IDOC [SAP R/3 ] TO SAP XI TO HTTP ADAPTER....

Hi Friends...,
i am new dimension for this sap xi. i want  send idoc  from sap r/3 to Http
Adapter throw sap xi...
please give details from scratch..
i want to work on this ...
thank you very much..,
regards,
sharath

Hi,
Check this links on how to configure receiver HTTP adapter.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
and this link on how to process idocs using idoc adapter.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
Regards,
Sudheer.

Similar Messages

  • Picking a IDOC Flat File stored in SAP R/3 Application Server by SAP PI

    Hi,
    Can SAP PI pickup a IDOC Flat File stored in SAP R/3 Application Server Directory and send it back as an Inbound IDOC.
    Scenario:
    We have a data in the EXCEL Sheet, which will be used to a fill an IDOC and the IDOC will be just save in the SAP R/3 Application Server Directory, but can not be triggered due to its peculiar behavior. Afterwards, SAP PI should pole the SAP R/3 and pick up that IDOC Flat File from the R/3 Application Server and send it back to the SAP R/3 as an Inbound IDOC.
    For Ref: IDOC does not have a Outbound Process Code, thus can not be triggered and send to SAP PI. It is always used as a Inbound IDOC in SAP R/3 system.
    Regards,
    Saurabh

    SAP PI should pole the SAP R/3 and pick up that IDOC Flat File from the R/3 Application Server
    If SAP PI = 7.11 --> /people/william.li/blog/2009/04/01/how-to-use-user-module-for-conversion-of-idoc-messages-between-flat-and-xml-formats
    send it back to the SAP R/3 as an Inbound IDOC
    why to send  some information again into R3 which it already has? cant some internal code in R3 read the info from excel and then update the IDOC directly?

  • MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER

    Hi Experts,
    How the  MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER?
    Scenario : when 2nd system create the invoice,it will create a po in the 1st system.
    51 error msg we are getting material does not exists.but the material is available in the receiving plant.
    Please suggest

    If you say the material master is available in the 1st system (where you create the order), then the material number in the IDOC  may not match with the material number in your database.
    leading zeros. material number stored as alphanumeris instead of numeric.

  • How to find  at what time Idoc has gone  out  of  SAP

    Hi Gurus,
    Could  anybody  let  me  know , how to check at what time Idoc has gone  out  of  SAP in case  of outbound Idoc.
    I am not  talking  about Idoc creation date which we can  see in control records  in WE05.
    -B S B

    you have to see the status of the idoc ,if idoc status is green color ( Succesfully completed  ) then use
    EDIDC-UPDTIM ( This should be last Time)
    Date is EDIDC-UPDDAT.
    See the other table EDIDS to check the idoc status.
    Thanks
    Seshu

  • IDOC data transfer SAP to Java using SAP JCo

    Dear Experts,
              The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
                 For this data transferred we are planning to use IDOC process and for interface "SAP Java connector" we are planning to use. In this case we are having some doubts.
    1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once  "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
    2. We are planning to install "SAP Jco" in Java server. Is this correct...??
    3. Other than SAP Jco any other softwares needs to be installed or not..??
    4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
    If anybody has detailed steps or explanation please share it with us.
    Warm Regards,
    VEL

    Hi All,
      For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
    When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
    Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
    Regards,
    Velmurugan P

  • IDOC type for interface between SAP ECC and SAP F&R

    Hi Experts,
    I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
    Please help me in finding the idoc type?
    Regards,
    Krishan

    Hi Denish,
    You have 2 ways of loading data from R/3 to APO.
    1. R/3 to BW cube to APO-BW cube to APO planning area
    or
    2.  R/3 to APO-BW cube to APO planning area   
    BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
    The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
    Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
    You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
    When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
    Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

  • Move IDOC Configuration from one sap system to other sap system

    Hi All,
    I have a scenario where in we need to move the SAP Configuration including Port,partner funtions details etc to other Sap system .As per my knowledge we have some SAP Standard tables which stores all the SAP Config data .So my thought is that if we move those table entries from sorce sap system to target sap system the task will be completed however i dont know which table entries i need to move.Kindly suggest.
    Venu

    Many of these IDoc settings are not asking for transport requests, since they are considered master data (table class A). They are to be done directly in each system, because the are often linked to information that is or might be specific, like master data, logical system names, path names, etc...
    Please also search for previous discussions, you are probably not the first one encountering this issue.
    Thomas

  • How to send IDocs from a non-SAP system to a SAP system

    Hi everyone i am new to SAP R/3 System.
    Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
    There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
    Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
    Thank You!

    Hi,
    I hope this link may help you......
    http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

  • Idocs for purchase order in SAP to SAP

    Hi
    I have to send purchase order from a SAP system to a SAP system, creation and modification both.
    I found these Idocs:
    ORDER in sender SAP
    PORDCR for creation in destination SAP
    PORDCH for update in destinaton SAP
    My problem is that all of three idoc have different segments, so i have to map field by field: is there a different solutions, always using idocs and not BAPI directly?
    Thanks lot.
    Matteo Vernile.

    Hi Matteo,
    To send purchase orders you can use next Idocs:
    1. Creation -->Idoc type: PORDCR102 Message: PORDCR1 This Idoc is based on BAPI_PO_CREATE1
    2 Modification --> Idoc type PORDCH02 Message: PORDCH This Idoc is based on BAPI_PO_CHANGE
    Using standard boldSAP message determinationbold  you can create these Idocs without create any ABAP program.
    If you are not creating the Idoc using the standard Message Determination, you should obtain the data using the bapi BAPI_PO_GETDETAIL.
    Reward points if helps.
    Regards,
    Roger

  • Idoc internal number range by SAP

    Hello,
    Whenever we create Idoc, Idoc number is generated by SAP. Can we see the number range stored by SAP to create Idoc number. [No configuration made for user number range]
    If yes, kindly let me know path in SPRO or transaction to see the same.
    Thanks,
    Madhura

    Hi,
    I checked in the system and I agree with both of you. EDIDOC is the object name used for Number range for IDOCS. Also, when I checked in SNRO the current number available over there was not the one which I get while creating new idoc. I checked the function module used to find the next number that will be given to the newly created Idoc.Include LSNR3F01 in function module NUMBER_GET_NEXT
    There is call for a C-function which gets the next number.
    CALL 'ThNoGet' ID 'BNRIV'    FIELD BNRIV
                     ID 'NO'       FIELD G_NOIVBUFFER
                     ID 'QUAN'     FIELD P_QUANTITY
                     ID 'PERCENT'  FIELD TNRO-PERCENTAGE
                     ID 'NONRSWAP' FIELD TNRO-NONRSWAP.
    KR Jaideep,

  • What are the idoc to send data from sap hr to sap fi

    what are the idoc to send data from sap hr to sap fi

    Message type of IDoc depends on the data you wish to send.
    please detail on the data that you need to send in the IDocs.
    regards,
    Nitin

  • Issues with creating and sending BOM XML IDOC to SAP using 2010 WCF-SAP Adapter (without using Biztalk Server)

      I'm trying to replace an existing Biztalk 2006 Send BOM IDOC process, and completely remove Biztalk server from the equation.   The existing Bizatalk 2006 server receives an input BOM (Bill of Materials) flat file, and using a Biztalk Map (BM08),
    and Orchestration, generates an Idoc and sends it to SAP.
      In my replacement C# program, I'm using the 2010 WCF-SAP Adapter, and am trying to generate the BOMMAT03 XML IDOC it to SAP.  
      I generated the BOMMAT03 schema from SAP using the Add Adapter Service in VS 2010.  I was able to generate a BM08 XSLT from the existing BMO8 map in the current Biztalk 2006 process.  I am able to run a XSLT transform on the input BOM flat
    file, and generate an XML file from that.  
      However, I've run into a few issues.   First of which, is that the XML file that is generated from the XSLT transform is NOT the same schema as the BOMMAT03 schema expects.  It's somewhat similar, but different enough that I have to manually
    translate between the two in my code.  I've verified that both the original Bitztalk 2006 process and my replacement program use BOMMAT V3 from SAP.  Question--Is Biztalk 2006 server doing some other magic to turn that transormed XML into the BOMMAT03
    schema?    
     I ended writing code which translates the transformed XML into the BOMMAT03 schema (which is a strong typed XML IDOC at this point).
      However, when I try to send the BOMMAT03 XML IDOC, I get an exception "Object reference not set to an instance of an object."
                   idocClient.Send(idocData, ref sadapterTxGuid);
    idocData is of type BOMMAT03, and I've verified that the various fields are populated.  
      Any help is appreciated. 

    Well, putting in a MSDN subscription support ticket for Biztalk server actually helped with the issue.  They didn't find, or fix the issue directly.  But one of the examples (https://randypaulo.wordpress.com/tag/idoc/) they sent over, jogged my
    memory, and I realized in the code snippet below, I had accidentally deleted the 1st line.  Such a simple mistake, yet was easy to overlook.  The URL example is almost EXACTLY like my code, but without the transform and translation code to convert
    from input XML file to IDOC XML.  If someone is interested in that, let me know.    
    //Forgot the 1st line.  
    idocClient = new IdocBOMMAT03SIEIS_WED_BOMMAT03V3R700Client(binding, endpointAddress);
     idocClient.Send(idocData, ref sadapterTxGuid);
    For anyone else interested in knowing, you CAN send a strongly typed IDOC to SAP using C#.NET and the WCF SAP 2010 Adapter, using the IDOC Binding Client class you generated using the Add Adapter Service Reference in VS2010.  
    The one difference, which no one, not even the tech support from MS could tell me, was why the XSLT which I generated from the original map, did not transform the input BOM XML into the BOMMAT03 XML.  Instead, it transformed it into an intermediate
    XML, which resembled the BOMMAT03 IDOC XML, but still needed to be translated to the BOMMAT03 IDOC format.  
    The tech support person swore up and down that it should.  But I believe that something happens in Biztalk server, after the Mapping occurs, maybe in the Pipeline, which converts that
    intermediate XML into the final BOMMAT03 IDOC XML format.
    I do think that the examples are severely lacking in showing how to send a strong typed IDOC using C# and the WCF-SAP Adapter.  Even worse, the examples are completely lacking in how to actually generate a weakly typed IDOC.  They show how to send
    that weakly typed IDOC, but show me, or give me a class to be able to generate it.
    I realize that this is not quite the "recommended way" to do it, but in reality, not everyone wants or even needs a full Biztalk installation.   For some simple stuff like this, a C#.NET program and WCF-SAP adapter do the trick.  

  • Data Migration from SAP r/3 to SAP R/3

    Hi all,
    What is the best method to migrate data from one verison of SAP to another verison of SAP ECC say from SAP 3.1 to SAP ECC 6.0?
    This is for all SAP modules including sd, mm, pp, fi, co master and transaction data.  I know there are number of technologies to load the data such as LSMW, IDOC, ALE, DI, etc but what is the best way to extract all data feeds to be loaded back into SAP.
    Thanks in advace.

    Take a look to the following link, may be useful for you
    SAP NetWeaver - Data Migration (CA-DMI) [original link is broken]
    if helpful reward points are appreciated

  • SAP to External Non SAP Systems C++ Connections

    Hi guys,
    i should develop a C++ application that should transfer/receive data from an external Non SAP System to a SAP System (MM SD FI Modules) and viceversa,
    This bidirectional integration should be synchronous and asynchronous, depending on the data flow type,
    I was thinking to use IDocs for this communications,
    I should be able to send purchase and sell orders requests from the Non Sap System to the Sap system and receive the result of SAP processes once the SAP transactions will be finished.
    So i'll have a C++ process that send idocs (created with sdk end sent throught RFC to SAP) for SD or MM operations and a SAP Abap module that receive this idocs and start internal operations.
    After this i need an internal SAP abap module that send to my external application Idoc's with the result of internal operations.
    Are the idocs the common way to transfer data(low cadinality) in this scenario, or there is a better way?
    Note: my sap system versions are previous to the netweaver release, so i can't use a Service Oriented comunication...
    Thanks in advance!!!

    Hi,
    try sending the data through BAPI Function Module.
    and use the FM in your C++ program.
    hope this works....
    try
    best of luck!!
    thanks
    ravi aswani

  • 3rd party to sap using HTTP adapter

    Hi Folks,
        I'm sending some IDOC to sap from the 3rd party. I have to use HTTP adapter as sender and IDOC as receiver adapter.
    Can you please suggest me how to configure teh sender side. As I know there will be no such configuration for the sender adapter as it is HTTP then how the HTTP adapter will get the data sent by the 3rd party and how it will pass it on to the idoc adapter ?
    Regards....

    If you like to have more details about the http url
    then refer the below link
    http://help.sap.com/saphelp_nw70/helpdata/en/c9/775b3b82646c3ae10000000a114084/frameset.htm
    Rajesh

Maybe you are looking for