IDOC to Flat file and Flat file to IDOC

Hello Experts,
I have the following requirement in my current project:
Third Party Sender sends the data in the in the below XML format via HTTP:
<?xml version="1.0"?>
<fxEnvelope>
<header>
    <message>
      <exchangeID></exchangeID>
      <messageID></messageID>
      <subject></subject>
      <payloadType>IDOC</payloadType>
    </message>
    <from>
      <orgID></orgID>
      <locationID></locationID>
      <messageID></messageID>
    </from>
    <to>
      <orgID></orgID>
      <locationID></locationID>
    </to>
</header>
<body>
    <Opaque>
      <DataType></DataType>
      <DataStream></DataStream>
    </Opaque>
</body>
</fxEnvelope>
In the above XML, the Tag <DataStream> is a string which contains the IDOC flat file.
Now, the scenario is HTTP to IDOC, where the sender sends the above XML payload and PI needs to convert <DataStream> to IDOC XML and pass it on to the receiver R/3.
But the challange i am facing is converting this <DataStream> tag which contains the IDOC flat file to IDOC XML using a Mapping program.Since both adapters are running on ABAP stack i can not go for Adapter Modules available(We are using PI 7.10).
Looking for some guidance on the same.
Thanks in advance.
Cheers,
Manasa.

There are 2 options for you
In either case, you might need a java mapping to convert the DataStream into String. Use a file adpater to write this string to IDOC-File.
1) Option1: Write the content of DataStream into IDOC-Flatfile.(java mapping) Pick it from PI to convert IDOC-flat file inot IDOC-XML (using std features of PI) & send it to ECC.
2) Option2: Write the Content of DataStream to IDOC-Flatfile (accessible to ECC system). Configure WE21 to pick the file from a file port.
If the datastream was IDOC-XML, then it would have been simpler, it will be a direct communcation from PI to ECC (using java mapping & IDOC adapter).
Regards,
Siva Maranani

Similar Messages

Hi all, need data file and co file after single transport in 6.4 or 6.7

hi all
following is the requirement
To process/compile the attached programs (given below) in 6.4/7 Kernel (SAP 6.4 version or 6.7 version )and send a single transport (Data File and Co File).
these data file and co file are flat files.
CAN ANYONE HELP ME GETTING THESE FLAT FILES. I need these flat files urgently.
WHAT U HAVE TO DO IS:
IF U HAVE 6.4 OR 6.7 VERSION, JUST TRANSPORT FOLLOWING 10 PROGRAMS IN SINGLE TRANSPORT IN TESTING SYSTEM OR DEVELOPEMENT SYSTEM AND AFTER GETTING DATA FILE AND CO FILE U CAN REVERT THE TRANSPORT.
Programs files are as follows: (total number of prog is 10)
1.
FUNCTION Z_3N_CKS_EXIST_USER .
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSMDTID) TYPE USR02-MANDT DEFAULT SY-MANDT
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" EXCEPTIONS
*" USER_DONT_EXIST
*" USER_EXISTS
FUNCTION TO CHECK IF USER EXISTS
CLEAR RCODE.
CALL FUNCTION 'USER_EXISTS'
EXPORTING
BNAME = CKSUSRID
CLIENT = CKSMDTID
EXCEPTIONS
USER_DONT_EXIST = 1
USER_EXISTS = 0.
RCODE = SY-SUBRC.
ENDFUNCTION.
2.
FUNCTION Z_3N_CKS_LOCKSTATE.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO OBTAIN THE CURRENT LOCK STATUS FOR A USER
*{ PASSGOAPR06
*\DATA:LOCKSTATE(50) type c,
*\C_LOCKED_BY_ADMIN like usr02-uflag.
*\tables:usr02.
DATA:LOCKSTATE(50) type c.
*} PASSGOAPR06
CLEAR: RCODE, LOCKSTATE.
SELECT SINGLE * FROM USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01. "No such User
EXIT.
ENDIF.
*{ PASSGOAPR06
IF USR02-UFLAG Z C_LOCKED_BY_ADMIN AND
USR02-UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF USR02-UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF USR02-UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
uflag = usr02-uflag.
IF UFLAG Z C_LOCKED_BY_ADMIN AND
UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
3.
FUNCTION Z_3N_CKS_PWDCHG_INITIAL.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO INITIALISE USERs PASSWORD, USER WILL BE FORCED
TO CHANGE PASSWORD ON NEXT LOGIN
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01.
else.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
PASSWORD = CKSUSRPWD
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
loop at return.
if return-type eq 'E' or return-type eq 'A'.
rcode = 13.
endif.
endloop.
endif.
ENDFUNCTION.
4.
FUNCTION Z_3N_CKS_VERIFY_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE RSYST-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE OPTIONAL
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO VALIDATE A USER
*{ PASSGOAPR06
TABLES:USR02.
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC = 4.
RCODE = 01. "no such user
EXIT.
ELSEIF CKSUSRPWD = SPACE.
RCODE = 03. "invalid old password
EXIT.
ELSE.
CALL FUNCTION 'SUSR_LOGIN_CHECK_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = CKSUSRPWD
EXCEPTIONS
WAIT = 1
USER_LOCKED = 2
USER_NOT_ACTIVE = 3
PASSWORD_EXPIRED = 4
WRONG_PASSWORD = 5
NO_CHECK_FOR_THIS_USER = 6
INTERNAL_ERROR = 7
OTHERS = 8
CASE SY-SUBRC.
WHEN '2'. RCODE = 02. "user disabled/blocked
WHEN '3'. RCODE = 02. "user disabled/blocked
WHEN '4'. RCODE = 03. "invalid old password
WHEN '5'. RCODE = 03. "invalid old password
WHEN '8'. RCODE = 12. "internal error
ENDCASE.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
5.
*& Include ZMS01JTOP *
PROGRAM MS01JTOP MESSAGE-ID 01 LINE-SIZE 132. "Berechtigungsdatenpflege
13.08.93
INCLUDE MS01CTP2.
INCLUDE MS01CTCO.
TABLES: XU200, XU213, XU310, XU350, XU390, XU400.
TABLES: TSTC, TSP03, TPARA, TPARAT.
TABLES: *USR01, *USR03, USR15.
TABLES: SOUD, SOUD3.
*ABLES: ZCSA, ADRS.
*{ PASSGOAPR06
TABLES: usr02.
DATA: uflag type x.
DATA: begin of return occurs 0.
INCLUDE structure bapiret2.
DATA: end of return.
DATA calling_cksusrid like usr02-bname.
DATA: init_pass like BAPIPWD.
INCLUDE USER_CONSTANTS.
*} PASSGOAPR06
CONTROLS TC213 TYPE TABLEVIEW USING SCREEN 213.
CONTROLS TC520 TYPE TABLEVIEW USING SCREEN 350.
DATA: COPYOK TYPE I,
RENAMEOK TYPE I,
DATFM1,
DATFM2,
DATFM3,
DATFM4,
DCPFM1,
DCPFM2,
USERNAME LIKE USR01-BNAME,
LOCK,
UNLO,
STATFLAG TYPE I VALUE 0,
NAVIFLAG TYPE I VALUE 0,
PARTOPIX TYPE I,
PARFILL TYPE I,
PARAMETER LIKE USR05-PARVA,
PARID LIKE USR05-PARID,
PARLOOP LIKE SY-STEPL,
SHOW_ONLY VALUE ' ',
INTPRO_LOADED TYPE I VALUE 0,
EXT_SECURITY VALUE ' '.
DATA: H_201_USGRP LIKE USGRP-USERGROUP,
H_201_VALID TYPE C,
CC201 LIKE SY-CUCOL VALUE 2,
CR201 LIKE SY-CUROW VALUE 6,
SAVE_LINE201 LIKE SY-LILLI VALUE 1,
SAVE_LSIND201 LIKE SY-LSIND VALUE 1.
DATA: OFFICENAME LIKE SOUD-USRNAM.
DATA: BEGIN OF NAME_IN.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_IN.
DATA: BEGIN OF NAME_OUT.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_OUT.
DATA: BEGIN OF EMPTYPROF OCCURS 2.
INCLUDE STRUCTURE USREF.
DATA: END OF EMPTYPROF.
DATA: BEGIN OF PROFILES OCCURS 10.
INCLUDE STRUCTURE USREF.
DATA: END OF PROFILES.
DATA: MAXPAR TYPE I VALUE 300.
DATA: BEGIN OF TABPAR OCCURS 300,
PARID LIKE USR05-PARID,
PARVA LIKE USR05-PARVA,
END OF TABPAR.
DATA: BEGIN OF DELTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF DELTAB.
DATA: BEGIN OF ADDTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF ADDTAB.
DATA: BEGIN OF ADDRESS_DATA.
INCLUDE STRUCTURE SADRP_USR.
DATA: END OF ADDRESS_DATA.
DATA:
CLEAR TYPE X VALUE '00'.
*ATA: BEGIN OF ADRSDATEN.
INCLUDE STRUCTURE ADRS.
*ATA: END OF ADRSDATEN.
06.10.95 Tosun
DATA 930_FLAG.
"$$
6.
FUNCTION Z_3N_CKS_LOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM LOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_LOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
7.
FUNCTION Z_3N_CKS_PWDCHG_DIRECT.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO CHANGE USERs PASSWORD
Password is initialised to a fixed value,
to avoid having to provide the valid old password
If the password change fails, the change is
rolled back - this is required because
BAPI_USER_CHANGE does an internal commit.
CLEAR: USR02, RCODE.
DATA: L_TIME LIKE SY-UZEIT,
ZLIN TYPE I.
*{ PASSGOAPR06
calling_cksusrid = cksusrid. "Save calling userid
init_pass = 'INITPASS'.
*} PASSGOAPR06
do 1 times.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 1.
else.
* Change login to initpass.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
*{ PASSGOAPR06
*\ PASSWORD = 'INITPASS'
PASSWORD = init_pass
*} PASSGOAPR06
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
* Evaluate return table, if not success, rcode = 13
describe table return lines zlin.
IF zlin > 0.
IF return-type ne 'S'.
rcode = 13.
exit.
ENDIF.
ENDIF.
* Wait 1 second, otherwise table ush02 gets the same key as before.
* Not very good, but its the only way, because the wait up to
* statement includes a db-commit.
L_TIME = sy-uzeit.
WHILE L_TIME = sy-uzeit.
GET TIME.
ENDWHILE.
* Change 'INITPASS' to input login
CALL FUNCTION 'SUSR_USER_CHANGE_PASSWORD_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = 'INITPASS'
NEW_PASSWORD = CKSUSRPWD
NEW_BCODE = '0000000000000000'
NEW_CODVN = ' '
EXCEPTIONS
CHANGE_NOT_ALLOWED = 1
PASSWORD_NOT_ALLOWED = 2
INTERNAL_ERROR = 3
CANCELED_BY_USER = 4
OTHERS = 5.
case sy-subrc.
when '0'. rcode = 0.
when '1'. rcode = 2.
when '2'. rcode = 4.
when '3'. rcode = 12.
when '4'. rcode = 2.
when '5'. rcode = 12.
ENDCASE.
ENDIF.
exit. "end of do 1 times "
enddo.
* rollback if it didn't work
if not rcode is initial.
rollback work.
endif.
ENDFUNCTION.
8.
FUNCTION Z_3N_CKS_UNLOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM UNLOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_UNLOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
9.
*& Include ZMS01JO10 *
MS01JO10 Module before Output
14.05.93
MODULE D150_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D150_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10 AND SY-LILLI = 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10.
XU150-VON = SY-LISEL.
ELSE.
COUNTX = PUSR - 1.
ASSIGN SY-LISEL+COUNTX(12) TO <TEXT>. " unicode
WRITE <TEXT> TO XU150-VON.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
IF FERTIG = 2.
FCODE = 'BACK'.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE.
MODULE D150_SETSTATUS *
PF-Status setzen *
MODULE D150_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 150.
XU150-SELPROF = XU150-SELFEST = XU150-SELADRE = XU150-SELPARA = 'X'.
XU150-SELMENU = 'X'.
ENDMODULE.
MODULE D155_SETSTATUS *
PF-Status setzen *
MODULE D155_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 155.
ENDMODULE.
MODULE D200_SELECT *
Einen Eintrag aus der Liste ins Dynpro uebernehmen *
MODULE D200_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU200-XUSER = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
IF FCODE2 = 'USER' OR FCODE2 = 'FEST' OR FCODE2 = 'ADRE' OR
FCODE2 = 'PARA' OR FCODE2 = 'ADMI' OR FCODE2 = 'RESE' OR
FCODE2 = 'N '.
SUPPRESS DIALOG.
ENDIF.
PERFORM SET_STATUS USING 200.
ENDMODULE.
MODULE D213_VALOUT *
Festwerte auf das Dynpro schreiben. *
MODULE D213_VALOUT OUTPUT.
DEL = 0.
XU213-DIA = '.'.
XU213-ODC = '.'.
XU213-BDC = '.'.
XU213-CPIC = '.'.
XU213-BATCH = '.'.
CASE USR02-USTYP.
WHEN TYPDIA.
XU213-DIA = 'X'.
WHEN TYPBATCH.
XU213-BATCH = 'X'.
WHEN TYPCPIC.
XU213-CPIC = 'X'.
WHEN TYPBDC.
XU213-BDC = 'X'.
WHEN TYPODC.
XU213-ODC = 'X'.
ENDCASE.
IF USR02-LTIME <> SPACE AND USR02-LTIME <> '000000'.
LOOP AT SCREEN.
CASE SCREEN-GROUP1.
WHEN 'MOD'.
SCREEN-INVISIBLE = '1'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDCASE.
ENDLOOP.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
CODEFLAG = 1.
ELSE.
CLEAR XU213-BCODE.
CLEAR XU213-BCODE2.
IF USR02-BCODE <> '0000000000000000' AND BCODE_C = SPACE.
CODEFLAG = 0.
ENDIF.
IF CODEFLAG = -2.
SET CURSOR FIELD 'XU213-BCODE'.
MESSAGE S290.
ELSE.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
ENDIF.
ENDIF.
ENDMODULE.
MODULE D213_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D213_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 4.
MESSAGE S209.
ELSE.
ASSIGN SY-LISEL(PROFLNG) TO <TEXT>.
MOVE <TEXT> TO XU213-PROFILE.
PERFORM AUTH_CHECK USING OBJ_PROF
XU213-PROFILE SPACE ACT_INCLUDE RC.
IF RC <> 0.
MESSAGE S478 WITH XU213-PROFILE.
ELSE.
FOUND = 0.
LOOP AT TABUSR.
IF TABUSR-PROFILE = XU213-PROFILE.
FOUND = 1.
MESSAGE S268 WITH XU213-PROFILE.
EXIT.
ENDIF.
ENDLOOP.
IF FOUND = 0.
PERFORM EXIST_USR10
USING XU213-PROFILE AKTIVATED SPACE RC.
CLEAR TABUSR.
TABUSR-PROFILE = XU213-PROFILE.
IF USR10-TYP = COLECTPROF.
TABUSR-SAMPROF = 'X'.
ENDIF.
Profiletext lesen
CLEAR USR11.
SELECT SINGLE * FROM USR11
WHERE LANGU = SY-LANGU
AND PROFN = TABUSR-PROFILE
AND AKTPS = AKTIVATED.
TABUSR-PTEXT = USR11-PTEXT.
APPEND TABUSR.
XU213-FILL = XU213-FILL + 1.
IF XU213-FILL >= MAXUSR.
MESSAGE S269.
ENDIF.
UCHANGE = 1.
PERFORM NOTSAVED.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 213.
PERFORM MESSAGE.
IF EXT_SECURITY <> '1'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'EXT'.
SCREEN-INPUT = '0'.
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE.
MODULE D213_PROFOUT *
Profiles auf den Bildschirm ausgeben. *
MODULE D213_PROFOUT OUTPUT.
include <symbol>.
COUNTX = XU213-TOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= XU213-FILL. "Am Ende der Tabelle ?
READ TABLE TABUSR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABUSR TO XU213. "Daten auf den Bildschirm
xu213-samprof = sym_documents.
ENDIF.
ENDIF.
USRLOOP = SY-LOOPC.
ENDMODULE.
MODULE D254_SUPPRESS *
Dialog fuer Dynpro 254 unterdruecken *
MODULE D254_SUPPRESS OUTPUT.
SUPPRESS DIALOG.
ENDMODULE.
MODULE D310_SETSTATUS *
PF-Status setzen *
MODULE D310_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 310.
IF STATFLAG = 1.
LOOP AT SCREEN.
IF SCREEN-NAME = 'USR01-CATTKENNZ '.
AUTHORITY-CHECK OBJECT 'S_DEVELOP'
ID 'DEVCLASS' DUMMY
ID 'OBJTYPE' FIELD 'SCAT'
ID 'OBJNAME' DUMMY
ID 'P_GROUP' DUMMY
ID 'ACTVT' FIELD '70'.
IF SY-SUBRC <> 0.
SCREEN-INPUT = 0.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
PERFORM SET_STATUS USING 330.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D310_FORMAT_OUT. *
Datumsformat und Dezimalpunktformat entsprechend Daten aus usr01 *
ankreuzen. *
MODULE D310_FORMAT_OUT OUTPUT.
XU310-DATFM1 = ' '.
XU310-DATFM2 = ' '.
XU310-DATFM3 = ' '.
XU310-DATFM4 = ' '.
XU310-DATFM5 = ' '.
XU310-DCPFM1 = ' '.
XU310-DCPFM2 = ' '.
XU310-SPDB1 = ' '.
XU310-SPDA1 = ' '.
IF USR01-DATFM < 1 OR USR01-DATFM > 5.
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'zcsa/moddatfm'
ID 'VALUE' FIELD USR01-DATFM.
ENDIF.
CASE USR01-DATFM.
WHEN 1.
XU310-DATFM1 = 'X'.
WHEN 2.
XU310-DATFM2 = 'X'.
WHEN 3.
XU310-DATFM3 = 'X'.
WHEN 4.
XU310-DATFM4 = 'X'.
WHEN 5.
XU310-DATFM5 = 'X'.
WHEN OTHERS.
XU310-DATFM1 = 'X'.
ENDCASE.
IF USR01-DCPFM = ' '.
XU310-DCPFM1 = 'X'.
ELSE.
XU310-DCPFM2 = 'X'.
ENDIF.
IF USR01-SPDB = 'G'.
XU310-SPDB1 = 'X'.
ENDIF.
IF USR01-SPDA = 'D'.
XU310-SPDA1 = 'X'.
ENDIF.
CLEAR TSP03.
SELECT SINGLE * FROM TSP03
WHERE PADEST = USR01-SPLD.
ENDMODULE.
MODULE D320_SETSTATUS *
PF-Status setzen *
MODULE D320_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 320.
ELSE.
PERFORM SET_STATUS USING 340.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D330_SETSTATUS *
PF-Status setzen *
MODULE D330_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 330.
ENDMODULE.
MODULE D340_SETSTATUS *
PF-Status setzen *
MODULE D340_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 340.
ENDMODULE.
MODULE D350_SETSTATUS *
PF-Status setzen *
MODULE D350_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
TABPAR-PARID = SY-LISEL.
APPEND TABPAR.
PARFILL = PARFILL + 1.
ENDIF.
SELE = 0.
ENDIF.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 350.
ELSE.
PERFORM SET_STATUS USING 360.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D350_PAROUT *
Parameter auf den Bildschirm ausgeben. *
MODULE D350_PAROUT OUTPUT.
COUNTX = PARTOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= PARFILL. "Am Ende der Tabelle ?
READ TABLE TABPAR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABPAR TO XU350. "Daten auf den Bildschirm
SELECT SINGLE * FROM TPARAT
WHERE SPRACHE = SY-LANGU
AND PARAMID = TABPAR-PARID.
ENDIF.
ENDIF.
PARLOOP = SY-LOOPC.
ENDMODULE.
MODULE D351_SETSTATUS *
PF-Status setzen *
*ODULE D351_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU350-PARID = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 352.
SUPPRESS DIALOG.
*NDMODULE.
MODULE D360_SETSTATUS *
PF-Status setzen *
MODULE D360_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 360.
ENDMODULE.
MODULE D390_STATUS *
PF-Status setzen. *
MODULE D390_STATUS OUTPUT.
data uflag_x type x. " unicode
SELECT SINGLE * FROM USR02
WHERE BNAME = XU200-XUSER.
uflag_x = USR02-UFLAG. " unicode
IF SY-SUBRC <> 0.
XU390-STATTEXT = ' Nicht vorhanden.'(222).
ELSE.
IF uflag_x Z YULOCK AND uflag_x Z YUSLOC. " unicode
PERFORM SET_STATUS USING 390.
XU390-STATTEXT = ' Nicht gesperrt. '(223).
ELSE.
IF uflag_x O YULOCK. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Falschanmeldungen gesperrt !!!'(224).
ENDIF.
IF uflag_x O YUSLOC. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Systemmanager gesperrt !!!'(225).
ENDIF.
ENDIF.
ENDIF.
LOCK = '.'.
UNLO = '.'.
ENDMODULE.
MODULE D400_CLEAR_CODE *
Passwortfeld loeschen. *
MODULE D400_CLEAR_CODE OUTPUT.
CLEAR XU400-NEWCODE.
CLEAR XU400-NEWCODE1.
ENDMODULE.
MODULE D400_SETSTATUS *
PF-Status setzen *
MODULE D400_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 400.
ENDMODULE.
MODULE D500_SUPPRESS *
Dynpro unterdruecken *
MODULE D500_SUPPRESS OUTPUT.
SET PF-STATUS '0200'.
SUPPRESS DIALOG.
ENDMODULE.
*& Module D214_SETSTATUS OUTPUT
MODULE D214_SETSTATUS OUTPUT.
SET PF-STATUS '0214'.
SET TITLEBAR '214'.
ENDMODULE. " D214_SETSTATUS OUTPUT
*& Module D216_PROFOUT OUTPUT
MODULE D216_PROFOUT OUTPUT.
COUNTX = XU213-TOPIX2 + SY-STEPL - 1. "Bild-oben-Pos. in Tab. festst
IF COUNTX <= XU213-FILL2. "Am Ende der Tabelle ?
READ TABLE INTPRO2 INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING INTPRO2 TO XU213. "Daten auf den Bildschirm
ENDIF.
ENDIF.
ENDMODULE. " D216_PROFOUT OUTPUT
*& Module D504_STATUS OUTPUT
MODULE D504_STATUS OUTPUT.
SET PF-STATUS '0504'.
SET TITLEBAR '604'.
ENDMODULE. " D504_STATUS OUTPUT
*& Module D217_SETSTATUS
MODULE D217_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 217.
PERFORM MESSAGE.
IF FERTIG = -1.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE. " D217_SELECT OUTPUT
*& Module D202_SETSTATUS OUTPUT
text *
MODULE D202_SETSTATUS OUTPUT.
SET PF-STATUS '0203'.
SET TITLEBAR '203'.
ENDMODULE. " D202_SETSTATUS OUTPUT
*& Module D200_LESEN_MEMORY OUTPUT
Schnittstelle mit RSUSR008
call transaction su01 and skip first screen
MODULE D200_LESEN_MEMORY OUTPUT.
IMPORT FCODE FROM MEMORY ID 'OK_CODE'.
EXPORT FCODE FROM SPACE TO MEMORY ID 'OK_CODE'.
ENDMODULE. " D200_LESEN_MEMORY OUTPUT
"$$
10.
*& Report ZSAPMS01J *
23.10.92
set extended check off.
INCLUDE ZMS01JTOP.
*INCLUDE MS01JTOP. "Datendeklarationen
INCLUDE ZMS01JO10.
*INCLUDE MS01JO10. "PBO-Module
*INCLUDE ZMS01JI10.
INCLUDE MS01JI10. "PAI-Module
*INCLUDE ZMS01JF10.
INCLUDE MS01JF10. "Forms
*INCLUDE ZMS01JR10.
INCLUDE MS01JR10. "Reporting
*INCLUDE ZMS01CC10.
INCLUDE MS01CC10. "Checks
*INCLUDE ZMS01CD10.
INCLUDE MS01CD10. "Datenzugriffe
set extended check on.
see there are in total 10 prog that should go in one trasport order. this will creat data file and co file. these are flat files. i want these flat files.
do it in developement server or testing server and then delete it or revert it once you get data file or co file.
i will greatful to u if you could send me these flat files.
thanx in advance
raj

hi all,
this can be done in 4.6 version also.
thanx for spending time on this.
thanx&regards
raj

How can i make shorten systemlog files and joblog files on OS

Hello
How can i make shorten systemlog files and joblog files on OS

Hello Jan,
You can limit the size of system log.
The size of the application server's System Log is determined by the
following SAP profile parameters. Once the current System Log reaches
the maximum file size, it gets moved to the old_file and and a new
System Log file gets created. The number of past days messages in the
System Log depends on the amount/activity of System Log messages and the
max file size. Once messages get rolled off the current and old files,
they are no longer retrievable.
rslg/local/file /usr/sap/<SID>/D*/log/SLOG<SYSNO>
rslg/local/old_file /usr/sap/<SID>/D*/log/SLOGO<SYSNO>
rslg/max_diskspace/local 1000000
rslg/central/file /usr/sap/<SID>/SYS/global/SLOGJ
rslg/central/old_file /usr/sap/<SID>/SYS/global/SLOGJO
rslg/max_diskspace/central
Refer to http://help.sap.com/saphelp_nw70/helpdata/EN/c7/69bcbaf36611d3a6510000e835363f/content.htm
for explanation of profile parameters.you can reduce the size of system log using rslg/max_diskspace_local and rslg/max_diskspace_central
But you can't reduce the size of job log files on OS
Rohit

Generation of .ecs file and .xsd file

Hi,
I am working on the Acme-GlobalChips tutorial Query using File 1.0 protocol.
I have few question on that.
While creating the Business actions and Trading partner IN B2B we use two 850.ecs and 850.xsd.Can these be used for all the trading partners or they are partner specific.If not then do we develop it using Document Editor.
Moreover if after we create the .ecs using the tool can we generate the .xsd file using same tool.
I have this doubt because I used the .ecs file provide with the tutorial and used EDI file provide by some other partner it worked.I mean I was able to generate the EDI-Xml as payload in reports section of B2B.
Can some help me on this.
Regards
Lalit

Hi Lalit,
1. Yes. Different Trading partners can use the same Business action. However, you can also override the .ecs file and .xsd file as per your requirement.
2. We can also generate .xsd files using the Document editor.
Regards,
Dheeraj

Installing Windows 7, 8 and 8.1 using ISOs, Answer Files and Driver files over PXE boot

I have a validation lab that uses Windows 7, 8 and 8.1 on several completely different systems. I am looking for an easy way for the techs to PXE boot from a 2012 Server, select the OS to install and have the OS installed with drivers so when they come back
to the system it has the OS installed with no Bangs in Device Manager.
I have done this in the past (7-8 years ago) and it was fairly easy. Now from what I read it appears I have to create "Image" files for each system type? I hope I am misreading this because that method is counter-productive to create 10 different
images for 10 different systems.
I thought I used WDS and AIK on a 2K3 Server but I don't remember.
Is there a method/tool to install the operating systems as I described above using original OS ISOs, unattended answer files and driver files? WDS or SCCM? AM I misreading how it works?

Consider using newer Windows ADK
http://www.microsoft.com/en-us/download/details.aspx?id=39982

Table files and Index files 2GB on Windows 2003 Server SP2 32-bit

I'm new to Oracle and I've ran into the problem where my Table files and Index files are > 2GB. I have an Oracle instance running version 10.2.0.3.0. I have a number of tables file and index files that have a current files size of 1.99GB. My Oracle crashes about three times a week because of a "Write Fault/Failure. I've detemined that the RDBM is trying to write a index or table files > 2GB. When this occurs it crashes.
I've been reading the Oracle knowledge base that it suggest that there is a fix or release of Oracle 10g to resolve this problem. However, I've been unable to locate any fix or release to address my issue. Does such a fix or release exist? How do I address this issue? I'm from the world of MS SQL and IBM DB2 and we don't have this issue. I am running and NTFS files system. Could this be issue be related to an Windows Fix?
Surely Oracle can handel databases > 2GB.
Thanks in advance for any help.

After reading your response it appears that my real problem has to do with checking pointing. I've included below a copy of the error message:
Oracle process number: 8
Windows thread id: 3768, image: ORACLE.EXE (CKPT)
*** 2008-07-27 16:50:13.569
*** SERVICE NAME:(SYS$BACKGROUND) 2008-07-27 16:50:13.569
*** SESSION ID:(219.1) 2008-07-27 16:50:13.569
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
error 221 detected in background process
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Can you tell me why I'm having issues with checking point and the control file?
Can I rebuild the control file if it s corrupt?
The problem has been going on since April 2008. I'm takening over the system.
Thanks

Printing messages in Log File and Output File using Dbms_output.put_line

Hi,
I have a requirement of printing messages in log file and output file using dbms_output.put_line instead of fnd_file.put_line API.
Please let me know how can I achieve this.
I tried using a function to print messages and calling that function in my main package where ever there is fnd_file.put_line. But this approach is not required by the business.
So let me know how I can achieve this functionality.
Regards
Sandy

What is the requirement that doesn't allow you using fnd_file.put_line?
Please see the following links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Dbms_output.put_line+AND+Log+AND+messages&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=%22dbms_output.put_line+%22+AND+concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to convert a Form to a Text file and XML file?

Hi:
I want to convert a Form to a Text file and XML file,but I don't know how convert?
Please help!
Oracle Form Builder V10.1.2.0.2
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
Thanks in advance!

..or follow the steps in Mtalink note; Doc ID: Note:196924.1
Forms XML Conversion Feature ( Converting Forms To XML)

Diff between Log files and Trace files

hi
What is the exact differences between Log Files and Trace Files.
And the relevant informative URL/reference materils would be highly appriciated.
Thanks
Sekhar

Hi,
Go through these,
http://help.sap.com/saphelp_nw04/helpdata/en/d1/7b1e40777cdd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0bf8c890-0201-0010-8b8c-fc93fa1f4795
Hope it clarifies
Regards
Srinivasan T

Enable video file and image file thumbnails WITHOUT enabling thumbnails for other filetypes

Hello. I am new to Mac and pulling my hair out at some of the limited UI options
I am wanting my image-files and video-files to appear in Finder (desktop etc) as thumbnails
However, I DON'T want PDFs, Excel, Word, PowerPoint files to have a preview thumbnail
Basically how things are now either way, it's very cumbersome visually to distinguish between file-types while cruising around my folders with a quick glance.
if thumbnail previews are on for all, its hard to tell at a quick glance which are PDFs, Excel files vs. images
similarly, the little "pdf" or "xlsx" or "docx" text overlay on these previews is so small and non-color coded as to be useless for quick-glance recognition of which filetype
if thumbnails are off, it's impossible to glance at files in a folder and know which image or video each is without wasting my precious miliseconds clicking on them, or trying to actually read truncated filenames
Here are some possible solutions which I hope somebody knows how to do:
globally enable or disable icon previews by filetype (preferred)
stipulate adding overlayed mini icons to certain filetypes
example: if it's a pdf, show the icon preview, but overlayed on that would be the red Adobe pdf icon/logo roughly a quarter of the size of the file icon (like is possible in Windows 7).
this way image and video previews can be seen at a glance, but having a big red or green or blue logo makes for immediate recognition of filetype
(least prefered but could help) ...somehow change the font color and increase the font size of the overlayed "pdf" "xlsx" "doc" "pptx"currently standard on these filetypes while showing icon preview but ALL are miniscule black text no matter which filetype
I'm quite dumbfounded right now that something for better immediate-glance filetype recognition isn't standard, or at least easily Google'able. All I've found is the Either/Other bamboozle.
Would love it to hear of a solution for this. Thanks all.

Put all of your separate flash movies into one move, and then
use flash to
load the movies into a top section of the flash document.
Your site (this page) sounds like it would be best viewed
entirely in Flash
(at least easiest w/o reloading).
Jon
"zachmundy" <[email protected]> wrote in
message
news:earmgn$q95$[email protected]..
>I have a bunch of flash videos that i've created
thumbnails for. I have
>one
> big cell on the top of the page that displays a video
and a bunch of small
> cells below that hold the thumbnails and descriptions of
other videos.
> When a
> user clicks on one of the videos, I want it to load that
video into the
> large
> cell on the top of the page all without
regenerating/refreshing the page.
> Is
> this possible in dreamweaver? What do I need to code the
thumbnail
> buttons to
> do in order to make this happen?
> Thanks
>

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?
I created project in iMovie then exported it to MP4 and also MOV file at highest definition possible + I added it to iDVD and had a number issues about encoding errors regarding the mp4 file. MOV worked but the quality was terrible.....
MOV file is as follows:
4.08GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1920 x 1080
Duration: 12:33
Audio Channels: 2
MP4 File is as follows:
3.02GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1280 x 720
Duration: 12:33
Audio Channels: 6
I have a MacBook Pro using the Yosemite system upgrade.
I have updated iDVD and iMovie.
I even bought the iSkysoft app from the mac store and that was terrible too.
PLEASE HELP i am getting desperate and about to launch this macbook into the air
2.66 GHz Intel Core i7
Version 10.10. 2

First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug

Load data with SQL Loader link field between CSV file and Control File

Hi all,
in a SQL Loader control file, how do you specify link with field in CSV file and Control file?
E.g. if I wat to import the record in table TEST (col1, col2, col3) with data in csv file BUT in different position. How to do this?
FILE CSV (with variable position):
test1;prova;pippo;Ferrari;
xx;yy;hello;by;
In the table TEST i want that col1 = 'prova' (xx),
col2 = 'Ferrari' (yy)
col3 = default N
the others data in CSV file are ignored.
so:
load data
infile 'TEST.CSV'
into table TEST
fields terminated by ';'
col1 ?????,
col2 ?????,
col3 CONSTANT "N"
Thanks,
Attilio

With '?' mark i mean " How i can link this COL1 with column in csv file ? "
Attilio

How to add wsdl files and bpel files in new folders automatically

Hi All,
In our project, we have a lot of wsdl files and bpel file generated.
By default, they are all under the folder of SOA Content, like a mess.
I want to put them in separate folders.
I can manually change the wsdl location and manually change references to these wsdls, but it will take a lot of extra time to do so.
Is there a way to achieve this in UI?
Thanks and Regards!
Bruce

Hi Eric,
Thanks for your reply!
I can use refector->move to move the wsdl file to newly created folders.
But unfortunately, JDeveloper won't update the references to the wsdl files.
I have to update the references manually, and it will take a lot of time if there exists many wsdl files in one project.
Thanks and Regards!
Bruce

8dot3 filenames not created for Program Files and Program Files (x86)

Interesting issue we are realizing on Servers deployed from SCCM 2012. 8dot3names are not created for Program Files and Program Files (x86). they are created for other files/folders at the root of C and below Program Files and Program Files (x86). This is
causing issues when programs are installed and the path is then created with 8dot3 filenames for program files and program files (x86)

Arg. we just got bitten by this "feature", and it's affecting our security software stack (name starts with M and ends with ee), and some ancient crud too.
And found this, which suggests a logical reason for 8dot3name to not be present on servers, but, on clients, I think it's a rather gross assumption...
http://blogs.technet.com/b/josebda/archive/2012/11/13/windows-server-2012-file-server-tip-disable-8-3-naming-and-strip-those-short-names-too.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

System Center 2012 R2 install: SQL server Data file and log file

This might be a dumb question, but I can't find the answer anywhere.
I'm installing a new instance of System Center 2012 R2 on a new server, I'm stuck on the SQL Server data file section. Everytime I put in a path, it says that tne path does not exist. I'm I supposed to be creating some sort of SQL Server
data file and log file before this installation, I didn't get this prompt when installing System Center 2012 SP1 or hen I upgraded from System Center 2012 SP1 to System Center 2012 R2
My SQL is on a different server
Thank you in advanced

Have you reviewed the setup.log?
On a side note, why would you put the database file on the same drive as the OS? That defeats the whole purpose of having a remote SQL Server. Why use a remote SQL Server in the first place.
Jason | http://blog.configmgrftw.com

Import dimension and member via maxl, how to create data file and rule file

Hi
I have a task to import dimension and member into Essbase, for project requirement, I have to use text file or spreadsheet file.
I wonder which format can be imported into Essbase?
I tried to create them, failed.
Do you have any samples to help me? dimension file and rule file...
I search a lot in http://gerardnico.com/wiki/epm/essbase/dimension_build#about , but there are no samples.
Thanks in advance...
Best regards,
Samantha

import database Sample.Basic data from data_file 'C:\TEMP\GENREF.txt' using rules_file 'C:\TEMP\GENREF.rul' on error append to 'C:\TEMP\logs\dimbuild.log';Here issue is not with rulefile but in reading the rule file.
I hope rule file is in the database directory (By default it will get saved there only)
Try with the below command
import database Sample.Basic data from data_file 'C:\TEMP\GENREF.txt' using server rules_file 'GENREF' on error append to 'C:\TEMP\logs\dimbuild.log';
Rule file also had one issue
Market, Product, Measures, Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, DecHere I am seeing only four dimensions from the Sample.Basic database
Scenario is missing. So define Actual (Scenario Dimension member) in the rule file header definition.
All dimensions must be identified to parse one data file with rule file.
PS: Naming (GENREF) is also irrelevant if you are loading data. It is apt for dim load.

IDOC to Flat file and Flat file to IDOC

Similar Messages

Maybe you are looking for