IDoc to ABAP Server Proxy scenario

HI Experts,
Recently our client has upgraded his R/3 system. From this R/3 system, IDocs are posted to SRM system thorugh XI.
On receiver side we are implementing ABAP Server Proxies.
We have recomended our client with all necessary changes to be done on XI Server during change over from old to new R/3.
After change over, they have tested the scenario, posting the IDocs to the SRM system. We found the follwing error in SXMB_MONI, Could some one tell me where exactly to look in to it.
An error occured within an XI interface: The reference to a source object via the object number is different than the reference via the GUID Programm: SAPLBBP_BD_API; Include: LBBP_BD_APIF39; Line: 175
Regards
Praveen

Hi,
Pl implement note 1052569.
And run report "RPODDELVRY",
MM-SUS scenario mapping of the Goodsreceipt for inbound delivery @SUS
Thanks
Swarup

Similar Messages

File to ABAP Server Proxy Scenario

Hi 2 all,
I am running File to Server(ABAP) Proxy scenario...
I have checked the ABAP Server Proxy at application server only and it is working fine....But when i am running the whole scenario my server proxy is not getting executed..( i.e my file is being picked up but proxy is not getting called ..:(( )
Can i expect some valuable inputs regarding this issue..?
Regards,

to debug the problem....
first check SXMB_MONI of R3 system... where proxy has been created.
1 .check whether your proxy has been called ... it will be evident you get any message in moni for you interface or namespace..
2. check you proxy message has not got stucked in queue... sometimes message get stucked in queue and hence proxy are not called.. release the messaeg using smq2.
ELSE
1 .go to SXMB_MONI...of XI..
2. select 'Call Adapter' in right hand of monitor.
3. check the 'trace' under Call Adapter.
4. if you go at end of trace or somewhat near to end.. there should trace like...this ...
Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">Addressing mode: destination</Trace>
<Trace level="3" type="T">Destination = D67CLNT103_HTTP</Trace>
<Trace level="3" type="T">Attributes of destination: D67CLNT103_HTTP</Trace>
<Trace level="3" type="T">Type = H</Trace>
<Trace level="3" type="T">Pipeline = ENTRY</Trace>
<Trace level="3" type="T">Action = EXECUTE</Trace>
<Trace level="3" type="T">Host = XXXXXXX</Trace>
<Trace level="3" type="T">Port = XXXX7</Trace>
<Trace level="3" type="T">Client = 103</Trace>
<Trace level="3" type="T">User = XIAPPLUSER</Trace>
<Trace level="3" type="T">Language = E</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">SSL not active</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
check whether connection establishment between XI and R3 is successful or not...
if you are getting same message as above ,,that means ur RFC is working fine...
problem is on r3 side.. for this go to r3 and check moni...

ABAP server proxy help required

Hello,
I want to make two simple ABAP server proxy scenarios
1. File to ABAP server proxy (async scenario)
2. File to ABAP server proxy (sync scenario)
Pls send me the blogs/docs for the above scenarios.
Regards

Henry,
Please go through the below links.
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Also go through this, if you have problems in your proxy connection.
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Sarvesh

How to debug XI--- R/3 (abap server proxy) code, SYSFAIL in SMQ2

Hi
i have a XI (BPM) to R/3 (ABAP server proxy) scenario,
when the data goes from XI to R/3, it is getting stuck at R/3 inbound queue (SMQ2), with status : SYSFAIL and error text: "No roll storage space of length
3391496 available for internal storage",
we tried activating the queue/ reexecute the LUW, but it still shows the same error status after running for some time,
how can i debug the ABAP server proxy,
pls tell me how can i debug the ABAP proxy code in the R/3
very critical issue

Have a look at SAP Note 17965 - No storage space available
Regards,
Prateek

File to Server Proxy Scenario

Hi,
I am working on ABAP (server)Proxy scenario. My servers are SAP PI 7.1 EHP1 and SAP ECC 6.0 running on HP-UX. I have gone through the Configuration steps for Proxy scenarios document. In that I found I need to create LCRSAPRFC and SAPSLDAPI RFC connections in ECC system and maintain the Program ID which is maintained in the J2ee Engine of ECC server.
But my issue is - ECC system is running on only ABAP Engine.
1. Can I configure Proxies with ECC systems which are running on only ABAP engines?
2. I have ignored LCRSAPRFC and SAPSLDAPI steps and completed other configurations. I am able to see SWCV and Message Interfaces created in PI in ECC (SPROXY Transaction). Does this mean that I can ignore these 2 RFCs and go ahead with Proxy configurations?
Thank you.

>>I have ignored LCRSAPRFC and SAPSLDAPI steps and completed other configurations. I am able to see SWCV and Message Interfaces created in PI in ECC (SPROXY Transaction). Does this mean that I can ignore these 2 RFCs and go ahead with Proxy configurations?
Why we need SM59 destinations SAPSLDAPI and LCRSAPRFC (on ECC) :
LCRSAPRFC reads the exchange profile,
SAPSLDAPI is used by the ABAP API. Maintain the destinations as type T destinations to the registered server program with the program ID SAPSLDAPI. The program ID corresponds to the SLD data bridge.
When using the destinations, the back-end system uses the parameters maintained in transaction SLDAPICUST.
thanks
BJagdishwar

ABAP Server Proxy development for creation of IDOC

Hi all,
I am working on JDBC to ABAP Server Proxy where i need to populate fields and then i need to mapp to the standard IDOC ie, SHIPMENT_CREATEFROMDATA01 which will create shipment idoc this is my requirement.Can anyone provide me the proxy development part for creation of IDOC.
Regards,
Bhoj

Hi,
Create server proxy at the receiver end and deploy it using the following links:
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
How to push data from BI to XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
How to push data into BW from XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
http://help.sap.com/saphelp_nw04s/helpdata/en/2d/b9766df88f4a24967dae38cb672fe1/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/e2bc3d9ecc6b3be10000000a114084/frameset.htm
Server proxy part1 and part2:
/people/sap.user72/blog/2005/12/08/integration-builders-through-proxy-server-part--1
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
Regards,
Vinod.

HOW TO RUN ABAP SERVER PROXY IN BACKGROUND?

Hi All,
I have a ABAP Server Proxy running in WAS 6.20. This Server Proxy runs as a foreground Process when the scenario is executed. if we run a scenario with huge load or run scenarios with continuous load, due to the fact that the server proxy runs as a foreground process, the system slows down and has some performance issues. How to handle this issue.Is there a way to run the Server Proxy as a background Job. Please do help me out.
Regards,
Sundararamaprasad.

hi,
here's an idea: encapsulate your proxy call inside an object which can be ran in background.... like an IDoc !
Steps:
create a zidoc in ECC and use it from PI to ECC to send data (instead of your direct abap proxy call).
Afer that, in z_function_module which is used to intregate your zidoc, call your abap proxy.
in WE20 (partner profile), the process mode of your idoc should be of course "Triggered by background program", and then use a job on program RBDAPP01 (with a variant limited to your zidoc) to process your idocs.
Note:
1. the only interest to do that compare to create a real IDoc interface is just (in my mind) to call a common proxy or to want to reuse an existing proxy without too more effort.
2. of course your current proxy call should be asynchronous.
I never tested it, so it's without warranty !
Regards.
Mickael

Internal table in ABAP Server Proxy

Hi Experts,
I have developed a JDBC to ABAP Proxy scenario.
I have a problem. In my ABAP server proxy I have to import the values into an internal table and pass them to a BAPI for GR creation.
I get an error like. OCCURS 0 is not allowed in OO concept.
Can anyone give me examples on declaring internal table in an ABAP Proxy(OO Concept).
Thanks
AK

Hi
Check this out.
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb3660358411d1829f0000e829fbfe/frameset.htm
Cheers

ABAP Server Proxy OR RFC - for attaching a file

Hello ABAP gurus,
Just to give a brief background, systems involved are ERP and PI
Certain Files (3 files to be exact) are generated in the ERP directory/file system
I need to transfer these files to PI "without" using the readily available FTP/NFS adapters (this is a limitation - no use of direct FTP is allowed)
Making the directory as a "shared" directory between ERP and PI is also not an option.
With the scenario above, I though of using an RFC or an ABAP Server Proxy to attach the said files to send them to PI
Which is the better way to do it?
I've seen a documentation for the ABAP Server Proxy that makes it possible to attach files to the proxy message, but for RFC I don't know if this is possible?
Your expert advise is highly appreciated

hI,
Use class CL_PROXY_CLIENT in the program and method IF_PROXY_CLIENT~EXECUTE.
You can refer documentation of this class as well as if you will search on any search portal using name of this class, you will get the briefe idea with the refernce procedure too.
Unfortunately I am unable to post you few links but try search on it, hopefully you will get it.
try below link.
<link to blocked site removed by moderator>
Edited by: Thomas Zloch on Oct 7, 2011 10:37 AM

Abap Server Proxy acknowledgment

Hi All,
Typicall scenerio FILE->PI->ERP(abap server proxy).
is there any possibility(excluding BPM) to request acknowledgment from erp to be sent to pi and fill second column in sxi_monitor. similar situation to aleaud in idoc processing..
BR
Maciej

is possible
take a loko to this.
http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
Acknowledgment Types
SYSTEM_OK
Positive system acknowledgment.
The receiver was reached successfully. For server proxies, this means that the implementing class for the server proxy was found and that the method for inbound processing could be called.

ABAP Server Proxy Issue

Guys,
For a scenario i am using ABAP Server Proxy.
I have successfully generated the proxy object but when i want to put some logic in server proxy by double clicking on execute_synchronous, i am getting nothing and when i am trying to use the toggle button to bring the proxy in editable mode i am getting the message that " you can't edit proxy objects ".
What is the solution....
Regards,

As sheetal said "Have you activated the proxy object properly ".
no i didn't ...
I went to SE24 and selected the class with my interface and activated it..
Process should be : Under Proxy Objects choose your interface and test .
It will show you the class needed to be activated..Finally i activated the class..
and get the ball rolling..
Thanx to Sheetal.
Regards,

ABAP server proxy- parser-item missing error

Dear all,
I am working on File to proxy scenario (ABAP server proxy).
When I executing my scenario, I am getting following error at call adapter pipline step .
 < SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSER">ITEM_MISSING</SAP:Code>
<SAP:P1>Envelope</SAP:P1>
<SAP:Stack>XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
I checked my message payload after message mapping it containing the perfect SOAP Envelop.
What may be the reason for the error?
Regards,
navneet.

navneet
is your path determined ok.
/sap/xi/engine?type=entry
 for SAP systems based on SAP BASIS 6.40 (XI 3.0 message protocol).
/sap/xi/engine?type=receiver
 for SAP systems based on SAP BASIS 6.20 (XI 2.0 message protocol).
http://help.sap.com/saphelp_nw04/helpdata/EN/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
Sorry forget my message, this is not applicable for you
Greets
Edited by: Patrick Pot on Feb 25, 2009 10:42 AM

HOW TO EXECUTE ABAP SERVER PROXY?

Hi,
I am working on a scenario in which message is passed from Integration Server to ABAP server proxy.
In case of client proxy we execute EXECUTE_SYNCHRONOUS methjod of proxy,but I am bit confused in case of server proxies.
How do we execute server proxy method?

Hi Similar to Client proxy, you will have the method EXECUTE_SYNCHRONOUS or EXECUTE_ASYNCHRONOUS for your server proxy. If your WebAS is based on 6.4 or above you can test the server proxy with a sample pay load very easily. In T-code sproxy, you will see a menu called proxy, Click on that and click test proxy, check the XML payload and you can enter the payload in the next screen and check your proxy..
Regards,
Jai Shankar.

Propagate fault message from ABAP server proxy to XI

Hello
My scenario is asynch HTTP -> async ABAP server proxy.
I have searched a forum but I didn't find the ansver on my question:
Is it possible to propagate a fault message from SAP system to XI in case of asyncronous ABAP Proxy in order to see in SXMB_MONI of XI?
I see errors only on SAP side but this solution doesn't satisfied me I want to see all errors in one place.

Hi,
Have u used commit work at the end of the code.
Can you please tell me what all configuration u have done.
U have referred the ABAP Proxy configuration:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Refer the below log for Client Proxy -
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Chirag

ABAP server proxy as web service provider ??

Hi friends,
I am wondering that if is possible to expose an ABAP server proxy as a web service on NetWeaver ABAP. I tried that, but failed to call it.
I generated a ABAP server proxy by using the PI inbound interface. I can call the ABAP server proxy by PI. From SOAMANAGER of the beckend system, i saw that this just generated ABAP server proxy is a service. Then i curious if this generated ABAP server proxy can be exposed as the web service like other RFC function modules on the same beckend system. So i generated a ABAP client proxy by using the binding WSDL of the ABAP server proxy. But the testing of the generated ABAP client proxy failed.
So my question is if it is possible to expose an ABAP server proxy as a web service on NetWeaver ABAP?
The beckend system is SAP ERP 6.0 EHP4. The PI is 7.11.
Thanks!

In other words, is it possible to consume a server proxy by client proxy? If yes, how to consume it?
Edited by: Chris Xu on Jan 16, 2011 8:59 PM

IDoc to ABAP Server Proxy scenario

Similar Messages

Maybe you are looking for