IDoc segment version issue in ECC upgrade from 5.0 to 6.0

Hi experts,
we are in the process of upgrading our ECC environment from 5.0 to 6.0. We have quite a few interfaces which use ORDERS/Invoice Idocs in customised form. In ECC5.0 environment, we had developed a Z segment in the ORDERS Idoc and the segment release was set as 640. Everything worked fine in ECC5.0.
In upgraded environment, SAP has released new version of some segments. one of those is E1EDP01. This segment has 2 new versions in ECC6.0 environment - 007 and 008. This change in the version changes the data in the IDoc and hence interface goes in error at the EDI provider.
We have tried to use 640 as the IDoc segment release in the partner profile of the IDocs. This still gives us an issue because the 007 version of the segment E1EDP01 has release 620 and hence the Idoc picks up 007 version instead of 006 version as desired. When we change the partner profile with Segment release in the IDoc type as 46C, it gives us an issue in the Z segment saying that the IDoc segment is not released in 46C and the Idoc goes in error.
has any one faces such situation in the past? if yes, please throw some light.
Thanks in advance.

Please let me know if your issue was resolved. I have similar issue now.
Thanks,
Sailaja

Similar Messages

SAP ECC upgrade from EHP6 to EHP7

Is GTS upgrade from NW 7.2 to GTS 7.3 to be mandated as ECC is getting upgraded from ECC 6.0 EHP6 to EHP 7 . Why?

Hi John,
Your statement looks a bit misaligned.. There is no GTS 7.3 version, the SAP Netweaver 7.3* application server on which SLL_LEG GTS component sits.
The underlying Netweaver AS versions between ECC and GTS systems can be different BUT what needs to be the same is the GTS plugin component in ECC and GTS components in GTS system itself, as best practice they should also be on the same support pack level.
If the ECC upgrade from ehp6 to ehp7 requires you to upgrade SLL_PI gts plugin component in ECC, then in this case you should upgrade SLL_LEG component in GTS system to the same version.
I personaly dont think its required, but check Service markeplace for, PAM Product-availability-matrix and other ehp 7 requirements..
Hope this helps,
Branio

Issues during technical upgrade from version 4.6C to ECC 6.0

Dear All,
We have done a technical upgrade from version 4.6C to ECC 6.0 and encountered following issues -
In the t-code ABZE (acquisition with in house production) there is a check-box for reversal posting on screen with version 4.6C. However, this field is missing in ECC 6.0. Why so?
In the report s_alr_87012327, there is a field "only with creation block" in version 4.6C. However, this field is missing in ECC 6.0. Why so?
Request to kindly suggest the alternative to carry out the same in ECC 6.0.
Thanks in advance.
Regards,
Dhawal

Hi Akshya,
Please find answers below.
1) 4.6c is NON-UNICODE system, Can I upgrade it into ECC 6.0 UNICODE system?
Yes you can.
If you are on a single code page system then you can give a gap between your uprade and unicode conversion. There is no problem with the singlecode upgrade and conversion.
But if your system is MDMP then you will have to do the CUUC method that is both upgrade and unicode conversion together. Though you can give a gap and sign an disclaimer with SAP it is still not recomended way.
2) 4.6c does not have any ITS system installed. If we upgrade it to ECC6.0 ABAP only, then Can I activate WAS internal ITS?
Yes you can activate it.
3) 4.6c does not have any JAVA stack. When I upgrade it to ECC 6.0, can I upgrade it to dual stack (ABAP+JAVA)? If yes, then how?
After the upgrade and unicode conversion you can install the java stack.
Regards,
Ravi.

Issues during technical upgrade from 4.6c to ecc 6.0

Hi
We are doing a technical upgrade from 4.6C to ECC 6.0. Some transactions in QM module when tested in ECC 6.0 test client give a abap termination message (or dump) and certain transactions like qs42,46, qa18, qs34 etc do not get executed (error = no entry foound for......) and similarly in PP-PI module transactions like C203 have similar problems, even though master data does exist. What should I look for? Can somebody pl. give details on configuration checks and the OSS notes from a functional point of view for a technical upgrade?
For certain transactions I get the error message - "Central system of distribution SM-P06CLNT430_TRUSTED is unreachable RFC destination SM_P06CLNT430_Trusted does not exist" - what does this mean?
thanks
BE

Hi,
1. Have you done successfull installation from 4.6C to ECC 6.0 at the time of PrePare ans SAPUP?
2. Check SP' for QM and PP-PI modules from http://service.sap.com/sp-stacks.
3. Configure RFC connections correctly, SM_<SID>CLNT<No>_Trusted automatically created, not manually.
http://service.sap.com/notes --> search for RFC trusted connections for Ecc 6.0
http://service.sap.com/upgrade.
Regards,
Srini Nookala

Idoc segment version in idoc type

hi,
we have just upgraded our R/3 system from 4.6c to SAP ECC 6.0. We then tried to send idocs to SAP XI 3.0 SP 20. However the idocs failed due to wrong segment version of idoc. It did not match the loaded metadata in XI. I know that in WE20 you can control the segment version used to send to XI. In the communication channel in XI you can also set the segment version.
So my question is: Is the correct way to handle sytems requiring diffenrent verions to import the newest metadat in idx2 and then control the versions asper the above paragraph?
Any comments are apreciated.
kr Rasmus

Hi,
for sending IDocs to XI no adapter is necessary. It should be enough to reload the metadata in idx2:
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm
Regards
Patrick

IDOC Segment Version

Hi,
My requirement is that I need to post an IDOC with segment version 3.1H.
I have imported metadata for 6.40 ( I have no choice of picking up the Segment Version while importing in IDX2). I configured receiver IDOC Adapter with Segment Version option set to 31H.
Now I run in to error at runtime
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
Obligatory Node E1EDK01 not present.
I have already tried to re-import the metadata.
I ran the report IDX_CHECK_METADATA to check for any inconsistencies. There are none.
Any clues what is going wrong here?
FYI, the integration runs find if I remove the 31H from the Segment Version in the IDOC Adapter.

hi,
please try to remove metadata and afterwards send message
regards,
wojtek

Usage type issue with PI upgrade from 7.01 to 7.11

Hi guys,
We are currently performing an upgrade on our PI system.
We are upgrading from PI 7.01 to PI 7.11 and we've come cross an issue during the prepare phase of the install.
An error has occurred during the execution of the CHECK_SUPPORTED_SOURCE_USAGES phase.
This upgrade doesn't support upgrade of sap.com/MI usage detected on the source system.
You can find more information in the log file /usr/sap/PI3/upg/java/log/CHECK_SUPPORTED_SOURCE_USAGES_SSU_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words: com.sap.sdt.j2ee.phases.PhaseTypeCheckSupportedSourceUsages com.sap.sdt.j2ee.tools.check.NegativeResultException This upgrade doesn't support upgrade of sap.com/MI usage detected on the source system. CHECK_SUPPORTED_SOURCE_USAGES INIT PREPARE NetWeaver Upgrade SAPJup Java Upgrade
When reporting problems to SAP Support, attach the trouble ticket file /usr/sap/PI3/upg/java/log/TroubleTicket_01.txt to your message.
We've looked through the main upgrade notes and they mention which usage types are supported, but they do not mention explicity what usage are not supported, and how to proceed with the upgrade if your system does have one of these non-supported usage types.
Considering our system does contain usage type MI, does this mean that we cannot upgrade our current PI system to 7.11?
Please help!
Thanks,
Steph

Hello
Please see note #1247043 Release Restrictions for EHP 1 for SAP NetWeaver PI 7.1 - section "Upgrade: source system must be a dedicated PI system".
It is not possible to upgrade an existing system with the usage type MI. Even if you delete the usage type MI (if this is possible) the upgrade will not be possible.
Regards
Mark

PC crash... getinng back an InDesign CS6 version, which was an upgrade from a CS3 product... looks like the serial number I have is for the initial CS3

I had InDesign CS3... which I upgraded in 2012 to CS6... two days ago my PC crashed... and I need to reload InDesign... I downloaded from Adobe.com InDesign CS6... but when entering my serial number, I got a message saying that my serial n° is valid but that there is no eligible product on my PC... I suspect that my serial n° is related to the initial C3 version I had bought... I guess that I could download CS3 from Adobe.com... and use my serial number... but how I do get back my CS6 upgrade? Thanks a million for any hlep!!!!!!!!!!!!!!!

OK, here is the situation:
* I am an Adobe customer
* I bought in 2008 CSInDesign CS3 and I have the serial n° [removed by moderator] in my Adobe account (shows as Adobe InDesign, version = CS3, platform = Win)
* In 2012, I upgraded my CS3 to CS6 and I have a serial n° [removed by moderator] for that in my Adobe account (shows as Adobe InDesign, version = 8.0, platform = Win)
After my PC crash, I downloaded InDesign CS6 and use my serial n° of 2012. It doesn't work, as it says my product is not eligible.
So, here is where I stand now...
* I downloaded CS3 and used my serial n° for InDesign CS3. It works. I now have CS3 on my PC
* How do I get back my 'upgrade from CS3 to CS6?
* I have the serial number for that upgrage and I guess I need to download an "upgrade" file somewhere from Adobe. But I cannot find it, I found pages with upgrades, but there are so many different files, I do not have a clue which one to use;
This is now my key question... can someone give me the link to access the file(s) I have to download to upgrade my InDesign CS3 version to InDesign CS6

ECC Upgrade from ECC 5.0 to ECC 6.0 EHP4 - impact on XI 3.0

Hi,
We are palnning for upgrade our ECC System from ECC 5.0 to ECC 6.0 EHP4. We do not have any plan of upgrade on XI, which is on XI 3.0.
After ECC upgrade please provide the impact on XI 3.0 ?
Will XI 3.0 able to work with ECC 6.0 without any change or any change is required in the XI configuration level, please specify?
Thanks.

>>Will XI 3.0 able to work with ECC 6.0 without any change or any change is required in the XI configuration level, please specify?
As far as I know, no change is required in XI configuration.
Regards,
Praveen Gujjeti.

Issue in oracle upgrade from 9i to 10g.

Hi,
I have an MS access application running on oracle database.Recently database is upgraded from 9i to 10g.
After upgrade application is facing the conversion problem.it is throwing an error on varchar and time stamp field showing invalid timestamp message.NLS setting of both the version is same.Please suggest.

Thank you,
Here are the answers of your queries.
Yes,This is affecting only MS access application because no other application is accessing this database.
No,No other component of the application is changed or upgraded it is only database which is upgraded.
The error is ORA-06502:PL/SQL:numeric or value error:Character to number conversion error.(In the application the value of this field is defind as Double and in database table it is VarChar and the system was working fine untill database upgrade after upgrade it is giving above error.)
For another field it is giving the error "No valid timestamp" although the same was working fine before upgrade.
No I have not traced the actual sessions but from the backup of 9i I have checked NLS setting and compared it with 10g and found that both are the same.
Hope I have not confused you.

Why am I having performance Issues with an upgrade from CS2 to CS5.5?

I am struggling hard with an upgrade from InDesign CS2 to CS5.5 (part of CS5.5 Design Standard)
There is a very slow response when trying to produce a 45 page document which needs many .jpeg images inserting, sometimes up to six on each 3-column page. While InDesign behaves sort of normally on text only pages, it slows to a virtual standstill when on the pages with images. (But this is what its for and I didn't have this problem with CS2!!)
Having read through some of the postings on this topic I have followed all the advice without success :-(
1) disable LSD in Preferences – Interface
2) disable thumbnail display in Pages
3) adjust view settings to Typical with Raster and Vector Images greyed out
4) disable Save Preview Images with Documents
5) check Links before opening documents
7) switch Preflight off
I shouldn't need to do all this should I???
I am operating with the following:
Packard Bell ixtreme M5740 64 bit
Intel Core i5 CPU [email protected]
4.0 GB RAM
ATII Radeon HD5570 graphics card 2779 MB available memory, 1024MB dedicated
plenty of free space – 274GB on c: drive and 296 GB on a D: drive
My hardware conforms to/exceeds the Indesign recommended hardware spec. Oh yes I am working on my local drive and I don't have these problems with Photoshop or Illustrator CS5.5.
Has anyone an idea about what's going on?
I've lost a good 6-8 hours so far trying to sort it out. Any help and observations will be gratefully received!

Hi Peter
Thanks - I've found that the files were marked as 'hidden' and thus by switching them on gain I was able to recreate the original location. Regrettably this has had absolutely no effect on my problem. :-(
I have now created a fresh document, studiously linking all my images properly (similar number to a DK 'Eyewitness Travel Guide') and by the time I got halfway through its 80 pages, InDesign had slowed to a crawl - ie 15-20 seconds to respond to any command. It is clearly doing something that it thinks necessary despite all the 'workarounds' people have suggested. Please please Adobe what's going on???

IP Phone 7921 / 7925 roaming issues after WLC upgrade from Version 7.2 to 7.3 and / or 7.4

Hi,
We have a customer which is using a Cisco WLC 5508 and 3502I APs. As he used the 7.2.103 release, There were no issues with VoWLAN. Now he needed new APs and ordered the 2602I. To use them he needed to upgrade the WLC to a 7.3 or later release. After the upgrade, he now encounters problems while roaming with the phones. The phones were tested with FW 1.4.1, 1.4.2 and 1.4.3.
Configuration is set according to wireless voice design guides (VoWLAN DG 4.1, 7921 Deployment Guide). A Cisco TAC is also in progress, but they seem to be uncertain whether it is a wireless or CUCM issue, but I don't see a reason why it should be the CUCM when the only thing changed is the WLC Software Version.
Is there anybody who is aware of such issues and can offer help?
Thank you in advance.
Best regards,
Patrick

Hi,
we had a TAC ticket open with this customer and after some time, the TAC gave us the advise to use this release and the problems are now solved.
So for others having the same issue: If you only need to support the 2600 APs, stay with the latest 7.2 release as there are some issues with the 7.3 and 7.4 release. If the customer requires HA, AVC or any of the new features + wireless voice, be very careful as it seems that the newer releases are having problems with that. I hope that Cisco will fix this very soon.
regards,
Patrick

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

ABAP Webdynpro Rendering issues after ECC Upgrade

Dear All,
We recently upgraded ECC to EHP 7 (Netweaver 7.4) but our Portal is still at Netweaver 7.0 EHP2 SP16.
The ABAP Webdynpro iViews in Portal have the following issues. ( We use IE11).
1. The ABAP Webdynpro Table filtering is not working. When I click the filter button it does nothing.
2. The cursor in the Input fields reset back to the first position while typing and create a big mess.
Any help appreciated.
Thank you.
PK

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

SAP NetWeaver 7.0 ABAP Trial Version Issues - cannot start NSP from MMC.

I am trying to install the the SAP NetWeaver 7.0 ABAP Trial Version on Windows XP Professional. The installation ended without errors but now I can not start the NSP instance from MMC. The message server and dispatcher processes both start but message server stop after a few seconds. The dispatcher also stops after sometime. Appreciate any inputs on this. Thanks a lot.................

I was getting similar kind of issue while installing SAP ABAP trail version. After going through documents I found if there will be any SAP installation on that system earlier it will not install SAP ABAP. I format my system, install ABAP server, Install SAP GUI in order. Now it is working fine.
If you do not want to format your system then remove all entry from registry or use virtual PC. I prefer ro use Virtual PC.
Thanks,
Prakash

IDoc segment version issue in ECC upgrade from 5.0 to 6.0

Similar Messages

Maybe you are looking for