IDOC to FILE doubt

hi,
I am doing IDOC to FILE scenario.
and I have imported MATMAS.MATMAS05 to IR
and Mapped the following fields to the target message type
MaterialNumber
MaterialType
IndustrySector
MaterialGroup
OrderUnit
NameWhoChanged
Please explain me the following
1.
I want to know from where the data (from IDOC's segment ? / from Master data table ? / from message type?) will be transferred to Target File.
I need flow of data like when we activate the change list in ID. After that what happens in R3 part and XI part ?
I know IDOC is a data container. It contains segment and segment contain field. Field will have data. Then Idoc is a class and Idoc type is an instance and message type has what type of data is transferred in the IDOC type.
2.
Can I give value to some of the fields of MATMAS05 at XSD level, if yes how ?
Thanks
srinivas

HI,
Go thru this help to understand IDOc processing in IDOC adapter:
http://help.sap.com/saphelp_nw70/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm

I want to know from where the data (from IDOC's segment ? / from Master data table ? / from message type?) will be transferred to Target File.
>>>Idoc will be generated in the SAP system on some activities like Material Master creation etc, i.e data is sent from IDOC segment and corresponding fileds in the IDOC segment,
Can I give value to some of the fields of MATMAS05 at XSD level, if yes how ?
>>You can map any fields from the IDOC segment into Target Structure. probably not understood your question rite
Rgds,
Moorthy

Similar Messages

Mapping IDoc to File Doubt

Hello!!
I have send the IDoc CHRMAS.CHRMAS04 from my R/3 to another system via file adapter.
My problem is I have to pass several fields of the idoc to a complex structure on the XML with the structure:
<ITEM>
 <FIELDNAME>Weight</FIELDNAME>
 <FIELDVALUE>17.0 </FIELDVALUE>
</ITEM>
<ITEM>
 <FIELDNAME>Colour</FIELDNAME>
 <FIELDVALUE>Blue</FIELDVALUE>
</ITEM>
Somebody knows how to map for each segement of the IDoc an ITEM substructure?
I hope will be clear enough.
Thanks and regards,
Manuel.

And in which way is this workflow related?
Regards,
Martin

Error/Doubts in Idoc-XI-File scenario

Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.Jain

Hi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps .

Doubt in idoc 2 file scenario

Hi,
I want to create idoc 2 file scenario with out any Transformation.
In that case how/what to create Data type for receiver.
I want to receive the same idoc in the receiver folder/Directory (like XML file) with out any transformation.
Thanks
Ruban

Hi,
For this scenario you need to create the Data type structures as similar to IDOC type and just have to transfer to file without FCC.
It will transfer the IDOC data as it is in XML format
refer
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/error%2bhandling%2bin%2bfile-idoc%2bscenario
(Just avoid using FCC conversions on receiver file adapter in above scenarios)
Thanks
Swarup
Edited by: Swarup Sawant on Mar 24, 2008 6:15 PM

Problem in idoc to file scenario

hi
while creating the idoc to file scenario i am facing few problems.
1) My design time objects are working fine. i have checked my message mapping, message interface etc.. (all design time objects are in active mode).
2) In ID, i have tested my configuration in test configuration, its working fine there as well (in ID i am using 2 business service one for sender, one for receiver)
3) i am using my ecc6 training server as my sender and using my XI server as receiver.
4) i am sending idoc from ecc6 and converting it to file in XI server and saving it in XI server itself(my receiver in this case).
my error:
i send my idoc from we19 transaction, and i see a error message stating
that 'RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC'
my doubts.
1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
kindly help me with this issue.
regards
manoharan

>
manoj murugesan wrote:
> 1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
>
> 2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
>
> 3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
>
>
> kindly help me with this issue.
>
>
> regards
> manoharan
and to 1 & 2 ref. below,
Configuration steps required for posting idoc's(XI) -
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
ALE configuration for pushing idocs from SAP to XI -
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
3. NFS protocol is used to read/write files to the XI server itself. If you have to write to a local machine then use FTP

Issues in IDOC to File scenario using bussiness service

Hi Team
I found a blog which explains about the IDOC to FILE scenario by using bussinss services. I followed the steps and finally i am getting a error message while posting an idoc in we19 (ie IDOC 09878 was saved but cannot or should not be sent). The setting which have done on SAP side are as below
SAP SIDE CONFIGURATIONS
1. Created RFC destination : RFC_XI_SYSTEM
2. Created port : PORT_TEST
3. created logical system: IDOC2FILE
4. created partner profiles: IDOC2FILE
XI side configurations
1. Created RFC destination: RFC_SAP_SYSTEM
2. Created port : by using IDX1 t-code
DOUBT: here it is asking for PORT, CLIENT,Description and RFC destination, please let me know what values i need to put here, please find the SAP and XI system details below and suggest accordingly.
3. metadata: by using idx2.
DOUBT: here it is asking for IDOC type and source port, i can give the idoc name but i am not getting what i need to give to source prort field, please check and let me know, please find the SAP and XI system details below and suggest accordingly.
SAP system details
Client: 800
User name: sapuser
system id: DEV
system number:10
XI system details
Client:100
username:xisuper
system id: SXI
system numebr: 00
I request you to please check and help to successfullly completion of this scenario. I request you to please provide me the screen shots of the pre-requiste settings and suggest me the steps to debug the scenario.
Thanks in advance.
Raju

To complete your scenario successfully with better understanding of Idoc adapter
read http://help.sap.com/saphelp_nw70/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm.
for troubleshooting refer http://help.sap.com/saphelp_nw70/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm

IDOC to File scenario Configuraton settings

hi,
   I am doing IDOC to FILE scenario.I am sending IDOC from R/3 to XI and then to XML file.That mean smy scenario is as Follows ( R/3XIfile ) These are my queries
-->I have created RFC Destination from R/3 to XI.should I need to create RFC destination from XI to R/3 ( i mean In XI )??
-->I have created one Port in R/3 and I have linked that port with RFC Destination that i have created.here i am sending IDOC from R?# to XI...SO we call this PORT as SENDER PORT or RECEIVER PORT??
-->and DO we need to create PORT in XI also??is it require for my scenario??
-->DO we need to create Partner Profiles in XI also??
-->DO we need to create LOgical system in XI to represent the XI system?? (as we created LS in R/3 to represent sender system)
--->Here is my big doubt..
               when we test IDOC ..by sing we19 TCODE,
   We need to fill the corresponding details as below,
Receipent                                  Sender
Port                                              Port
PartnerNo                                      PartnerNo
PartnerType                                   PartnerType
my Doubt is,
-->>In which field we need to specify the Port that we have created in R/3..Receipent side OR Sender Side..?? and Why??
-->>Same for ParnerNo..where we need to specify the Logical system which we have created in R/3 should specify??Why??
Please give reply ASAP..with detailedexplanation..
points will be rewarded..
regards,
murali

HI
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You donu2019t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You donu2019t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD u2013 System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system names
cheers
reward poins if found useful

Does it mean.....IDOC - XI - File

Hi Experts,
I am very new to XI..
for IDOC to File
If IDOC resides at R/3 side then you don't require sender communication channel and sender agreement. Because it resides at Integration Engine. What does it mean?
My doubt is here if, File to IDOC
then same as like, you shouldn't require receiver communication channel and as well..Am I right??
Regards,
YRaj.

Hi,
IDOC Resides on ABAP Stack
RFC Resides on J2EE Stack
Here I Will tel u the Message Flow Behind this
When u r Using a RFC Adapter
First the adapter Shld Pic the Msg Using the RFC CC.
Then It will give the Msg to IE , the IE Can Post the Msg to IS Using the XI Adapter Internally.
So this is the Mechanism to post the Msg From Sender to IS---This is Onward journey
So If u Consider For IDOC Means
Here IDOC Resides on IE , So Here no Need of Adapter To Process the Steps so that IE can Receive the Msg.
So this is the Flow
Message Flow in XI----Please Go through this
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
Reward Points if Helpful
Regards
Sesh

Problem : Idoc to File Senario,overriding the segments in Idoc,on condition

Hello People,
Idoc to file senario.
There are fields in the Idoc which i want to populate, if that particular Idoc is going to XI. Can u tell me how can i check this condition .. ???

you dnt have control fro r/3 to check if the IDOC is reached to XI then XI creates the file then update few thing...
make sure the IDOC is reached to XI using the port if IDOC is using some port...but if the file is getting places in server using AL11 you can check that....in your condition you can check if file is exist in the target folder thn update .....insead of checking if IDOC sent to XI--XI creating a file...i doubt you have that flexibility...lets wait for other reply what they have to say?

Idoc-xi-file scenario. how to display file in html format

I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
Kumar

Hi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar

In idoc to file scenario, if XI system is down where do idocs pile up?

In idoc to file scenario, if XI system is down where do idocs pile up (get stuck)
what tcode can I use to reprocess it?

Sender System ,Check BD87 .. you will see alll the IDOCs in Yellow state ..
You can reprocess all the IDOCs in go from there .. if only they are in yellow state ...
regards
PS

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

Integration server as logical system in IDoc to file scenario

Hi,
Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice?
For which logical system will the outbound partner profile configured?
Regards,
Gajendra.

Hello,
I feel that the RFC destination linked to the port is the key here.
Because the scenario (IDoc to File) works in both the cases:
Case 1: Used the logical system as Integration server
Case 2: Used the logical system related to the file (third party) in the SLD.
In both the above cases the RFC destination points to the integration server.
Is this the case that in the XI scenarios (where IDoc are sent) the logical system name in the partner profile is just dummy and has not much significance??
It is the port that matters and once the Idoc reaches XI the routing takes place based on the configuration in ID.
Thanks.
Regards,
Gajendra.

How to suppress the Acknowledgement Error in IDOC to File scenario?

Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
Tirumal

Hi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy

While Idoc to File XI processing : data format change

Hi All,
need help.
I am processing idoc to file in a sscenario.
Here we have one field in Idoc is "Miscdata" Where we are passing one String with multiple spaces"
While this String goes to XI it remove the multiple space and make single space. I am not getting. how can I avoide.
I can not avoide it XI side. Here I am using substring to take different value from different position of the String which are fix.
Please help me in this

closing. thanks

IDOC to FILE doubt

Similar Messages

Maybe you are looking for