IDOC Scenario: System not configured as XI integarton engine

Hello Experts,
I have beeen trying to solve this since a few days.
I have created an IDOC scenario from SAP ECC s/m to PI 7.0.
The IDOC is being sent successfully fron SAPECC with status 03 in Transaction WE05.
But in PI 7.0 I am not able to view these messages anywhere in WE05.
SXMB_MONI of PI 7.0 shows an error record for previous trials and shows error status (red) as "System not configured as XI integration engine"
I have already set configuration parameters on PI7.0 in SXMB_adm.
Your suggestions will be appreciated.
Thanks in advance,
Elizabeth.

Hi,
you can check in PI:
- TCODE - SXMB_ADM
- integration server
- edit - change global config - check if you have: integration server set
Regards,
Divya

Similar Messages

Generated Proxy Error: System not configured as XI Integration Engine

Dear all,
Using transaction SPROXY I generated a proxy on a Message Interface.
This generated as well a method and the associated class.
When I run it, trying to send data through all this, I get the following error:
System not configured as XI Integration Engine
Here is the model I got on another thread, in order to catch the error text:
DATA: l_sys_exception TYPE REF TO cx_ai_system_fault.
*...proxy call
catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
write: l_sys_exception->errortext.
Anyone has any idea where this error commes from?
I am mostly wondering whether the problem comes from my outbound system or XI configuration?
Thanks a lot, have a nice day!
Isa.

check this thread
https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

System not configured as XI Integration Engin

Hi Experts,
My system working fine up to yesterday but today morning when i came and saw this error is comming System not configured as XI Integration Engin this error is showing in MONI ..
Regards
Rao

Hi rao,
Please see the following links.
ERROR Integration Engine configuration
one more
integration engine
Kindly reward points for useful answer.
Regards,
Vishal

System not configured as XI Integration Engine

Hi
I trigger an interface and get the error " System not configured as XI Integration Engine ". I get this error at the Call Adapter stage. How do I check in the receipient system ?
Regards

Hey,
You can find similar issue faced by other and solution in SDN.
Have a look at these threads.
System not configured as XI Integration Engine
SYSTEM_NOT_CONFIGURED_AS_XMB
regards
Ramesh

Error: System not configured as XI Integration Engine

Hi All,
I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
"2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Integration Engine
2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
what might be the possible errors..
regards,
Rajesh

Hi Rajesh,
you can go through these chek steps
1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and also perform a delta refresh.
3)Check whether your business system is tied to the integration server in SLD.
4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
hope these checks will solve your problem
Thanks
sandeep sharma
PS:If helpful Plz reward points
Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB.

Error: System not configured as Integration Engine

Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar Agarwal

Hi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use service=<SENDERSERVICE>instead of
bs=<SENDERSERVICE> parameter in your URL.
bs is replaced by service in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?service=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani

Error "system not configured as xmb" in transaction "sxmb_moni"

Hi,
when I send an IDoc from R3 to XI I get this error:
system not configured as xmb" in transaction "sxmb_moni"
also, in the adaptermonitor of the runtime workbench there is an error in the integration engine.
"no rules for business-system are definied in SXMS_CONF_ITEMS"
This error refers from a another error in transaction idx. so, we have assigned the integration engine client 100, because we work with this client. So, we can start transaction idx5 but, we get the other error, as mentioned.
Can anybody help me please?
Regards
Stefan

Hi Stefen,
try to chk SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server if not try sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine
pls chk for this links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceba9b90-0201-0010-9687-a8b279e388bb
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
if found worth pls do the req
Thanx
Sampath

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

System not configured as Integration Engine

Hi Friends ,
I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
When I run the zprogram in R3 then I get the error
System not configured as Integration Engine ...
Please suggest .
Best Regards
Chan

Hi Chane,
Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
Refer this Configuration Guide - Page no 27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy

Change and transport system not configured

hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
Madhu

Hi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v

File to IDoc scenario-CREMAS not getting posted

Hi Experts,
i am doing a file to idoc scenario in which i am giving the xml file from MDM ,consisting of Vendor Master data and posting the address and the general data into the ADRMAS and CREMAS idocs into the R/3 system.
The problem that i am facing is that the ARMAS is getting posted correctly but the CREMAS is getting posted with the red signal,status 51.It says "Not authorized to change the Vendor Centrally."
Can anyone please tell me what is the reason and the solution for this problem?
Is this a data error or XI error?
Thanks in advance,
Shweta.

Hi Shweta
Status 51, 52 means Posting error
Please check wheteher all the configuration has been done or not
SM59-rfc destination
IDX1-port
IDX2-load metadata
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
After That check the solution it is due to Authorization
File to idoc - IDX5 Error
Regards
Abhishek Mahajan
*Please reward points if helpful**

B2B scenario with IDocs, sender system not in SLD

Hello all
When sending a purchase order IDoc (ORDERS05) out of SAP ECC 6.0 I get the following error in SM58:
No service for system SAPPEE, client 200 in Integr ation Directory
Message no. SR053
Until now I did not register the SAP ECC 6.0 system in the SLD. Is this absolutely mandatory?
The RFC-Destinations work like a charm, the user (type C) and authorizations (for now SAP_ALL) should be ok (same settings in XI and SAP ECC system).
In the integration directory I defined a partner "IDOC_SENDER" with the following identifiers:
Agency = http://sap.com/xi/XI
Scheme = XIParty
Name = IDOC_SENDER
Agency = PEE_200 (SID with client from customers system)
Scheme = ALE#LI#LF
Name = 0000601140 (this is the vendor id from customers point of view)
Agency = AEE_200 (SID with client from vendors system)
Scheme = ALE#KU
Name = 0000001011 (this is the customer id from vendors point of view)
Within this partner "IDOC_SENDER" I defined a business service "Order" and assigned ORDERS.ORDERS05 as allowed outbound-interfaces.
Within this business service "Order" I defined a sender communication channel "Order_send_IDOC" with adapter type IDoc.
Based on this I created a receiver determination, interface determination, etc.
I also configured things in IDX1, IDX2. The metadata (structure info of idoc type ORDERS05) was successfully loaded.
Did I miss something? What to do to eliminate this error:
No service for system SAPPEE, client 200 in Integr ation Directory
Message no. SR053
Any help would be greatly appreciated!
Thanks in advance
Renaud

I think there are some mis-configurations:
defined a business service "Order" and assigned ORDERS.ORDERS05 as allowed outbound-interfaces.
You do not define a business service when IDOC/ RFC/ PROXY is sender/ receiver
It should be Business System and it has to be defined in SLD and then imported in ID. (search on SDN for How to create Business System )
defined a sender communication channel "Order_send_IDOC" with adapter type IDoc.
You do not create Sender channel when IDOC/ PROXY is sender.
I would suggest that you follow steps mentioned in this wiki: http://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
Regards,
Abhishek.

File to idoc scenario error - not working yet :(

Hello! I'm trying to make changes in business partner record in CRM using idoc CRMXIF_PARTNER_SAVE_M01
I have an error 56 EDI: Partner profile not available.
In Control record in we02 transaction, I have right Partner number for Recipient information - logical system name like CRM has in SLD. But there is no Port.
In Sender information I have right Partner number, like my filesystem business system has in SLD and have a port SAPP1D - but I have nowhere entered it!
And one more little question. In we20 transaction am entering inbound parameters for partner:
CRMXIF_PARTNER_SAVE
CRMXIF_PARTNER_SAVE_M
1) Is this right inbound parameters for my idoc?
2) What Process code should I use ?

Hi,
in XI in IDX1 transaction, maintain a port for CRM system specifying the CRM port and the client and the RFC destination from XI to CRM system.......moreover if you are using apply control record values from payload option in reciver IDOC comm channel, then in the IDOC control record in msg mapping map the sender port to CRM port, partner number as logical system of CRM ie C2DCLNT100 and partner type as LS..........then when you will re-run your scenario, your IDOC will have CRM port also in the control record..........
in CRM system your WE20 for LS for XI should have as an inbound parameter your IDOC - which i think you have already done.........
One more thing - put everything in uppercase letters everywhere in msg mapping in control record data, in we20 setting etc.
Regards,
Rajeev Gupta

ALE Configurations in File to IDOC Scenario

Hi All,
We are doing File to IDOC Scenario.
ALE Configurations done:
R/3 Side:
1. Created RFC dest, pointing to XI and tested the connection for remote login to XI.
2. Created port in R/3(using automatically generated port name) and assigned the RFC dest created above.
3. Created partner profile and assigned the ports to the message types.
4. Created Logical system
XI side:
1. Created RFC dest, pointing to XI and tested the connection for remote login to r/3.
2. Created port using IDX1 transaction with port name starting with SAP<SID> and assigned the RFC dest created above. (SID of XI)
3. Unable to load metadata in XI.
Now we are unable to test the scenario as it provides an error message in MONI as "Error: Transaction IDX1: Port SAP<SID>, client , RFC destination contain errors".
Also Let me know whether the steps mentioned above are correct for the scenario.
Regards,
Nithiyanandam

Hello,
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP XI towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is #####+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
With Regards,
Vidya.
*******Reward with Points if found useful

** File to IDoc scenario - IDoc not created in target system

Hi friends,
We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target system. What could be the problem?
We are using DEBMAS message type DEBMAS06 IDoc type. We checked the following.
1) SM59 - Connections are OK both application and XI system
2) IDX1 - In XI System, we have assigned SAP<R/3> port.
3) IDX2 - IDoc is imported.
4) In ID - Sender File - Business Service - Adapter-Specific Identifier - Logical System name is given.
5) In application system. - Partner Profile maintained correctly.
6) SM58 - There is no error.
So, what could be the reason ?
Kindly reply, friends,
Thanking you.
Kind Regards,
Jeg P.

Hi,
Check all the steps ..
File to IDOC
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Thanks,
Satya

IDOC Scenario: System not configured as XI integarton engine

Similar Messages

Maybe you are looking for