IDoc to File - error code 56

Hello,
I have configured the scenario for IDoc XI File. The IDoc from SAP system is triggered out properly, but at XI side by using we05 t-code i found that the IDoc received doesnot contain any data at all. The segment names have been changed and the error code is 56 and 60
56 status message is: External segment name & cannot be interpreted
60 status message is: Basic Type is missing.
I have checked the in idx2 the meta data have been imported properly and also verified the partner profile also both seems to fine.
Has anyone come across this situation, please do guide me to solve the issue.
Warm Regards
Ramesh P
Edited by: Ramesh P on Jul 17, 2008 6:43 PM

Thanks prateek for quick response!
The IDoc used is standard idoc WPDBBY.WPDBBY01.
and the cancel processing flag has been checked..
But still it error persists.. i am still able to see inbound idocs in we05 XI side, most of them told that in this scenario you wont be able to see it in we05 XI side. Then how to go about...
Edited by: Ramesh P on Jul 18, 2008 11:32 AM

Similar Messages

Crystal Server 2013: How to troubleshoot "Can not create temp file---- Error code:-2147215357"

We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?

Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

OraRRP Error with "Unable to copy data file;Error code 2, check disk space"

Hi,
Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
I check free space at both server and client side, they are very sufficient.
I also checked directory exists for REPORTXX_TMP variable.
My user call reports via URL (rwservlet) and it occur for all reports.
How I can solve this problem?
Thanks in advance.
Tawatchai R.

Hi,
have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
Thanks in advance. Axel

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

IDOC to FIle Error

Hi,
IDOC to File Scenario
Sender 1 IDOC, Receiver 3 Interfaces ( Munti mapping)
Then iam getting this error in MONI
<SAP:Code area="IF_DETERMINATION">NO_IIF_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to find an inbound interface</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards,
Rok

Hi Rakesh,
Possibly i think solution for this would be :
Go to SLD >>administration>>Content Maintainance and link the correct software component to the businesas system .
Then refresh the SLD cache this will automatically reflect there.
Also check the following thread it will help u:
Error in interface determination wiht condition
Regards,
Vinod.

IDOC to File --- Error occurred during back-routing Error in communication

Hi All,
I am doing a IDOC to File (File Content Conversion) Scenario in which I have mentioned the field separator and end separator.. When i trigger the IDOC, i am only getting the first field value in the output. I am getting the following error
"- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code>
<SAP:P1>,IHS_BS</SAP:P1>
<SAP:P2>,com_IHS_B07_BS,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error occurred during back-routing Error in communication channel</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>"
My port and receiver are mentioned in "IDXNOALE" so that I can ignore the Acknowledgments. Please help as the error still persists..
Thanks
Anju

Try this thread:
ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5

IDOC to FILE-Error during STOR/APPE epilogue

Hi all
I am doing IDOC to File scenario. When trying to save the file in FTP path it throwing error like
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error occurred while connecting to the FTP server java.lang.IllegalStateException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 221 Scanning for virus Transfer complete.

s i can able to connect FTP server from PI server...But it showing some message like
GSSAPI error minor: Unknown code krb5 195
GSSAPI error: initializing context
GSSAPI authentication failed
504 AUTH KERBEROS_V4 not supported.
KERBEROS_V4 rejected as an authentication type
But its getting connected..
Regards
Sathish

Cannot move/delete file, Error code -36

"The Finder can’t complete the operation because some data in “file name.png” can’t be read or written.
(Error code -36)
This is appearing as I try to move or delete a file on my external hard drive.
I am on OS X 10.10.1, The hard drive works perfectly, and is only 1 month old.
I am only using up 30% of the hard drive space.
No issues with my computer itself.
I am using a macbook pro and a seagate hard drive.
Any suggestions?
I have looked else where for solutions and most stated a dying hard drive and formatting (which I don't know how to do)
Thanks, Happy holidays

Hello johndamelio39,
Welcome to the Apple Support Communities!
It sounds like there may be a permissions issue with this file. If this is the case, please use the instructions in the attached article to set the permissions for this file to read and write. If this does not solve your issue, please let me know.
OS X Yosemite: Set permissions for items on your Mac
Apply permissions to all items in a folder or a disk
Select a folder or a disk, then choose File > Get Info.
Click the lock icon to unlock it, then enter an administrator name and password.
Click the Action pop-up menu , then choose “Apply to enclosed items.”
Have a great day,
Joe

IDoc to File - Error in Content Convertion?

Hi Guys!!
I am facing a problem.
I used to have an interfase working well, until i had to do a modification.
Scenario is iDoc to File
Header
num
Position
- - - - A
- - - - B
- - - - C
- - - - D
And now is
Header
- - - - num
Position
- - - - A
- - - - B
- - - - C (C is 1:unbound )
- - - - - - - C1
- - - - - - - C2
- - - - - - - C3
- - - - D
Since that, interfase does not workk anymore.
Any suggestion? Please!!
Thanks
Edited by: ademiv on Feb 9, 2012 1:03 PM

I am not facing mapping errors. Look!
http://img715.imageshack.us/img715/5932/20120209093317.png
With this before it was working
Header
num
Position
- - - - A
- - - - B
- - - - C
- - - - D
But now, with this structure is not working. Maaping is ok, i have already checked it.
Header
- - - - num
Position
- - - - A
- - - - B
- - - - C (C is 1:unbound )
- - - - - - - C1
- - - - - - - C2
- - - - - - - C3
- - - - D
Idea?

Moving files error code -1309

I am moving files off my desktop and onto an external drive and i keep getting an error code -1309. it happens randomly on some files and not others? any one know what this means and how I can get my files moved?
iMac G4
Mac OS 10.4.11
Quicktime 7.5.5

A drive or partition which is in the FAT32 format simply cannot accomodate files which are 4GB or larger regardless of how much space there is available on the drive.
(37494)

HELP! InDesign corrupting old files ERROR CODE 5

I have had Indesign for over a year and used with no problems until about a month ago. I created a flyer, saved and closed it and when i went to reopen it i got the error message saying: the file [filename].indd is damaged and cannot be recovered (Error code 5). I was frustrated because i had to redo it, but what is even more frustrating is that it seems like this is happening to EVERY file i open and close (old or new) which means I have lost a lot of large files (books in fact) because of some problem with indesign. I desperately need help to fix this. I work on w windows 8 computer using indesign cs6.

Would the font have to be used in the document that was opened? Do you know how i find a corrupt font?

LSMW: "Error in Uploading File" error code 6

Hi All,
I have created a simple LSMW project for deletion of Purchase Requisition in Development server. It is working as per the requirement there. But when I tried to Export the project and import it into our Production Server, system gives "Error in Uploading file".
Hence, I recreated the project in Production system. Here again when I reached the step "Read Data" the same error occured. I wanted system to read the Purchase requisition numbers from a text file which i have already mapped in the steps previous to " Read Data".
Also, system says "Error Code 6"
Can anyone please highlight possible causes of this error message?
Regards,
Vishal Data

Hi,
first you have to check TEXT file data - why because you are tested in Development server with test data , but that same test date not available in Production server na
prepare PR numbers from Production server -convert into Txt. format
while running LSMW - close all Excel file and Text file ,
at the time of Import and Export - system will start Specify Files- item - that time you will give Production data Text file then Upload
I think now you can't face any error
Mahesh

Error copying files, Error code -50

I have a G4 (OSX 10.3.9) networked with a eMachines Windows XP Home Edition (SP 2). I had sucessfully operated this network combination for approximately 1 year. Recently I experienced a permissions issue with the XP unit: A program I installed on the XP unit (Rosetta Stone) would not function due to a permissions issue. Unsuccessful at resolving the problem with Rosetta Stone, I re-installed Windows to regain permissions to run the program. This was sort of like pruning a rose with a chain saw; it worked, but it was not pretty.
I can now run Rosetta, but I can no longer (at the Mac) copy files from the Mac to the XP unit. I log into SMB as usual, open the "SHAREDDOCS" folder, and try to drag a file from the Mac desktop to this window. The resulting dialog box says:
"Copying "document" to "SHAREDDOCS"
Sorry, the operation could not be completed because an unexpected error occurred (Error code -50)."
How can I regain the use of copying files while at the Mac to the XP unit? I believe it to be a permissions issue on the XP, but I cannot find enough information to effectively troubleshoot this issue. What permission does the Mac have to satisfy in order to write files to XP? It's sort of lost in "no man's land" between Mac and Windows.
G4 Mac OS X (10.3.9)

It is "Read-only". I have been told in a Windows discussion group that the Read-only attribute is on by default for all Windows XP (Home Edition) folders. It cannot be removed; the system restores a user-removed read-only attribute on all folders.
However; my issue has been resolved. I cannot difinitively say what fixed the problem. There were some UDP ports I opened on the XP after reading some Apple Tech Articles, and after that my router needed rebooting, and now the issue has vanished. Sorry I can't report the fix, but I'm glad to be functioning again.
Thank you,
Jay Young

Can't save file: Error Code 0

I'm having trouble saving my files using InDesign CS5. The following message comes up: Cannot save... the file "DBTmp534-829951059" is damaged (error code: 0) (Also this affects saving my "Word" documents.) Please help! This project is due tomorrow! Thanks!
P.S. I tried to follow one of the prior suggestions I saw under troubleshooting, but couldn't find the file to delete.

This is a file problem, not something that is likey to be fixed by deleting anything. That's a very serious error, are you still able to open the file? If you can try exporting to .idml and see if that can be saved to a new name. See Remove minor corruption by exporting

IDoc to File - error code 56

Similar Messages

Maybe you are looking for