Idoc Tables for Message segments

Dear Experts,
I was find SAP table for Idoc Message Type for WPUBON for report of Sales Auditor
Plz help
Regards,
Richa Grover

HelloRicha,
Message Type        Msg
                               Code Msg
                               Fn Inbound Event Code                     Function
WPUBON                 WPUB                                               IDOC_INPUT_POS_SALES_DOCUMENTS

Similar Messages

The IDOC-SDATA for the segment E1EDP01 does not have the whole value passed

HI
I am triggring the ORDERS05 Idoc from TCode - WE19 .
In the E1EDP01 segment I have populated the quantity field , UOM field , currency field and the plant field.
I am facing the issue
1) It is not updating the plant field in R/3 orders that are created .
2) I debugged the code and found that the data for the currency field and the plant field is not being pulled in the IDOC-SDATA for the segment E1EDP01 .
Any idea why is this happening
Thanks
Nikhil

HI
I got the answer for it.
This has to be delt in the E1EDP02 segment with the qualifier value as 083 and the document value as the plant
Thanks
Nikhil

1 request Idocs created for message type MATMAS

Hi Experts
I have done necessary config.
I have attempted BD10 and BD11.
I have got message that "1 request Idocs created for message type MATMAS"
But iam unable to find the material in target system.
Please suggest what need to be done.
regards
ramSiva

Marias,
And in PI, after having changed the password (why not), have you unlock this user account ? in SU01 of PI, you have a lock button.
if you did it, and changed also the password, as explained, you have perhaps another (or several) program like a RFC destination which uses another password, and so after some exchanges... with a bad/old password, you have your message "too many...", and then the user is again locked...
If you change the password in PI, you should change it in all application which uses this user. I hope you have not the same user from ECC to PI, than from a third-party to PI...
that's why: the use of such technical users have to be referenced in a doc. By this way, if password has to modifiy, we know where we have to update it (mainly in different RFC destination).
Mickael
Edited by: Mickael Huchet on Dec 5, 2011 5:33 PM

Table for messages in FOX

the messages that are allowed to implement in FOX read a tables of messages , in what table I cand find these messages? (in order to see it trough se16 transaction)
Regards

Hello,
Try tcode se91.
Regards,
Jorge Diogo

SRM table for messages

Hi,
I'm looking for the table in SRM wich contains the output messages with regard to Po's. I found that SRM does contain table NAST similair to R/3, however when I look into it, it isn't populated. The NAST table in R/3 only shows info for PO's that were created locally. I'm a BI consultant who is looking for the medium and date of PO output messages.
Greetz

Hi,
All messages you can find in the table T100 or in transaction SE91.
Rgs,
Pedro Marques

Table for messages

hi,
messages avaliable in se91 are stored in which table

Hi,
Go to SE91
Give the Message Class to see all the messages.Kindly check the FAQ link in the forum
T100 --> Messages
T100S --> Configurable system messages
T100U --> Last person to change messages
T100V --> Assignment of messages to tables/views
T440F --> Exception messages for the forecast
T458B --> Description of exception messages
Regards,
Chandru

Idoc generation for message types

Hi All,
regarding IDOC generation....
how do we activate the message type so that every time the application data which is created or changed or deleted generates the idoc and send it to other system. If iam not using Chnage pointers technique then i would not be activating the message type in BD50. In such case ie if the message type is not present in BD50 list and if change pointers is not used to transfer that message type . How do we genrate the idoc for such message types.
Thanks
Avinash

Hi,
For ur scenario u need to go for change pointers method only.U have other options like distributing master data and transactional data..But i don't think anything otherthan change pointers is useful.
Regards,
Nagaraj

Problem LSMW + IDOC method for message type : MATMAS

hi friends,
I am using LSMW + IDOC method Message : MATMAS , idoc type : MATMAS03 .Setting every thing are fine. Finally Material is not created with error "message have been issued number : <idoc number>".
data : material, industry type, material type, description, Basic unit of mesure.
Please help me.
Balaji.T.

Hi,
I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
Regards,
Klaus

Inbound problem for message type WPUUMS

Dear all,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun

You have to analyze where exactly the problem is.
There are several reasons why the Idoc did not post:
1) The Data you are sending to post document may be wrong. You may have to validate against valid data in Database.
2) Thre may be some mandatory data which you are not passing through IDoc (Idoc data may be missing).
It is not possible to answer a generic question like this with perfect answer.
Best way is to debug and find out why exactly the problem is, if you know the error message (you may see it in Status record of this IDoc).

Could not determine recipients for message type ACLPAY

Dear friends,
I am getting error while doing Invoice Verification as "Could not determine recipients for message type ACLPAY"
Please advice how to resolve this issue.
Thanks

Hi
This is IDOC settings for message type ACLPAY there is no receipient please check transaction code WE20 and please get in touch with your technical team
Thanks & Regards
Phaneendra

How to generate multiple files for each segment in the IDOC

Hi,
I have a IDOC with multiple segments, for each segment, a file needs to be generated,
There is only one target structure. Please let me know as to how do we handle this requirement in XI.
Regards,
Younus

Use multimapping in message mapping. Then map the Idoc node to the Message Type of File.
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
Regards,
Prateek

Table for Idoc details including messageID

Hello All.
Is there any table in ECC end , where we can get inbound iDoc details including message ID (which is same as that of Message ID of XI sender system )
I need to find this MessageID information for thousands of IDoc.
Normally we need to open each idoc control structure's Detail tab to find this.
Thanks,
Shiv

Hello Avinash,
I already seen in tables EDIDC and EDIDS but not able to find the message ID details of sender system (XI system ) .
Thanks,
XI team

Custom segment does not exist for message type Debmas_cfs

Hi,
I have created a custom segment YEXTRA for basic type DEBMAS06.
I have done the configuration in We82 and We20.
I have implemented the segment in User Exit "EXIT_SAPLVV01_001". Now when I am executing the TCODE BD12 then it is creating the Idoc with custom segment. But when I apply the filter on sales org in BD64 then it starts giving me error that " Segment Y**** does not exist for message type DEBMAS_CFS.
Kindly suggest if I need to do some other configuration also.
Thanks.
Regards,
SAurabh

Hi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi

Tables for IDOC's

Some time ago I created a job which deletes all idocs older than 1 year.
I am asked now to check what is the benefit in term of space(tables, database..)
I wander in which tables idocs are stored(if tables are different for different idocs could you let me know tables for most commonly used)
. However I am afraid (having oracle database) I can not see the benefits as segments/database just grows regardless of empty space.

Jan,
Check below links for idoc tables
What is the name of the IDoc table
Re: IDOC Table
Idoc table
Re: idoc
To reduce the Oracle DB size check below link
Re: How to reduce oracle DB's size?
Re: degradated indexes of the table D0101INC
Hope it helps
Thanks
Sushil

Sales Order no and IDOC No Link table for Sales Out bound IDOC ORDRSP

Hi Friends
How to find Sales Order no and IDOC No Link table for Sales Out bound IDOC ORDRSP.
Thanks in Advance.
SR

Hi
If the idoc is managed by message, the link are stored in GOS (Obeject Service)
U can try to use the function module NREL_GET_NEIGHBOURHOOD
If you put
IS_OBJECT-OBJKEY = <sales document>
IS_OBJECT-OBJTYPE = <business object> (I think BUS2032)
the function returns the idoc
or if you put
IS_OBJECT-OBJKEY = <idoc number>
IS_OBJECT-OBJTYPE = <business object> (I think IDOC)
the function returns the sales order
You can investigate that function module in order to find out the tables
Max

Idoc Tables for Message segments

Similar Messages

Maybe you are looking for