for a few seconds everytime I do something, if i type a letter it will type it twice or a few times, if i click to close the browser it stucks there for a few seconds before closing, if i try to open some app it gets stuck there.
I have restored it and loaded the backed up material again. But this problem doesnt seem to go away. Sometimes it is too much sometimes it is not noticeable, so what exactly could be wrong and what ALL should I do to get it fixed? Please reply.I did that many times, I mean I do it everytime. But it doesnt seem to help. It is strange sometimes the phone is slow and stucks for a many seconds, sometimes it is just one or two seconds. Thank you for your help though, but is there something else that you could think of?
-
I am using Outlook 2007 and exchange server. When send emails they oftentimes get stuck in the Outbox with a sent date of "None". If I restart outlook and try resending the messages, they will oftentimes go out. I am having to restart outlook 5 times a day right now. Any ideas what would cause emails going out through exchange server to just "get stuck"? Sometimes when I sent the emails and I watch the Outbox folder, the messages will appear in the outbox with a "sent" date, then after a second or so that "Sent" date will just change to "none" and the email just won't go out. Any advice on how to troubleshoot or fix?
One other note...some messages just NEVER go out 9regardless of how many times I hit restart outlook and hit send) and I need to rewrite them by creating a new message and sending and that new message.
NOTE: this appears to happen when I'm in a state where I am "Connected to Microsoft Exchange".DontPanicZ wrote:
Hello,
I found a solution that worked for me.
See: http://www.slipstick.com/problems/outbox.htm
I followed the suggestions in the article and found that I had an add-in (that I did not need). When I disabled the add-in, my problem was solved.
Text of article follows:
After viewing the Outbox, the messages in it won't send.
If you click on the Outbox while messages are waiting to be sent, the messages are marked as read and won't send.
This is caused by a Net framework add-in you have installed that 'reads' Outlook items, including the Send to OneNote from Outlook PowerToy add-in and BCM (Business Contact Manager). A list of other add-ins known to cause this behavior is listed below.
To send the affected messages, you'll need to open the message, then switch to a different folder before clicking Send on the message. Do not go open the Outbox until after the messages are sent.
To identify the add-in that results in this behavior:
Look in Tools, Options, Other, Advanced, Com add-ins. Disable the add-ins and re-enable them one at a time and test.
Since BCM and possibly other add-ins are not listed in the COM add-in list, check
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins
HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins
Export the keys then change the LoadBehavior value to 0 to disconnect an add-in. Restart Outlook and test.
Applications responsible
The following is a list of some of the applications which are reported to cause message to be marked as read. If you use these or any other add-ins, check for a newer version - newer versions of some of these applications will not cause problems.
ICQExpress (COMAddin), installed as part of ICQ
Business Contact Manager (BCM)
Send to OneNote from Outlook PowerToy
Outlock
Outlook Backup Add-in
Sierra Wireless Outlook Integration - disable in the registry. It's listed at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\SwiOutlookInt.Addin
ONFOLIO
Timeslips add-in
Attensa for Outlook. Check for upgrade: newer versions not affected.
Cisco Meetingplace plug-in
MindJet Mind Manager 6. Disable the add-in in the registry - the key is Mindjet.Mm6OutlookLinker.AddIn.2
Google desktop "search your own computer", specifically because it searches the mail
ScanSoft PDF Converter Outlook Addin
Norton AntiSpam Outlook Plugin
Norton Internet Security
AIM Sync
LinkedIn Outlook Toolbar
Salesforce
Upshot Outlook integration
MS CRM 3.0 Outlook Add-in
Xobni
Auto-Mate
RingCentral Add-in
DesktopSMS.Addin
More Information
If your mail won't send and it's not the problem described above, other possible causes are:
Authentication problems: Are you logging on to the mail server correctly?
No default mail account. If you can reply to messages but not send new message, check the account settings and make sure one is set as default. When you use a configuration script created by your mail provider or import accounts, an account is not always set as default.
See Email Won't Send - Common Causes for more information. -
Inbound Queues getting stuck up in PI7.1 for Idoc scenario Mpackg. enabled
Hi Experts,
We have an issue while processing Single Idocs in PI 7.1.
we have extended MATMAS05 and we are processing these via PI to FTP folder.
The inbound queues are frequently getting stuck.we will be sending atleast 1000 idocs every hour from R3.The processing time is very slow for this interface and its impacting other interfaces which we are currenlty having.
We have followed the webblog by William Li "Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging" but still the processing time for Single Idocs is very slow.
We have to use single idocs as we will send only the changed materials from R3.
Could you please assist us in overcoming this issue.
Many thanks in advance.
Points will be awarded for valuable feedback.
Cheers
JyotiHi Jyoti,
Message Packaging works PI7.0 SP 13 and PI7.1 .
we have to configure Message Packaging manually ,
Step 1) 1. Enable packaging for the integration server
SXMB_ADM -> Change Configuration (F9), create a new entry:
Category: RUNTIME (PI7.1)
Parameters: PACKAGING Current Value: 1 (for active) .
Default Value in PI7.0
Current Value: 0 (for inactive)
Step 2) Create "Package Configuration Type u201C
Use Transaction SXMS_BCM .
Configuration Type : Any name.
Description: any text to describe the configuration type .
Wait Time : 60 seconds
Number: 100
Maximum Package Size. 2 MB
Step 3) Create "Sender/Receiver Definition
Transaction : SXMSIF (Create New Entry).
Sender/Receiver ID:PACKAGE_DEMO .
Description :
Interface Name: Interface Name used in Receiver Determination.
Interface Namespace: Interface Namespace used in the Receiver Determination .
Step 4: Create "Specific Package Configuration"
Transaction : SXMS_BCONF .
Step 5: Package Monitoring
TX: XMSPKSTATCNF
Follow above steps and configire message packaging , then you feel diference,
actuualy i configured message mackaging,i am feeling the difference.
if any issues let me know.
Cheers,
Raj -
Hi All,
Previously we have created one outbound Idoc. we were passing data to external system via XI. it was successfully reaching to external system.
now we have added one more segment to existing Idoc. after processing doc, in WE05 transaction, Idoc status is showing as 03 i.e. data successfully passed to port. the issue is that the Idoc is not getting passed to external system i.e. XI . In SM 58, the Idoc is getting stuck up. it gives error message as below,
EDISDEF: Port SAPCAG segment defn Z2WY_SV_DLR000 i n IDoc type ZWY_SV_SPG_
Message no. SR053
Please let me know if anybody has idea on this.
Thanks,
ChandraHi Chandrashekhar,
If you are using XI/PI, go to IDX2 transaction and see whether the idoc is re-loaded successfully with new segment. If not, just delete the idoc and load it again for the port you are using. I think this should fix your problem.
Thanks,
Adithya K
Maybe you are looking for
-
How to create Multiple UOM's for a Service
How do i create more than ONE, "Unit of Measures - for a perticular Service" in a Product Category/Group ? AC01/AC02/AC03 would allow me to add "BASE UOM", but cant add more than one UOM for that service. Can we have one-to-many relation between Ser
-
Calculation of Quaterly Figures for Sales Report.
Hi, I would like to display the Sales report in the Quarterly format with respect to sales employees. For Ex :- 1)Q1-20 Lacs (April,May June 07) 2)Q2-30 Lacs (July Aug ,Sept 07) 3)Q3-25 Lacs (Oct,Nov and Dec 07) 4)Q4-20 Lacs (Jan.Feb,Mar 08)-
-
Adobe Premiere Pro CC 2014.2 Trial Version - Error when importing mts and mp4 video files
First time using Adobe Premiere Pro (and I'm using the trial version). When I try to import an mts video file (and tried to import an mp4 file as well), I get the error: Adobe Premiere Pro CC 2014.2 has stopped working. And then the program crashes
-
Bar Codes printing in SAPscript form
Hello everyone, Please help me with barcodes printing problem: We are using ECC 6.0, and printer HPLJ 2300 series PCL 6 I have installed BARCODE.DLL, and it is located in my local PC, in folder SAPgui\SAPlpd, i.e. where SAPlpd.exe file is locating. I
-
Firefox 4 will not let me keep my bookmarks listed on the side bar. I can open them there but once I click somewhere else they go away. On previous Firefox versions I could display my bookmark folders down the left side of my screen and just leave th