IDOC status 53 for HRMD_07 but no data uploaded

Hi,
We are trying to load the HR  reocrd from etl to R/3.
I have created an iDoc through WE19 for message type hrmd_a and basic type hrmd_a07.
Populated infotypes for 0000, 0001, 0002 and 0105.
idoc created with status 53 (green light) 'Application documention posted' and information note 'HR: ALE inbound processing for HR master data'.
HOWEVER, when I go to transaction PA30 or tsbles the personnel record is not being created in R/3.
Please kindly help on this. THANK YOU SO MUCH!
Its really urgent

Hi Rajan,
I am also facing the same problem. Did you got any solution. Please let me know.
Regards
Praveen

Similar Messages

  • Data load from infoprovider : status is green, but no data is loaded.

    Hi,
    I have created a new application copying the planning application (which was again a copy from the apshell application set). I modified the dimensions, after which I wanted to load data from a BW infoprovider using the datamanager.
    The first thing I noticed in the datamanager, was that the packages were not the same as in the original planning application. In fact I had chosen to copy all objects to the new application. For example, the package 'load data from infoprovider' that was contained in the data management map of the planning application, was not visible anymore in my new application. Instead, there is a package 'Loadinfoprovider' located in the system administrative map. As these packages are exactly the same, the package 'Loadinfoprovider' does not seem to work properly. When you run the package, it says that is has submitted records to your application, but when you run a report on it, or go look to the bpc infocube in BW, no data is visible.
    Does anyone know what may cause this problem ?
    Edited by: Wouter Vanhoutte on Dec 1, 2009 3:46 PM

    Hi Wouter,
    Did you check your transformation file?
    I had the same problem once, my mistake was that I didn't add a line for my key figure amount (AMOUNT=ZAMOUNT). So the status is green but no data transferred because no key figure to transform.
    I hope this will help you
    Mathieu

  • LSMW : Idoc method , Business Activities custom fields data upload

    Hi guys
    I am uploading Business activities using LSMW IDOC method and below message and idoc type
    Message type CRMXIF_ORDER_SAVE_M
    Basic idoc type : CRMXIF_ORDER_SAVE_M02
    Using EEWB I added few fields to business activities , along with the standard fields I want to upload the customer fields also .
    I tried to Extend the Basic idoc type CRMXIF_ORDER_SAVE_M02, but it was not allowing me to Extend ( since it is generated basic idoc type ) I tried the other Basic idoc types for Business activities , I got the same problem
    the basic idoc type contains only two Segments
    E101CRMXIF_CUSTOMER_H_X (parent)
    E101CRMXIF_CUSTOMER_H (child)
    with out my custom fields
    pls help how can i add my custom fields ( added by eewb) to the basic idoc type
    for uploading custom fields
    thanks in advance
    Warm regards
    Rajasekhar

    You are going to need to create an enhancement of the standard IDOC type in order to get your custom fields to show.  I can't remember the exact procedure, but you will need to create a Z-type based on the existing type in the system.  When you generate the z-type the fields will be filled in.
    Look at the following thread and it will give the basic steps
    How to delete Extention
    Good luck,
    Stephen

  • IDOC status at 30, but in we05 it is 03

    Hello Gurus!!
    My program generates an IDOC and as soon as the idoc is generated it the status is 03 then i have todo something else.
    Within the program when i am cheking the status is 30 but actually in transaction we05 the status is 03.
    I have cheked the partner profiles and transfer_idocs_immeadiately has already been selected.
    I have already gone thru the forum but no valid solution was given,
    There is no need to change any ALE configurations / port configurations because everything just work fine. It is only that within the program i am not able to catch the status 03. the proram is not waiting untill the idoc status is 03. it is capturing only the status 30.
    Is there any thing that i can do within the program? should i capture the idoc number and then check the idoc status from EDID4?
    Please answer o this questions ASAP.
    Regards.

    Initially when you create the outbound idocs then status is 30. then you have to run the program RSEOUT00 to process the idoc then after the processing the status changes to 03.
    But the Program RSEOUT00 is optional. In the partner profile (WE20) If you select the option  'Collect Idocs', then you have to schedule the program RSEOUT00 to process the Idocs otherwise if you have choose the option 'Transfer idoc immediately', you don't need to do anything.
    Thanks,
    Srinivas

  • IDOC status on 03 but not recieved on target system

    Hi,
    We are recieving inbound idoc from external system and processing Inbound IDOC on SAP system, after processing inbound idoc on SAP we are sending status outbound idoc to external system.
    The above functionality was working fine before upgradation.
    after upgradation we have recreated RFC (TCP/IP) connection, updated at port level and also configured the new SAP system details ( sid, Hostname, service programsname...) on external system correctly.
    Now we are recieving inbound idoc from external system on upgraded system,after processing inbound idoc details on SAP system, generating outbound idoc from SAP and it reaching the outbound prot sucessfully on 03 status with green light.
    But external system is not recieving the IDOC. How to find why idoc is not reaching external system even though it is sucessfully passed at outbound port level with green light status 03.
    We have also checked the SM58 for TRFC entries but we didn't identified any entries on SM58. Please help us on this issue
    Thanks,
    Raju

    Hi Raju,
    As  mentioned by The specified item was not found., the one common problem for the IDocs not being sent might be a missing COMMIT WORK. I.e. when using the standard SAP API's for sending outbound IDocs, SAP actually creates the IDoc and registers an update function for sending the IDoc out. So without the COMMIT WORK, the IDoc usually exists on the database (implicit or database commmits), is in status 03, but hasn't been sent out and cannot be found in the outbound RFC queue (because SAP never tried to send it).
    If you're convinced that a COMMIT WORK is happening (and after trying to send the outbound IDoc) then I'd try the following: Replace the used RFC destination (or re-define it temporarily) with one that points to the same system from where you're sending. If you don't see the IDocs as inbound IDocs or in the outbound RFC queue, the sending never happens. (Ok, might be a moot point if you completely trust your external system, but usually it's good to even rule out the most unlikely causes - if it's simple.)
    So if this didn't help, maybe you can provide some further insight into how you're creating/sending the outbound IDocs. This could help us in trying to get some answer, but for a starter the COMMIT WORK mentioned by The specified item was not found. is in my opinion the best candidate.
    Cheers, harald
    p.s.: Even if you're using ALE, I don't think it could be due to anything in your distribution model as mentioned by The specified item was not found.. If you wouldn't have setup the distribution model, the SAP API's should create a master IDoc in memory and then no communication IDocs (since there's no recipients or due to filtering) and thus there should be no outbound IDocs on the database.

  • Request status is Green,But no data is loaded into infocube.

    Hi,
    I have loaded the data from Flat File to Infocube. The status of the request is Green. But no records are added into infocube.
    The data is available in PSA.

    Hi Jen,
    I had created DTP and scheduled it. There shows a request in infocube with status green but no records added.
    I have checked in PSA , the data is present in PSA.
    I am wondering why data is not uploaded from PSA to Infocube.

  • IDOC HRMD_A for Infotype 0002 (Personal Data)

    Hello,
    I'm trying to send the modifications that I make in a person in the transaction PA30 in the table PA0002 automaticly. But when I go to thew program "RBDMIDOC" and select the message type "HRMD_A" (HR: Plan data and HR master data) it says that it doesn't have anything to send. But when I modify a Object (o, c, s), and I execute the program it send information. The object(o,c,s) has sent correctly. But when I want to send the Personal Data (P), it doesn't send anything. I have the trigger activated.
    Have I selected the message type correctly?
    PM

    updating id for malasian employee is not working.
    Q0002-perid. it come only for malasian employee.
    screen no 2044
    Use transaction PA30,
    Enter infotype number 2 or select Personal Data (0002) on the Personal Data tab
    You can use any Malaysian employee #
    Click on change button
    Enter in an ID number.  (There is no validation on ID number field.)
    Click either the enter or save button.  The ID number disappears and a message says ‘No change found’.

  • Itunes Syncs and links to Nike Plus, but no data upload?

    I connect to itunes, it never asked me for my nike plus credentials, but then it stated it was syncing to nike plus, asked if I wanted to visit, i followed, when i logged in... nothing. Tried 4 times, all new work outs. none show up.
    Ideas?

    Hey there,
    Have you had a chance to check out this Apple support document relating to this issue? If not, check it out. Hope it helps.
    [Nike + iPod: Troubleshooting issues with uploading workout history to nikeplus.com|http://support.apple.com/kb/HT1632]
    B-rock

  • Field Status for cost center master data!

    Hi friends,
    can anyone please tell me,
    Where do we define, which field is mandatory in cost center master data
    regards

    Good afternoon Rohan,
    To do that :
    IMG or transaction KM1V.
    Create a variante with attributes.
    You can also define time based fields in transaction OKEG
    Valérie
    Message was edited by: valerie secondy

  • Tutorial for new Data Upload feature in 4.1?

    Greetings,
    Is there a tutorial available for using the new Data Upload feature in 4.1? We have not upgraded to 4.1 yet and I would like to try out the new feature on my APEX test workspace, so I can use the new feature once we are upgraded to 4.1.
    Thanks,
    John

    I installed the Product Portal Sample Database and went to page 21. Very nice looking. Is there any tutorial for this Sample application? In other words, is there a tutorial that uses this application as its basis?
    What I am really looking for (my apologies if I have not been clear) is a tutorial that steps you through the process of setting up the new feature of Data Upload in APEX 4.1. I would like to create a new application on my test workspace and learn how to set up the Data Upload page.
    Seeing the Data Load in action is very helpful though. Thanks for pointing me to this.
    Thanks,
    John

  • Xls. sheet for Master data upload

    Hi Can any body suggest me or send me the sample, how to maintain xls. sheet Template of  particular fields for Infotypes 0,1,2,7,8 etc for the purpose of data upload.
    <removed by Moderator>
    thanks
    S Mishra

    Hi Mishra,
    You can look into the Standard Business Blueprint Templates - Data Transfer Tool of SAP....and get an idea...
    Check this Note 1060029 - SAP Best Practices for HCM US - Variants, Misc, LSMW ...
    You will find files for infotypes and you can set up your templates based on these....
    Other way is to
    Go to SE11 >> Enter the Infotype Number PNNNN (with NNNN being the Infotype)...
    It presents you with the structure.......Copy that structure and you can create your excel sheet with that template....
    Good Luck !!!!
    Kumarpal Jain.

  • IDOC Status 68 & 51

    Hi,
    There is an IDOC with status 68 (Error - no further processing) , Earlier it was in status 51 with the status text  "INVALID DATE' .
    How to find out for which particular date field's  the error is being thrown..?? what is the approach to find out the root cause of the issue.?? the IDOC is being sent to R3 through XI.
    Plz give suggestions on how to tackle the issue.
    Thanks in advance,
    Jai

    Hi ,
    The idoc Status for 59 and 51 for indound idoc is....
    68    Error - no further processing                            
    51    Application document not posted     
    the possible solution is checkthe Partner profile for the Idoc and Port number..
    and go to T_code we20 and check the Partner.and check the Syntax in the application tool bar...
    then you will come to know the problem..
    Regards,
    Prabhudas

  • Cannot extract user statuses for Opportunity items

    Hi,
    Standard SAP Extractor does not extract User statuses for the Opportunity Items, Data Source name 0CRM_OPPT_I for 0CRM_C04 icube.
    According the OSS note We have to prepare our own enhancement of the extract structure to include the mapping of the user status group.
    We extended the related structure. There is no problem with this. We need a code sample for mapping of added field to extract structure.
    There is a BAdI for this purpose : CRM_CSDR_BWA_MFLOW
    I need to insert some ABAP code in this implementation.
    Does anybody can give some code sample for this.
    thanks,
    Yigit

    You can also configure the user status for Opportunity Item also. If you want to enhance the dataSource, here is the sample for BAdI:
    method if_ex_crm_bwa_mflow~enhance_data_source .
      data: it_extract type table of CRMT_BW_OPPT_I,
            wa_extract like line of it_extract.
      case i_datasource.
        when '0CRM_OPPT_I'.
          it_extract = ct_data[].
          refresh ct_data.
          loop at it_extract into wa_extract.
    Implement your logic here*****
    All the statuses stores in CRM_JEST table*****
            modify it_extract from wa_extract.
          endloop.
         ct_data[] = it_extract.
        when others.
      endcase.
    endmethod.

  • Idoc status green but data not posted correctly to destination system.

    Hi,
    Can anyone help me out with idoc problem that I am facing.
    The problem has come out with outbound idoc.
    The status of the idoc is green when it has been sent but the objects that has been sent with that idoc are not getting posted in the destination system.Some of them are posted correctly but some of them are not.
    What may be the reason behind this.
    Regards,
    Rachana.

    Good morning
    What was the resolution here? We are siitng with the same problem, but IDoc's are correct, but data packet not processed.
    Thanks, have  a nice day
    Cj

  • I have an I-Phone 3G and when I uploaded my company's app to my phone, thee app added but the data didn't. Is there something I'm doing wrong? Thanks in advance for your assistance.

    I have an I-Phone 3G and when I uploaded my company's app to my phone, thee app added but the data didn't. Is there something I'm doing wrong? Thanks in advance for your assistance.

    Thank you. Here's the strange part, it did work at one time but when the last IOS upgrade occured, that's when the issue started.

Maybe you are looking for