Idoc to file Scenario not working

Hi ALL,
I have created one Idoc -XI-File scenario.I have done all the preconfiguartion in Backend and XI.
Now when i am testing in we19, it is showing that Idoc is sent and saved in the database but when i am going to sm58, there it is showing Status field "No service for system SAPSAI, client 800 in Integration directory
Can anybody tell where i am going wrong???
Thanks in Advance
Regards
Vikas

Hi,
Now i am able to see the message in sxmb_moni , it is showing Green status, but still am not getting the file in reciever side.
In communication channel monitoring it is showing green status,but not giving any messages theres
Any suggestions what do to next to get the file??
Thanks
Regards
Vikas
Message was edited by:
Vikas Agarwal

Similar Messages

Simple File to File scenario not working

Hi all,
I am new XI, please help me out, I am getting this error when i am monitoring the message
2006-02-08 17:59:09 Success Channel DEMO_CC_S: Send binary file "D:\Input\nagesh_input.txt". Size 190 with QoS EO
2006-02-08 17:59:09 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-02-08 17:59:09 Success Trying to put the message into the send queue.
2006-02-08 17:59:09 Success Message successfully put into the queue.
2006-02-08 17:59:09 Success The application sent the message asynchronously using connection AFW. Returning to application.
2006-02-08 17:59:09 Success File "D:\Input\nagesh_input.txt" deleted after processing
2006-02-08 17:59:09 Success The message was successfully retrieved from the send queue.
2006-02-08 17:59:09 Success The message status set to DLNG.
2006-02-08 17:59:09 Error Transmitting the message to endpoint http:
sapnet:8000/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 501..
2006-02-08 17:59:09 Success The asynchronous message was successfully scheduled to be delivered at Wed Feb 08 18:04:09 IST 2006.

Hi Nagesh,
this thread is the solution to your problem.
No Adapters showing in Adapter Monitor
go thro this thread also
XI Installation : No adaters(except JPR) visible in Adapter framework
as given in the above threads to import take a look at:
Importing the XI Content for Software Component Version SAP Basis 6.40 SR1 from
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/sap xi 3.0 sr1 installation guide.pdf
think these links has full info to solve your problem.
regards,
P.Venkat
Message was edited by: venkataramanan

Error Resource not Found in SXMB_MONI while doing IDoc to File Scenario

Hi Experts,
I am doing IDoc to File Scenario and I am facing Following Error in SXMB_MONI,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>193c0e01-bd37-11dd-850c-d879ac131b1f</SAP:P1>
<SAP:P2>http://clarityPOC</SAP:P2>
<SAP:P3>com/sap/xi/tf/_MM_Timesheets_iDocToFile_.class</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have tested the same file in test tab of mapping, execution of mapping is successful there.
Regards,
Nitin Patil
Edited by: Nitin Patil on Dec 5, 2008 7:09 AM

Hi Dharmveer I have done the cache refresh ID in XI Data Cache Refresh using link
http://sapnbipoc:50000/rep/support/admin/index.html
but still same error persisting
and in Integration Builder> Environment>Cache Status Overview >Problem tab
following error (initial part of the error pasted) is shown
Thrown:
com.sap.aii.ib.bom.landscape.SLDElementNotFoundException: Adapter Engine af.npi.sapnbipoc not found in SLD
     at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:56)
     at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:41)
     at com.sap.aii.ib.server.abapcache.logons.IR_LogonData.<init>(IR_LogonData.java:26)
Regards,
Nitin Patil

Integration server as logical system in IDoc to file scenario

Hi,
Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice?
For which logical system will the outbound partner profile configured?
Regards,
Gajendra.

Hello,
I feel that the RFC destination linked to the port is the key here.
Because the scenario (IDoc to File) works in both the cases:
Case 1: Used the logical system as Integration server
Case 2: Used the logical system related to the file (third party) in the SLD.
In both the above cases the RFC destination points to the integration server.
Is this the case that in the XI scenarios (where IDoc are sent) the logical system name in the partner profile is just dummy and has not much significance??
It is the port that matters and once the Idoc reaches XI the routing takes place based on the configuration in ID.
Thanks.
Regards,
Gajendra.

PI 7.1 scenario -- File to File , File to IDOC and IDoc to File Scenario

Hi All,
*I have PI 7.0 . I have in that File to File , File to IDOC and IDoc to File Scenarios*
File to File -- This scenario is working fine.
File to IDOC -- Setting done in PI 7.0 like SM59, IDXI, IDX2 and in R/3 like SALE (logical system)--- This scenario is working fine.
IDoc to File -- Seeting done in R/3 like SALE (Logical system, Distrubtion Model (Port, Partner Profile)) -- This scenario is working fine.
Now I need to move to PI 7.1 -- for File to File , File to IDOC and IDoc to File Scenarios.
Please let me know do I require to make any changes in Design and Configuration and settings in PI 7.1 and R/3 for above scenarios or it will work fine as it is already working for PI 7.0
If changes are required please let me know what changes to do for each scaenario and pls also send blogs for that.
Regards

>
Rickkk wrote:
> Hi,
>
> Idoc metadeta is updated through idx2?
>
> Regards
If there is no metadata maintained for an idoc type, the metadata for that idoc type gets loaded when an idoc of that type is received by PI for the first time. If you are looking at loading metadata of all idoc types before the first run, its really not required. Just make sure that the port is configured properly. Although, there is no harm in preloading the metadata using IDX2.
You need to use IDX2 mandatorily when the the metadata changes and the metadata in ECC and PI is different. In that case, you need to delete metadata for the changed IDoc type and then either you can update the metada through IDX2 or let the system take care of.

Error in IDoc to file scenario

Hi Experts,
I am working on IDoc to File scenario.IDoc is sccessfully reached XI.In SXMB_MONI it is showing error in request mapping.Error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please suggest me in this issue.
Thanks,
Bhuvan.

Check this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/bb/ad1c3d2b058c4ce10000000a114084/
You might want to refer to the SAP NOTE: 316877
Regards,
Ravi

Issues in SAP(Idoc)-XI-File scenario

Dear All,
I am working on SAP(Idoc)-XI-File scenario. But in the Receiver agreement i am not able to see the idoc in order to specify some conditions there.
Please suggest if I have to do any settings in order to specify some conditions in the idoc.
Warm Regards,
N.Jain

Hi nishu jain ,
U can specify the conditions in Reciever Determination.
1.Go to Scenarios
2.Choose your business scenario
3.Click Service without party
4.Double click Reciever Determination
5.U wil get screen in which there is a option called Configured Recievers.
6.Click there.then u wil get the screen with
Left Operand Op Right Operand
7.There u can specify the condition.
Reward points if u find this useful.......
Regards,
gyanaraj

Idoc-to-File Scenario ATTRIBUTE_INV_SND_SERV Error

Hi All,
I am working on PI 7.1. I have an Idoc-to-File scenario. The scenario is working fine, but there is an error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>FILE_BC</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to convert the sender service FILE_BC to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
PI is trying to send an acknowledgment back to the Sender ECC system. But in the IDX_NOALE, 'Do not request acknowledgement' is already checked. Still there is this error. It doesnt show up in MONI unless the Acknowledgement message is clicked, but alerts are getting triggered for these cases. Can anybody please help me in resolving this? I do not want the acknowledgements to be sent back to the ECC system.
Thanks,
Geetha

Thanks everybody! It has got fixed. I just requested No acknowledgements.
Geetha
Edited by: Geetha on Nov 11, 2009 5:45 PM

IDOC to File Scenario. Acknowledgement help required

Hi All,
I have made a IDOC to file scenario (IDOC has business system and file has business service) which is working fine.
But In sxmb_moni of XI it says Acknowledgement not possible.
"<SAP:Stack>Unable to convert the sender service File_Receiver_BusService to an ALE logical system</SAP:Stack>"
Please explain me and send be blogs to send Acknowledgement back to R/3.
Regards

Hello Rick,
"<SAP:Stack>Unable to convert the sender service File_Receiver_BusService to an ALE logical system</SAP:Stack>"
Check the Logical system name in SLD and in ID's Service->AdapterSpecific Identifies matches are not, go through the following link for step by step prcedure.
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Check this for providing Acknowledgments.
https://wiki.sdn.sap.com/wiki/display/ABAP/HandlingIdocAcknowledgements
Regards,
Prasanna

IDOC to File Scenario - Configuration steps need to be done in R3 and XI

Hi Experts,
I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too.
Thanks in advance.
Regards,
Sree

Hi Sree,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this answers your query.
Regards,
Abhy Thomas

ABOUT DATA SENDING IN idoc TO file SCENARIO

How the data is sended in idoc to file scenario?
what is the difference in sending data through BD10, BD14 and WE19 ?
Is the data is sended through XI OR R/3 SYSTEM?

Hi Rammohan
>> How the data is sended in idoc to file scenario?
     Makeing settings in SAP R/3 side then based on the RFC
     destination,port,parterner profiles.....
     Idoc can hold the data with out any direction but RFC port will direct where to
    go ...based on the partner profiles (Out buond IDOCS)
>>what is the difference in sending data through BD10, BD14 and WE19 ?
    BD10,BD11,BD12,BD13,BD14 will be to send the master data automatically
    generally will be in the production(But not for testing) and this will be depending
    on the declaration of profiles in the BD64
    --- But we19 will be used to test the Idocs with any data
        but here we need to give all the parameters like senders,receivers,ls,idoc...
>> Is the data is sended through XI OR R/3 SYSTEM?
     Data will send through XI i.e XI will receive the Idoc and Convert into XI specific
     SOAP XML message and process all the pipe line steps ...based on the target
     it will send
     Here target is file so choose the file adapter as target and give all parameters
     it will work fine
I hope this will answer your question
regards
--- prasad

No message in found in XI in IDOC to FILE scenario

Hi everybody,
I am working on a scenario idoc to file. The idoc is sent sucessfully from R/3 , but I am not getting any message in message monitoring in XI.Can anybody help me on this?

Hi Bhagyashree,
Just see if the file is generated at the specified destination....
Meanwhile please go through the info below and cross check with what you have done...
i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
I hope this answers your query.
Regards,
Abhy

Seeburger IDOC-to-File scenario: Error using Classifier module

Hello,
I am running the following scenario: ORDERS.ORDERS05 IDOC -> XI -> X12 850 4010 File.
In the file receiver channel, I am using Seeburger's Classifier and BIC modules as follows:
localejbs/SeeClassifier        classifier
localejbs/CallBicXIRaBean      bic
CallSapAdapter                 0
classifier   attID             classifierAtt
classifier   destSourceMsg     MainDocument
classifier   showInAuditLog    true
bic          classifierAttID   classifierAtt
bic          destEncoding      UTF8
bic          destSourceMsg     MainDocument
bic          destTargetMsg     MainDocument
bic          mappingName       AUTO
bic          newLine           true
bic          srcEncoding       UTF8
After conversion in XI, the file fails to write to the folder because of this error:
Message processing failed. Cause: javax.resource.ResourceException: ---
Conversion of synchronous request from module chain ended with errors
---Error: [Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping:
See_XML_AnsiX12 you are trying to load cannot be found in the classpath!
Maybe you forgot to compile or to activate the mapping! DESCRIPTION:
BICMapping Error: The mapping [not specified] you are trying to load cannot
be found in the right path! Maybe you forgot to compile or to activate the
mapping!
When I set the mapping directly to See_X2E_AnsiX12_850_V4010 instead of using the Classifier module, the configuration works fine. But I want to design the receiver channel to be able to receive all types of EDI messages coming from XI.
I am only facing this problem for the IDOC-to-File scenario. Somehow the same configuration works for a File-to-IDOC scenario.
I talked to our Basis team and they said that the map See_XML_AnsiX12 does not exist in Seeburger's delivered content, although I believe that it should be. Has anyone encountered this problem before?
Any suggestions would be appreciated.
Thanks,
Arianne

Hi Yomesh,
Here is the payload.
<?xml version="1.0" encoding="UTF-8"?>
<LIST>
<S_ISA>
    <D_I01>00</D_I01>
    <D_I02/>
    <D_I03>00</D_I03>
    <D_I04/>
    <D_I05>ZZ</D_I05>
    <D_I06>CELORGS01</D_I06>
    <D_I05_2>ZZ</D_I05_2>
    <D_I07>AVX</D_I07>
    <D_I08>032008</D_I08>
    <D_I09>1718</D_I09>
    <D_I10>X</D_I10>
    <D_I11>00401</D_I11>
    <D_I12>000000008</D_I12>
    <D_I13>0</D_I13>
    <D_I14>T</D_I14>
    <D_I15>^</D_I15>
    <S_GS>
      <D_479>PO</D_479>
      <D_142>CLS01</D_142>
      <D_124>058895921</D_124>
      <D_373>20080320</D_373>
      <D_337>1718</D_337>
      <D_28>8</D_28>
      <D_455>X</D_455>
      <D_480>004010</D_480>
      <S_ST>
        <D_143>850</D_143>
        <D_329>800001</D_329>
        <S_BEG>
          <D_353>00</D_353>
          <D_92>SA</D_92>
          <D_324>4500005037</D_324>
          <D_373>20051110</D_373>
        </S_BEG>
        <S_CUR>
          <D_98>BY</D_98>
          <D_100>USD</D_100>
        </S_CUR>
        <S_FOB>
          <D_146>CC</D_146>
          <D_309>OR</D_309>
          <D_352>FREE CARRIER</D_352>
          <D_334>02</D_334>
          <D_335>FOB</D_335>
          <D_309_2>DE</D_309_2>
        </S_FOB>
        <S_ITD>
          <D_336>01</D_336>
          <D_333>3</D_333>
          <D_351>45</D_351>
        </S_ITD>
        <G_SN9>
          <S_N9>
            <D_128>L1</D_128>
            <D_369>GEN</D_369>
            <S_MSG>
              <D_933>TEST</D_933>
            </S_MSG>
            <S_MSG>
              <D_933>MESSAGE</D_933>
            </S_MSG>
          </S_N9>
        </G_SN9>
        <G_SN1>
          <S_N1>
            <D_98>BY</D_98>
            <D_66>92</D_66>
            <D_67>6310</D_67>
            <S_PER>
              <D_366>BD</D_366>
              <D_93>Graham Crawford</D_93>
            </S_PER>
          </S_N1>
        </G_SN1>
        <G_SN1>
          <S_N1>
            <D_98>BT</D_98>
            <D_66>92</D_66>
            <D_67>6310</D_67>
          </S_N1>
        </G_SN1>
        <G_SN1>
          <S_N1>
            <D_98>SE</D_98>
            <D_93>3M COMPANY</D_93>
            <D_66>92</D_66>
            <D_67>0000019591</D_67>
          </S_N1>
        </G_SN1>
        <G_SN1>
          <S_N1>
            <D_98>ST</D_98>
            <D_93>SAMPLE</D_93>
            <D_66>92</D_66>
            <D_67>6310</D_67>
          </S_N1>
        </G_SN1>
        <G_SPO1>
          <S_PO1>
            <D_350>00010</D_350>
            <D_330>10.000</D_330>
            <D_355>EA</D_355>
            <D_212>10</D_212>
            <D_639>PE</D_639>
            <D_235>BP</D_235>
            <D_234>230-1812-01JDS</D_234>
            <D_235_2>EC</D_235_2>
            <D_234_2>A00000000000002</D_234_2>
            <G_SPID>
              <S_PID>
                <D_349>F</D_349>
                <D_352>TIE WRAP,LOCKING,PANDUIT-PLASTIC PART C</D_352>
              </S_PID>
            </G_SPID>
            <S_REF>
              <D_128>CO</D_128>
              <D_127>4500005037-00010</D_127>
            </S_REF>
            <G_SSCH>
              <S_SCH>
                <D_380>10.000</D_380>
                <D_355>EA</D_355>
                <D_374>002</D_374>
                <D_373>20051208</D_373>
              </S_SCH>
            </G_SSCH>
          </S_PO1>
        </G_SPO1>
        <G_SCTT>
          <S_CTT>
            <D_354>1</D_354>
          </S_CTT>
        </G_SCTT>
        <S_SE>
          <D_96/>
          <D_329>800001</D_329>
        </S_SE>
      </S_ST>
      <S_GE>
        <D_97>1</D_97>
        <D_28>8</D_28>
      </S_GE>
    </S_GS>
    <S_IEA>
      <D_I16>1</D_I16>
      <D_I12>000000008</D_I12>
    </S_IEA>
</S_ISA>
</LIST>
Thanks,
Arianne

Problem IDOC to File scenario: No service for system SAPIDC, clnt in ID

in IDOC to File scenario, when IDOCis triggered from R/3 to XI, it gives error in SM58 transaction
"No service for system SAPIDC, client 800 in Integration Directory"

In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;

Testing of Idoc to file scenario

Hi Gurus,
I have completed the Idoc to file scenario, But how should I test the whole scenario??!!
Because of my functional guy is absent for this week and I do want to test my scenario, whether its working properly or not??!!
Note: As I knew, we19 tcode, it asks some Idoc number and other info to do the same.. could you please help me out?!!
Thanks.,
Stallin

Hi
Just for testing purpose..you can use WE19..
First goto transaction WE02 and put Basic type : MATMAS03 as filter criteria, change your creation date to select little old idocs and run...on next screen your will see number of idocs "MATMAS03" with green status(if there is any in that period..otheriwse change period again).
Then goto WE19 and put existing idoc number in the field existing idoc and and presss F8...On next screen press "Standard outbound processing".
Can also use we19 and change control record ( Double click in EDIDC segment) to your sender / recever partner profile.. and run
Thanks

Idoc to file Scenario not working

Similar Messages

Maybe you are looking for