Idoc stuck in status 3 , Total number of segments : 086255
Hi experts,
We have a small issue in the idoc being sent to partner.
An outbound idoc is stuck in status 03 , the idoc is from a shipment and has 448 deliveries in it. The idoc is with the 86,255 number of segments.
Idoc details:
Basic type SHPMNT05
Extension
Message type SHPMNT
The idoc is having all the deliveries of the shipments in the segments E1EDL20.
Do we have any specific limits for : 1) Max Number of segments an idoc can hold.
Please let me know. How we can over come this problem and send the idoc successfully to partner.
Thanks in advance.
Regards,
Ram
Hi,
Check with the packet size you have mentioned in the outbound parameters.. May be by increasing the packet size it may accommodate more records in one idoc..
or
Otherwise there may be a possibility that it may accommodate only 65535 segments.
Thanks&Regards
Sarves
Similar Messages
-
Shipment IDOC stuck in status 03, having segments 86,255
Hi experts,
We have a small issue in the idoc being sent to partner.
An outbound idoc is stuck in status 03 , the idoc is from a shipment and has
448 deliveries in it. The idoc is with the 86,255 number of segments.
Idoc details:
Basic type SHPMNT05
Extension
Message type SHPMNT
The idoc is having all the deliveries of the shipments in the segments
E1EDL20.
Do we have any specific limits for : 1) Max Number of segments an idoc can
hold.
Please let me know. How we can over come this problem and send the idoc
successfully to partner.
Thanks in advance.
Regards,
RamHi,
Process with program RBDMOIND to bring the idoc from status 03 to 12, and check the SM58 also.
1. Status 03 indicates "idoc ready to pass to port".
2. Status 12 indicates " Dispatch ok" means data transfered through port.
Thanks,
Asit Purbey.
Edited by: Asit Purbey on May 27, 2009 4:28 PM -
Urgent:Idoc stuck with status 03 in TRFC
My Idoc is in status 03, but it is not reached to destination.
I guess It is stuck in Rfc layer or in some QUEUE.
There was quality system refresh last week here with Production system.
Pelase suggest what seetings need to be changed and where.
in SM58 it give the following error
'RFC address XXXXXXX doesn't exist'
(where XXXXXXX i m not mentioning here for Client security reasons)
is there any program to clear these layers?
Thanks a ton in advance and the answer will be adequately awarded.hi,
whnevr ur idoc is in status 03 just run the transaction BD75.
the status will be converted to 12 and datawill be passed.
reward points if hlpful. -
Idocs stuck in workflow at status 51
Hi all,
There are lot of Idocs stuck in status 51 in workflow. Work flow error message reads as "Document OvershipCl does not exist". Can someone explain what does this mean and how do we clear these items.
Regards,
SantoshHi Santosh
You could also use transaction BD87 for further analysis and processing. This is more interactive. Please select the IDOC and on the left screen the the status record with entry 51 will have the details as to why the IDOC failed. Please correct as required in order that the IDOC will get processed.
Hope it helps. Please do assign points if found useful.
Regards,
Karthik -
Total Number of IDocs in SLA Reporting
Hi,
can anyone tell me, how to add the total number of IDOCs to the SLA Reporting?
Thank you
TimmDog Pa, That information is in the status bar. If the status bar is hidden, enable it by clicking CTRL+/.
Then it will look as it did in previous versions of iTunes. -
Downloaded the most recent versin of Itunes. Now I can't see the total number of songs in my Itunes library as before. It used to be on a status line at bottom of song Library screen. Where can I view the Total ???
From the View menu > Select "Show Status bar...'
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/ -
Revision: 15195
Revision: 15195
Author: [email protected]
Date: 2010-04-01 17:51:23 -0700 (Thu, 01 Apr 2010)
Log Message:
1. Ensure that fragment ID will not exceed the total number of fragments as indicated by the segment run table.
2. Fix bug FM-574, FM-586 and FM-614
Ticket Links:
http://bugs.adobe.com/jira/browse/FM-574
http://bugs.adobe.com/jira/browse/FM-586
http://bugs.adobe.com/jira/browse/FM-614
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/events/HTTPStreamingFileHandlerEvent.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPNetStream.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPStreamingNetLoader.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/AdobeBootstrapBox.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/AdobeFragmentRunTable.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/BoxParser.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FFileHandler.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/flv/FLVTagAudio.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/flv/FLVTagVideo.as
osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/FLVTestHelper.as
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagAudio.as
Added Paths:
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagScriptDataObject.a s
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagVideo.asRevision: 15195
Revision: 15195
Author: [email protected]
Date: 2010-04-01 17:51:23 -0700 (Thu, 01 Apr 2010)
Log Message:
1. Ensure that fragment ID will not exceed the total number of fragments as indicated by the segment run table.
2. Fix bug FM-574, FM-586 and FM-614
Ticket Links:
http://bugs.adobe.com/jira/browse/FM-574
http://bugs.adobe.com/jira/browse/FM-586
http://bugs.adobe.com/jira/browse/FM-614
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/events/HTTPStreamingFileHandlerEvent.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPNetStream.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPStreamingNetLoader.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/AdobeBootstrapBox.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/AdobeFragmentRunTable.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/BoxParser.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FFileHandler.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/flv/FLVTagAudio.as
osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/flv/FLVTagVideo.as
osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/FLVTestHelper.as
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagAudio.as
Added Paths:
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagScriptDataObject.a s
osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagVideo.as -
How to find total number of records in a BDoc?
Dear all,
I have replicated about BP 1088 records from ISU into CRM system with block size 100. Technically on SMW01, for each successfully processed BDoc, there will be 100 records (corresponds to 100 block size). But due to some failed BDocs, not all "successfully" BDocs will have 100 records each, some may have only 1 record inside...or 30...or 88 for example. So, may i know how to find or is there a report i can look into to find the total number of records clearly shown for each of the successfully processed green status BDocs???
Please help and points will be rewards!!
Thank You
Best Regards,
CKI am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
SQL> create table emp_crap as select * from emp where 1 = 2;
Table created.
SQL> declare
2 v_cnt number := 0;
3 zero_rows exception;
4 begin
5 for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
6 loop
7 if v_cnt = 0 then
8 v_cnt := rec.rn;
9 end if;
10 end loop;
11 if v_cnt = 0 then
12 raise zero_rows;
13 end if;
14 exception
15 when zero_rows then
16 dbms_output.put_line('No rows');
17 end;
18 /
No rows
PL/SQL procedure successfully completed.
-- Now, let us use the table, which has the data
SQL> declare
2 v_cnt number := 0;
3 zero_rows exception;
4 begin
5 for rec in (select * from
6 (select rownum rn, e.ename from emp e)
7 order by 1 desc)
8 loop
9 if v_cnt = 0 then
10 v_cnt := rec.rn;
11 dbms_output.put_line(v_cnt);
12 end if;
13 end loop;
14 if v_cnt = 0 then
15 raise zero_rows;
16 end if;
17 exception
18 when zero_rows then
19 dbms_output.put_line('No rows');
20 end;
21 /
14
PL/SQL procedure successfully completed.Thx,
Sri -
How can I view the total number of songs in my iTunes?
iTunes no longer displays to the total number of songs. Also the side scroll bar has disappeared. Can anyone help?
Thanks
MarciaYou can restore much of the look & feel of the previous version with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
tt2 -
How can I get a report with total number of pages printed on my HP Officejet Pro 8610?
Since knowing the number of pages I print is so critical to a choice of using the "HP Instant Ink Plan" or not, how can I find the total number of pages I have printed on my brand-new (installed 2 days ago) 8610? And if I can, is it a "resettable" or rolling total? Don't see anything in user guide and a search yields nothing usable on this blog.
Printer is installed wirelessly on an older PC with Windows XP SP3. I can also of course intstall it with network cable but so far it works OK on my home network without network cable. If it matters which OS, I also have a Lenovo laptop running Vista on which I can install this printer.
Please do not respond that I can find the total by counting the number of pieces of paper I have. Surely the internals of this fine machine must have the requested data so that HP can tell my usage if I select the monthly ink plan!
This 8610 was a good buy (net $89.00 after trade-in of my six year old J36xx Deskjet) at Office Depot/Max which of course influenced my decision to buy it. So far I am very happy with printing qualities and speed, have not tried the scanner yet and will probably never use the fax since I have no land line phone.
Thanks,
Harry
This question was solved.
View Solution.Hi,
Section #2 of the Printer Ststus report will tell you. Please try:
Printer status report
Use the printer status report to view current printer information and ink cartridge status. Also use the printer status report to help you troubleshoot problems with the printer.
The printer status report also contains a log of recent events.
If you need to call HP, it is often useful to print the printer status report before calling.
To print the Printer Status Report
1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup.
2. Touch Print Reports and then touch Printer Status Report.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Total number lines, in an alv (REUSE_ALV_GRID_DISPLAY)
Hi,
i want to know, if it´s possible to show the total number of lines displayed in an alv. I´not not sure if that, is an event of the table gt_events[] (maybe the end_of_list one???)
I would like to show this total, like an status message...
Thanks in advance
Carlesreport ztest_alv1 .
type-pools: slis.
data:
ls_fieldcat type slis_fieldcat_alv,
lt_fieldcat type slis_t_fieldcat_alv,
lt_sort type slis_t_sortinfo_alv,
ls_sort type slis_sortinfo_alv.
data: v_line type i,
lines(3) type c.
DATA: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
data: it_events type slis_t_event,
x_events type slis_alv_event.
data: begin of itab occurs 0,
vbeln like vbak-vbeln,
posnr like vbap-posnr,
end of itab.
itab-vbeln = '12345'.
itab-posnr = '10'.
append itab.
clear itab.
itab-vbeln = '12345'.
itab-posnr = '11'.
append itab.
clear itab.
itab-vbeln = '12345'.
itab-posnr = '12'.
append itab.
clear itab.
itab-vbeln = '12356'.
itab-posnr = '10'.
append itab.
clear itab.
itab-vbeln = '12356'.
itab-posnr = '11'.
append itab.
clear itab.
itab-vbeln = '12356'.
itab-posnr = '12'.
append itab.
clear itab.
describe table itab lines v_line.
lines = v_line.
PERFORM E04_COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
x_events-name = 'TOP_OF_PAGE'.
x_events-form = 'TOP_OF_PAGE'.
append x_events to it_events.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = sy-repid
i_internal_tabname = 'ITAB'
i_inclname = sy-repid
changing
ct_fieldcat = lt_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ls_sort-fieldname = 'VBELN'.
ls_sort-up = 'X'.
*ls_sort-group = 'UL'.
append ls_sort to lt_sort.
clear ls_sort.
ls_sort-fieldname = 'POSNR'.
ls_sort-up = 'X'.
*ls_sort-group = '*'.
append ls_sort to lt_sort.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = lt_fieldcat
it_sort = lt_sort
it_events = it_events
tables
t_outtab = itab.
FORM E04_COMMENT_BUILD USING E04_LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'NO of lines'.
LS_LINE-INFO = lines.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
ENDFORM.
* FORM TOP_OF_PAGE *
form top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
I_LOGO = 'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
endform. "top_of_page
check this code..
regards
vijay -
Hello All:
I am very new to Power Shell and need some help:
I have 224 GAL's on our Exchange System (Ex 2007) where, I need to count the total number of email addresses/display names assigned to each GAL. I am not sure how to set up a for-next loop in PowerShell. I am not sure how to set a input
file/variable, with the names of each GAL. (GAL is Global Address List)
I think it's $GALLIST = 'NameofGal1, NameofGal2, etc thru to NameofGaln' where n is the last GAL in the list.
So I need to now a command which would get all the gal names (Get-AddressList(?) for all the GAL's in the Exchange System and then pipe them into a function to count the number of email addresses.
In making a start with the following code and got stuck:
Get-Mailbox | Where {$_.GlobalAddressList -eq “GAL” -and $_.} | Select-Object Displayname, EmailAddresses, count
Missing or invalid property reference or expression.
At line:1 char:71
+ Get-Mailbox | Where {$_.GlobalAddressList -eq "GAL" -and $_.} <<<< | Select-Object Displayname, EmailAddresses, count
I think I know how to pipe the results to a csv file - with - Export-Csv -path c:\filename.csv - NoTypeInformation.
Please can someone advise. Please help.
Thanks in advance
PS - is there a way to access, read and display variable name and value which stores the number of email addresses/per GAL in exchange 2007 database so you don't have carry out a count exercise. Because this metadata will be in the Exchange DB?
Would this be easier to get?
Started building conditional statement:
Get-Mailbox | Where {$_.GlobalAddressList -eq "GAL" AND {{HiddenFromAddressListsEnabled -eq $True} OR {HiddenFromAddressListsEnabled -eq $False}} |
If {{HiddenFromAddressListsEnabled -eq $True} | Select-Object Displayname, EmailAddresses, count ELSE {HiddenFromAddressListsEnabled -eq $False}} | Select-Object Displayname, EmailAddresses, count
ENDIF
Export-Csv -path c:\test.csv -NoTypeInformation
Will this work? Checking to see how to do a for-next loop.
$GAL = Get-GlobalAddressList
foreach($GAL IN $GAL)
Get-Mailbox | Where {$_.GlobalAddressList -eq $GAL AND {{HiddenFromAddressListsEnabled -eq $True} OR {HiddenFromAddressListsEnabled -eq $False}} |
If {{HiddenFromAddressListsEnabled -eq $True} | Select-Object Displayname, EmailAddresses, count AS "Count of Hidden Addresses" ELSE {HiddenFromAddressListsEnabled -eq $False}} | Select-Object Displayname, EmailAddresses, count AS "Count of
Visible Addresses" |
Export-Csv -path c:\test.csv -NoTypeInformation |
not sure if this works and looks spaghetti -like!Hi Everton,
In addition, If you want to export GlobalAddressList, please refer to the script below:
$filter = (Get-GlobalAddressList 'Default Global Address List').RecipientFilter
#filter HiddenFromAddressListsEnabled is ture
Get-Recipient -RecipientPreviewFilter $filter | Where-Object {$_.HiddenFromAddressListsEnabled -eq $ture} | Select-Object Name,PrimarySmtpAddress
#filter HiddenFromAddressListsEnabled is false
Get-Recipient -RecipientPreviewFilter $filter | Where-Object {$_.HiddenFromAddressListsEnabled -eq $false} | Select-Object Name,PrimarySmtpAddress
Refer to:
How to Export the Exchange 2010 Default Global Address List (GAL)
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
EDI / IDoc : While posting inbound IDocs, IDocs gets into status 56
EDI / IDoc : While posting inbound IDocs, IDocs gets into status 56 with message "EDI: Sender port in control record is invalid".
But if I reprocess the same idoc without doing any changes using RBDINPUT and select radio button to processs idocs for status 56, then it gets successfully posted.
So not getting why this stucks for the first time.
Thanks in Advance..........i fixed this my self
-
How count the total number of instances ?
I have 2 scenarios :-
1. How to get the total number of instances of the node in a BO?
eg :
businessobject BO1 {
element BO_ID;
node NODE1 [0..n]
element Node_ID;
element Status ;
element value:
I want to get total number of the NODES instances in the particular instance of the BO1. !!!?????
2. I want to make some calculations based on the attributes of the NODE1 , in the BeforeSave .absl of the Business Object BO1.
eg:
something like this :-
In BeforeSave of BO1.absl -
for ( all the instances in NODE1 )
{ if (NODE1.status == true)
sum = sum + NODE1.value
Please help !!!!Your approach is correct.
You can use a standard Query or create your own Query to run through Datainstances.
Documentation with examples for Queries in ABSL see here: https://my020062.sapbydesign.com/sap/ap/ui/repository/SAP_BYD_WEKTRA/CP/sapLSUIContentPlayerTestPage.html?manifest=067D03A7602B1D490899DF46B5082089&COMPONENT=A1S_PDI&RELEASE=260&LANGUAGE=en®ION=&INDUSTRY=&TASK=CR_VIEW&sap-language=EN
Looking / Clincking for "SAP Business ByDesign Scripting Language" and "Syntax for Implementation of Actions and Events" and "Query" -
How do I see total number of songs in itunes 11.0 music library?
I can see the total number of songs in my playlists but not in my music library in itunes 11.0. Can anyone help. Is there an instruction book available for the new version of itunes 11.0?
When I go to view and 'show status bar' I still am not seeing the total number of songs in my 'music' library.
Maybe you are looking for
-
Add change Icon in the Table Control tool bar.
Hi Abapers, I need to add "change" icon in the table control. I added it but when I click on it is not working. My requirement is that when I run my custom report, all the fields should be shown is in display mode. Then when I click on the "change" i
-
HT3131 how do i get audio from my HDTV when using a hdmi cable and mini displayport??
How do I get audio to display from my HDTV when I'm using a hmdi cable and a mini-displayport adapter on a macbook late 2008??
-
Self Registration in OIM 9.x
Hi Guys, Share ur experience or else let me know the links where i can get the solution to the below mentioned scenario ----> 1. I have to add few additional fields in the UDF form for self-registration ,without disturbing the existing availble field
-
i have extensive gui application ,i am using events ,but i am caught,i want to konw abt events ,there pros and cons,time out ,how to program in time out
-
Can't open/edit Office files
Hello, We can't edit Office (2007) files when we open them over Teaming. E.g.: We have under Teaming a file directory with an Excel file. When we click on 'edit' the Excel application starts and a login dialog pops up. After the values are entered th