Idoc to file scenerio query

Hi,
I have done a XI scenerio ( SAP idoc -> Xi-> file) and it is working perfectly in XID. I have observed a strange thing ...
In configuration scenerio i have defined sender business system as BS_ECC_400_001. But this is not there in SLD. And the whole scenerio is working....Can anyone please tell me why is this so ???
FYI, the business system was there in the object tab, i had not created it.
Regards
Niladri

Hello,
Check whether SLD is pointing to development environment, it might be pointing to other server. Same thing happend in my project. SLD was pointing to production environment.
Click on SLD link from your home page.
Regards,
Sreenvias.

Similar Messages

Complete file not displayed in File server(Idoc - XI File scenerio)

Hi,
Am working on Idoc-XI-File scenerio.
The target file is getting generated properly and complete xml n Adapter Monitoring in RWB.
But in the file server(in the directory)only part of the xml is displayed.The size of the file is 82KB.
Is there any configuration need to see the complete file in File Server.

Hi Amit,
This could be due to Network. How far is the file server from XI server?
I suggest putting the file in to local machine or in the same network and check whether it is OK.
- Pinkle

XI and R/3 System connection settings for IDOC to File scenerio.

Hi SAP champs,
I am working on a IDOC to File XI scenerio. But I am confused while configuring connection settings at XI system and R/3 system. I am finding problem in transaction IDX2 to maintain the IDOC metadata. Please let me know the complete step by step system cofigurations in XI and R/3 systems for the scenerio. Thanks in advance..
Regards
Sanjeev.

Hi Sanjeev,
We upload Medata in IDX2 to just reduce runtime effort and hence to improve the performance. However it is not a mandetory step to be performed for R/3 TO XI scenario.
You are confused just because here you dont find any F4 help to select the metadata and the PORT.
Thanks
Sunil Singh

Idoc to file scenerio

Hi,
My scenerio is to send message type HRMD_A basic type HRMA_A07 to a flat file.
I need to map the following fields only
E1P0001 or E1P0002 or E1P0105   PERNR
E1P0001                                         BUKRS
E1P0001                                         KOSTL
E1P0001                                         PERSK
E1P0001                                         ORGEH
E1P0002                                         VORNA
E1P0002                                         NACHN
E1P0105                                         USRID_LONG
I do this thru graphical mapping. In HRMD_A the highest segment is E1PLOGI under which we have the Infotype segments. In one IDOC i can have many E1PLOGI segments( about 100)
when my scenerio is executed teh data from the first E1PLOGI is ONLY send to file. i want to send all the data.
Can anyone help me?
Regards

hi Pooja,
   The target message is :
    Mt_traget
         Record                 0....Unbounded
              PERNR                  1..1
              BUKRS                   1..1
              KOSTL                    1..1
              PERSK                   1..1
              ORGEH                  1..1
              VORNA                  1..1
             NACHN                   1..1
             USRID_LONG          1..1
I map the fields from the different IDOC segments to the target fields.
so my target Xml is like :
</Record>
<pernr>
< usrid_long>
<Record>
the problem is only one data is mapped to target ..

Idoc to file scenario general query

Hi All,
I know about the basic settings needed for the Idoc to file scenario.
My query is related the idoc /ALE settings.
I have a scenatio wrking in my system where we have configured the port for B type partner and also the port as XML-HTTP
I can not see any DM(BD64) created for it basically.I want to know that in what scenarios the BD64 configuration is required.
Or it is the case that if we define the BD64 then we do not need to configure we20 and we21, it will be auto configured?
Please let me know the use cases for these different configurations if any.
Thanks in advance.
Regards,
Rahul Kulkarni

Hi Rahul,
BD64 uses mostly IDoc to IDoc scenarios because the IDoc consults the distribution model and determines whether any filter objects are specified for a receiver.
WE20 and WE21 (Partner Profile,Port Definition) we have to define in any scenarios where ECC included.
Thanks,
Seshu.

Query realted to IDOC packaging in case of IDOC-SAPPI- FILE scenario

Hi,
I have requirement related to IDOC packaging, i.e. SAP ECC -SAP PI - FTP server.
I have done the following settings:
1) In WE20, I put the partner profile settings to collect mode.
2) I am using RSEOUT00 to trigger the collected IDOCs for example 2 idocs together.
3) In SAP PI, I have done the following settings
a) I added the the parameter in sxmb-adm, RUNTIME , PACKAGING & Value 1
b) I have used IDXPW t-code to activate the message packages for IDOC
c) I run the job through sxmb_adm t-code, configure event driven message filtering
d) I exported the xsd of ORDERS05 and changed occurence of source structure to 0 to Unbounded and imported it in Integration Repository.
e) I am not using mapping & interface mapping as I just want to post the IDOC structure as it to the receiving FTP server. Therefore when I changed the occurence of ORDERS05 xsd to 0 to unbounded my idea was that in the outbound message interface it will be reflected which will be ultimately reflected in Integration directory.
Problem Details:
When I test for the 2 PO idoc from SAP ECC, it generates 2 messages in SAP PI and also 2 files in FTP server but actually it should generate one output file containing both the IDOC details.
Note: I am just trying to merge 2 idocs of PO as IDOC package into one output message.
Can anybody what configuration settings I am missing for the packaging.
Thanks & Regards
Prabhat

Hi Prabhat,
If you are using PI 7.0 EHp1 or PI 7.1 Ehp1, you can configure packaging parameter and create single file for multiple idocs without using BPM.
In other case, you have to use BPM.
But recommended approach would be to create XML file port on SAP ECC and create IDOC XML file.
You must have set collect IDOCs option in partner profile.
Now you can execute RSEOUT00 report program and specify IDOC type and number IDOCs to be collected.
This configuration will generate IDOC XML file for number IDOCs you specified in RSEOUT00 report program.
In PI you can use File adapter to pick the file.
Here is the nice blog explaining entire process:
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
Best Regards,
Divyesh

Why we dont need sender agreement and comm channel in IDOC to file scenario

Hi,
there are 2 queries:
first query :
Scenario is "Idoc to file transfer"
why we dont need sender agreement and communication channel for IDOC to file ,while we do need
both of these for "File to RFC "
Answer : which i got is because IDOC sits at ABAP stack but same is valid for RFC also.
Then why For "IDOC to file" we dont need that.
Second query:
Also when i did scenario for File1-RFC-File2 scenario using BPM i have created a interface
between XI-RFC synchronous to send data which we got from file1 in XI to RFC importing parameter
and getting data from RFC back to File2.
Here in IDOC to file scenario why we dont need any interfface for IDOC-XI Asynchronous.
Regards,
Mayank
Edited by: mayank verdia on Jan 13, 2009 11:49 AM
Edited by: mayank verdia on Jan 13, 2009 11:50 AM

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

IDOC to File Scenario - Configuration steps need to be done in R3 and XI

Hi Experts,
I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too.
Thanks in advance.
Regards,
Sree

Hi Sree,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this answers your query.
Regards,
Abhy Thomas

Setup for IDoc-XI-File scenario

Hi All,
Please provide info where can I find, step by step documentation for the basic setup on R/3 and XI areas, before start developing IDoc-XI-File or File-XI-IDoc scenarios.
Thank you,
Sree

Hi,
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
File -> IDOC ->
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
(It concentrates on XSLT mapping but also gives an idea about the configuration part. Do go thru that, it might help you.)
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
I hope I have answered your query.
Regards,
Abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

No message in found in XI in IDOC to FILE scenario

Hi everybody,
I am working on a scenario idoc to file. The idoc is sent sucessfully from R/3 , but I am not getting any message in message monitoring in XI.Can anybody help me on this?

Hi Bhagyashree,
Just see if the file is generated at the specified destination....
Meanwhile please go through the info below and cross check with what you have done...
i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
I hope this answers your query.
Regards,
Abhy

Idoc to file scenaro ( sending IDOC as it is to NON-SAP)

Hi Experts,
I am doing idoc to file scenario.
I am having SAP R/3 system with 3 clients(100, 200 & 300), IDOC is comming from SAP R/3( any one of the client)
In this is scenario, I am sending IDOC-XML as it is to the NON-SAP system.
I heard that, i can do in 3 ways. those are
1. Without any repository objects: you can go ahead with No interface mechanism on the target side.
2. Without message type: create a message interface whose message type would be idoc itself
3. With message type: export the IDOC as xsd file and re import the xsd file as an external definition.
If i go without IR objects,Please tell me whether i need to create Interface objects(i.e. DT,MT & MI) & Mapping objects (MM & IM) or not for the reciever.
MY ASSUPTION:
step1: I will import the IDOC into IR.
step2: Directly i will go to the ID without desiging any object in IR ( is it ok).
Is my assuption or correct or not?, please tell me.
So please tell me the entire scenario how to achieve this.
Please help in this issue.

Hi Laxmi
1. Without any repository objects: you can go ahead with No interface mechanism on the target side.
-- Not Possible
2. Without message type: create a message interface whose message type would be idoc itself
-- No need for the Message Interface for IDOC. You will directly import the IDOC and do the Mapping
3. With message type: export the IDOC as xsd file and re import the xsd file as an external definition.
-- This is Possible. you are export the IDOC as XSD File and reimport the same. so there is no difference. If you are going to change the IDOC Structure then this is possible.
Here I am sending some links which are useful for IDOC to File Scenario. Please go thru the links given below..
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
IDoc-XI-File scenario
File -> IDOC ref:
File to IDOC
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
I hope this answers your query.
Award the POINTS if it is useful **
Cheers
Vasu

Conversion of XML Idoc to File Idoc

Hi,
My query is:
I have an XI (PI 7.0) in between an SAP system and a file system. An idoc comes into XI. It needs to be conerted to a file idoc, ie, each segment needs to be separated by a new line. How can I achieve this?
1. Do I have to create a java/ ABAP class?
2. Is an adapter available which does this for me?

Hi Tamoghno,
1. No
2. Yes, use the File/FTP and IDoc Adapters.
Do a search on SDN on "How To ..." for IDoc and File scenario and you will find a plethora of them. You can also start at the WIKI page for SAP XI.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/main&
Also try this:
https://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
Hopes this helps!
Regards,
John Ta

Hi experts- RFC look up in IDoc to File Senario

Hi,
I have req with Idoc to file (delivery Idoc).
But i need to get user name of sender(r/3) into file which is not available in idoc type.
I think we can do through <b>RFC lookup</b> functonality.
Can u tell me <b>exact procedure and code</b> for this?

Hi,
Check some links on Look ups.
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
Look ups.
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
/people/francesco.bersani/blog/2007/03/05/data-lookup-optimized
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Use this crazy piece for any RFC Mapping Lookups!
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
SAP XI Lookup API
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Lookups in XI made simpler
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
Lookup - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
DB lookup - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
SOAP Lookup - /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0
Lookup's in XI made simpler - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
How to check JDBC SQL Query Syntax and verify the query results inside a User Defined Function of the Lookup API -
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
/people/prasad.illapani/blog/2006/10/25/how-to-check-jdbc-sql-query-syntax-and-verify-the-query-results-inside-a-user-defined-function-of-the-lookup-api
Lookups - /people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
Lookups - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
Lookups with XSLT - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
/people/sravya.talanki2/blog
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
How we have to create the lookups?
Check this weblogs with some screenshots on how to achieve this:
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
/people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
Regards,
Phani
Rewar points if Helpful

Idoc to file scenario which involves accessing a persistant counter value

Hi,
Presently Iam dealing with an idoc to file scenario in which I need to map the idoc info and also a persistant counter value to a flat file. So in how many ways can we maintain a persistant counter value(either by variable/file/database)? Please can any one help me in overcoming this scenario by providing any implemented example.

Hi,
Please see the following links , you can use database is best.
/people/prasad.illapani/blog/2006/10/25/how-to-check-jdbc-sql-query-syntax-and-verify-the-query-results-inside-a-user-defined-function-of-the-lookup-api
/people/michal.krawczyk2/blog/2005/09/15/xi-rfc-mapping-lookups-from-bc-to-xi
/people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/alexander.schuchman/blog/2005/09/29/ipc-customization--add-additional-subtotals-and-include-rebate-conditions
Regards
Chilla..

Idoc to File. Partner type as 'KU' and 'LI'.. Acheivable w/o using Party's?

Hi all,
Idoc to File scenario.
I have the receiver partner type as 'KU' and sender partner type as 'LI'.
I want to create the scenario without using party for these partner Types.
Is it possible for me to create the B2B scenario without using party's?
Is it mandatory that we need to use partys and Identifiers for these kind of scenarios?
Kindly let me know if anyone has idea on this.
Thanks
-Seema

Hi Seema,
I appreciate that you chose to go with the parties
That should be called a good design decision.......
Now answering your query regarding the party identifiers
Idoc to File :
<SNDPOR>SAPDL1</SNDPOR>
<SNDPRT>LI</SNDPRT>
<SNDPRN>90000</SNDPRN>
<RCVPOR>SAPXI</RCVPOR>
<RCVPRT>KU</RCVPRT>
<RCVPFC>SP</RCVPFC>
<RCVPRN>36</RCVPRN>
For Sender Party (say party INTERNAL)
Agency : LD1_001
Scheme: ALE#LI
Name: 90000 (vendor number set in WE20 in the R/3)
For Receiver Party (say party EXTERNAL)
Agency: LDI_001 (SID_<client> BS as defined in SLD)
Scheme: ALE#KU#AG (AG for partner function SP)
Name: 36 (customer number set in WE20 in the R/3
This will resolve the IDoc header data into the following XI SOAP header information:
Sender Party - INTERNAL
Sender Service - LD1_001 (say this is the business system defined for logical system SAPLD1
Receiver Party - EXTERNAL.
Though, you can determine the receiver party alongwith the Receiver Service later at RCV DETERMINATION step, as I have said earlier.
Yes, for outbound you have to maintain the identifiers for Sender Party type LI, but you can still skip the Receiver KU type and update the SOAP header at RCV DET step.
File to Idoc:
<SNDPOR>SAPXI</SNDPOR>
<SNDPRT>KU</SNDPRT>
<SNDPRN>36</SNDPRN>
<SNDPFC>SP</SNDPFC>
<RCVPOR>SAPDL1</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>MAINSAP</RCVPRN>
For Sender Party (say party INTERNAL)
Agency: LD1_001 (SID_<client>)
Scheme: ALE#KU#AG
Name: 36
For Receiver Party (say party EXTERNAL)
Because the RCVPRT value is LS , no need to set the Receiver Party for that.
But if you want to have some Receiver Party value for the same you can use Header Mapping in receiver agreement.
Mandatory Setup in Receiver IDoc Adapter:
Set the indicator - Apply Control Record Values from Payload
Remember to set the Identifiers in the Identifiers Tab in Idoc channel.
Sender:
Agency : LD1_001 Scehma : ALE#KU#AG
Receiver:
Agency: LD1_001 Schema : ALE#LS
I am not sure why this ALE#LS entry is required, but according to my experience if we don't have that entry, the Idoc Adapter throws error while converting the Receiver Party (considering you use party in the ID configuration for both Sender and Receiver).
Yes you are right, you can hard code the SNDPRN, RCVPRN values in the mapping and can take the values from payload...........for that set the following Indicators in Idoc channel:
Take Sender from Payload
Take Receiver from Payload
Let me know if you have any concerns or any additional observation you make while configuring the scenarios. Thanks.
Regards,
Suddha

Idoc to file scenerio query

Similar Messages

Maybe you are looking for