Idoc-To-File-Material Master.

Hi,
Please let me know the Partner Type and Partner Function to create Partner Profile for Material Master data in SAP R/3 side.(Outbound).
Rgds
Ruchitha.

Hi,
This is expalined both the scenarios:
Please follow the below process for configuration:
Pre-requisites for Inbound IDoc to R/3 from PI:
Configuration required at Xi side:
Go to IDX1: configure the port.
Go to IDX2: load the DOC metadata.
Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
Configiration required at R3 side:
Maintain Logical System for PI (SALE transaction):
Maintain Partner Profile for XI system(WE20):
Pre-requisites for Outbound IDoc from R/3 to PI:
Configurations required in R/3:
Maintain Logical System (SALE)
Define RFC Destination (SM59) which points to PI system
Maintain Port (WE21)
Maintain partner profile. (WE20):
Maintain Distribution Model (BD64):
DO let me know if you need more information
Thanks and Regards,
Chirag Gohil.

Similar Messages

  • Bapi or IDOC  which create material master in ECC

    Hi Guys,
    Can any one let me to know by which function modules or Bapi or IDOC available to create material master in ECC?
    Regards,
    Veera

    hi,
    there are lot many ways of creating Mat master.
    1: you can go for idocs: /CWM/MATMAS_BAPI, /SAPSLL/MATMAS_SLL, ARTMAS, MATMAS..
    2: you can use LSMW batch method:
    Object               0020   Material master
    Method               0000
    Program Name         RMDATIND
    Program Type         D   Direct Input
    3: you can use BAPI as suggested above:
    Business Object      BUS1001006   Standard material
    Method               SAVEDATA                    Create and change materia
    Message Type         MATMAS_BAPI                 Create and change materia
    Basic Type           MATMAS_BAPI03               Create and Change Materia
    ags.

  • Updating Cnfigurable Material through IDOC to AFS material master

    Hi Guru's,
    Well i am trying to create a afs material through IDOC, i created all the views in the afs material master using /AFS/MATMAS type in WE19 and i got the result as well all the master data views came. But the thing is i am not able to pass the configurabile material in MRP3. As of , SDN or OSS note is saying that it is not possible to do that.
    I hope there will be some possiblities to get done it. It will be greatfull if any one provide the information about it.
    Thanks and Regards,
    Madhu.G

    Hi Gurus,
    Well my previous question about the creating configurable material through IDOC.?
    At last we find the solution for that, as in SAP OSS note says there is nopossibility in some way and also said that STD PD field was added wrongly in /AFS/MATMAS05.
    But the ultimate solution is we need to add a segment in the IDOC which contains the characteriastics will be updated automatically and  add up the segment E1CUCFG.
    Here is the solution:
    *add up the segment E1CUCFG
    Thanks & Regards,
    Madhu.G
    Edited by: madhu333mac on Aug 25, 2011 1:07 AM

  • User exit for idoc extension for material master (matmas05)

    Hello all,
    I have 10 custom fields added to anl idoc of basic type matmas05.
    i created a new segment under parent segment E1MARA1
    Now i want to find out the user exit where in i can write a code to read the data of this segment and populate into the data base table.
    Can anybody provide me with the name of the user exit?
    Regards,
    Roshani

    Check enhancement MGV00001 in SMOD.
    Exit Fm is EXIT_SAPLMV01_002
    Regards,
    Naimesh Patel

  • Control Material Master Views with IDOC load

    Hello all,
    I am wondering how best to control which views are available during IDoc processing for Material Master. 
    For example I just want the Basic Data 1 and Basic Data 2 tabs, I am only populating the relevant data and placing a value of u201CKu201D in the Maintenance Status fields.  This seems to work and avoids the warnings I seem to encounter when I neglect to add values for the Maintenance Status fields. 
    The warning I get at times tell me the IDoc is attempting to extend all available views, then it makes them available once I view my Material with MM03, however because there is no data in them I canu2019t go into the tabs.  That is fine because I can go to the Basic data tabs, but I was disappointed to see the other tabs enabled, but inaccessible.
    With Direct Input I used to be able to simply indicate which views I want.  Now it seems I must request the maintenance views that then translate to actual views.
    Please help.
    Thanks

    Yes I have experience in that area, and I fill the PSTAT as well. But you can also run a program (is in IMG > Logistic Gerneral > material master) to regenerate PSTAT after you have loaded all materials.
    I use IDOC loading method for SAP system mergers. Sent Material master in legacy system using ALE as IDOC collection to a file, then use this file as source for LSMW, and as IDOC to IDOC mapping is just 1:1 I use use this methd in this case.
    When loading from Excel file, I started using BAPI import method a few rollout waves back (but not because there is something difficult with IDOC, just to get used to this method).

  • Material Master MATMAS IDOC and base unit of measurement

    Hi
    We are using SAP standard material master IDOC type MATMAS05 to trigger IDOC. Our material master is having base unit of measure as "G". We are not using ISO unit of measurement. But Material master IDOC, segment E1MARM is populating base unit of meaurement (MEINS) as "GRM".
    Any idea why IDOC is picking ISO unit of measurement instead of material master base unit of measurement.
    Any idea how to send base unit of measurememt as "G" instead of "GRM" in DOC segment.
    Thanks
    Nilesh

    There are ISO codes for country keys, currency keys, units of measure and shipping instructions. According to SAP design guidelines, you should use ISO codes for an IDoc if they are available. When you set up the IDoc, the SAP codes have to be replaced by ISO codes.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf

  • Material Master IDOC MATMAS05 and unit of measure

    Hi
    We are using SAP standard material master IDOC type MATMAS05 to trigger IDOC. Our material master is having base unit of measure as "G". We are not using ISO unit of measurement. But Material master IDOC, segment E1MARM is populating base unit of meaurement (MEINS) as "GRM".
    Any idea why IDOC is picking ISO unit of measurement instead of material master base unit of measurement.
    Any idea how to send base unit of measurememt as "G" instead of "GRM" in DOC segment.
    Thanks
    Nilesh

    Thats the way it works.  In any interfacie to or from  external sys. , it uses the ISO code from CUNI instead of the UOM .

  • Exclude Material Master views in IDoc

    Hi,
    I am using the MATMAS04 IDoc to replicate material master data from one client to another (two clients in the same system). I need to exclude the MRP I-IV views and the Storage Location views - except for these views the data in all other views should be replicated in the target client. Is there a way to just disable the data for these views in the Idoc? I have checked the various segments, but was not able to find any flag/field to disable views selectively.
    Please help.
    thanks,
    ram.

    Hi Ram,
    I am not familiar with Idoc type MATMAS04. I guess you are using a later version of R3.
    However there is a segment filtering functionality for IDocs which you can use.
    As an example , I will use IDoc Type MATMAS03. This idoc type has a segment E1MVKEM which stores the Sales View data for the material. This segment is not a mandatory segment and hence it can be filtered when sending the idoc downstream.
    In BD64, for the distribution model, create a filter. The filter should be set to check the contents of Sales Org  field. Then set the filter to a value which you are never expecting to find in VKORG field.
    What happens is this: A master idoc will be created with all the views ( meaning all the segments ). During the filtering stage, the filters set up in BD64 will be checked. If the Sales Org in the idoc does not match the Sales Org in the Filter, the E1MVKEM segment will be deleted in the idoc.
    A similar approach could be used for the MRP views and Storage Location views in your idoc.
    Thanks,
    Urmila

  • Hi, IDOC Material Master upload

    Hi
    I am working on LSMW IDOC Method for MAterial Master
    when i process the idocs.. the idocs are generated and are not getting processed showing 51 - Idocs are not processesd as the idoc packets has errors..
    i am not able to debug it.. can anyone help me how to find the error and locate the particular segment..
    if any one had faced such error previously can you help me out in solving this..
    Thanks in advance
    Guhapriyan

    Hi Guhapriyan,
    I think you might be in the wrong forum, but since I am reading here goes. One or more of the idocs in the packet fails, so all will fail. You can eliminate this by setting the packet size to 1 when processing the idocs in LSMW. Alternately, use BD87 to view the idocs and reprocessthe failed ones. They will process individually so you can locate the error messages. MATMAS idocs will generate an success/failure log which you can drill to directly from the idoc in BD87 by double clicking the idoc status record or via trans SLG1. You can also capture the idoc number and process/debug from WE19 but should not need to unless you have implemented CMODs or BADIs on the MATMAS idoc.
    Hope that is of some help,
    -Lew

  • Uplaoding material master with LSMW

    Hi,
           I want to  create new 1000 material , i want to know the process for uplaaoding sales text and purchase order text is it  possbile with normal recording or for text uplaoding i have to folow different procedure,
      regards,
       zafar

    you should never load materials by recording method. Use standard/direct input method, BAPI or IDOC method.
    Material master is too dynamic to use a static recording.
    However, in any method it is possible to load texts.
    Texts can even be loaded with an extra LSMW import method after material master load.

  • Material Master download to file using Idocs

    I need to download Material Master to Application server or local PC using Idoc's. Is there a way to achieve this?

    Hi,
        You can use the userexit available in material master outbound function module to download the data into file and trigger an event which can call a workflow that by default set the status of the IDoc to not to be processed 31 or configure new status 28(as IDoc being monitored) and use the workflow to view the material file and release the IDoc if OK by resetting the status to 30 or mark it for deletion or as error by setting it to 31.
    Sirish

  • Error while creatting the Material Master IDOC in ERP 2005

    Hello All,
    I am trying to create scenario from RFID-Enabled Outbound Processing - Conf Guide (SAP AII 4.0).
    I am using Auto ID 4.0 on a NW04s system. The backend is a ERP2005 system.
    The scenario requires that I need to create a material in the backend and send it to the NW04s system using IDOCs.
    After completing the configuration on the backend, I tried sending the Material Master IDOC to Auto ID from the transaction AIDMM. I get a message that IDOC is just being created. But I could not find it in the transaction WE02.
    On debugging I found that the function MARD_GENERIC_READ_MATNR_PLANT resulted in error.
    Thanks for any kind of input.
    Regards,
    Rahul
    Message was edited by:
            Rahul Gavande

    Dear,
    Check ABAPer for file settings.
    - CANNOT_SKIP_ATTRIBUTE_RECORD : The attributes could not be read in the EPS parcel. The file cannot be opened for reading, because it may have been deleted in the meantime.
    - CANNOT_DETERMINE_EPS_PARCEL : The EPS parcel is not in the EPS Inbox, because it may have been deleted. You must download the relevant patch again (for example, Hot Package).
    - CANNOT_DETERMINE_DATA_FILES : The name of a data file could not be determined, because a profile parameter was not correctly configured. Check the settings using the report RSPARAM.
    - CANNOT_DISASSEMBLE_R_DATA_FILE : An R3trans data file could not be unpacked. A possible error source is that the relevant EPS parcel was not found. The data file could not be opened for writing. An error occurred when transmitting a 20K block from the EPS Inbox to the directory /usr/sap/trans/data (UNIX).
    - CANNOT_DISASSEMBLE_D_DATA_FILE : An ADO data file could not be unpacked. The reasons are the same as with the message CANNOT_DISASSEMBLE_R_DATA_FILE .
    - CANNOT_CREATE_COFILE : The cofile could not be created from the relevant data file. One possible error source is that <sys>adm does not have write authorization for the directory /usr/sap/trans/cofiles (UNIX).
    Check Note: 70752.
    Regards,
    Syed Hussain.

  • Problem with mass IDoc for Material Master

    Hi All,
    Can anyone suggest a solution to work with mass IDocs for Material master?
    We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
    Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
    Regards
    Pooja

    Hello Pooja:
    The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
    In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
    However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
    The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
    Hope this helps.
    Regards,
    Jorge.

  • Material Master data transfer using IDOC

    Hi,
    I am working on integration scenario with SAp ECC. we are using SAp PI wherein SAP PI is posting data In SAP ECC using standard IDOC for Material master i.e MATMAS05
    You might be aware that while material master creation if we pass Plant value then we can activate all Plant related views i.e. Purchasing, sales plant general, MRP views and Accounting etc...
    I have a scenario where I want to activate only Sales plant general view...donot want MRP and purchasing views to get activated
    I tried passing only Plant and profit center value which required for sales plant general data view and keeping all other fields blank but it doesnot work.
    can you suggest a way.
    Cheers
    Rc
    P.s - I am using xml file which will be converted into IDOC by PI.

    you must not create all segments in the IDOC  if you dont want the views.
    e.g. E1MBEWM is used for the accounting data. without this you wont get that view.

  • LSMW IDOC MATMAS05 Material Master

    Hi Experts,
    Actually ,Iam using IDOC method in LSMW for Material Master Upload.
    For that Iam using the IDOC type MATMAS05 .
    So in the input file when Iam not the giving the Material Number IDOC is getting failed
    with status 51 and giving the errors that "NO MATERIAL NUMBER
    TRANSFERED".
    And
    if Iam giving a material number in the test file it is again getting failed
    giving the error " The material does not exist ".
    I am not able to understand what iam missing here.
    Other than this Iam passing all the mandatory fields required .
    Also in the each segment iam passing the MSGFN = '009'. i.e. to create.
    Pls help.
    Thanks in Advance.
    Regards,
    Mithun

    Hi Chuin,
    This forum doesn't provide specific info on LSMW. You may check https://service.sap.com/lsmw for more info.
    Regards,
    Markus

Maybe you are looking for