IDOC to file scenario testing error --

Hi experts ,
When doing an IDOC to file scenario the status of the IDOC in XI (the Trace section @ SXMB_MONITOR) shows that
PARTY &SERVICE NOT DEFINED
the failure occurs at message splitting stage .
more details :
the sender is represented as a business system
the receiver has no party and has only a business service
By chance when i tried to check message status in INTEGRATION ENGINE @ RWB
i was able to find that XI is trying to send the mesasage to Receiver with party name 12345 this 12345 is the same which i gave in we20 as the partner number .
What could be the reason ?

This is the error
Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party 0000002569 and receiver service</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) 0000002569 DELINS.DELFOR01</Trace>

Similar Messages

Idoc-to-File Scenario ATTRIBUTE_INV_SND_SERV Error

Hi All,
I am working on PI 7.1. I have an Idoc-to-File scenario. The scenario is working fine, but there is an error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>FILE_BC</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to convert the sender service FILE_BC to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
PI is trying to send an acknowledgment back to the Sender ECC system. But in the IDX_NOALE, 'Do not request acknowledgement' is already checked. Still there is this error. It doesnt show up in MONI unless the Acknowledgement message is clicked, but alerts are getting triggered for these cases. Can anybody please help me in resolving this? I do not want the acknowledgements to be sent back to the ECC system.
Thanks,
Geetha

Thanks everybody! It has got fixed. I just requested No acknowledgements.
Geetha
Edited by: Geetha on Nov 11, 2009 5:45 PM

XI: idoc 2 file scenario( Contain error in SM58)

Hi experts,
Here i am having one issue. i have done Idoc 2 file scenario...i have created material in R/3 successfully. when i have sent the material to legacy system..Idoc was generated Successfully in r/3 but i haven't seen that message in SXMB_MONI..
i got the error message in SM58 i.e. IDX1 port SAPDE1, Client 220, RFc Destination Contain error.
plz any one can u help me on this....
Regards,
Yadav

Hi Yadav,
The RFC port you defined is not correct in IDX1. The Port name must be in the form of u201CSAPxxxu201D, where xxx is the system ID of the backend SAP system.
Just cross check it.
Check this for more details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards,
Sachin

IDOC 2 FIle Scenario BD64 error ?

Hi Experts
While Create Distribution Model (BD64)
Sender System u2013 R3XCLNT100 (RFC Destination From XI)
Receiver System u2013 XIRCLNT100 (RFC Destination Form SAP )
Message type - MATMAS
While selecting Sender System and Receiver System it showing only (XIRCLNT100 RFC Destionation Only) But i unable to see the RFC Destionation From XI ( R3CLNT100). Can any body help me out.

Hi,
Please check whether you followed the coorect steps while configuring the ALE
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/sapR3%2528Idocs%2529ToXI--Steps+Summarized&
Thanks,
Tiny
Edited by: TINY MAMPILLY on May 11, 2009 7:23 AM

Idoc to file scenario error

Hell Experts,
I have done desgin and configuration from Idoc to File Scenario in XI Intergration server.
Source is R/3 and Target system is File. I have successfully configured each and every step. Send Idoc from R/3 to Intergration server and run sxi_cache. But I didn't get successful results, always the error message shows in SXMB_MONI as follows:
Ackn Status contains system error
During the application mapping com/sap/xi/tf/_CUST_MMAP_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeExcep
tion in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
My system Patche level as follows:
SAP_BASIS     640        0012        SAPKB64012
SAP_ABA     640     0012                SAPKA64012
PI_BASIS     2004_1_640 0009        SAPKIPYI69
SAP_BW     350     0009                SAPKW35009
The above error is related to patches problems or any Mapping problems ?
Please help me.
Advanced Thanks.
Regards,
Chandra

Hi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
i am not sure of the patch levels.
Regards,
Anirban.

Error Resource not Found in SXMB_MONI while doing IDoc to File Scenario

Hi Experts,
I am doing IDoc to File Scenario and I am facing Following Error in SXMB_MONI,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>193c0e01-bd37-11dd-850c-d879ac131b1f</SAP:P1>
<SAP:P2>http://clarityPOC</SAP:P2>
<SAP:P3>com/sap/xi/tf/_MM_Timesheets_iDocToFile_.class</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have tested the same file in test tab of mapping, execution of mapping is successful there.
Regards,
Nitin Patil
Edited by: Nitin Patil on Dec 5, 2008 7:09 AM

Hi Dharmveer I have done the cache refresh ID in XI Data Cache Refresh using link
http://sapnbipoc:50000/rep/support/admin/index.html
but still same error persisting
and in Integration Builder> Environment>Cache Status Overview >Problem tab
following error (initial part of the error pasted) is shown
Thrown:
com.sap.aii.ib.bom.landscape.SLDElementNotFoundException: Adapter Engine af.npi.sapnbipoc not found in SLD
     at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:56)
     at com.sap.aii.ib.server.abapcache.sld.AdapterEngineQueries.getAEUrl(AdapterEngineQueries.java:41)
     at com.sap.aii.ib.server.abapcache.logons.IR_LogonData.<init>(IR_LogonData.java:26)
Regards,
Nitin Patil

Error in TRFC for IDoc to File scenario while sending IDoc

Hi,
Configured of 'IDoc to file' scenario is completed. Executed a stand alone program to post IDocs to XXI system using a RFC destination with required previleges.
Outbound IDoc has status successful, but it is blocked in the source system and can be viewed in TCode: SM58 (Transaction RFC). The error status is set as ':00'.
When I tried menu item 'Edit>>Execute LUW', I got the status message as 'Function module does not exist or EXCEPTION raised'.
For your information, User used in RFC destination is communication user with SAP_ALL profile(in XXI system).
Can anybody help me out in resoving the error?
Regards,
Suraj Kumar

Hi,
Thanks for your reply.
It is successfully tested and FYI as the user specified in RFC Destination is a communication user in destination system (XI), it does not have remote logon.
Hope I am clear.
Please let me know, if you need any further information.
Regards,
Suraj

How To Test Idoc To File Scenario in ID From Tools- Test Configuration

Hi All,
Can any body help me in step by step process including screenshots for testing Idoc to file scenario in integration directory from tools->test configuration.
My scenario is passing the PO Idoc data from R/3 into a file using XI.
i have processed the idoc from R/3 and now i went to sxmb_moni in XI system and took the payload xml data.
In ID I have navigated to test configuration from tools then i have provided the following information.
Sender Service : Business system of R/3 b'coz here R/3 is the sender.
Sender Interface : ORDERS.ORDERS6
Receiver Service : Business system of XI b'coz here XI receives the data and         places it into a file
In payload text box i have copied the xml code which i have taken from sxmb_moni and clicked the run button. then i got the following error:
Sender Agreement
Internal Error
                 HTTP connection to ABAP Runtime failed.
                 Error: 403 Forbidden
                 URL: http://bxdci.boewe.custservice.de:8093/sap/xi/simulation?sap-client=100
                 User: PIDIRUSER
Kindly look into it and correct me if iam wrong or is there any other way to test this scenario in ID please suggest.
Thanks & Regards,
Venkat

Hi Venkat,
Specify the test confisuration as follows.
<b>Sender</b>
Service   : Business System of SAP R/3 System
Interface : The outbound message interface name of type the IDOC.
Namespace : will automatically loaded when u select the Interface. Check if it the correct namespace.
<b>Receiver:</b>
Service : Business System name for the Fle system.
Paste the payload that u copied from the sxmb_moni.
Now click on Run and test ur Scenario.
Was the scenario sucessfull in the Message Monitor.
Regards
Santhosh

Seeburger IDOC-to-File scenario: Error using Classifier module

Hello,
I am running the following scenario: ORDERS.ORDERS05 IDOC -> XI -> X12 850 4010 File.
In the file receiver channel, I am using Seeburger's Classifier and BIC modules as follows:
localejbs/SeeClassifier        classifier
localejbs/CallBicXIRaBean      bic
CallSapAdapter                 0
classifier   attID             classifierAtt
classifier   destSourceMsg     MainDocument
classifier   showInAuditLog    true
bic          classifierAttID   classifierAtt
bic          destEncoding      UTF8
bic          destSourceMsg     MainDocument
bic          destTargetMsg     MainDocument
bic          mappingName       AUTO
bic          newLine           true
bic          srcEncoding       UTF8
After conversion in XI, the file fails to write to the folder because of this error:
Message processing failed. Cause: javax.resource.ResourceException: ---
Conversion of synchronous request from module chain ended with errors
---Error: [Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping:
See_XML_AnsiX12 you are trying to load cannot be found in the classpath!
Maybe you forgot to compile or to activate the mapping! DESCRIPTION:
BICMapping Error: The mapping [not specified] you are trying to load cannot
be found in the right path! Maybe you forgot to compile or to activate the
mapping!
When I set the mapping directly to See_X2E_AnsiX12_850_V4010 instead of using the Classifier module, the configuration works fine. But I want to design the receiver channel to be able to receive all types of EDI messages coming from XI.
I am only facing this problem for the IDOC-to-File scenario. Somehow the same configuration works for a File-to-IDOC scenario.
I talked to our Basis team and they said that the map See_XML_AnsiX12 does not exist in Seeburger's delivered content, although I believe that it should be. Has anyone encountered this problem before?
Any suggestions would be appreciated.
Thanks,
Arianne

Hi Yomesh,
Here is the payload.
<?xml version="1.0" encoding="UTF-8"?>
<LIST>
<S_ISA>
    <D_I01>00</D_I01>
    <D_I02/>
    <D_I03>00</D_I03>
    <D_I04/>
    <D_I05>ZZ</D_I05>
    <D_I06>CELORGS01</D_I06>
    <D_I05_2>ZZ</D_I05_2>
    <D_I07>AVX</D_I07>
    <D_I08>032008</D_I08>
    <D_I09>1718</D_I09>
    <D_I10>X</D_I10>
    <D_I11>00401</D_I11>
    <D_I12>000000008</D_I12>
    <D_I13>0</D_I13>
    <D_I14>T</D_I14>
    <D_I15>^</D_I15>
    <S_GS>
      <D_479>PO</D_479>
      <D_142>CLS01</D_142>
      <D_124>058895921</D_124>
      <D_373>20080320</D_373>
      <D_337>1718</D_337>
      <D_28>8</D_28>
      <D_455>X</D_455>
      <D_480>004010</D_480>
      <S_ST>
        <D_143>850</D_143>
        <D_329>800001</D_329>
        <S_BEG>
          <D_353>00</D_353>
          <D_92>SA</D_92>
          <D_324>4500005037</D_324>
          <D_373>20051110</D_373>
        </S_BEG>
        <S_CUR>
          <D_98>BY</D_98>
          <D_100>USD</D_100>
        </S_CUR>
        <S_FOB>
          <D_146>CC</D_146>
          <D_309>OR</D_309>
          <D_352>FREE CARRIER</D_352>
          <D_334>02</D_334>
          <D_335>FOB</D_335>
          <D_309_2>DE</D_309_2>
        </S_FOB>
        <S_ITD>
          <D_336>01</D_336>
          <D_333>3</D_333>
          <D_351>45</D_351>
        </S_ITD>
        <G_SN9>
          <S_N9>
            <D_128>L1</D_128>
            <D_369>GEN</D_369>
            <S_MSG>
              <D_933>TEST</D_933>
            </S_MSG>
            <S_MSG>
              <D_933>MESSAGE</D_933>
            </S_MSG>
          </S_N9>
        </G_SN9>
        <G_SN1>
          <S_N1>
            <D_98>BY</D_98>
            <D_66>92</D_66>
            <D_67>6310</D_67>
            <S_PER>
              <D_366>BD</D_366>
              <D_93>Graham Crawford</D_93>
            </S_PER>
          </S_N1>
        </G_SN1>
        <G_SN1>
          <S_N1>
            <D_98>BT</D_98>
            <D_66>92</D_66>
            <D_67>6310</D_67>
          </S_N1>
        </G_SN1>
        <G_SN1>
          <S_N1>
            <D_98>SE</D_98>
            <D_93>3M COMPANY</D_93>
            <D_66>92</D_66>
            <D_67>0000019591</D_67>
          </S_N1>
        </G_SN1>
        <G_SN1>
          <S_N1>
            <D_98>ST</D_98>
            <D_93>SAMPLE</D_93>
            <D_66>92</D_66>
            <D_67>6310</D_67>
          </S_N1>
        </G_SN1>
        <G_SPO1>
          <S_PO1>
            <D_350>00010</D_350>
            <D_330>10.000</D_330>
            <D_355>EA</D_355>
            <D_212>10</D_212>
            <D_639>PE</D_639>
            <D_235>BP</D_235>
            <D_234>230-1812-01JDS</D_234>
            <D_235_2>EC</D_235_2>
            <D_234_2>A00000000000002</D_234_2>
            <G_SPID>
              <S_PID>
                <D_349>F</D_349>
                <D_352>TIE WRAP,LOCKING,PANDUIT-PLASTIC PART C</D_352>
              </S_PID>
            </G_SPID>
            <S_REF>
              <D_128>CO</D_128>
              <D_127>4500005037-00010</D_127>
            </S_REF>
            <G_SSCH>
              <S_SCH>
                <D_380>10.000</D_380>
                <D_355>EA</D_355>
                <D_374>002</D_374>
                <D_373>20051208</D_373>
              </S_SCH>
            </G_SSCH>
          </S_PO1>
        </G_SPO1>
        <G_SCTT>
          <S_CTT>
            <D_354>1</D_354>
          </S_CTT>
        </G_SCTT>
        <S_SE>
          <D_96/>
          <D_329>800001</D_329>
        </S_SE>
      </S_ST>
      <S_GE>
        <D_97>1</D_97>
        <D_28>8</D_28>
      </S_GE>
    </S_GS>
    <S_IEA>
      <D_I16>1</D_I16>
      <D_I12>000000008</D_I12>
    </S_IEA>
</S_ISA>
</LIST>
Thanks,
Arianne

Error/Doubts in Idoc-XI-File scenario

Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.Jain

Hi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps .

How to suppress the Acknowledgement Error in IDOC to File scenario?

Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
Tirumal

Hi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy

Error in IDoc to file scenario

Hi Experts,
I am working on IDoc to File scenario.IDoc is sccessfully reached XI.In SXMB_MONI it is showing error in request mapping.Error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please suggest me in this issue.
Thanks,
Bhuvan.

Check this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/bb/ad1c3d2b058c4ce10000000a114084/
You might want to refer to the SAP NOTE: 316877
Regards,
Ravi

Error in Operation Mapping for Idoc to File Scenario

Hi Experts,
I am doing Idoc to File Scenario for Timesheet IDoc "HRSM_C" and following step are through,
Sender agreement --> Receiver Determination --> Interface Determination
got stuck in Operation mapping, it sahows error
"Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1"
Also not all the fields of IDoc HRSM_C are transferred to the XI server as I am unable to see all the fields in xml file using transaction idx5, as I suppose the reason behind may be there are no values in those fields.
Please suggest how to resove the issue and transfer all the fields from R3 to XI in Idoc eventhough it doesn't contain any value.

Hi
Refresh CPA cache using user PIDIRUSER.
Look Note 951318 for Mapping Cache Refresh.

Testing of Idoc to file scenario

Hi Gurus,
I have completed the Idoc to file scenario, But how should I test the whole scenario??!!
Because of my functional guy is absent for this week and I do want to test my scenario, whether its working properly or not??!!
Note: As I knew, we19 tcode, it asks some Idoc number and other info to do the same.. could you please help me out?!!
Thanks.,
Stallin

Hi
Just for testing purpose..you can use WE19..
First goto transaction WE02 and put Basic type : MATMAS03 as filter criteria, change your creation date to select little old idocs and run...on next screen your will see number of idocs "MATMAS03" with green status(if there is any in that period..otheriwse change period again).
Then goto WE19 and put existing idoc number in the field existing idoc and and presss F8...On next screen press "Standard outbound processing".
Can also use we19 and change control record ( Double click in EDIDC segment) to your sender / recever partner profile.. and run
Thanks

Test IDOC to File scenario

Hey guys
i m doing a IDOC to File scenario and am stuck at testing it.i went in we19 but dont know how should i test my scenario there.
any idea how should i test my scenario
thanx
ahmad

Hi Ahmad,
IDOC to File
R3 system.
1. Create SM 59 RFC destination to XI,.
2. We21 - Create port to XI.
3. We 20 -- Maintain Partner Profile for the outbound Idoc.
XI SLD
1. Create technical system for R3 system
2. Create Business System for the Client of the R3 system.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
These are the required steps for IDoc to File scenario...
In R3 (i.e., your IDES system)...
RFC dest to XI (sm59) - any name
Logical system (bd54) - any name
Port to XI (we21) - any name
Partner profile for the logical system (we20) - use Logical system name created in bd54
In XI...
RFC dest to R3 (sm59) -
Port to R3 (idx1) -
create metadata for the idoc (idx2)
In sld...
create business system for R3 with Logical system name as r3 sys.
In we19
and give in control record as
Sender : Port ; Partner
Receiver : Port = <Port created in WE21> ; Partner = <Partner created in we20>
Regards..
Ramesh.

IDOC to file scenario testing error --

Similar Messages

Maybe you are looking for