IDoc to HTTP using BPM

Hi,
My Requirement is IDoc(Async)HTTP(sync)-IDoc(Async) using BPM
and there is a condition if i will not get response from HTTP then i need to send error message to ECC(IDoc).
could you please provide me details steps in IR and ID.
Thanks
Girii

HI,
please go through below blog instead of file you are using IDoc and instead of rfc you are using HTTP,
http://wiki.sdn.sap.com/wiki/display/XI/FILETORFCTOFILEwithBPM
regards,
ganesh.

Similar Messages

Multiple IDocs to File using BPM

Hi All,
I have configured a scenario of multiple IDocs to file using BPM. In this scenario while I am triggering IDoc from R/3 system it is sent to the external program. I am getting in the status record of WE05 as IDoc is sent to an external system with status code 03. But I am unable to view the same message in moni of the XI system.
Also I have checked the ALE settings on both the sender and receiver side and it is fine.
Also in SM58 nothing is there in queue.
Can anyone solve this issue of mine?
Cheers,
Neethu.

Hi,
in many cases it's a problem with the RFC connection. You should try an authorization test in SM59 of the R/3 system.
This might also be useful:
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Patrick

Idoc to soap using BPM

Hi,
Plz give inputs/blogs link to do this scenario.
i want to send idoc from R3 to web service(SOAP) using BPM bec i want to get the response.
how many Message Interface i need to develop for this?
Edited by: ruban R on Apr 1, 2008 12:29 AM
Edited by: ruban R on Apr 1, 2008 12:39 AM

Hi,
These Steps may help you
Design objects:
Data type & Message Type
1) Import the IDOC and Later you import the Idoc, doble click on it a export it to your driver, next import it as External Definition for reason becouse if not, you wont be able to create a MI type synch with IDOC and genericResponse structure
2) Create data type for your Response Type of IDOC
3) Import the WSDL File For Request and the Response Type
4) Create the Message types according to the Data types which we created
Messgae Interface:
1) Outbound synchronous:
    output message will be ur idoc external definition file
    input message will be ur message type that u have created.
2) Abstract Outbound Synchronous:
    use the same as in Outbound Synchronous
3) Inbound Synchronous:
    input message will be ur request message of RFC/WebService
    output message will be ur response message of RFC/Webservice
4)Abstract Inbound Sunchronous:
    input message will be ur request message of RFC/WebService
    output message will be ur response message of RFC/Webservice
Mapping
Request Message Mapping:
b/w ur idoc external definiton and request message of RFC/WS
response Message Mapping:
b/w ur Response message of RFC/WS and ur message type
Interface Mapping
Import MI(abstract) of IDOC
Import MI of WS
select the mapping for request and response Tab
BPM
1) In container window define a variable named IDoc_ABS with category abstract interface and
    type (select the MI of IDOC alone)
   define a variable named GenericRespnse_abs with category abstract interface and type (select
   MI of genericResponse alone)
2) Create a Recieve Step --> in property message select the container you define before of idoc.
3) Define a Send Step--> mode synchronous
    select MI type abstract and sync (idoc and genericResponse)
    for property request message selects container Idoc_ABS
    for property response message selects container GenericRespnse_abs.
Save your Changes and thats all for BPM
Configuration
1) Create scenario
    Assign BS and create comunication channels with QoS (quality of service) type BE
2) Import your BPM
   Create a Receiver Determination
-->in the target service select the BPM. Save
-->In overview windown at foot windowns select MI IDoc_abs only. nothing else
Create a Receiver Determination
-->here the system who send data is BPM
-->in the target service select the BS of receiver system.Save
-->In overview windown at foot windowns select interface mapping and assing communication channel
what we do here. the flow is next
1) Receive data from sender system and send it to BPM
2) BPM call bs of target system (WS). how? because in interface determination you selected
   before the interface mapping
Regards
Seshagiri

IDoc to HTTP: Using acknowledgments

Hi friends.
I know the HTTP Adapter does not support acknowledgments.
But we had a scenario in which we send an IDoc from SAP and transformed it in a HTTP Call.
We get back to the SAP system a aleaud Ack IDoc from PI. It reports that the communication between SAP and PI works.
The ack was not for the sucessfully or unsucessfully HTTP call.
Now we updated our PI 7.0 system from service level 12 to 20.
Since the update there comes no ALEAUD IDoc back.
Any replies to that problem?
Thanks!!!
Stefan

HI,
please go through below blog instead of file you are using IDoc and instead of rfc you are using HTTP,
http://wiki.sdn.sap.com/wiki/display/XI/FILETORFCTOFILEwithBPM
regards,
ganesh.

Idoc to Webservice using BPM

Hi
I am using the BPM for the IDOC to Webservice Synchronous Scenarion...
When i trigger the IDOC from SAP it stuck in the Queue ...when i checked in the SXMB_MONI and when i clicked in PE it taking me to the INbound Queue ..
When i opened the Queue its showing the SYSFAIL ..and when i double click on that its shoes me Permanent ERRor in BPE Inbound Processing..
In BPM i used the Receive and Send Synchronous and Send Asynch steps ..
Did i miss Any thing
SV

HI,
I think for IDOC to Webservice you are going for Async to Sync bridge with BPM and have the similar steps as mentioned in below link.
Asyn - Synch BPM - Async/Sync Communication using JMS adapter without BPM (SP 19)
If there is some other flow plz let me know. Also let me know the exact error that you are facing with it.
Thanks
Swarup

IDoc u2013 HTTP Using SAP BC

Hi Experts,
I want to create the following scenario using SAP Business Connector.
SAP system sends an IDoc asynchronously to SAP BC. The SAP BC converts the IDoc into a standard IDoc XML document. After the conversion the SAP BC sends the XML document synchronously to an external URL of a business partner via HTTP.
Can anyone provide me with a document consisting of all the steps involved for the above configuration, right from SAP system to BC system.
Thanks & Regards,
Amit

hi,
so you're doing rosseta
>>can you please let me know from where can i get this file????
the lastest version of best practices cd can be downloaded from:
service.sap.com/swdc
then path:
Installations and Upgrades" SAP Best Practices" SAP BP FOR HIGH TECH" HIGH TECH - V1.600
but it's for 1.600 version and you're file should be for V1.471
so maybe you need to ask SAP where to download it if V1.600 DVD will not work
but try the link
Regards,
Michal Krawczyk

Collect Multiple IDOC(Single IDOC type) to single file using BPM

Hi All,
When i am generating multiple IDOC for the same message type, i am getting multiple payload for the same as a result i used to get multiple files generated in application server.
Now if i use BPM only to collect multiple IDOC to a file then what all the steps that i need to follow for the same.
Ex: I want to post 10 IDOC for a single IDOC type,, Now using BPM in XI i want to collect all the 10 IDOCs with multiple payload into one single message and then want to process this in XI to generate the file.
It would be glad if anyone refer me a good step by step blog for the same.
Thanks in advance,
Jay

Thanks a lot Abhisek.
I have also got a blog explaining the exact thing. But in the blog the ID part was missing which is present in the link you have provided.
I will be glad if you can through some light on the ID part,, however the IR part and the BPM part is now mostly okay to me.
I will configure this today only,, and may seek your help for any huddle.
Thanks a lot once again.
Regards,
Jay.

Processing large volume of idocs using BPM Processing

Hi,
I have a scenario in which SAP R/3 sends large volume say 30,000 DEBMAS Idocs to XI. XI then sends data to 3 legacy systems using jdbc adapter.
I created a BPM Process which waits for 4 hrs to collect all the idocs. This is what my BPM does:
1. Wait for 4 hrs Collect the idocs
2. For every idoc do a IDOC->JDBC Message transformation.
3. Append to a Big List
4. Loop at the Big list from step 4 and in the loop for
5. Start counter from 0 and increment. Append to a Small List.
6. if counter reaches 100 then send a Batch JDBC Message in send step.
7. Reset counter after every send.
8. Process remaining list i.e if there was an odd count of say 5300 idoc then the remaining 53 idocs will be sent in anther block.
After sending 5000 idocs to above BPM following problems are there:
1. I cannot read the workflow log as system does not respond.
2. In the For Each loop which loops through the big list of say 5000 idocs only first pass of 100 was processed after that the workflow item is not moving ahead. It remains in the status as "STARTED" but I do not see further processing.
Please tell me why certain Work Items are stuck is it becuase I have reached upper limit and is this the right approach? The Main BPM Process is also hanging from last 2 days.
I have concerns about using BPM for processing such high volume of idocs in production. Please advice and thanks in advance.
Regards
Ashish

Hi Ashish,
Please read SAPs Checklist for proper usage of BPMs: http://help.sap.com/saphelp_nw04/helpdata/en/43/d92e428819da2ce10000000a1550b0/content.htm
One point i'm wondering about is why do you send the IDocs out of R/3 one by one and don't use packaging there? From a performance stand point this is much better than a bpm.
The SAP Checklist states the following:
<i>"No Replacement for Mass Interfaces
Check whether it would not be better to execute particular processing steps, for example, collecting messages, on the sender or receiver system.
If you only want to collect the messages from one business system to forward them together to a second business system, you should do so by using a mass interface and not an integration process.
If you want to split a message up into lots of individual messages, also use a mass interface instead of an integration process. A mass interface requires only a fraction of the back-end system and Integration-Server resources that an integration process would require to carry out the same task. "</i>
Also you might want to have a look at the IDoc packaging capabilities within XI (available since SP14 i believe): http://help.sap.com/saphelp_nw04/helpdata/en/7a/00143f011f4b2ee10000000a114084/content.htm
And here is Sravyas good blog about this topic: /people/sravya.talanki2/blog/2005/12/09/xiidoc-message-packages
If for whatever reason you can't or don't want to use the IDoc packets from R/3 or XI there are other points on which you can focus for optimizing your process:
In the section "Using the Integration Server Efficiently" there is an overview on which steps are costly and which steps are not so costly in their resource consumption. Mappings are one of the steps that tend to consume a lot of resources and unless it is a multi mapping that can not be executed outside a BPM there is always the option to do the mapping in the interface determination either before or after the BPM. So i would sugges if your step 2 is not a multi mapping you should try to execute it before entering the BPM and just handle the JDBC Messages in the BPM.
Wait steps are also costly steps, so reducing the time in your wait step could potentially lead to better performance. Or if possible you could omitt the wait step and just create a process that waits for 100 messages and then processes them.
Regards
Christine

Idoc(receiver) message splitting using BPM

Hi,
could you provide some blogs which is useful for Idoc (as a Receiver) message splitting (1:N scenario) using BPM.
I have gone thru some of the Blogs, i didn't find good one according to this scenario.
Thanks
Praba

Hi Michal,
Thanks for ur reply.
You said " if you have one message and want to have multiple IDOCs
there is no need for a BPM -
you just need to change IDOC occurance - that's all"
I agree to your point.
My scenario is more or less same but "With single message , i need to generate multiple Idocs" based on synchronous proxy response from R3. That is the reason we already gone with BPM.
Already i used the BPM in my interface due to req. It was working. Earlier i was posting single Idoc to R3 with multiple Header segment (each Header segment has one quantity)
Now due to req. change, for each single quantity (quantity is my source Message Type field), i need to post single Idoc to R3 if i get response from R3.
My XI version PI 7.0 SP14
Idoc structure:
   <xsd:attribute name="SEGMENT" type="xsd:string" fixed="1" use="required"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
   </xsd:complexType>
- <xsd:complexType name="WPUWBW.WPUWBW01";>
- <xsd:annotation>
   <xsd:documentation>POS interface: Upload goods movements</xsd:documentation>
   </xsd:annotation>
- <xsd:sequence>
<xsd:element name="EDI_DC40" type="EDI_DC40.WPUWBW.WPUWBW01"; />
   <xsd:element name="E1WPG01" type="WPUWBW01.E1WPG01"; minOccurs="0"
   maxOccurs="9999999999" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
   </xsd:sequence>
   <xsd:attribute name="BEGIN" type="xsd:string" fixed="1" use="required"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
   </xsd:complexType>
   </xsd:schema>
Already I am using this Idoc structure in various interfaces also. If i edit the occurance of the this Idoc and import in External definition with same name, I feel it afffect mapping in other interfaces also.
Inputs are highly appreciated.
Edited by: Prabaharan Rangasamy on May 22, 2009 4:14 PM

Collection of IDOCs using BPM

Hi Experts,
I am trying collection of IDOCs by using BPM.
I ran into problems and In moni, the error is
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
Details of above error in trace is :
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface BLAORD.BLAORD03*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface UpdatedContracts_abs_idocs*</Trace>
<Trace level="1" type="T">select interface namespace http://com/UpdatedContracts/</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA" />
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
Here i am trying to collect IDOCs for 5 minutes and i need to send them in XML format. Here i have mapping logic and that logic is working perfectly.
What i am dong is
1. I am sending IDOCs from R3 system to BPM in XI. ( Here to push IDOCs from R3 system to BPM, do we need to do extra ALE settings. Actually With out BPM simple IDOC to File is working fine, With BPM only i am having error. )
2. How to reslove above problem. AS per my understanding everthing is fine.
Thanks,
Subbu

Hi Rama Subbarao,
Error: Check with your loop condition and process steps.
Collecting of IDOCS using BPM is good, If u want to send the 100 IDOCS per one hour with single BPM it will takes times , Some performs issues and hardware issues are raising.
Suppose if u send 1000 Idocs per one hour it will takes much time.
Other Process:
The collecting of IDOCS it will be downloaded into FILE System.Once IDOCS is downloaded into FILE, it will be not changed the IDOCS.
Using FILE Adapter we send the flatfiles data from FILE System to XI. if u using this process performance wise its very good.
Regards,
Sateesh N

Bundling of IDOCs using BPM.PLS Help .Its very very URGENT

Hi all,
I have a IDOC to file scenario in which I have to bundle some number of INVOIC02 IDOCs.
For this I have an IDOC whosw occurance is 1...1.
I have an XSD for the same IDOC whose max occurance is 1.....9999999999.
Si I have created one mapping for these two(i.e IDOC with max occurs 1 and IDOC with max occurs 9999999999.)
I created one more mapping for IDOC XSD and the target file structure.
For this scenario how many abstract interfaces and interface mappings do I need to create?
Can anybody explain the BPM flow in detail in this case?
Thanks in advance.

Hi Rambabu Mujja ,
The following websites wil solve u'r problem:
A Step-by-Step Guide on IDoc-to-File Using Business Service in the XI Integration Directory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
How to convert an IDoc-XML structure to a flat file and vice-versa in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Introduction to IDoc-XI-File scenario and complete walk through for starters.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
IDOCs (Multiple Types) Collection in BPM
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
cheers!
gyanaraj
****Pls reward points if u find this helpful

Posting Purchase Orders (IDOC Adapter) according to Vendor using BPM's

Hi,
My requirement is to post purchase orders into SAP r/3 according to vendor wise using IDOC adapter using BPM's.
Input is a FLAT File which contains all the Purchase order items/records for various vendors.
We need to process these items/records according to vendor and post it into SAP r/3 using IDOC Adapter within 8hrs processing time(Time Bound).
What i mean is: the process should collect all respective vendor related items/records from the flat file and post respective purchase orders in SAP. That means if 5 items out of 20 are from one vendor, we shud create a PO in SAP with 5 items for that vendor and likewise for the rest of the items.
Please explain the procedure and detail Mapping in step by step procedure... how to send 'n' items for a PO.
Regards,
Ravi

for idoc configuration refer
https://wiki.sdn.sap.com/wiki/display/XI/SAP+R3+%28Idocs%29+To+XI+--+Steps+Summarized
Source WIKI. As far as BPM is concerned, set the correlation based on vendor number. this will ensure u collect the message according to vendor number.
there are two option set for ur for posting the PO WRT vendor number:
1. using BAPI
2. using idocs
The mapping for both the methods are straight forward except care need to be taken for mapping the data segment esp WRT the vendor number.

Asynchronous, but need Ack without using BPM and IDocs.

Hi Experts,
                 I would like to do a scenario i.e., "Asynchronous communication, but need Acknowledgement without using BPM and also without using IDocs whether it is sender side or receiver side". Please help me.
Thanks in advance
Srihari.

Without using BPM will be little longer process. But the alternative way is to add one more receiver in the receiver determination and send some file to that location with the actual mapping getting executed for the actual receiver. and in the second interface you can get the file created at second receiver back to the source location. But this will be little long as compared to synchronous scenarios.
Flow:
Source
          Receiver 1--> Actual mapping as per requirement
          Receiver 2(For Ack)--> Create a mapping with blank file sent to Receiver
Receiver 2-->File Adapter--> Source through 2nd mapping/interface and keep the File adapter pooling interval around 5 sec or less so that you can get the file back to source location.
Regards
Anand

File to Idocs using BPM

Hi,
Current Interface Flow - File (xml) to Idoc (single Idoc type)
Thirdparty sends a File for Goods Receipt. This file may have multiple orders.
Orders are sorted in an xslt by ORDNUM. Each record has a delivery type (Deliver Type PO or Delivery Type STO). For each order Graphical Message mapping occurs.
In case of PO, inbound delivery number and item number have to be received from ECC via an RFC call and passed to VBELN and POSNR. While in case of STO, source field ORDNUM and ORDITEM are passed to VBELN and POSNR. (RFC call happens only for POs, not for STOs)
In case of STO, TCode will be MB0A.and IDoc would be WMMBXY (As is the case right now)
In case of PO, there may be two cases -
a) There is at least one response from ECC for all the line items inside an order --> in this case TCode will be MB0A and IDoc is WMMBXY .
b) If there is no inbound delivery number for any line item from ECC inside an order --> TCode MB01 will be used and IDoc used is WMMBXY
So for all the above cases Target IDoc is WMMBXY.
Changes to be done - Now File (xml) to Idoc (Two different Idoc types, WMMBXY and DELIVERY03)
Now there is an additional requirement that I will be using an additional IDoc (DELIVERY03) in above case a).
I want to use BPM in this case
1) RFC call in message mapping to get the inbound delivery number (for POs only) (Should be before the message enters BPM)
2) Separating the messages based on IDoc type
3) Interface / Message mapping for each IDoc type
4)Send the message to ECC
Please suggest how to proceed with BPM
Thanks,
Varun
Edited by: Varun Reddy on Feb 4, 2011 4:47 PM

Hi Varun,
Follow this thread... You have answer for this.
This link gives design ideas for your requirement
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Follow Bhavesh discussion. It might be helpful too
Message Split: File to Multiple IDOC Types

Multi-Mapping in IDOC without using BPM ?

Hi ,
Please check ..
Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards
PS

Solved .. Thx every one .
Approache Used :
1. Created mapping with Change signature on target Message type(idoc) with 1..N Occurence.
2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

IDoc to HTTP using BPM

Similar Messages

Maybe you are looking for