IDOC (Source) to JDA data base(thru XML files)

hi,
Source structure is a IDOC. I have to pass IDOC data to Function module(Z function). it will return some hierarchy levels. (For example if it's generates 12 hierarchy levels), i have to pass each hierarchy level data to one XML file.
According to my understand source is IDOC and target is some intermediate data type. In between i am calling user defined function. it will generates the hierarchy levels and i have to pass the hierarchy level data to intermediate data type.
this logic is correct or not?
if this is correct how to pass data from user defined function to intermediate data type.

Windows app should work. Web app will not. See
[1218745 - Chart backgrounds are not transparent when report is viewed over the web |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Also below is copy of a reply to another forum thread I did on what I think is a similar issue:
The limitation is specifically with viewing reports on the web. The trouble is that when you view a report in a web browser, we convert each graph on the report into a picture file, and display that picture in the HTML page. In this case, if you have one picture file on top of another, the top one will cover the bottom one. The only way to make it look transparent as it does in Crystal is to combine both charts into one picture. Unfortunately we don't have the ability to put two pictures into one file, that's simply one of our limitations. At this point the only work around is to export the report to PDF and view that instead.
Ludek

Similar Messages

How to export a data as an XML file from oracle data base?

could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
Bala

SQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2    doc DBMS_XMLDOM.DOMDocument;
3    xdata XMLTYPE;
4
5    CURSOR xmlcur IS
6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8                              ,xmlelement("EmployeeNumber",e.empno)
9                              ,xmlelement("EmployeeName",e.ename)
10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11                                                      ,xmlelement("Location",d.loc)
12                                         )
13                   )
14     FROM   emp e
15     ,      dept d
16     WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19    OPEN xmlcur;
20    FETCH xmlcur INTO xdata;
21    CLOSE xmlcur;
22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
.

Data Source for BSEG Data base table

Hi Every one,
I need to create a data source for the data base table BSEG (Function Module Extraction).
I have followed below steps.
I have created extarct structure which contains all the fields of BSEG Data base table.If I save the data source I am getting error.
If I remove all the currecy fields from extract structure, I am able to activate the data sorce.
So Could you please explain me how to extract currency fields.

Hi,
Firstly, can you explain why you need a generic extractor for BSEG? There are already 2 datasources for BSEG, they are:
0FI_GL_4
http://help.sap.com/saphelp_nw70/helpdata/en/0c/b4973c115a6f3ae10000000a114084/frameset.htm
0FI_GL_14
http://help.sap.com/saphelp_nw70/helpdata/en/49/5700570223413085021a8b4ef1087a/frameset.htm
To use 0FI_GL_14, you should use the new GL in ECC side.
On the other hand, for your problem, your problem may occur if you did not give the reference unit field of your currency field in your extraction structure. when you double click the the currency field, you will see the ref. field, give the reference unit field in this area.
Regards.

How to update data in a xml file.

I am able to retrieve data from a xml file but not able to update data. Also how can i add or delete node from a xml file.

Hi,
For some time I have also been trying to do the same thing with no success. So far I have tried a few approaches like $.post functions $.ajax post functions and HTML5 fileWriter functions. I am not well aware of the web development techniques but as fas as I understand the post or update of the json file should be done on the serverside mainly because of security issues. I am not sure how appbuilder works entirely and if there is any way to do this.
Have you managed to find a solution ?
(P.S. my goal is to update my chart data which is of course json file. So the idea here is to get some values from the user input and update the json file values then refresh the chart and display it with the new values).
Best Regards,
A.Dyankov.

Adding data in an XML file

how to add data in xml file from textbox in c# without overwriting???

Hi,
As Andy said, add data to an xml file is overwriting, if you mean append data to xml file, please look this article:
http://codesamplez.com/programming/linq-to-xml-tutorial, Since this issue is more related to ASP.net, you could also ask this issue in asp.net forum:
http://forums.asp.net/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Create a Purchase order using the BAPI using the data in the XML file.

Hello Gurus,
here is the scenario can anyone help me how to proceed explaining the procedure?
Create a Purchase order using the BAPI using the data in the XML file.
comprehensive explanations are appreciated.
thanks in advance.

hi,
first use fm "bapi_po_create".
then use fm "BAPI_ACC_GL_POSTING_POST"
The demo environment was made with real business scenario in mind, but following subjects need to be addressed in a live implementation:
     No exceptions and error handling is implemented, except the order rejection (e.g. partly delivery);
     In Navision both XML Ports and the XML DOM has been used to integrate with SAP XI, because XML ports has some drawbacks regarding to Namespaces in XML Documents (mandatory in SAP XI);
     A minimum of SAP and Navision customization is required to implement this solution. (e.g. user exit in SAP, Navision XML DOM).

Error in Reading data from a xml file in ESB

Hi,
i created a inbound file adapter service which reads data from a xml file and passes it to the routing service and from there updates to the database.....
(everything created in jdeveloper)
But i am getting error....it is not getting updated to the database...when i check the database(select * from table) its showing one row selected but i couldnt find the data....
Transformation mapping also i did...
i think may be some error in reading the data from the xml file but not so sure.....
please reply to this mail as soon as possible its very urgent

Michael R wrote:
The target table will be created when you execute the interface, if you set the option on the flow tab as instructed in step #6 of the "Setting up ODI Constraint on CLIENT Datastore" Section.
Option Value
CREATE_TARG_TABLE trueHi Michel,
This was not my required answer.I am sorry that I was unable to clarify my question.Actually
+This project executed successfully with some warning.Target Table is automatically created in database and also populated with data.But when I right-click Target Datastore(in >Mapping Tab of the Interface), and then select Data to View Data that needs to be inserted in the target table.I get some error like this:-...+This above line is the result of my project my problem is
when I right-click Target Datastore(in Mapping Tab of the Interface), and then select Data to View Data that already inserted in the target table.Is not shown by the view data operation.
I meant to say I am facing this error
At the10(1010 written) step of
Creating a New ODI Interface to Perform XML File to RDBMS Table Transformation
wehre it says
Open the Interface tab. Select Mapping tab, right-click Target Datastore - CLIENT, and then select Data. View Data inserted in the target table. Close Data Editor. Close the tabs...
In my case when I use my sqldeveloper I can see data successfully inserted in my target table and also in error table (data that can't satisfy the constraint) .But I was unable to check this by following the above mentioned 10 th step and got this error.
Thanks

Error while uploading master data attributes thru flat file

while uploading master data attributes thru flat file i am facing the below errow. can nyone let me know plz.
Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCDEIO_MAT5_ATTR was found in a new

This just means that you changed the transfer rules/transfer structure and have not refreshed the workbench yet. The infopackage data hasn't been updated ... this is similar to a datasource update, where you need to replicate to make sure BW knows the latest version.
The best way to correct this error is to reload RSA1. Every time I make a change to the tr/ts, I always run /nrsa1 to refresh the workbench.
Brian

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

Pooling data from an XML file to another XML file using File Adapter

Hi,
I am trying to Pool data from an XML file to another XML file using File Adapter. I have added "Target Namespace" in both the XML and XSD.The problem is "At the destination given in the FileAdapter" only a blank XML file is created and it doesnot have any data.
Kindly suggest me some methods
Thanks in Advance.

Ok here is a solution with external tables.
SQL> CREATE DIRECTORY my_xml_dir AS 'E:\oracle\Log_files\UTL_AKIVATST'
2 /
Directory created.
SQL> DROP TABLE my_xml_et
2 /
Table dropped.
SQL> CREATE TABLE my_xml_et
2 ( EMPNO NUMBER,
3 EMPNAME VARCHAR2(10),
4 JOB VARCHAR2(10),
5 HIREDATE DATE,
6 SAL NUMBER
7 )
8 ORGANIZATION EXTERNAL
9 (
10 TYPE ORACLE_LOADER
11 DEFAULT DIRECTORY my_xml_dir
12 ACCESS PARAMETERS
13 (
14 records delimited by "</EMP>"
15 badfile my_xml_dir:'empxt%a_%p.bad'
16 logfile my_xml_dir:'empxt%a_%p.log'
17 FIELDS
18 (
19 filler char(2000) terminated by "<EMP>",
20 EMPNO char(2000) enclosed by "<EMPNO>" and "</EMPNO>",
21 EMPNAME char(2000) enclosed by "<ENAME>" and "</ENAME>",
22 JOB char(2000) enclosed by "<JOB>" and "</JOB>",
23 HIREDATE char(2000) enclosed by "<HIREDATE>" and "</HIREDATE>",
24 SAL char(2000) enclosed by "<SAL>" and "</SAL>"
25 )
26 )
27 LOCATION ('emp.xml')
28 )
29 PARALLEL
30 REJECT LIMIT UNLIMITED
31 /
Table created.
SQL> SELECT * FROM my_xml_et
2 /
EMPNO EMPNAME JOB HIREDATE SAL
7369 SMITH CLERK 17-DEC-80 800
7499 ALLEN SALESMAN 20-FEB-81 1600
This is the XML file i used emp.xml
<EMPLOYEES>
<EMP>
<EMPNO>7369</EMPNO>
<ENAME>SMITH</ENAME>
<JOB>CLERK</JOB>
<HIREDATE>17-DEC-80</HIREDATE>
<SAL>800</SAL>
</EMP>
<EMP>
<EMPNO>7499</EMPNO>
<ENAME>ALLEN</ENAME>
<JOB>SALESMAN</JOB>
<HIREDATE>20-FEB-81</HIREDATE>
<SAL>1600</SAL>
<COMM>300</COMM>
</EMP>
</EMPLOYEES>
Use this external table to insert into your table.
Thanks,
Karthick.

How to fetch the relational data from the xml file registered in xdb

Hi,
I have to register the xml file into the xdb repository and i have to fetch the data of the xml file as relational structure through the select statement .
i used the below query to register the xml file in xdb.
DECLARE
v_return BOOLEAN;
BEGIN
v_return := DBMS_XDB.CREATERESOURCE(
abspath => '/public/demo/xml/db_objects.xml',
data => BFILENAME('XML_DIR', 'db_objects.xml')
COMMIT;
END;
Now i have to fetch the values in the xml file as relational data .
whether it is possible ?
can any one help me.
Regards,
suresh.

When you transform your XMLdata to a xmltype you can do something like this for example:
select
extractvalue(value(p),'/XMLRecord/Session_Id') session_id,
extractvalue(value(p),'/XMLRecord/StatementId') StatementId,
extractvalue(value(p),'/XMLRecord/EntryId') EntryId
from
table(xmlsequence(extract(xmltype('
<XMLdemo>
<FormatModifiers><FormatModifier>UTFEncoding</FormatModifier></FormatModifiers>
<XMLRecord>
<Session_Id>117715</Session_Id>
<StatementId>6</StatementId>
<EntryId>1</EntryId>
</XMLRecord>
</XMLdemo>
'),'/XMLdemo/*'))) p
where extractvalue(value(p),'/XMLRecord/Session_Id') is not null;
For this sample I've put a readable XML in plain text and convert it to xmltype so you can run it on your own database.

Application to Read and Write the Configuration Data from a xml file

Hi,
I have to develop a Webdynpro application that will do the following:
Read the Configuration data from an xml file
If stored in a file , and the file is not found, prompt the user to provide the file location.
Pre-Populate the screen(table) with the configuration data
Allow the user to edit the data
Store the configuration data when the user hits the Save button
The config xml file details are as follows:
Regardless of the location of the configuration data, the following fields will be stored
Application (string) will always contain u201CSFA_EDOCSu201D
Key (string) eg LDAP_USER, DB_PREFIX, etc.
Type (character) u201CPu201D = Plain Text, u201CEu201D = Encrypted
Value (string)
Since I am new to WD, I would require help on this.
Please help.Its Urgent.
Regards,
Vaishali.
Edited by: vaishali dhayalan on Sep 19, 2008 8:29 AM

Hi,
I have to develop a Webdynpro application that will do the following:
Read the Configuration data from an xml file
If stored in a file , and the file is not found, prompt the user to provide the file location.
Pre-Populate the screen(table) with the configuration data
Allow the user to edit the data
Store the configuration data when the user hits the Save button
The config xml file details are as follows:
Regardless of the location of the configuration data, the following fields will be stored
Application (string) will always contain u201CSFA_EDOCSu201D
Key (string) eg LDAP_USER, DB_PREFIX, etc.
Type (character) u201CPu201D = Plain Text, u201CEu201D = Encrypted
Value (string)
Since I am new to WD, I would require help on this.
Please help.Its Urgent.
Regards,
Vaishali.
Edited by: vaishali dhayalan on Sep 19, 2008 8:29 AM

Oracle data to generate XML file

How can I extract Oracle data to generate XML file using pl/sql?
I am using the following version
Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
PL/SQL Release 8.1.5.0.0 - Production
CORE Version 8.1.3.0.0 - Production
TNS for Solaris: Version 8.1.5.0.0 - Production
NLSRTL Version 3.4.0.0.0 - Production

I don't know if you already resolved this but here's a sample I got.
-- Akadia Create XML docs
-- (c) Akadia AG 2002
-- Requires Oracle 8i or 9i
-- For larger amounts of nodes use 8.1.7.3 with bug fix 2104071 or 9.2
-- Create XML docs using XMLDOM package.
CONNECT sys/manager@sid
GRANT javauserpriv to scott;
GRANT javasyspriv to scott;
GRANT EXECUTE ON xmldom TO scott;
CREATE SYNONYM scott.xmldom FOR SYS.xmldom;
CONNECT scott/tiger@sid
DECLARE
doc xmldom.DOMDocument;
main_node xmldom.DOMNode;
root_node xmldom.DOMNode;
user_node xmldom.DOMNode;
item_node xmldom.DOMNode;
root_elmt xmldom.DOMElement;
item_elmt xmldom.DOMElement;
item_text xmldom.DOMText;
CURSOR get_users(p_deptno NUMBER) IS
SELECT empno
, ename
, deptno
, rownum
FROM emp
WHERE deptno = p_deptno;
BEGIN
-- get document
doc := xmldom.newDOMDocument;
-- create root element
main_node := xmldom.makeNode(doc);
root_elmt := xmldom.createElement(
doc
, 'EMPSET'
-- xmldom.setAttribute(root_elmt, 'xmlns', 'http://www.akadia.com/xml/soug/xmldom');
-- xmldom.setAttribute(root_elmt, 'xmlns:xsi', 'http://www.w3.org/2001/XMLSchema-instance');
-- xmldom.setAttribute(root_elmt, 'xsi:schemaLocation', 'http://www.akadia.com/xml/soug/xmldom/emp.xsd');
root_node := xmldom.appendChild(
main_node
, xmldom.makeNode(root_elmt)
FOR get_users_rec IN get_users(10) LOOP
-- create user element with rownum as attribute
item_elmt := xmldom.createElement(
doc
, 'EMP'
xmldom.setAttribute(
item_elmt
, 'num'
, get_users_rec.rownum
user_node := xmldom.appendChild(
root_node
, xmldom.makeNode(item_elmt)
-- create user element: EMP_NO
item_elmt := xmldom.createElement(
doc
, 'EMP_NO'
item_node := xmldom.appendChild(
user_node
, xmldom.makeNode(item_elmt)
item_text := xmldom.createTextNode(
doc
, get_users_rec.empno
item_node := xmldom.appendChild(
item_node
, xmldom.makeNode(item_text)
-- create user element: NAME
item_elmt := xmldom.createElement(
doc
, 'NAME'
item_node := xmldom.appendChild(
user_node
, xmldom.makeNode(item_elmt)
item_text := xmldom.createTextNode(
doc
, get_users_rec.ename
item_node := xmldom.appendChild(
item_node
, xmldom.makeNode(item_text)
-- create user element: DEPT_NO
item_elmt := xmldom.createElement(
doc
, 'DEPT_NO');
item_node := xmldom.appendChild(
user_node
, xmldom.makeNode(item_elmt)
item_text := xmldom.createTextNode(
doc
, get_users_rec.deptno
item_node := xmldom.appendChild(
item_node
, xmldom.makeNode(item_text)
END LOOP;
-- write document to file using default character set from database
xmldom.writeToFile(
doc
, '/tmp/xml/docSample.xml'
-- free resources
xmldom.freeDocument(doc);
END;
-- deal with exceptions
EXCEPTION
WHEN xmldom.INDEX_SIZE_ERR THEN
raise_application_error(-20120, 'Index Size error');
WHEN xmldom.DOMSTRING_SIZE_ERR THEN
raise_application_error(-20120, 'String Size error');
WHEN xmldom.HIERARCHY_REQUEST_ERR THEN
raise_application_error(-20120, 'Hierarchy request error');
WHEN xmldom.WRONG_DOCUMENT_ERR THEN
raise_application_error(-20120, 'Wrong doc error');
WHEN xmldom.INVALID_CHARACTER_ERR THEN
raise_application_error(-20120, 'Invalid Char error');
WHEN xmldom.NO_DATA_ALLOWED_ERR THEN
raise_application_error(-20120, 'Nod data allowed error');
WHEN xmldom.NO_MODIFICATION_ALLOWED_ERR THEN
raise_application_error(-20120, 'No mod allowed error');
WHEN xmldom.NOT_FOUND_ERR THEN
raise_application_error(-20120, 'Not found error');
WHEN xmldom.NOT_SUPPORTED_ERR THEN
raise_application_error(-20120, 'Not supported error');
WHEN xmldom.INUSE_ATTRIBUTE_ERR THEN
raise_application_error(-20120, 'In use attr error');
END;
/

Loading data dynamically to XML file

Hi ,
1) in my project i need an xml file that loads data
dynamically,i will get data using HttpService,
How to do this ?Please Help me its urgent.
2)Can i create an xml file that loads data dynamically using
Flex???

Just need to clarify if you mean to load your data FROM an
XML file, which is relatively straightforward, or if you're saying
you want to WRITE an XML file based on something that's happened in
your application and store it on a server somewhere.

Error while export data from a xml file to an relational table

Hi,
I am Creating an ODI Project: Developing an ODI XML to Database Transformation Using Interface with ODI Constraint following this link
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_project_xml-to-table/odi_project_xml-to-table.htm
This project executed successfully with some warning.*Target Table is automatically created in database and also populated with data*.But when I right-click Target Datastore(in Mapping Tab of the Interface), and then select Data to View Data that needs to be inserted in the target table. I get some error like this:-
Execution of Query Failed.
Details:-
See com.borland.dx.dataset.DataSetException error code: BASE+62
com.borland.dx.dataset.DataSetException: Execution of query failed.
     at com.borland.dx.dataset.DataSetException.a(Unknown Source)
     at com.borland.dx.dataset.DataSetException.queryFailed(Unknown Source)
     at com.borland.dx.sql.dataset.QueryProvider.a(Unknown Source)
     at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
     at com.sunopsis.graphical.frame.DwgDataFrame.initialize(DwgDataFrame.java:368)
     at com.sunopsis.graphical.frame.DwgDataFrame.<init>(DwgDataFrame.java:77)
     at oracle.odi.ui.etlmodeler.diag.inspector.pane.popup.DiagramActionDispayDataTarget.actionPerformed(DiagramActionDispayDataTarget.java:91)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1223)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1264)
     at java.awt.Component.processMouseEvent(Component.java:6263)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Chained exception:
java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947)
     at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671)
     at com.borland.dx.sql.dataset.o.f(Unknown Source)
     at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
     at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
     at com.sunopsis.graphical.frame.DwgDataFrame.initialize(DwgDataFrame.java:368)
     at com.sunopsis.graphical.frame.DwgDataFrame.<init>(DwgDataFrame.java:77)
     at oracle.odi.ui.etlmodeler.diag.inspector.pane.popup.DiagramActionDispayDataTarget.actionPerformed(DiagramActionDispayDataTarget.java:91)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1223)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1264)
     at java.awt.Component.processMouseEvent(Component.java:6263)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Please Help

Michael R wrote:
The target table will be created when you execute the interface, if you set the option on the flow tab as instructed in step #6 of the "Setting up ODI Constraint on CLIENT Datastore" Section.
Option     Value
CREATE_TARG_TABLE      trueHi Michel,
This was not my required answer.I am sorry that I was unable to clarify my question.Actually
+This project executed successfully with some warning.Target Table is automatically created in database and also populated with data.But when I right-click Target Datastore(in >Mapping Tab of the Interface), and then select Data to View Data that needs to be inserted in the target table.I get some error like this:-...+This above line is the result of my project my problem is
when I right-click Target Datastore(in Mapping Tab of the Interface), and then select Data to View Data that already inserted in the target table.Is not shown by the view data operation.
I meant to say I am facing this error
At the10(1010 written) step of
Creating a New ODI Interface to Perform XML File to RDBMS Table Transformation
wehre it says
Open the Interface tab. Select Mapping tab, right-click Target Datastore - CLIENT, and then select Data. View Data inserted in the target table. Close Data Editor. Close the tabs...
In my case when I use my sqldeveloper I can see data successfully inserted in my target table and also in error table (data that can't satisfy the constraint) .But I was unable to check this by following the above mentioned 10 th step and got this error.
Thanks

IDOC (Source) to JDA data base(thru XML files)

Similar Messages

Maybe you are looking for