Idoc segment not apperaing for PO creation.

Dear All.
Sceanrio:
Once PO is created , NEU ouptut gets triggered.On release of PO, it generates an outbound idoc.
Issue.
In this outbound idoc the segment E1EDKA1 WE is missing.This segment gives the Ship to address in the PO, ie normally the plant address to which the material is shipped.
Analysis:
This PO has 3 line items and these are created by reffering 3 different PR s.So my question here is , whether is this standarad SAP behaviour where Ship to address segment wont get populated into idocs for multiple line item POs.Why i am asking this is that, if suppose the PO has 10 different line items , with 10 different plants.Each plant has different address.Then how system will decide which ship to address will populate in E1EDKA1 WE segment.
Or is there any other behaviours, when the PO has multiple line items.
Please let me know your thoughts on this.
Regards
Shyam

Hello Shyam ,
The reason for this behavior could be that tthe items in the IDOC have a different delivery address maintained in the Ourchase Order. If the delivery address for all items is the same , the segment E1EDPA1 with qualifier WE will be not populated. Instead of generating E1EDPA1 , the system will create one E1EDKA1 segment with qualifier WE. This will prevent on receiving side the creation of the same delivery address for all items.
I hope this information has been helpful.
Best Regards,
Frank Farinella

Similar Messages

Valid size not available for this creation when using Greeting Card feature

Using PSE9 with a Mac. When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
"Valid Size Not Available For This Creation". (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working). I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result. Has anyone else run into this problem, and if so have found a fix? Thanks.

I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
Copy your Photoshop project files (and any folders) to your mac.
Open the project files as you would with any other Photoshop file.
You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
Good luck.

Photoshop elements 12 "valid size not available for this creation"

I see the message "valid size not available for this creation" when I am in organizer and I try and go to create a collage, photo book or any of those options. I have tried to see what other people have done by changing their location to usa/Canada but that didn't work for me. Can you help me resolve this? Thanks!

The error means that Elements is experiencing problems calling up the templates from the media database. You may need to close elements and then rename or delete the following system file and then re-launch the software and wait whilst the database is re-created. find:
Mediadatabase.db3
The following link gives further information:
http://helpx.adobe.com/photoshop-elements/kb/error-valid-size-available-creation.html

Valid Size not available for this Creation (Greeting card only) - Elements 10 for Mac

I purchased Adobe Photoshop/Premiere Elements 10 for my MAC and am getting "VALID SIZE NOT AVAILABLE FOR THIS CREATION" when I try to create a GREETING CARD only. All other options in CREATE work.
I have read other forums on here and have tried everything they have said and it still does not work. I have tried:
opt, cmd and shift to delete preferences
uninstalled and reinstalled
performed updates on both my MAC and the program
Can anyone PLEASE suggest other solutions to this problem? Perhaps I am doing something wrong. Thanks!

Hi - My file structure is somewhat different than the file structure that you describe in the first part of your note (My system is Windows XP with Service Pack 3). This is what my file structure looks like:
    C:/Program Files/Adobe/Elements 10 Organizer/locales/en_US
         >application_swfs
         >Plug-Ins
         >Suppport Files
No Creation Graphics folder, no Kodak Gallery Folder, no files with the name E9_preview_photocard_1(or2).jpg.
I perfromed a hard drive search on filename E9_preview_photocard* and found these files under:
     C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\10.0\Locale\en_us\CreationGraphics\local
I performed a hard drive search on Kodak Gallery and found the file under:
     C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\10.0\Locale\en_us\CreationGraphics\Kodak Gallery
This Kodak Gallery folder contains 10 files, 2 of which appear to be related to Greeting Cards. These are 5x7_adobe_folded_cards and 5x7_adobe_folded_cards_zoom
Regarding the 235x120 greeting files, I search and found these under
     C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\10.0\Photo Creations\photo layouts
NOW WHAT???
thanks

"Valid size not available for this creation"

I've installed the Photoshop Elements 10 with the language JP successfully, but Greeting Card does not work at all; "Valid size not available for this creation" (JP: この作品で使用できる有効なサイズがありません) can not be resolved, even though followed the instruction (http://helpx.adobe.com/photoshop-elements/kb/error-valid-size-available-creation.html). MediaDatabase.db3 is on C:\ProgramData\Adobe\Photoshop Elements\10.0\Locale\ja_jp\. Pls. anybody help me on this !

Try elvidgeg's solution in this thread:
http://forums.adobe.com/message/4248143#4248143

Why an Error Message "Valid size not available for this Creation" in Elements 10 Photo Collage

I have several image editing programs, but I bought Elements 10 specifically to do things the others wouldn't. I wish to make a photo collage but all I get when I try, after following the instructions in the "help" and "Elements 10 for Dummies" is an error message stating "Valid Size not available for this Creation." A meaningless phrase anyway because nowhere does it request a "valid size." Please will someone tell me the magiac words to make my lovely collage automaticaslly, or shall I revert to doing it manually on one of my other excellant image editing programs?

http://helpx.adobe.com/photoshop-elements/kb/error-valid-size-available-creation.html
If nothing there helps, see post 4 in this thread:
http://forums.adobe.com/message/4248143#4248143#4248143

Elements 9 photo collage - message "valid size not available for this creation"

Hi There,
I am trying to creat a photo collage in Elements 9 and always get the message "Valid size not available for this creation.". Has anybody figured out a fix for this bug????????????
Thanks
Roy

http://kb2.adobe.com/cps/927/cpsid_92734.html

Fill IDOC segment, E1IDBW1. For PEXR2002 Basic Type

Hello Team.
We send the IDOC for the Basic Type PEXR2002, Message Type PAYEXT.
This IDOC doesn't fill the Segment E1IDBW1 (IDoc header - special instructions (INP) )
I'm review some notes(1164524) and said to fill this segment it's neccesarie config the IHC.
But doesn't have this functionality.
It's possible fill the segment E1IDBW1 in a user exit or any other enhacement at creation idoc moment?
My idea is used the FM
CALL FUNCTION 'GET_SEGMENT_POS_FOR_INSERT'
    EXPORTING
      I_BASIS_TYPE            = ch_edidc-idoctp
      I_EXT_TYPE              = ch_edidc-cimtyp
      I_SEGMENT_TYPE          = 'E1IDBW1'
    IMPORTING
      E_INDEX                 = li_tabix
    TABLES
      IT_EDIDD                = t_edidd
    EXCEPTIONS
      BASIS_TYPE_NOT_FOUND    = 1
      EXTENSION_NOT_FOUND     = 2
      EXTENSION_ERROR         = 3
      INVALID_IDOC_DEFINITION = 4
      IDOC_ERROR              = 5
      INVALID_SEGMENT_TYPE    = 6
      INVALID_START_INDEX     = 7
      NO_MORE_POSITION        = 8
      TOO_MANY_SEGMENTS       = 9
      OTHERS                  = 10.
To Fill 2 constants in this segment.
Do you have any other idea?
Thanks
Edited by: David Lezama Gonzalez on Sep 1, 2011 2:51 PM

Hi,
Basically the segment E1IDBW1 will always be filled via user exit.
If you work with the IHC (In-House-Cash) application you have to fill
the E1IDBW1 segment as described in note 626577.
If you don't work in an IHC environment the following conditions must
be fulfilled:
1. The payment program has to fill certain fields (e. g. REGUH-DTAWS,
REGUH-DTWS1 - REGUH-DTWS4).
2. If this is fulfilled the payment data (REGUH, REGUP tables) will
be filled. The instruction keys will be moved to IDOC segment
E1IDKU3.
3. In user exit EXIT_SAPLIEDP_002 you can take over the instruction
keys from segment E1IDKU3 into E1IDBW1.
You may also read note 496663, this note explains about user exit
EXIT_SAPLIEDP_002 to populate this field in the idoc.
Also, you can check the note:
580321 - RFFOEDI1: BTE process 00002441 (Change IDoc)
REgards,
Cristiano

IDOC or Web service for Vendor creation/updation from XI to R/3

Hi,
We have a scenario whereby the vendor master details in R/3 need to be created/updated by the data sent from XI. We are on XI 3.0 and R/3 ECC5.
The options that we need to analyse best suiting the requirement are whether to use Web Service or whether to use IDOC.
I am not very experienced in the usage of Web Service so it will be very helpful if you could please help me with the scenario build up and how it will update the records in R/3.
From the point of view of the IDOC usage, the standard IDOC CREMAS03 is available to update the Vendor master data whereby the data is sent to XI in XML format and the data is mapped to IDOC structure and pushed out to R/3. I have checked the SDN forums and there have been discussions baout certain settings that need to be configured first to enable this IDOC scenario.
Can you please help me in analysing which option to go for and what are the pros and cons of both and the complexity of implementation and if there are any rerequisites that need to be met for either option?
Please advice.
Regards,
Archana

Hi,
Thanks for the suggestions and I personnaly favour the IDOC. However, the solution is not only looking at creating new Vendors in the R/3 system but also looking at updating the existing Vendors with the incoming data form the 3rd party.
Can the same standard IDOC create and update the vendors or do I need to look at 2 different IDOCs?
There will be a daily polling of data files via XI. The file format is going to be .txt and will be comma seperated.
Is there any way of checking in XI itself the file duplication before transferring the data to R/3 as and when the files are received?
On R/3 side, we were currently thinking of going forward with ABAP proxy which can create IDOC and then send the mail or somehow inform the business that some data was incorrect and therefore the IDOC's were not created for them or should we do it via RFC?
We will also go forward with the custom table contianing the file names received till now to check for the sequence serial number.
Please advice.
Regards,
Archana

IDoc segment not reaching XI

Hi,
I have a peculiar problem where the values populated in an IDoc segment are not coming to XI, though the values are visible in the sender SAP system, they are not present in the IDoc XML generated in XI.
Please help if someone faced a similar problem.
Thanks
Pushpinder

Hi,
Check if problems are raised on Cache of Design side of your IB.
Environment - Cache Status Overview
Then "Clear Data Cache".
And try again.
Regards,
Giuseppe

Outbound Idocs are not generated for some material number MATNR

Hi all,
We are using a custom program to process the IDOCS to some other thirdparty systems.
but the problem is the IDOCS are not generated and also we can't find the IDocs in TRFC also.
But it is working for the other matnr.
I have already debug the custom program, and it is taking all the inputs correctly.
plz guide me guys

Hi Praveen,
This is the code I am using
LOOP AT GS-MATNR_WERKS ASSIGNING <MATNR_WERKS>
GS-COUNT = GS-COUNT + 1.
    GS-TEXT = 'IDOC for Material & & (& of &) is just being created'(001).
    REPLACE '&' WITH <MATNR_WERKS>-MATNR INTO GS-TEXT.
    REPLACE '&' WITH <MATNR_WERKS>-WERKS INTO GS-TEXT.
    REPLACE '&' WITH GS-COUNT            INTO GS-TEXT.
    REPLACE '&' WITH GS-LINES            INTO GS-TEXT.
    CONDENSE GS-TEXT.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              TEXT = GS-TEXT
validation code for the MATNR & WEKRS
CALL FUNCTION 'Z_MASTERIDOC_DISTRIB_ZCOPEBOM'
         EXPORTING
              MATNR        = <MATNR_WERKS>-MATNR
              WERKS        = <MATNR_WERKS>-WERKS
              MESSAGE_TYPE = P_MESTYP
GS-CREATED = GS-CREATED + 1.
    GS-COMMIT = GS-COMMIT + 1.
    IF GS-COMMIT >= 100.
      GS-COMMIT = 0.
      COMMIT WORK.
    ENDIF

Missing IDOC segment during invoice for specific user

Hi Experts,
While doing a post goods issue and generating an invoice, the idoc generated from this has missing segments, this only happens when using a spcecific RFC user name (with all authorizations enabled), however, when using an ordinary sap account, the idoc is created successully with no missing segments. Do you have any advide on what seems to be causing the issue? Any help is very much appreciated.
Thanks in advance.

yeah
u go to TCODE WE30 and give ur object name and enter.
then u will see all the segments related to ur object.
u can double click on each segment and see whethet it is mandatory or not.
regards
jai
please reward if helpful.

Buttons not enabling for JCO Creation in SLD

Hi Experts,
When i logged in into my Webdynpro Content Administrator with administrative rights, all the button like Create JCo Destination, Maintain JCo Destination and Start assigned SLD are getting disabled expect Check SLD Connection Button.
Moreover, displaying a message : "Connection to System Landscape Directory (SLD) could not be opended successfully." at the bottom of the screen.
When i click on the Check SLD Connection Button and then Test Connection, it gives again the same message i.e "Connection to System Landscape Directory (SLD) could not be opended successfully."
Now, When i click on the Check SLD Connection Button and then Start SLD, SLD server is staring and running.
Another thing is, When i am starting my sld server from logging in into http://<hostname>:<port>/sld, SERVER status is running. I stopped it and again started, then it is starting, but giving an error message as:
"Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes."
When saving any parameters like profile information, it is not saving and saying error as:"
Cannot save profile settings CIM_ERR_FAILED: Failed to initialize cluster notification sender."
My setting are correct in SLD Data Supplier in Visual Administrator. I had filled the host/port/user/password information for both "HTTP Settings" and "CIM Client Generation Settings".
It went worked well earlier, i come across this problem recently with my sld.
Another thing that i noticed is when i click on the "CIMClient Test" button, its getting an error message saying "Failed to Generate and Test CIMOMClient Object". But, ealier it came as successfull.
I have full authorization to use admin tools.
What might be the problem.
any help must be appreciated.
regards
sunil kumar

Hi Sunil,
We just had this issue couple of days before, this has to do with the JMS Provider Authorization. We did the following steps to solve our issue:
I. Default security configuration of JMS resources is in place (this is by far the most common scenario) and named anonymous users have been created.
Change the mapping of the "clients" jms role as follows:
1. Start the Visual Admin
2. Browse the tree in the left pane
<SID> -> Server 0 -> Services -> Security Provider
3. The "Policy Configurations" tab should be selected by default on the right hand side
4. Select the "service.jms.default.authorization" node from the "Components" list (should be the nineth entry from the top down)
5. Select the "Security Roles" tab
6. Select the "clients" node from the security roles list
7. You should see on the right hand side "Security Roles" list in which the "guests" node is marked
8. Switch to edit mode by pressing the change button on top (pencil icon). The "Modify" button should now become active
9. Press the "Modify" button
10.Select the "all" entry from the "Security Roles" list. The "Groups" pane should show one entry named "Everyone"
11. Press the "Save" button
12. Restart the cluster so that JMS and applications using it can reliably reinitialize.
Check
Note 971249 - JMSServerSecurityException thrown accessing JMS resources
for more details.
Hope this helps!
Regards,
Preetha Rethinam

Valid Size not available for this creation - how do I get rid of this warning

How Do I get rid of this warning to open the greeting card dialogue box in Photoshop elements 10?

Method 1: Open Organizer in Elements 10,
Edit > Preferences > Adobe Partner Services. choose Canada/ USA for as Location. Hit OK.
Try this to see if you're able to use greeting card dialog.
If that doesn't solve your issue,
Method 2: Follow the steps outlined here: http://helpx.adobe.com/photoshop-elements/kb/error-valid-size-available-creation.html
Let us know how it goes.

Tnsnames not working for connction creation

1.1.0.22
I believe this was working for me x.x.97 the previous release. Not working now. If I enter manually all is well.

I just checked. This worked fine in 1.1.0.21 and still does.
When I run 1.1.0.22 the network alias list is empty. Why all of sudden do I have to set an environment variable? I dont have to set the environment variable in the older version? Something has changed in this new build.

Idoc segment not apperaing for PO creation.

Similar Messages

Maybe you are looking for