IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

Hi
We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
Any help in this regard is highly appreciated.
Thanks
Pandiri

User Exit activation and fixing the issue in user exit fixed this issue.

Similar Messages

Syntax error in standard program after upgrade

Hi,
After upgrade from 7.0 to 7.3, we are facing a syntax error in standard program that is used in one of our process
The error says:
The field "G_REQUIDPARENT" is unknown, but there is a field with the s"
imilar name "G_REQUID_LAST". "G_REQUID_LAST"."
The system cannot find this object inside include LRSBM_REQUEST_GUIP04, that belongs to program SAPLRSBM_REQUEST_GUI
We assume that this is associated with the upgrade but we cannot find any solution in the web. Besides, this is a standard program so we cannot perform any change directly. We look for SAP Notes to apply but we didn't find nothing worthwhile
Basically, we are receiving a dump with the error message posted above and we found the syntax error, but the thing is that we don't know how to fix it, due to the fact that is a standard program and we cannot change it
I know that SAP could remove some object reference during the upgrade, but there should be an anticipated plan to fix this kind of errors, right?
Can you shed some light on this, please ?
Thanks a lot
Ale

Hi Ale,
If you make sure there are no customization around the object and SGEN already run, I think you can just open a OSS message to SAP to looking for a fix.
Regards
Bill

Error in text formatting after upgrade to ECC6.0

Hi all,
After upgrading from 4.6C to ECC6.0, we encountered the error "The SD_WORD_PROCESSING function module is for creating the "Maintain Text" dialog box. It seems that after upgrade, some of the text procedure in the configuration is missing. Did anybody encounter this problem? Please advise.
Thanks.

Hi Mei,
Welcome to SDN.
It seems the customizing for the texts (Transaction VOTX) is incomplete.
Please check OSS Notes 150775 and 751690 for more detail information.
Regards,
Ferry Lianto
Please reward points if helpful.

Error in depreciation postings after upgrade to ECC6.

Hi FI/Asset Gurus
We recently upgraded from 4.7 to ECC6. In 4.7 our depreciation postings were working fine but, after upgrade it is throwing an erroru2026u2026..
Create document number range Z2 using internal number assignment
Our number range Z2 has always been External Assignment, before and after the upgrade. Is there something changed in ECC.
Please help me out?
Thanks
Rajesh

Hi rajesh
From ECC 5.0 onwards, your dep no range has to be internal..
So, remove the tick for "External" in your no range for depreciation doc type.
Regards
Ajay M

Error Msg with Itunes After Upgrade

Hi All-
I've recently upgraded to itunes 7.0.1 and when I try to update my ipod I get an error message that says (paraphrased) "Can't update ipod. The file is in use."
This happens once for every song or podcast or video I try to add, but if I click okay it will update the ipod anyway. So...the update is working, but I have to babysit it and click okay for every item I add.
Any thoughts?
Thanks,
Lisa

ok. most of the posts that i just read about your problem indicate that you should turn off any anti-virus software you're using completely an then try to sync your ipod. if you want to use keywords, type in the following exactly: "Can't update ipod. The file is in use." (without quotes). Hope this helps.

Idocs failing after upgrade to ecc6

Hi Experts,
we upgrade the system to ECC6, before the idoc to idoc scenario was workinf fine, but after upgrade we are getting error in we02 with Function Module Not Allowed
Can any one help what was the wrong???
Kind Regards,
Praveen

Praveen,
Check out the message code and corresponding processing code in partner function(TC:WE20). Go to transaction WE57 and check for function module entry against your idoc basic type ( & Extension - if it is extended idoc) / message type. I think entry is missing here.
Thanks,
Nilesh

**Error** Scene 1, Layer 'actions', Frame 1, Line 664: 1087: Syntax error: extra characters found after end of program.

Scene 1, Layer 'actions', Frame 1, Line 664: 1087: Syntax
error: extra characters found after end of program.
I am new to importing classes and I have been practicing
making a photo gallery. I am stuck and I want to know if someone
can help me with the error I am getting.
If it is convenient, you can download and test my .zip at
www.dhtmlguy.freeservers.com
Thanks in advance!

thanks...the small stuff gets me every time.

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

ITunes doesn't sync iCal with iPhone after upgraded to Mountain Lion

iTunes doesn't sync iCal with iPhone after upgraded to Mountain Lion. I even tried to use Replace Information On This iPhone and it doesn't work. Any idea guys?

I'm having the same problem. It's as if my iPhone and MacBook Pro now have two separate calendars.
Basically, I have a MacBook Pro (Mountain Lion, 13", late 2011) that I sync via USB with an iPhone 4S (iOS 5.1.1). Before upgrading to Mountain Lion, all of my iCal events would sync flawlessly. But none of the events I've created in iCal (Calendars) since upgrading have synced to the iPhone. Likewise, no new events that I create on the iPhone Calendar will sync to iCal. Also, changes to an existing event (even one created before upgrading to Mountain Lion) don't get synced either.
Everything else seems to be syncing just fine though (music, apps, contacts, etc).

How itunes cannot sychrnoise with iphone after upgrading latest IOS

why itunes cannot sychrnonise with iphone after upgrading the latest IOS?

Sounds like your iPhone was previously hacked/jailbroken. If true, try using google.

Paym.guar.proc. Field is Disable after Upgrade to ECC6

Hi All,
Would like to have your guide and opinion which Paym.guar.proc. Field is Disable after Upgrade to ECC6.
Thank you in advance.

Hi Lakshmipathi,
As per checked, only SO to DO document created only.
We have implemented below change Note : 1736052 with change of SAPMV50A2112, I/O field LIKP-ABSSC from output field to input field that was working fine.
Please let us know you have any feedback on it.
1736052 - Entering the payment guarantee procedure in delivery note
Trevor Wong.

After upgradation to ECC6.0 two fields in report not showing

Hi,
While running Z report Vendor and Material Description is not appearing.This problem is faced after upgradation to ECC6.0.In 4.6C it was showing in detailed. Is there any reports for settlement document having material & vendor code with description.
Regards
Nitin A

Hi Mohamed,
Thanks a lot for your immidiate reply.
Is there any reports for settlement document having material & vendor code with description.
Regards
Nitin

Short Dump-Syntax error program"CL_RSD_MULTIPROV==CP" after EHP1SP5 upgrade

Hi,
MultiProvider Activation/Display data is resulting into short dump with following text
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSD_MULTIPROV==============CP " in include
"CL_RSD_MULTIPROV==============CM010 " in
line 1:
"Method "CHECK_LINITFL" is not declared or inherited in class "CL_RSD_M"
"ULTIPROV". -"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
We have recently upgraded to EHP1SP5. We noticed this issue just after that.
Regards,
PD

Hi,
Please check the note 1461401.
1461401 - System error in the program CL_RSD_MULTIPROV_CHECK
This note should help you.
Regards,
Rafael

Syntax error after upgrade to ECC6

Hi,
I have customized infotype and BAPI in SAP 4.6. After upgade to ECC6, my Infotype is working fine, but my BAPI give this error :
The following syntax error was found in the program SAPLZBAPI_HR :
"INCLUDE report "%_HR9000" not found."
If I goto SE38 to recreate %_HR9000, SAP not allow me to continue and appear message "Do not use any special character".
May I know how to resolve this problem ?
Thanks a million.
Regards,
Eric

Hi,
In the ECC6.0 version, it seems that one of the INCLUDE that was generated for that infotype in 4.6 C ending.. with words....HR9000 was not transported or not found for that infotype. Please check all the includes..
In SE38 you can enter the characters like %, so that error is coming
% means LIKE PATTERN ....HR9000 .
Hope you understood.
Regards,
ANJI

Error on starting MDS after upgrading from MDM 7.1 sp04 to sp05

Hi ,
I tried to upgrade my local setup from sp04 to sp05.
I used sapins to upgrade with update option.
In the second last step when we get option to which server you want to start after upgrading i select all three servers
i.e. mds ,mdis,mdss
This installation completed with error.
In the log file i found this logs.
The problem is i am able to start mdss and mdis of updated sp but not mds.
In the console i can see the version of mdss and mdis to sp05 but there is no version coming in the case of mds.
Please help me on this isssue
WARNING 2010-07-22 00:46:55.224
Execution of the command "C:\usr\sap\MDM\MDS00\exe\sapcontrol.exe -nr 00 -host INLD50054767A -function
GetProcessList" finished with return code 4. Output:
22.07.2010 00:46:55
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
mds.EXE, , GRAY, Stopped, 2010 07 22 00:42:21, 0:00:00, -1
INFO[E] 2010-07-22 00:46:55.224
CJS-30086 Instance MDM/MDS00 [STOP] did not start after 5:00 minutes. Giving up.
ERROR 2010-07-22 00:46:56.318
FCO-00011 The step startUpdatedInstances with step key |MDM_Update|ind|ind|ind|ind|0|0|startUpdatedInstances was executed with status ERROR .
Thanks,
Sudhanhsu

Hi Sudhanshu,
You could check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed. It solved same problem on our side.
Best regards,
Jah

IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

Similar Messages

Maybe you are looking for