Idoc status 05-Error During Translation

hi ,
we have two failure IDocs with status 05 for ORDERS type message. we did not see any diffrence between the failed Idocs and succesfull . for the same partner we got succesfull Idocs .
can any one throw some light on how to approach ?
regards ,
Prakash.

Hi,
What i feel is that the IDocs didn't translate correctly and were fixed, but no subsequent status records were created to reflect that fact. But you won't know for sure until you talk to
whoever's running your EDI translator. That person can also
tell you what went wrong with those IDocs, which you'll want to
find and fix before you re-process anything.
The problem is in the Mapping tool.. when the mapping tool tried to map the IDOC for EDI . it errored.. and the EDI group should be fixing .. or contacting you if they need something in the IDOC that is missing.
Regards,
nagaraj

Similar Messages

Idoc outbound errors05(error during translation) 07(error during syntax ch)

hi,
        i found all idocs in the system fails with status 07(error during syntax check)
idoc got different stats:
flow of status:01
                      30
                      03
                      18
                      24
                      05 (error during translation)
                      07 (error during syntax check)
                    what could be the problem ?

Hi,
This could be the format which you are sending not matching with other system.
For example, if your are sending the Idocs to EDI, system, the mapping should be correct with the idoc which you have are sending. If haven't changed any posting program logic or idoc segments, then check with other system who is supposed to transmit the idocs.
Regards,
Ashok

Http-Status: 500 Error during conversion of XI message

i am getting this error, Could you please help us in resolving this
http-Status: 500 Error during conversion of XI message
Payload:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during conversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSER">UNEXPECTED_VALUE</SAP:Code><SAP:P1>Main/@versionMajor</SAP:P1><SAP:P2>000</SAP:P2><SAP:P3>003</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>XML tag Main/@versionMajor has incorrect value 000; expected value is 003
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Thnaks, ajay

XML tag Main/@versionMajor has incorrect value 000; expected value is 003
as mentioned above @versionMajor is expecting 003 as the input....if it a DataType in XI then check if there is some restriction imposed on the above attribute.....if you are importing some XSD/wsdl then check if it has some restriction.......if the restriction is not needed then try removing it....so that versionMajor will accept all the values
Regards,
Abhishek.

Regarding idoc status 26 Error

In ABAP(Selection program)
can anyone give the solution for the idoc status code below
26 Error during syntax check of IDoc (outbound)
what could be wrong in the idoc creation
Edited by: vijay on Jan 7, 2008 3:39 PM

hi vijay,
It depends on the type of program.if it is custom written program check with your program logic and compare it with idoc structure.
Reward if it usful,
Thanks,
Srikanth.A

IDOC to FILE-Error during STOR/APPE epilogue

Hi all
I am doing IDOC to File scenario. When trying to save the file in FTP path it throwing error like
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error occurred while connecting to the FTP server java.lang.IllegalStateException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 221 Scanning for virus Transfer complete.

s i can able to connect FTP server from PI server...But it showing some message like
GSSAPI error minor: Unknown code krb5 195
GSSAPI error: initializing context
GSSAPI authentication failed
504 AUTH KERBEROS_V4 not supported.
KERBEROS_V4 rejected as an authentication type
But its getting connected..
Regards
Sathish

IDoc Status 02 error

Hi All,
Whenever we create the PO the outbound IDoc gets triggered but when we see the Idoc status it goes to 02 every time. Then when we manually re trigger the PO the status goes 12 which is ok.
we want that whenver PO is created Idoc should succesfully posted to status 12.
we are using the standard pgm for outbound idoc (RSNASTED).
Let me know how to resolve the issue.
Thnx
AC

Hi,
I have checked in WE20 transactiona and everything is ok as per your input, but still proble persist.
In partner profile in output mode "Transfer Idoc imm has been activated already.
Let me know what are other things i need to check to resolve this issue.
Thnx
AC

Javascript error during translation in portal

hi,
i am transalating objects from english to italian in portal content translation...
but during the implementation i am having javascript errors in portal.
there is no problem in the english version..
Snippet of the english javascript
<title >XYZ</title>
<meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=UTF-8">
<script SRC="/irj/portalapps/com.sap.portal.httpconnectivity.httpauthentication/scripts/CAManagerScript.js" ></script>
<script SRC="/irj/portalapps/com.sap.portal.navigation.helperservice/scripts/HistoryFramework.js" ></script>
<script SRC="/irj/portalapps/com.sap.portal.navigation.helperservice/scripts/NavigationFramework.js" ></script>
<script SRC="/irj/portalapps/com.sap.portal.pagebuilder/scripts/pagesupport.js" ></script>
<link REL=STYLESHEET HREF="/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/customer/BDS/prtl/prtl_ie6.css?6.0.15.0.49" TYPE="text/css" >
<link REL=STYLESHEET HREF="/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/customer/BDS/ur/ur_fc_ie6.css?6.0.15.0.49" TYPE="text/css" >
<script SRC="/irj/portalapps/com.sap.portal.htmlb/jslib/controls_ie5.js" ></script>
<script SRC="/irj/portalapps/com.sap.portal.htmlb/jslib/sapUrMapi_ie6.js" ></script>
<script SRC="/irj/portalapps/com.sap.portal.htmlb/jslib/popup_ie6.js" ></script>
<script SRC="/irj/portalapps/com.sap.portal.htmlb/jslib/languages/urMessageBundle_en.js" ></script>
<script SRC="/irj/portalapps/com.sap.portal.navigation.toplevel/scripts/toplevelnavigation.js" ></script>
</head><body class="prtlBody urFontBaseFam urScrl">


<Script>
var caEngine = new CAManager('/irj/servlet/prt/portal/prtroot/com.sap.portal.httpconnectivity.httpauthentication.Engine','dialogHeight:10;dialogWidth:20;center:1;help:0;status:0');
caEngine.registerCAEvent('com.sap.portal.httpconnectivity.httpauthentication','Teach',caEngine,'eventCallBack');
</Script>
And the corresponding script in italian is
<META http-equiv=Content-Type content="text/html; charset=UTF-8">
<SCRIPT src="Introduzione - Kodak Portal_files/CAManagerScript.js"></SCRIPT>
<SCRIPT src="Introduzione - Kodak Portal_files/HistoryFramework.js"></SCRIPT>
<SCRIPT src="Introduzione - Kodak Portal_files/NavigationFramework.js"></SCRIPT>
<SCRIPT src="Introduzione - Kodak Portal_files/pagesupport.js"></SCRIPT>
<LINK href="Introduzione - Kodak Portal_files/prtl_ie6.css" type=text/css
rel=STYLESHEET><LINK href="Introduzione - Kodak Portal_files/ur_fc_ie6.css"
type=text/css rel=STYLESHEET>
<SCRIPT src="Introduzione - Kodak Portal_files/controls_ie5.js"></SCRIPT>
<SCRIPT src="Introduzione - Kodak Portal_files/sapUrMapi_ie6.js"></SCRIPT>
<SCRIPT src="Introduzione - Kodak Portal_files/popup_ie6.js"></SCRIPT>
<SCRIPT src="Introduzione - Kodak Portal_files/urMessageBundle_it.js"></SCRIPT>
<SCRIPT src="Introduzione - Kodak Portal_files/toplevelnavigation.js"></SCRIPT>
<META content="MSHTML 6.00.2900.2963" name=GENERATOR></HEAD>
<BODY class="prtlBody urFontBaseFam urScrl">
<SCRIPT>
var caEngine = new CAManager('/irj/servlet/prt/portal/prtroot/com.sap.portal.httpconnectivity.httpauthentication.Engine','dialogHeight:10;dialogWidth:20;center:1;help:0;status:0');
caEngine.registerCAEvent('com.sap.portal.httpconnectivity.httpauthentication','Teach',caEngine,'eventCallBack');
</SCRIPT>
seeing the scripts, the difference is that the path in italian is not given..
where do i have to give that??
need help in this regard...

While translation make sure u dont leave a space in the end in the translated text.
I found this error resolved after removing the spaces from the end of the translated text.

IDoc Status 02 Error passing data to port

Hi Experts,
I wrote a custome program to send customer via HTTP XML port. This program collects customer and send in single IDoc as per specified batch size.eg if batch size is 5 then 5 custome will be send in one IDoc. On devlopment environment it was working fine upto batch size 500. In quality single customer is transfering successfully but while selecting a batch size arround 100 it is displaying error 'Error passing data to port' with status 02.
Please help me to be out of this.
Regards,
Ravinder

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

IDoc Status 56 error F21_IDOC_INSERT_WITH_FAIL_STAT

Hi,
I am trying to create an inbound idoc in a particular client and trying to post it in the same client using standard function module.
IDoc type is CREAMAS and Basic Type is CREAMAS04. The function module to process this IDoc is "IDOC_INPUT_CREDITOR".
I am building the data records, control data inside my program and passing it to the function module "IDOC_INBOUND_WRITE_TO_DB". This function module creates an IDoc but it goes in status 56. I could see the error message from Subroutine F21_IDOC_INSERT_WITH_FAIL_STAT in program SAPLEDI1. When i manually process the idoc in we19 data is posted to SAP sucessfully.
Can anyone help me why my idoc is going to status 56 though all the segments are correct?
Thanks
Slasher

Hi Guys,
Thanks for your reply...The issue is solved. I had to define the port setting sender Partner profile.
Hence closing this request.
Thanks
Vasanth

IDOC STATUS 8 error

Hai friends,
We have implemented CRM 2007 in our landscape. The data from 0CRM_SRV_PROCESS_H to 0CRM_PROH got extracted from CRM DEVELOPMENT To BW Development.
But when we try it from CRM Production to BW Production, the error message we get is as follows:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
However in RSA3 of the source system, the data is getting extracted.
We need to resolve this issue by today. kindly help.
Regards,
Neha Solanki

Hai,
I checked in SM37 and got the following log :
Job started
Step 001 started (program SBIE0001, variant &0000000000017, user ID ALERMOTE_BW)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0CRM_SRV_PROCESS_H
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 37230, Duration 00:00:01
IDoc: Start = 06.08.2008 10:07:44, End = 06.08.2008 10:07:45
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 37231, Duration 00:00:00
IDoc: Start = 06.08.2008 10:07:47, End = 06.08.2008 10:07:47
Job finished
This means that the data is not extracted at all.
What do you think ?
Regards,
Neha Solanki

Idoc status 51 error

Hi friends,
When the inbound idoc is processed my user is getting the following error
System error: Error in routine MRM_CHECK_RBKPV -RBKPV-BLART
Message no. M8 607
Procedure
Contact your system administrator.
Can any one help me understand this error. Is it related to any config. Any inputs appreciated.
Thanks in advance
Regards
Genie

Hi Genie
I am not an expert in this matters but I have found following information that should be useful:
In function MRM_INVOICE_VERIFICATION_ERS : (Transaction SE37)
In the User-exit (to change header details)
CALL CUSTOMER-FUNCTION '001'
      EXPORTING
          I_RBKPV              = H_RBKPV
The Header details in H_RBKPV are OVERWRITTEN by E_RBKPV_ERS_CHANGE
(field BLART is included here).
In the coding of your user exit, please add the following line:
    move-corresponding I_RBKPV into E_RBKPV_ERS_CHANGE
Then you can change the header details via E_RBKPV_ERS_CHANGE and this
SHOULD be passed back to the standard R/3 system with BLART still in
tact, UNLESS:
a) The BLART field is already empty in H_RBKPV before the call to
the customer-function, or
b) It is cleared within your user exit (& therefore E_RBKPV_ERS_CHANGE)
Regards
Javier

IDOC status 54

Hello!
IDOC status 54 - Error during formal application check...
Has this status any specific meaning and usage?
In which cases it is recommended by SAP to set it?
Should it always be followed by a record with status 51?
Thanks and best regards,
Vlad

No answer at all...

Idoc in status syntax error check

Hi,
Outbound invoice idoc ended in status 7 (error during syntax check). I check the alloted segment numbers in WE30 and the maximum number alloted segment is not exceeded. Any possible reasons why this scenario is happening?
Thanks for the feedback.

Hi,
Did you check if the segments in the Data Record are in a hierarchial order (ie) Parent segment followed by the Child segments, the Parent segment should alway be mandatory.
I have faced a similar error of this kind and the reason was because of the ordering of the segments.
Thanks
Krithika

What is the Successfull processed IDOC status number?

Hi Experts
What is the Successfull processed IDOC status number?
arjent Please.
Thanks in advance
Sekhar

Hi Chandra,
Below are IDoc Process Codes
For outboud Idocs:
1 IDoc created
2 Error passing data to port
3 Data passed to port OK
4 Error within control information of EDI subsystem
5 Error during translation
6 Translation OK
7 Error during syntax check
8 Syntax check OK
9 Error during interchange handling
10 Interchange handling OK
11 Error during dispatch
12 Dispatch OK
13 Retransmission OK
14 Interchange Acknowledgement positive
15 Interchange Acknowledgement negative
16 Functional Acknowledgement positive
17 Functional Acknowledgement negative
18 Triggering EDI subsystem OK
19 Data transfer for test OK
20 Error triggering EDI subsystem
21 Error passing data for test
22 Dispatch OK, acknowledgement still due
23 Error during retransmission
24 Control information of EDI subsystem OK
25 Processing despite syntax error (outbound)
26 Error during syntax check of IDoc (outbound)
27 Error in dispatch level (ALE service)
28 Not used
29 Error in ALE service
30 IDoc ready for dispatch (ALE service)
31 Error - no further processing
32 IDoc was edited
33 Original of an IDoc which was edited
34 Error in control record of IDoc
35 IDoc reloaded from archive
36 Electronic signature not performed (timeout)
37 IDoc added incorrectly
38 IDoc archived
39 IDoc is in the receiving system (ALE service)
40 Application document not created in receiving system
41 Application document created in receiving system
42 IDoc was created by test transaction
50 IDoc added
For Inound Idocs
51 Error: Application document not posted
52 Application document not fully posted
53 Application document posted
54 Error during formal application check
55 Formal application check OK
56 IDoc with errors added
57 Test IDoc: Error during application check
58 IDoc-Copy from an R/2 connection
59 Not used
60 Error during syntax check of IDoc (inbound)
61 Processing despite syntax error (inbound)
62 IDoc passed to application
63 Error passing IDoc to application
64 IDoc ready to be transferred to application
65 Error in ALE service
66 IDoc is waiting for predecessor IDoc (serialization)
67 Not used
68 Error - no further processing
69 IDoc was edited
70 Original of an IDoc which was edited
71 IDoc reloaded from archive
72 Not used, only R/2
73 IDoc archived
74 IDoc was created by test transaction
Regards,
Satish

Idoc status codes

Hi,
I want to know the meaning of each staus code in Idoc ...
For example...
03 : -Data passed to port OK.
Points will be rewarded.

Hi there,
These are the codes that you are looking for! hope it helps!
Status Description
00    Not used, only R/2
01    IDoc generated
02    Error passing data to port
03    Data passed to port OK
04    Error within control information of EDI subsystem
05    Error during translation
06    Translation OK
07    Error during syntax check
08    Syntax check OK
09    Error during interchange handling
10    Interchange handling OK
11    Error during dispatch
12    Dispatch OK
13    Retransmission OK
14    Interchange Acknowledgement positive
15    Interchange Acknowledgement negative
16    Functional Acknowledgement positive
17    Functional Acknowledgement negative
18    Triggering EDI subsystem OK
19    Data transfer for test OK
20    Error triggering EDI subsystem
21    Error passing data for test
22    Dispatch OK, acknowledgement still due
23    Error during retransmission
24    Control information of EDI subsystem OK
25    Processing despite syntax error (outbound)
26    Error during syntax check of IDoc (outbound)
27    Error in dispatch level (ALE service)
28    Not used
29    Error in ALE service
30    IDoc ready for dispatch (ALE service)
31    Error - no further processing
32    IDoc was edited
33    Original of an IDoc which was edited
34    Error in control record of IDoc
35    IDoc reloaded from archive
36    Electronic signature not performed (timeout)
37    IDoc added incorrectly
38    IDoc archived
39    IDoc is in the target system (ALE service)
40    Application document not created in target system
41    Application document created in target system
42    IDoc was created by test transaction
50    IDoc added
51    Application document not posted
52    Application document not fully posted
53    Application document posted
54    Error during formal application check
55    Formal application check OK
56    IDoc with errors added
57    Test IDoc: Error during application check
58    IDoc copy from R/2 connection
59    Not used
60    Error during syntax check of IDoc (inbound)
61    Processing despite syntax error (inbound)
62    IDoc passed to application
63    Error passing IDoc to application
64    IDoc ready to be transferred to application
65    Error in ALE service
66    IDoc is waiting for predecessor IDoc (serialization)
67    Not used
68    Error - no further processing
69    IDoc was edited
70    Original of an IDoc which was edited
71    IDoc reloaded from archive
72    Not used, only R/2
73    IDoc archived
74    IDoc was created by test transaction
Rewards would be appreciated!

Idoc status 05-Error During Translation

Similar Messages

Maybe you are looking for