IDOC Status, Tracking in SAP PI/PO Single Stack

Hi All,
My PO version: 7.4, SP4. I am not sure my questions below are still a limitation in current PI/PO single stack systems, and hence requesting your help for the same.
1) Is there a way we can track outbound idocs in SAP PI/PO single stack similar to PI abap stack IDX5? ( Note:- I couldn't find any option in IDOC monitoring in single stack SAP PO 7.4, SP4)
2) IDOC status is always 0 in SAP PO 7.4 single stack IDOC monitoring. I am not sure if this status is just specific to my PO system. Any setting needs to be applied?
ps: Please post only relevant answers/solutions
Thanks,
Praveen Gujjeti
Message was edited by: Praveen Gujjeti

Hi All,
As per SAP help: Comparison of IDoc Adapter (IE) and IDoc Adapter (AAE) - SAP NetWeaver PI Reference Documentation - SAP Library idoc status and tracking not supported in current PO versions. May be SAP will add this feature in upcoming PO versions
Auditing, Monitoring ,and Tracing Functions
Attribute/Feature
IDoc Adapter (IE)
IDoc Adapter (AAE)
ALE Audit
Supported
Supported
IDoc tracing
Supported (transaction IDX5)
Not supported
IDoc monitoring
Transaction IDX5
Integration with channel monitor and message monitor (as part of Advanced Adapter Engine monitor)
Status tracking -SYSTAT
(analysis and further processing of messages that have not been processed)
Not supported
Not supported
RFC monitoring
Supported
Not supported
Message persistence in the IDoc adapter
Supported
Message correlation information can be stored in IDoc adapter.
Not supported.
Message is persisted in messaging system with correlation data persisted in adapter.
Regards,
Praveen Gujjeti

Similar Messages

Idoc Acknowledgements in SAP PI7.31 Single stack

Hello All,
We are migrating from SAP PI 7.0 to SAP PI7.31 single stack.
in Existing landscape(SAP PI7.0) - sender system ECC is receiving the acknowledgements(ALEAUD) for the idocs sent to PI system where in the port is different i.e. port is receiving back with different Partner Number.
But in SAP PI7.31 single stack, ECC is recieving the acknowledgmenets(ALEAUD) as same as the sender partner number of the idoc sent to PI 7.31 system.
can someone please explain me if it is possible to implement the same functionality as per SAP PI7.0 in SAP PI7.31 single stack as well or is this the Limitation of the product.
Thanks
VR

Hello Experts,
Can someone please suggest me if SAP PI7.31 Single stack can send ALEAUD with different partner number to ECC.
Thank you
VR

Unable to see Payload in SAP PI7.31 Single stack

Hello Experts,
We have a scenario of Mail as sender and ECC as reciever using Proxy. We are using SAP PI7.31 single stack.
Here we are reading the file from mail attachment which is in CSV format and sending the data to ECC successfully.
But while to check the payload in Message Monitor, while click on the "Mailattachement-1.csv" it is opening with "No Message Selected".
Can someone please let me know how can I check the payload of the attachement.
Thanks
VR

Hi VR
Check this parameter:
NWA -> Configuration -> Infrastructure -> Java System Properties -> Services -> XPI Service: Messaging System, set property messaging.SyncMessageRemover.removeBody = false
Check also the general parameters for tracing and logging
Saving Message Versions in the AAE (Local Message Processing) - Advanced Adapter Engine - SAP Library
Regards
Javi

Idoc status 03 in SAP but in XI idoc not showing

Hi Experts,
in my SAP to file scenario, idoc is created successfully with status 03, but idoc is not coming to PI.
It is not happening always. some times, idocs are missing. But not able to find any error in PI.
Please guide me how to get the missed idoc.
Thanks,
Swapnashree

this is old interface and it only gave issue this time. In ECC side, when I checked, out of 4 idocs one idoc is with 03 status and other three were with 39 status.
But all in green status. No error.
RFC destination and all are correct.
Actually I am not able to see the complete error text in TRFC . that message class is not maintained. Our functional team informed that they added XX text and re import idoc and it worked. Please suggest.

How to process Idoc status file within Sap?

Hi All,
We would like to process received status file to update the sent IDOC's. Our current setup is that we send/push the Outbound Idoc to external EDI sub system and pull the status file for processed Idoc from external EDI system to our R/3 server.
Sap Documentation explains the scenario, where this process is triggered from external system using startrfc program, whereas our scenario is to trigger the status update process, once the file is pulled to our system from unix using edi_status_incoming function module.
Your anwers are much appreciated.
Kind Regards,
Sandhya

Hi Sandhya,
Once the Idocs are sent to the EDI Subsystem, the SAP will have the status that the Idoc has reached the partner sub system. I hope, the workflow should be able to trigger back the status file to the SAP System after the Idoc is processed at the EDI Subsystem.
Please check with the workflow that is attached.
Else, if this is using the FM or Message Control, then check the configuration under MN04.
I'm also trying to find the solution for the same.
Regards,
-Syed.

How to track the Inbound child IDOcs in PI 7.4 Single stack

Hi Friends,
I would like to know the procedure of tracking the Inbound child IDocs in PI 7.4 Single stack.
Here is the detailed description.
Say we are getting the data from third party system and the message may have multiple IDOcs in it. The message has processed successfully from PI and reached to the target system(ERP). So, now my question is how to track the IDOc count with in that message.
Please suggest on the same.
Thanks in Advance,
Venkateswarlu.

Hi Hareesh,
Thanks for your inputs. According to the link IDOC Status, Tracking in SAP PI/PO Single Stack I am thinking the required funcionality is not there in PO 7.4, but still i would like to have little more clarity before moving further.
I will explain what what was happening in PI 7.11 so that you can understand what i am looking for in PO 7.4.
We will get the data from third party system in xml format, we had to search for the messages based on interface name and time range within SXMB_MONI. After getting the result(say the output is 100 messages), we will download the values of "Outbound Reference" field(which is a key to find the child messages for messages resulting in an Interface Collection). Below is the snap of Outbound Reference field for your reference.
Now we will go to the table IDXRCVPOR in SE16(within PI) and put the values of Outbound Reference field in Text 24 and execute. Here we will get all the child messages.
Now please let me know if this kind of scenario is possible in PO 7.4.
Thanks,
Venkat.

PI 7.4(Single stack) Idoc to file + additional done file

Hi All,
here the requirement : I want to convert Idoc to file in PI 7.4 (single stack) and send to FTP location with time stamp (eg: xxx_06082014123055.txt) and also need to create another empty file with same time stamp (eg: done_06082014123055.txt) after transferring xxx file. when the target system find the done file then it process the xxx file and deletes done file.
one way is I could create a 2 operation mapping and 2 service interface which will then configured in ID as two receiver interface mentioning 'maintain order at Runtime' pointing to same communication channel but the filename had to be created in UDF in mapping.
My question is , Is there any other alternative or better way to achieve this??
ur ideas pls....
Sha

Hi Sha,
You can use the multimapping concept, you will generate two messages and two files, with the second message only with its root element in order to create an empty file. Check these links to know more about the multimapping concept:
Multi-Mapping without BPM - Yes, its possible!
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90dcc6f4-0829-2d10-b0b2-c892473f1571?overridelayout=t…
Regards.

IDoc status 53 in employee replication from SAP HR

Hi experts,
We are having some problems in CRM BP creation with role employee.
We are using CRM 5.0 and SAP ECC 6.0 and we are trying to replicate employees information to CRM from HR.
After read the notes 934372, 615896, 550055, 363187, 312090 we made the next configuration steps in our systems:
R/3:
- Creation of connection port (trans. WE21)
- Creation of logical system (trans. WE20) and assignment of outbound message HRMD_ABA
- Creation of distribution model (trans. BD64) with all filters indicated in note 312090
CRM
- Creation of logical system (trans. WE20) and assignment of inbound message HRMD_ABA
- Creation of conversion between basic types HRMD_A05 and HRMD_ABA01 (trans. WE70) as described in note 312090
- Creation of conversion between message types HRMD_A and HRMD_ABA (trans. WE73) as described in note 312090
- Creation of external number range ZE from HR01200001 to HR01299999 (using PA04 in R3 we found the number range between 01200001 and 01299999)
- Creation of BP Grouping with the same name of number range (ZE) checked to be external too
- Update of table T77S0 (using SM30):
HRALX HRAC X
HRALX PBPON OFF
HRALX PBPHR ON
HRALX PBPON ON
HRALX PNUMB 3
HRALX PPROL BUP003
HRALX PSUBG ZE
PLOGI PLOGI MV
We know we should have the same value in R3 and CRM for PLOGI/PLOGI, so we created in CRM MV because that is the plan version used in R3. To create it, we just manually add a new row in table T778P and then selected it in table T77S0. Is this the correct way to create a plan version?
After these steps, in R3 we execute program RHALEINI with parameters:
- Plan version = MV
- Object type = P
- Object ID = an active employee
- Reporting period = all
- Transfer mode = Insert
- Receiving system:
Receiving partner No = DCRCLNT300 (logical system created in WE20)
Message type = HRMD_ABA
And everything looks fine in R3.
In CRM, using trans. WE05, we can see that the iDoc is created, apparently without problems with status 53 - "Applicaton document posted" but the business partner is never created.
Did we miss some configuration steps?
Should we do something more after see the iDoc in CRM to create BP?
Thanks in advance.
Alda

hi pratk bhai,
ya i have done the same setting what Ada has mentioned eariler,
and as of your suggestion to maintatin the mandatory infotype, i have even done tht,
after running RHALEINI in R3, the status is all green here.
when i run the tcode BD87 to check the Idoc status its showing fine (Error free).
now, through tcode se38 the report CRMHRALE_CENTRAL_PERSON shows all the employees as status green,,
but the partner number is not getting generated. ( i have used HRALX-PNUMB= 3 (Prefeexing the number range coming from R3)).
kindly advice me what should be done in order to generate a BP number for the replicated HR Employee.
best regards,
Madhup

How to find Correct IDoc Status in SAP

Hi All,
I need some help on IDoc scenario, I have custom program to create Idoc and as well it will send IDoc to XI. I want to know idoc staus in the program to update custom table whether idoc sent successfully or not but idoc giving status as 03 (Data passed to port OK) irrespective of idoc send or not, actually idoc not sent to xi when I check SM58 showing error.
Please advice me how to find correct idoc status inside program itself.
**-----Create IDoc
CALL FUNCTION 'IDOC_OUTBOUND_WRITE_TO_DB'
    TABLES
      int_edidd      = i_edidd
    CHANGING
      int_edidc      = wa_int_edidc
    EXCEPTIONS
      idoc_not_saved = 1
      OTHERS         = 2.
COMMIT WORK.
i_edidc = wa_int_edidc.
APPEND i_edidc.
REFRESH i_edidd.
**-----Send Idoc
CLEAR i_edidd.
**-------Send Idoc to XI
CALL FUNCTION 'EDI_OUTPUT_NEW'
    EXPORTING
      onl_option = 'B'
      error_flag = ' '
    TABLES
      i_edidc    = i_edidc
      i_edidd    = i_edidd.
COMMIT WORK.
READ TABLE i_edidc INDEX 1.
**-----Update Dispatch order status based on Idoc status.
IF sy-subrc = 0 AND i_edidc-status ='03'.
    znxi01_update c_03 i_edidc-docnum.
    gw_success_record = gw_success_record + 1.
ELSE.               " Error in Data Transfer
    znxi01_update c_02 i_edidc-docnum.
    gw_fail_record = gw_fail_record + 1.
ENDIF.

Hi Anil,
for setting IDOC Status you can send back a IDOC of type <i>ALEAUD01</i>.
The function IDOC_INPUT_ALEAUD takes automatically this IDOC and writes the status to the origin IDOC.
Regards Mario

IDOC-- XI-- HTTP (non-sap) 403 Forbidden

Hi guys,
When I execute my scenario IDOC>XI>HTTP (non-sap) URL address Asynchr. The receiver receives the message correctly
but in my XI monitoring the message stands in error mode.
At first sight this is not a big problem because the receiver receives the message correctly
but it would be nice if the message would stand in processed succesfully.
The error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>403</SAP:P1>
<SAP:P2>Forbidden</SAP:P2>
<SAP:P3>Service Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 403 reason Forbidden explanation Service Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please don't redirect me to an old topic because I have read all topics and none of them could help me. :s
TIA
Message was edited by: Peter Delve

Hi,
this is the describtion of W3ORG:
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
May contact web admin.
Regards
Matt

MATMAS01 IDOC not reaching to SAP XI via report program.

Dear Experts,
WE are facing small challenge.
I searched on SDN on scenarios: IDOC not reaching to SAP XI. But could not find exact solution t oour scenario.
Problem:
MATMAS01 IDOC is not reaching to SAP XI via report program and is in status of 03 on SAP system. And there are not entries under SM58.
Under SAP XI system IDOC entry is not reflecting under IDX5 transaction, I tried to delete meta data of MATMAS01 thru IDX1 and uploaded again but still IDOC is not reaching to SAP XI.
The strange is that MATMS01 IDOC is reaching to XI via WE19 test tool. So PORT and RFC destination settings betweeen R3 and XI is also correct.
What could be the wrong ?
Thanks
Divyesh

When sending Idoc from R/3,
Settings at R/3
create one port at WE21,
Create Partner Profile for Outbound Message type in WE20.
settings at XI
Create one port in IDX1
Import Matadata in IDX2.
Create complete scenario in ESR for Idoc sender, also import IDoc in Imported Objects.
Check these settings & send test idoc using WE19.

IDOC status 03 but no XML generated

Hi Experts,
I am facing a problem related to idoc i.e. I am getting idoc status 03, still no XML created at the server directory.
Scenario is: A custom idoc is created with a z report which selects data & send idoc as an XML file in the server directory
IDOC (the first \ represents root as it is a unix server, 2nd \ is a saparator nd then IDOC is a folder to save XML files). Folder IDOC is having all permission(777). When i send idoc using the report is fives status 30 & after that when process it through BD87 it gives a status message 03.
I checked the partner profile, port etc. Even in port access test is OK.
I even tried putting directory as //IDOC , /IDOC but then no access possible error came. only work with
IDOC & gives status message 03.
But no idoc is reaching at the other end i.e.
IDOC.
Can anyone tell me how to fix this problem. Is the problem at SAP end of Unix end.
Regards,
Nik

Hi,
Check the Port configuration.In this case mostly problem form port configrations only.
Check Directory,Outbound file paramters in the port configuration.
Thanks,
radha.

IDOC status 54

Hello!
IDOC status 54 - Error during formal application check...
Has this status any specific meaning and usage?
In which cases it is recommended by SAP to set it?
Should it always be followed by a record with status 51?
Thanks and best regards,
Vlad

No answer at all...

Need to change the Idoc Status based on the Text in the Idoc

Hi All,
I have developed Idoc--SOAP Sync Process Scenario Using BPM and Works Perfectly.
I have used STATUS.SYSTAT01 Idoc to capture the Response that is comming from the Webservice.
I have mapped the response Text( Success or Fail) to one of the field in the Response Idoc, this is perfect.
Requirement:
1) If the Response Idoc Field receives Success Text means the Idoc Status shld be in Green Status.
2) If the Respnse Idoc Field Receives FAIL means the Idoc Status shld be in RED Status.
How can i Do this. please suggest me......
Regards

Hi Santhosh,
YES, I have to Capture the Response from Webservice in SAP R/3 by using STATUS.SYSTAT01 Idoc.
I have mapped the response from webservice to the one of the field in the Idoc.
If this field contains Success as text means the Idoc Status in We05 shld be 53 else it shld be 56
With out changing the FM code, can we use any other process to achieve this???
@ Mario
Can u please Allobarate your views more based on my requirement
Regards

IDOC status not changed

SAP support
I am not able to change the IDOC status...
I have also processed the IDOCs many times..
Guidance required...
Kamal

Dear Kamal
Please check your entry in SM12 an delete it and again reprocess it with the help of Tcode Bd87
Thanks
Amit Shivhare

IDOC Status, Tracking in SAP PI/PO Single Stack

Similar Messages

Maybe you are looking for