IDoc Status 02 Error passing data to port

Hi Experts,
I wrote a custome program to send customer via HTTP XML port. This program collects customer and send in single IDoc as per specified batch size.eg if batch size is 5 then 5 custome will be send in one IDoc. On devlopment environment it was working fine upto batch size 500. In quality single customer is transfering successfully but while selecting a batch size arround 100 it is displaying error 'Error passing data to port' with status 02.
Please help me to be out of this.
Regards,
Ravinder

status 02 is     Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

Similar Messages

  • Outbound IDOC( Error passing data to port)

    Hi,
    We have an interface running daily configured such that the idocs are converted to files and placed on a directory path.
    All the idocs are processed successfully but for one hour the idocs failed and the error message says:
    Status: Error passing data to port
    Error at OPEN (Directory path) with operating system error msg.:No such file or directory.
    The missed data from the error idocs have been sent via PFAL.
    But again after this one hour the idocs were successfully posted for the same directory path.
    Please let me know what the issue can be here or how can we avoid this.
    Thanks.

    Hi
    *Some times it may happen that IDOC doesnt reach to the port , in case if you are using Transactional RFC port so*
    *you can use the report RSEOUT00  for sending the IDOC to port .*
    *Hope it may help you .*

  • Info IDoc  : sent, not arrived ; Error passing data to port

    Hi Folks,
      While I am loading the data from R/3 I am facing the following error in Production..
    Info IDoc 2 : sent, not arrived ; Error passing data to port
    when I checked in SM59 every thing seems fine like RFC test connection and authorization check
    In BW is check the Source system saying it is Ok.
    Only the thing I found here is in TRFC, it is error when opening RFC Connection.
    but it is different in SM59 saying every thing is ok, as said above..
    Please help me in this regard
    thanks masters
    DJ

    Srinivas,
      Thanks for your prompt reply..
    user : ALEREMOTE  and password are fine..
    As told I check st22 and sm21 in both sytems, no sort dumps I found..
    Please help me its an urgent..
    thanks
    DJ
    Message was edited by:
            Jangareddy dasari

  • Error in Production Load: Error passing data to port

    Hello All,
    I got this unexpected error in production. The Jobs are still processing for a long time(in Yellow status) with the error message :
    Extraction (messages): Missing messages       (Status:Yellow)
         Missing message: Request received      (Status:Yellow)
         Missing message: Number of records sent     (Status:Yellow)
         Missing message: Selection Completed     (Status:Yellow)
    Transfer (IDocs and TRFC): Missing messages or warnings           (Status:Yellow)
         Request IDoc : Application document posted                (Status:Green)
         Info IDoc 2 : sent, not arrived ; Error passing data to port      (Status:Yellow)
         Info IDoc 3 : sent, not arrived ; Error passing data to port      (Status:Yellow)
         Info IDoc 1 : sent, not arrived ; Error passing data to port      (Status:Yellow)
    I went through the below forumn, and asked the basis to look in to it. In the meantime can any one please suggest me any solutions.
    Some problem with IDoc's Settings while loading data

    Hi Ram,
    The problem may be with the connection to the source system you are loading the data from. You can check the connection using the note 140276.
    Best Regards,
    Des.

  • Error passing data to port

    Hello,
    I use extractor 1_CO_PA1100V04.
    I see that data are uploaded. Diagnosis - current process not finished :
    Number of records like that
    15.42:10 (68888 from 0 records)
    Errors in details :
    sent, not arrived; Error passing data to port
    Selected number dores not agree with transferred number
    What is the problem? What is solution for that problem?
    A

    Hi Aleksandrs,
    there must be an error logged somewhere. Please check out the weblog /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks for analyzing the issue.
    regards
    Siggi

  • Idoc error -- ' error passing data to port - status 02'

    Hi All,
          The IDoc gets created with error status 02. The error occured in the
    production system. We have not got this error for the last 7 months since we went live and we have not made any changes either.
          The following is the error message that i get,
    <b>Error at OPEN '/usr/sap/edidata/out/O_20070104_220042 with operating system error msg.: ' (check path name)
    Message no. E0099
    Diagnosis
    An error occurred when an outbound file was opened with 'OPEN DATASET'. The name of the outbound file is:
    /usr/sap/edidata/out/O_20070104_220042with operating system error msg.:No such file or directory
    Procedure
    1. Check whether the directory exists and is linked for the SAP System.
    2. If yes, check whether there is any space in the file system.
    3. If the file already exists, check the authorization and the owner.</b>
    Has it got anything to do with the year beginning ?
    Help me resolve this issue.
    Regards,
    Disney.

    Ravikumar,
        I processed the errored idocs from tcode bd87, it got processed successfully.
    Can you tell me how to check,
    1. If the disk space is full or not.
    2. Authorization for the user.
    Regards,
    Disney.

  • I am triggering My IDOC for XI interface Error passing data to port

    Hi All
    when i checked the partner profile , it is givng the error as this one , and i dont to how to go for this one
    No Message Control entry for this entry

    Hi Sridhar,
    Cross check with this weblog:
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    Sachin

  • BI - Error passing data to port

    Hi,
    We have issues executing an info-package in BIQ200 (BIQ SYSTEM).
    It uses RFC to get the data from ECQ220 (ECQ DEV SYSTEM).
    The data is then written to a PSA file in BIQ200.
    The process should end with a green status indicator. However it is not
    ending and just times out.
    Please note that this functionality worked before doing the Remote
    client copy from productions system ECPCLNT320 to our ECQCLNT220. All
    RFC destination are properly defined. Please note that this
    functionality was working correctly before the remote client copy. 
    Attached are some screen shot. I am not sure if the setting in WE21 for
    the transactional rfc "A000000015" should be changed from "SMXCLNT200"
    to "BIQCLNT200". I noticed that the transcational rfc for "A000000016"
    is BIDCLNT100 and "A000000017" is "BIPCLNT300" as per the attached
    screen shot.

    I checked sm21, st22 and background jobs in BIQ 200 and everything seems looks fine except for 1 job as noted below. This job could be for something ealse  I checked RSM0 --> Monitor Node --> 0ACCOUNT (5/26/2010) ECQCLNT220 (Red Alert: 18082 from 0 Records) . It seems like the data is pulled from ECQCLNT220 but the records just hangs to update in BIQCLNT200. Below is the log for RSMO.
    RSMO LOG
    Errors while sending packages from OLTP to BI
    Diagnosis
    No IDocs could be sent to BI using RFC.
    System Response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
    Further analysis:
    Check the TRFC log.
    You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Error handling:
    If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
    Job log overview for job:    BI_PROCESS_CHAIN / 0400012A
    Date       Time     Message text                                                                                Message class Message no. Message type
    05/26/2010 04:00:13 Job started                                                                                00           516          S
    05/26/2010 04:00:13 Step 001 started (program RSPROCESS, variant &0000000032064, user ID RFC_USER)                         00           550          S
    05/26/2010 04:00:13 Start process CHAIN ZNGK_MASTR_TEXT in run D853A0PTCQ592DBNG11QE7V16 of chain ZNGK_MAST_DATA_LOAD     RSPC          156          S
    05/26/2010 04:00:14 Chain Is OK                                                                                RSPC          028          S
    05/26/2010 04:00:16 Chain ZNGK_MASTR_TEXT was removed from scheduling                                                     RSPC          026          S
    05/26/2010 04:00:16 Chain changed! Scheduling in display mode not possible                                                RSPC          113          I
    05/26/2010 04:00:16 Process did not report an instance -> no log                                                          RSPC          057          E
    05/26/2010 04:00:16 Job cancelled after system exception ERROR_MESSAGE                                                     00           564          A

  • Error on BD87 -Error Passing data to Port

    Hi All,
    I'm facing an issue with ECC Quality system to BI Quality in BD87, In Logical System For Quality client ->IDocs in outbound Processing->RSINFO->E0(266):  Could not find code page. I have done restore and connection test in SM 59, connection is fine, but still issue persists.
    Regards
    #Alex

    Hi,
    Could not find codepage. Seems to look like a language sync issue between the two systems.
    Also unicode and non-unicode settings on the systems need to be checked. Further check the unicode settings on the RFC between the systems.
    Regards,
    Srikishan

  • IDoc_02_Error passing data to port-Communication error when  sending with HTTP

    Hello All,
    We are receiving the error "02_Error passing data to port-Communication error when  sending with HTTP", when sending the idoc to PI from ECC system.
    Observation:
    1. Some idocs are failing and immediately after sometime the same type of  idocs with different idoc numbers are getting successful.
    Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
    2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
    please help me in resolving the issue.
    Regards,
    Ch. Venkat.

    status 02 is     Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
    Thanx and Regards
    Arpan Maheshwari

  • Error handling problem with outbound idoc status 02 and  XML HTTP Port

    I set up an ALE scenario to send master data out of SAP via an XML HTTP port.  All goes well until the idoc receives error 02. 
    It looks like idocs in this error status with the use of an XML HTTP port can not be reprocessed via the standard SAP techniques.  Program RBDAGAIN takes them out of the list for reprocessing (even though the connection is back up and running).
    Is there any solution to still use the standard ALE error handling ?

    Hi Karin,
    Looks like based on note 701597, you can only reprocess these idocs manually via a workitem.  I qouted the relevant text below:
    3. Error handling with status '02':
    An HTTP IDoc in status '02' should not automatically be sent once again.
    Up to now, the RBDAGAIN report was used to resend incorrect IDocs.
    However, this report was adjusted and now deletes all IDocs in status 02
    to be routed to a HTTP port from the list of selected IDocs. IDocs to a
    HTTP port in status '02' should only be sent manually via a work item.
    Regards:
    Rex

  • Idoc status error 37 in sender and 51 in recieving system

    i m new to ale idoc n created 2 clients 910(sender system) and 800(reciever system)
    all connections are well i got status message 03 and 30 and 01 but along with it i m getting one more idoc genersted and status as 37 . idoc no. 50 as 03 30 and 01 and idoc 51 as 37 . in sender system n inreciever system i m not getting idoc.after sumtim i m getting them n error status as 51 .two idocs are generated simultanously.
    does the port name we21 should be same i m using same port name currently .
    clnt910 --rfc800 destination client 800 (sender system).
    clnt800 --rfc800 destination client 910 (reciever system).
    when i m changing the port name i m getting error status as 29 .
    we20 both the partner profile are active

    Hi,
    You Outbound IDOC is not correctly formatted I think, check the segments whether they are correctly added or not.
    Thanks,
    Mahesh.

  • IDOC: Status (Error/Success/information)report to Sender system

    How would one send a message(error/success/information) to the sending(external) system to inform them of the statuses of the messages they've sent to our SAP system?

    Hi Baumann,
    you have an option called Audit reporting in which you can have the status of idoc at sender side.read the following.
    Setting Up Audit Reporting
    In the default behavior, after an IDoc is dispatched to a destination system, the sender does not know the state of the process on the destination system. You can configure the system, however, for cross-system reporting. You must model the ALEAUD message between the systems.
    Two programs enable cross-system reporting.
    1)RBDSTATE. This program is scheduled to run periodically on the destination system. It reports the status of incoming IDocs to the sending system, using the ALEAUD message and ALEAUD01 IDoc. This status information is recorded separately from IDoc status information in the audit logs.
    2)RBDAUD01. This program is executed on the sending system. It analyzes the audit log and displays the output as a report.
    The RBDSTATE program returns the following statuses, from the receiving to the sending system.
    RBDSTATE Is Run on the Receiving System
    Status of IDoc in receiving system     Status reported to sending system via ALEAUD
    53 (Application document posted.)     41 (Application document created in receiving system.)
    51 (Error: Application document not posted.)     Status 39 (IDoc is in the receiving system.) This status is repeated each time RBDSTATE is run, as long as the IDoc remains in status 51.
    68 (Error: No further processing.)     40 (Application document not created in receiving system.)
    reward points if helpful,

  • Idoc status 62 - Passed to application

    Hello All,
    i am processing an inbound idoc purchase order. Got status 62 : Passed to application. But how to process it further to get status 53: Application document posted,
    Thanks
    Ricky

    Ricky,
    status 62 means that your application (the function configured for this IDoc type) started but did not do anything. It just does not work as expected. The application should come to a regular end with Posting and status 53 or 51/52 for failed posting.
    There is no further processing for Status 62 because this status means the application is still processing it.
    You can enter the IDoc number in WE19 test tool, select function module and process in debug mode. This may help you to find out what's wrong.
    Regards,
    Clemens

  • IDoc status error 51 : A company code cannot be determined for LS

    Hi,
    We are trying to post an Idoc into R/3 but getting the IDoc status code 51 :  A company code cannot be determined for LS
    What could be the possible reason?
    Should we use Party in Receiver IDoc scenarios?

    Hi,
    I have quite the same problem. I built an IDOC with WE19 and I have the message "A company code cannot be determined for LI 0000031004".
    As explained in note OSS 117808, the partner number (31004) and partner type (LI) are read from the control record of the IDOC. I enter this values in OBCA and OBCE customizing points, to determine the company code 'LC'. It doesn't work.
    PT Rao, what do you call "activate partner profile" ?
    Thanks in advance.
    Regards,
    Arnaud

Maybe you are looking for

  • How can I download music from my iphone to my new computer?

    My old computer died and I got a new computer and want to download all of my music from my iphonne to my computer.  How do I do this?  I can't figure it out.  Please help!

  • Vista Photo Gallery Keywords & LR Tricksey

    Assuming that LR 1 handles keywords the same way Beta 4.1 (Should I?), then separating two keywords with a forward slant bar in LR makes a "sub keyword" (What's the correct term for that?)in Photo Gallery. while separating them with a comma just adds

  • Receiving Services as Materials in order not to perform goods receipt

    I am on a project that is implementing SRM in May. The company has decided to upload 15 Vendors for Services and to perform the goods receipts in order to achieve a 3 way match. One of the Vendors (Huge Spend) will not get a goods receipt performed a

  • Process not found

    Hi, We occasionaly have been seeing the following message in our logs: ========================================================= 10 Mar 2006 14:47:36,435 ERROR ProcessConfigurationMBeanImpl [ExecuteThread: '3' for queue: 'weblogic.kernel.Default'][]:

  • Explicit Lock on for Update Table

    If I want to perform explicit lock acquiring on updating all records in "customer" table with "state" equals to "CA". What command should I run?