IDOC STATUS - 51 " IDOC HAS TEST STATUS"

I am trying to simulate store orders using WVFB transaction. Idoc is getting generated , but with the staus : 51 " IDOC HAS TEST STATUS". In WPER its not showing any erros. Idoc is - ORDERS05.
Pls let me know, from where its getting test flag.

Rajaram Karthigayan 
The IDOC is getting the status 51 saying that an error has occurred assigning the data in the segment.
This segment is a MANDATORY segment.
IDoc status 51 - “Application document not posted”,
Follow these  link
http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a6743507d11d18ee90000e8366fc2/frameset.htm
http://eai.ittoolbox.com/groups/technical-functional/seebeyond-l/idoc-status-51-error-has-occurred-assigning-the-data-in-the-segment-375696
Thanks
Sandeep sharma
PS: if helpful please reward points

Similar Messages

  • One of the IDOCs has an specific error message (status 51 Idoc not posted)

    Dear Experts,
    ple. provide the solution for my issue.
    In my list of compaines one of the company had an external partner(warehouse) who takes care of their products.
    Communication between that external partner software and my system(PVS) is happen through IDOCs.
    But one of the IDOCs has an specific error message ( status 51 and status text : Specification for units and quantites containe error),
    acctually we are receiving picking meterials from the external system to my system.
    I can able to see the Inbound Idoc and status, I am not able to see the Outbound Idoc, then how can I test why its happening this problem and I how can I give the analysis properly please suggest me.
    Thanks in advance
    Suresh

    Suresh,
    Welcome to SDN. Adding to Jürgen Comment, Just double click on status 51 (at node), then in next screen there will be one information (long text) button, just click on it. Some times it will give good details about the error. the information can also suggest direct trasaction to correct the customization, some times!
    try for ur case.
    Reddy

  • Message has error status at outbound side File To Idoc Scenario

    hi ,
    In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
    When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
    Please suggest what may be the problem ?
    Regards,
    Rohit

    1. First check the RFC destination name used in receiver Idoc adapter communication channel.
    2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
    3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
    4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
    Regards,
    Prateek

  • 'Idoc has wrong status'

    Hi SDN,
    Good morning to all of you. I came infrom of you with a small quaery related to IDOC. My query is sales order is going to be created via IDOCs (Which came from XI) through FM IDOC_INPUT_ORDERS. While creating the SO we are generating the mails to users if any errors will be encountered, but here every thing is working fine and some times it is generating mail with the message 'Idoc has wrong status' for successful also. Not for all only for few sucessfull SO's it is generating mail. Please suggest me any configuration i need to check or any thing else. Please suggest me....Appriciate your valuable suggestions......Waiting for your valuable reposnse.....
    Regards,
    Kumar

    Hi Santosh,
    Thanks for your immediate response. It is giving me status 53.
    Regards,
    Kumar

  • Is it possible to copy a status 64 idoc for re-process test?

    Is this possible?
       Thanks.

    Hi TMM,
    the below program are used to re-process the idoc according to their status..
    Program RBDMANI2 for status 51
    Program RBDAPP01 for status 64
    Program RBDAGAIE for status 32 and 69 (Edited IDocs)
    Program RBDSYNER for status 26
    Program RSEOUT00 for status 30
    re-process IDocs failing in 29 status, use program RBDAGAIN.
    Regards,
    Prabhudas

  • Idoc not moved to application and status not updated

    Hi Guys,
    <b>I am facing one issue in our system for message type DESADV (inbound). please  read through </b>
    When an IDoc is pushed in from the external EDI system & even though the inbound Partner Profile is set to immediate processing mode:
    The IDoc stays in status 64 - 'IDoc ready to be transferred to application'. This assumes that the IDoc has not been processed yet
    and still needs to be processed with program RBDAPP01 (or via the “process” button in BD87).
    The issue can not be replicated in ‘test’ mode i.e. using WE19 to copy and process an IDoc, as it has been found that when using WE19 and processing is set to be immediate, the inbound update is fully completed and the IDoc status is set to 53 - Application document posted. 
    The issue occurs when an IDoc is ‘pushed’ into SAP from the external EDI system.  "
    Please help.

    Ramandeep28 wrote:
    But still I am not able to make any call.
    To/within which country?
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Idoc are posting to ECC with Status 64

    Hi All,
    We are receiving IDOC with status 64 from PI.
    We used tried by changing the options in partner profiles
    --> Trigger by Background program
    The inbound IDoc is processed in the background. In this case, make sure, that the report RBDAPP01 is scheduled in the transaction SM37 as a regular job with the correct variant to process all IDoc´s, which have this processing option maintained.
    --> Trigger immediately
    When using this setting, it is important to have sufficient resources for the immediate processing of the inbound IDoc´s. One dialog work process must be available for every single IDoc.
    If this dialog work process is not available, the IDoc cannot be processed and stays in status 64.
    I reffered the notes
    555229 ‘IDocs hang in status 64 for tRFC with immediate processing’
    734576   ‘IDocs retain status 64, but should be processed immediately’
    1055679 ‘IDoc-tRFC inbound with immediate processing may not work’
    Still the idocs are in 64 status, every time im re-processing them manually. even after re-processing some of them are going to 51 or 54.
    Please help me.
    Regards
    Bhargava Krishna

    Hello,
    Can you please explain your issue is with "Trigger by Background program" or "Trigger immediately"?
    For Trigger immediately, if there is no free dialog work process available than IDocs are posted with status 64.
    For Trigger by Background program, Background job RBDAPP01 will process IDocs depending on variant you define to select & process IDocs(i.e., IDoc Status = 64).
    It is always recommended to use "Trigger by Background program" for high volume interface which has large number of IDocs.
    Help on RBDAPP01
    Regards,
    Sameer

  • IDOC Status 50 / Idoc added

    Hello Guru's
    I can only find a description 'Idoc added'. What does IDOC status 50 mean?
    Best regards

    Hi,
    If the inbound idoc is posted successfully, then you will see this kind of sequence.
    50 IDoc added
    64 IDoc ready to be transferred to application
    62 IDoc passed to application
    53 Application document posted
    status codes
    50 IDoc added
    51 Application document not posted
    52 Application document not fully posted
    53 Application document posted
    54 Error during formal application check
    55 Formal application check OK
    56 IDoc with errors added
    57 Test IDoc: Error during application check
    58 IDoc copy from R/2 connection
    59 Not used
    60 Error during syntax check of IDoc (inbound)
    61 Processing despite syntax error (inbound)
    62 IDoc passed to application
    63 Error passing IDoc to application
    64 IDoc ready to be transferred to application
    65 Error in ALE service
    66 IDoc is waiting for predecessor IDoc (serialization)
    67 Not used
    68 Error - no further processing
    69 IDoc was edited
    70 Original of an IDoc which was edited
    71 IDoc reloaded from archive
    72 Not used, only R/2
    73 IDoc archived
    74 IDoc was created by test transaction
    75 IDoc is in inbound queu
    regards
    srinivas

  • Am not getting correct status of IDOC after using MASTER_IDOC_DISTRIBUTE FM

    Hi,
    Am triggering an out bound custom IDOC by using my_custom_FM for sales orders. With in my_custom_FM am calling standard FM 'MASTER_IDOC_DISTRIBUTE' and distributing custom IDOC. If IDOC got failed I have to send an error message to SAP inbox (am achieving this, explicitly by using a standard FM). But, immediately after executing FM MASTER_IDOC_DISTRIBUTE, i checked the IDOC status in 'communication_idoc_control' parameter, its saying '30'(am keep on refreshing EDIDS table and WE05), even though IDOC went well. After am completely coming out from debugging the status has changed to '03' in EDIDS and WE05!
    1) Let me know how to get the correct status of IDOC immediately after executing the FM MASTER_IDOC_DISTRIBUTE (because, in next line am calling my message sending FM based on IDOC status).
    2) Or do i need to place my message sending FM some where else?
    Thank you

    Thank you.
    Unfortunately this is happening in an UPDATE task, still as a trial i tried to use COMMIT WORK, as expected it thwon a dump. Also tried only with DEQUE_ALL, no use.
    Are you sure that I can process the subsequent step/block of code(calling error message sending FM to SAP inbox) based on SY-SUBRC of MASTER_IDOC_DISTRIBUTE FM, not based on the IDOC STATUS?
    Because, just as trial, i have given a junk value(say, XXXXXX) for Message type in IDOC control, just before triggering the MASTER_IDOC_DISTRIBUTE FM.......but, still am getting SY-SUBRC = 0!! with a status of 29. Hence am thinking to do not relay on SY-SUBRC=0, sorry if am wrong
    Should i put my code of (calling error message sending FM) in any user-exit?
    Thank you

  • RBDAPP01 Leaves Status 64 IDOCs

    Hi all,
    RBDAPP01 with parallel processing and the "Wait for End of Processing" flag checked often finishes with Status 64 IDOCs that match the selection criteria.  Re-running RDBAPP01 will often process the remaining IDOCs.  How can I determine why RDBAPP01 does not complete all of the processing of status 64 IDOCs?
    Thanks,
    Steve

    Hi,
    64 - IDoc ready to be passed to application. The IDoc will be passed to the application by program RBDAPP01.
    Although the partner profile is defined and the IDoc has been received, the IDoc cannot be transferred to the application.
    You trigger transmission of the IDoc using report RBDAPP01. To do this, plan a regular job in background processing for this report.
    Check the processing mode for the IDoc in the partner profile:
    Processing mode 1: The system transmits the IDoc immediately after receipt in the application.
    Output mode 3: The system collects received IDocs.
    IDocs are not intended to be transmitted directly to the application.
    Status 64 in the IDoc can normally only occur in conjunction with processing mode 3 and output mode 2
    <b>Reward points</b>
    Regards

  • Status 56 -  IDOC with errors added

    Hi everyone,
            I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 -  IDOC with errors added "<b>EDI: Partner Profile not available</b>".
            but i had already created Partner profile in WE20.
    Regards,
    Varun Reddy.K

    Hi Varun,
                   The below link will help u in solving u r problem
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
    Just try follow the steps followed in above mentioned link
    And also check u r RFC connection in TC "SM59".
    Reward with ponits if helpful
    Regards
    Sai Ganesh

  • How to change the status of IDOCS from 29 status to 53

    Guys
    how to change the status of IDOCS from 29 status to 53
    Thanks in advance

    Hi Krishna
    IDOC_STATUS_CONVERT Use this FM and reward me

  • Get the current status of IDOC

    Hi,
    I want the current status of IDOC.
    Is there any function module through which i can get the current status of IDOC?

    Hi,
    Use function module "FTR_IDOC_READ", Output structure "PE_IDOC_STATUS" holds the current status of IDOC number
    Regards
    Vinod

  • Status for idoc to edit and reprocess it

    Hi ,
    I have a senario in which i need to hold the idocs for invoice coming as inbound in SAP .
    Then once the PO is created editing the Invoice idocs to add PO by editing the IDOC and reprocess the same idoc and post invoice corresponding to PO in SAP and then change the status of that idoc to 53.
    Can someone help me,with the status that i need to set to only have the idocs in SAP  .
    And then use those idocs to edit anf add PO and save it for status 32 (idoc edited).
    And run some standard program to change the status to 53 with invoice created.
    Thanks,
    Richa

    Richa,
    You can set the idoc status to '51' in the customer exit of inbound idoc processing function module . Check the TABLES/CHANGING/EXPORT parameter of FM for something like EX_PROTT .. here you can pass the error message after checking the PO number ..
    I'm not sure how are you linking Accounting document to PO.. you can use your logic to update the PO/set the idoc in error status in customer exit .
    -Tushar Shukla

  • IDoc Status "& & & &" in IDoc posting in BD87 - ALE

    hi,
    I am integrating two R3 servers and posting the datas from HR to cProjects server.
    In Outbound I can send the IDocs and In Inbound IDocs are getting into destinations (cProjects) servers along with status "& & & &" in BD87.
    Can anyone help me to know..Where the cause of problem..
    Thanks in advance
    Regards,
    Srinivasan.R

    Hi.,
    In we02 its OK..
    Its showing ...
    Status Message for Selected IDoc                                                               
    Status Text:   IDoc: 0000000000036306 Status: IDoc ready to be transferred to application       
    T100 Text:     No filters , No conversion , No version change .                                 
    But., in place of BD87 I am getting status only "& &, &, &".
    Regards,
    Srinivasan.R

Maybe you are looking for