Idoc status green but data not posted correctly to destination system.

Hi,
Can anyone help me out with idoc problem that I am facing.
The problem has come out with outbound idoc.
The status of the idoc is green when it has been sent but the objects that has been sent with that idoc are not getting posted in the destination system.Some of them are posted correctly but some of them are not.
What may be the reason behind this.
Regards,
Rachana.

Good morning
What was the resolution here? We are siitng with the same problem, but IDoc's are correct, but data packet not processed.
Thanks, have  a nice day
Cj

Similar Messages

  • Problem in Background Job. Job Completed Successfully but data not Posted

    Hi All,
    There is a problem in Background Job in Production server (600).
    The job completed successfully but data not posted.
    The same Job was working perfectly till the starting of the May month.
    but now it is not working and rebate has not been posted.
    Where to check and what to check
    Pls suggest.
    Regards,
    P Kamal

    Hi ,
    Please first check the status of the Job , ifs successfully completed then debug it (tcode JDBG) and 
    check out,  whether the values passed (might be using Import-export ,set-get parameter Ids) to the Job are getting passed properly or not. These values might not be getting passed properly.
    If it has some error in Job Log then let me know the error.
    Regards,
    Uma

  • File to IDOC- Status 51:Application document not posted

    Hi Experts,
    I'm doing a File to IDOC scenario. The Idoc is getting added and then it is trying to post it to the application but i get the error saying that "Fill all required fields SAPMF02D 0111 ADDR1_DATA-COUNTRY".
    The idoc type i'm using here is debmas06. The source file doesn't provide all the data and the idoc type doesn't really contain the field addr1_data in it. What is wrong?
    Plese help.
    Thanks ,
    Merrilly

    Hi
    For Idoc type debmas06 there are few mandatory fields such as ADDR1_DATA-COUNTRY.
    Check if the ADDR1_data is segment in IDOC not field.
    While passing the data from file to xi to IDOC these mandatory fields are not filled up.
    Probably you need to identify these fields and have to pass the default values if incase the inputs are not in file.
    In We30/we31 you can check with the segment editor for the mandatory status of the fields.
    Thanks
    Swarup

  • BDOC status completely processed: data not getting updated

    Hi Experts
       I'm  downloading BP data from R/3 system to CRM system , data is successfully getting into the CRM system when checking the SMW01 it was showing the status fully processed (status green) ,but data is not getting updated in tables.
    Please let us know what could be the possible reason
    Thanks & regards
    Rajasekhar

    1) First check the data in the BDOC. Check if the partners are really cmoing.
    2) Check if there are any dumps created in ST22. If yes Pls analyze them.
    3) Check the flow defintion for bdoc type BUPA_MAIN. You can check this in SMW01. Check if the actual call to upload the data and  create BP is done.

  • IDOC is created with status 51( application document not posted)

    Hi experts
    iam working on File-IDOC scenario, when i test the process the XML message is created with no errors and
    but the IDOC is created with status 51( application document not posted)
    the details error shows:
    An error occurred in CALL TRANSACTION USING or CALL DIALOG USING
    during a synchronous update.
    The error was caused by the transaction VA01.
    previously i used same test data that time it was working fine,
    please tell me how can i fix the issue.
    regards
    vasavi

    Key in your Idoc number in BD87, execute
    select the error message and then follow the menu path :
    EDIT --> restrict and process  (Select)
    In the next screen UNCHECK the Bkgd Processing and execute
    Now EDIT --> Process --> foreground from error or in foreground mode.
    This will lead you the screen where it errored out.
    Thx
    PSR

  • Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air

    Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air.  Date on Windows 8.1 is correct.  Thank you.

    Try doing  a reset on your phone. Sounds like your carrier's time set is not getting through to your device. If the reset doesn't do it, then go to Settings>General>Reset>Reset Network Settings. That should do it.

  • Blog pages not posting correctly... spacing and placement issues... WHY!

    So I've just started using iWeb to post photo blogs about my adventures in snowboarding.... The home page turned out great... BUT the individual blog posts are not posting correctly at all.....I add my entries like so....
    text,text,text,text.vffdfdfdsfffvbfss
    then an image here
    more text,text,text,klhkjhkhklhlh
    next image here
    more text,text,text
    another image here
    So after I get it all done and post it the text and image placement comes out very different from how I entered it... Sometimes the image is over the text.....
    I have to go back and move my images around and add massive amounts of spacing to get it to seem somewhat normal... it's not coming out how I want it... WHY is iWeb doing this....
    Here's the URL to my Blog.... http://web.me.com/tylerbrawley/TylerBrawleys_Blog/Splitboarding_the_Wasatch/Entries/2009/3/27_Mill_D%2C_Short_Swing3-27-09.html This published page looks nothing like what it is in iWeb...
    Here's the same Blog published to a web site forum... http://splitboard.com/talk/viewtopic.php?f=5&t=6633
    I wish I could get iWeb to publish just like that... Can anyone help?
    Thanks in advance!

    Really? No one can help?

  • Idocs statsu 51 Application document not posted

    Hi All,
    We are having an issue with orders having large number of line items in which Shipping confirmation Idocs coming from warehouse are going to status 51 (Application document not posted) when we look at the status record it shows "Object requested is currently locked by user" . This issue started happening after the ECC 6.0 upgrade.
    Please advice for the same.
    Thanks

    Dear Abid,
    Did you try to search the Forum? There are lots of threads regarding this..... Please use the search option of the forum and you will get lots of material which may further enhance your knowledge.
    Check this thread....
    Object requested is currently locked
    Thanks,
    Raja

  • I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

    I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

    The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\&gt;\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&amp;lt;x2settings&amp;gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.  

  • √using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

    using sucessfully airport express for internet
    when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
    wanting to use extreme at base and express in another part of the house

    How is the express getting internet? What modem is it plugged into?
    How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
    IPv6 is also needed.. turn on local link.

  • My power cord lights up green, but is not charging my macbook pro. Any idea what I should do?

    I have a MacBook Pro, about 2 years old.  When I plug in the power cord, it glowa green but is not charging the computer.  Any ideas?

    Reset the SMC:
    http://support.apple.com/kb/HT3964
    If that doesn't get it charging again, see this article:
    http://support.apple.com/kb/TS1713
    If you have access to another AC adapter, see whether that one works better.

  • Error - Delivery date not set. Notify your system administrator - TcodeKKS1

    Hi,
    While using Tcode - KKS1  we are getting the Error - "Delivery date not set. Notify your system administrator"  for two Production orders.  I have checked all the date fields in Production order. What could be the reason for this.
    Timely help will be highly appreciated.
    Thanks is advance
    Narayanan

    Hi,
    check SAPNET note 83914 and related notes.
    best regards, Christian

  • Idoc Status 53 but Applicaton document not posted message type PORDCR

    Hi,
    Need your help. I am using message type PORDCR and Basic type PORDCR04 to create Purchase order through inbound Idocs. I am getting correct status '53' Application document posted along with the new Purchase order number. When I am trying to see it in EKKO / or ME23N  I could not see this purchase order.
    Can anyone please let me know what could be the possible reason for document is not getting posted in in database but Idoc status is correct.?
    Thanks in advance.
    Regards,
    Deepak

    check SM13 and ST22 to see if there are any errors there

  • IDOC status 53 but no document is posted

    All,
    I am sure this would be answered earlier but not able to find the thread.
    Can somebody please let me know, when I process the IDOC using WE16, I get status 53 but dont find document as posted.
    Thanks
    Sameer

    Hi,
    Check the config stuff if you are usng the right IDoc...See partner profiles and the message types.
    thanks

  • Bdoc received but data not updated

    Hello,
    I am using CRM4.0
    I changed the customizing in table CRMC_ACT_DECOM to change values of field KV_DEKO.
    Then, I transported the modification usign R3AS4 to CDB.
    I can see that the table CDBC_ACT_JOURN is updated correctly with the new values.
    My problem is that I don't see the modification on MSA. When I try a select on this table, i just see the old values.
    It tried to do an extract on replication object CRM_DNL_ADOCCH for my site, the bdoc is well sent and I can see the new data in it, but even after synchronisation, the data in MSA is not updated...
    What am I missing ?
    (the strange thing is that I didn't have this issue in dev environnement)
    Thanks in advance,
    EDIT : ok when I launch this query in query analyser :
    SELECT *
    FROM dbo.CDBC_ACT_JOURN
    WHERE FIELDNAME = 'KV_DEKO'
    I get all the data.
    But when I am using the query in SQL Server entrerprise management, I don't see them !!
    Edited by: Louis-Arnaud Bouquin on Nov 10, 2009 10:26 AM

    >
    sujith golla wrote:
    > Status of the IDOC is "53", so successfully posted
    > records that have the status can NOT be reprocessed using BD87
    There are some tricks: you can either create a copy of the IDoc in WE19 and then process it or use report RC1_IDOC_SET_STATUS (be careful though) to update the IDoc status.
    However, you might want to do some more research and use suggestions above before resorting to these measures.

Maybe you are looking for

  • Photoshop cc not recognizing wacom tablet pressure

    So when I go into the "Brush" window on the tab "Shape Dynamics there is a caution triangle and upon hovering my mouse over it it reads "Control by pen pressure requires the use of a pressure sensitive tablet" It's even more weird considering I can (

  • HH5 (Type A) - Drop-out issues now resolved? Still...

    I have had a quick read about the forums - nothing conclusive on this one and as BT told us time and time again there wasn't a fault with the HH5 I don't suppose there will be an official post confirming a fix :-) So, I had an HH3 with external VDSL

  • Can I send a outside file as an attachment in SAP

    Hi Pals I have a requirement like, I have to print a script and I need to send that converting into PDF and send mail to the customer, at the same time I need to send the one more file which contains bank details, which will be stored on presentation

  • Attribute Change Run taking very Long time.

    Hi Experts: We are daily loading Master data from one common process chain. There are 33 Infoobjects which are getting activated in Attribute Change Run Process. This process is taking almost 3 hours to run daily; due to this it is impacting our othe

  • Where did my Application go?

    If you are reading this, THANK YOU! I have iPhoto version 2 and no matter how many photos I upload from my camera or albums I create, all the photos mysteriously move to the photo file, found in viewer window. That said, each time I try to open the i