IDOC to File - FCC scenario

Hi Friends.
Scenario is in PI 7.0 . IDOC is received from SAP and after file content conversion placed in file server.
Suddenly few days back it started throwing error in receiver file FCC communication channel - error is -
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long (>3 for 27. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long (>3 for 27. column) - must stop', probably configuration error in file adapter (XML parser error)
but the same scenario with same inputs (same payload,same IR and ID configuration) works fine in development environment.
in SXMB_MONI message shows as SUCCESSFUL and payload is also OK.
Pls suggest what to do in this case..

Hi,
This is happening because - if there is any empty tag coming from source then target structure tag will not be created and because of which ur payload structure and FCC configuration is not matching.
I would recon use map with default between source n target strcture so in case source tag dont have value target structure will be created because of mapwithdegfault fuction and ur FCC will not fail.
Open SXMB_MONI output payload and compare the structre with Data type u will se for no source value target tag is not created at all and FCC is failed.
For exa- I ahve name,age,*** as my target data type and FCC is 10,3,4
If i dont receive age from source the value of *** is taken as 3 length as per FCC becus age tag is not created in target.
chirag

Similar Messages

IDOC to FIle (FCC)

Hi friends,
In Real time where we will normally use IDOC to File (FCC ) Scenario.
Could any one give some instance of this.

Hi,
>>>>In Real time where we will normally use IDOC to File (FCC ) Scenario.
whenever the receiver system can only handle flat files
or when the company is which we work tells us to do so
these are the only two scenarios when we will use FCC
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Idoc to File Split Scenario..

HI Experts,
My scenario is Idoc to File split scenario..
Idoc will be triggered from the SAP ECC system and at the target side we need to drop two text files at the ftp directory.
so Idoc data needs to be splitted and to be dropped in two differient files in the target FTP directory..
So can any one suggest how to go ahead with the scenario..
Thanks,
--Kishore.

Hi,
In the idoc, some of the data will go to onefile and some goes to other files..
the structures of the two files are differient..
There is no condinal spliting here every idoc contents should be mapped according to the requirement and dropped as two files.. at the target end.
for ex:
Idoc
field1
fileld2
field3
field4
in the out put side
file1 should contain
field1
field3
field4
file2 should contain
field1
field2
fileld3
This is what the requirement, if you are not getting reply back with your queries..
Thanks,
--Kishore..

Idoc to file(TXT) scenario

Hi all,
i'm working in a idoc-to file scenario. now its working fine and the file has been written in the target directory of the receiver .but its in xml format i need to store it in a TXT format.
In the receiver communication channel configuration i used file content conversion message protocal and also mentioned the FILETYPE as text and FILEENCODING as UTF-8. i maintained content conversion parameters also.
but still i'm getting the file in a XML format. it wouldbe very helpul if anyone could solve this one.
Thanks,
Hari

Hi,
Its really surprizing the to see even after maintaining all the parameters you are getting XML output.
Can you verify the receiv er end structure of Message type
and refer
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Thanks
Swarup
Edited by: Swarup Sawant on Feb 22, 2008 1:15 PM

Idoc-XI-file test scenario

i m new to XI,
i wanna make a test scenario for idoc-XI-file...
i donno what an idoc is.......
tell me how to create an idoc from the very basics....like message type, segment, partner profile, port creation, etc,..... and how to fire an idoc from the R3 system to my XI system,
and ofcourse... ican do the rest of mapping and all, with the file message type

Hi Sudeep,
1. steps for creating customized Idocs..
we31- creation of Segments
we30- creation idoc types
we81- creation of Message types
we82- assigning message type to Idoc type...
2. R/3 Configuration settings
SM59 - creation of RFC destination...
we20 - creation of Ports
We21 - Creation of Partner profiles..
3. XI Configuration settings
SM59 - Maintain RFC destination,
IDX1 - Maintaining port for XI
IDx2 - Loading the Idocstructure into metadata repository
These are the settings to be done before starting ur scenario..
I think this will help you... points...
regds,
vasanth.

IDOC to File scenario info

Hi Experts,
What all the important information we have to gather from client to do the IDOC to File(SML) scenario?
Thanks & Regards
Sara

Hii
Check this blog on IDOC to File. It states step by steps procedure for IDOC-File scenario:
Introduction to IDoc-XI-File scenario and complete walk through for starters.
In this blog u ll get information.
For troubleshooting of IDOC-File check this blog:
Troubleshooting File-to-IDOC Scenario in XI.
also for sending Collection of IDoc to Single File
IDOCs (Multiple Types) Collection in BPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Regards

Idoc to File(AS2)

Hi,
I am workingon IDOC to File(AS2) scenario.
When i execute the mapping in IR it executes succesfully and gives the data in the specified File format.
but when i test the interface, i am getting the output file in IDOC format where in it has to be in XML format in SXMB_MONI.
Kindly help me wiht his.
Regards

Hi,
The sender IDoc format is displayed in moni as output -
It shows that the conversion from IDoc to File is not done. Check the communication channelat the bot sender and receiver end.
If this is not the case then check the mapping which u have selected is the right one?
Regards,
Neethu

FCC in receiver side in idoc to file scenario

Hi all,
           I am doing an idoc to file scenario using FCC .I am using FCC in receiver side ,but i am getting my output file in only one line while i want structre to be seprated by new line.for more information i am giving muy file structre.
Record
    header(1to1)
    data    (0 to unbounded)
    footer (1to 1)          header, data, footer are three structre which contain various fields.I have to use fieldFixedLengths as filed separator. I am also using endseperator as 'nl' but its not coming in new line.Please share ur views on this issue.
Regards
Neha

hi neha,
In your scenario
Recordset Structure header,data,footer
header.fieldFixedLengths    = 1,2,3, whatever it is
data.fieldFixedLengths      = similar to header
footer.fieldFixedLengths    = similar to header
header.endSeparator = 'nl'
data.endSeparator = 'nl'
footer.endSeparator = 'nl'
I guess you dont have to do any thing else.
Regards
Pushkar
Message was edited by:
        Pushkar Anand

Doubt in idoc 2 file scenario

Hi,
I want to create idoc 2 file scenario with out any Transformation.
In that case how/what to create Data type for receiver.
I want to receive the same idoc in the receiver folder/Directory (like XML file) with out any transformation.
Thanks
Ruban

Hi,
For this scenario you need to create the Data type structures as similar to IDOC type and just have to transfer to file without FCC.
It will transfer the IDOC data as it is in XML format
refer
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/error%2bhandling%2bin%2bfile-idoc%2bscenario
(Just avoid using FCC conversions on receiver file adapter in above scenarios)
Thanks
Swarup
Edited by: Swarup Sawant on Mar 24, 2008 6:15 PM

Idoc-xi-file scenario. how to display file in html format

I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
Kumar

Hi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar

In idoc to file scenario, if XI system is down where do idocs pile up?

In idoc to file scenario, if XI system is down where do idocs pile up (get stuck)
what tcode can I use to reprocess it?

Sender System ,Check BD87 .. you will see alll the IDOCs in Yellow state ..
You can reprocess all the IDOCs in go from there .. if only they are in yellow state ...
regards
PS

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

Error/Doubts in Idoc-XI-File scenario

Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.Jain

Hi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps .

Integration server as logical system in IDoc to file scenario

Hi,
Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice?
For which logical system will the outbound partner profile configured?
Regards,
Gajendra.

Hello,
I feel that the RFC destination linked to the port is the key here.
Because the scenario (IDoc to File) works in both the cases:
Case 1: Used the logical system as Integration server
Case 2: Used the logical system related to the file (third party) in the SLD.
In both the above cases the RFC destination points to the integration server.
Is this the case that in the XI scenarios (where IDoc are sent) the logical system name in the partner profile is just dummy and has not much significance??
It is the port that matters and once the Idoc reaches XI the routing takes place based on the configuration in ID.
Thanks.
Regards,
Gajendra.

How to suppress the Acknowledgement Error in IDOC to File scenario?

Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
Tirumal

Hi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy

IDOC to File - FCC scenario

Similar Messages

Maybe you are looking for