IDOC to IDOC using IWay Adapter?
Hi,
I believe I have sent my post to the wrong forum. Sorry about that.
Can anyone here help? Please.
The post I am talking about is:
IDOC to IDOC using IWay Adapter?
P.S.: How can I move that post to the right forum?
Regards
Hi:
Well, the Oracle SAP Adapter will be an option for u.
There is one alternative withing the SAP Adatper, that allows u to present as Web Services (IBSE Servlet), operations available in SAP.
So, publishing Web Services with the Adapter, is definitely something u can do, and just wire them withing OSB.
More information for the Adatper is available, here: http://docs.oracle.com/cd/E14571_01/doc.1111/e17656/config.htm#XIPSA002
hope this helps
best
Similar Messages
-
How to Integrate XI with Peoplesoft using iWay Adapter
hi Friends,
This is Sreeni. I want to use iWay adapter for integrate Peoplesoft with XI.
can you please help me in this way.Hi,
There is a series of blogs that address this same area. Please look into them. they should surely help,
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i - Part I
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii - Part II
/people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii - Part III
Regards
Bhavesh -
Getting error when using iway adapter to access peoplesoft
i am using iway adapters to access peoplesoft but getting the following error:
Error in parsing the input
can anyone tell me what is the format of the input document or xml file that should be sent to the adapter inorder to access peoplesoft?Hi,
Try searching for:Re: 30EA2 - No Available Databases in Capture step with MS Access Migration
Thread: 30EA2 - No Available Databases in Capture step with MS Access Migration
Posted: Dec 20, 2010 11:04 AM
Also note that copy to oracle - (for just table/column information) is available on right click.
-Turloch
SQLDeveloper team -
Hi Friends,
Is there any possibilities to Convert IDOCs as XML using HTTP Adapter in SAP PI?
Because in my Scenario i need to send Idocs from ECC to Red Prariie using SAP PI.
Also is it there any possibilities using FTPS?
Please help me.
Thanks.Hi PIstarter,
Sure this is possible. Just treat the IDoc like any other Service Interface that you use in the HTTP Receiver Adapter. You can even use the no-mapping approach if no additional processing is required by PI.
Hope this helps,
Greg -
Integration with Peoplesoft using OA adapter
Hi
I am not experiened on integrating/consuming Peoplesoft functionality from external system/application/BPEL/OSB.
What i understood after reading few messages that Peoplesoft Intergration Broker can be used to expose Peoplesoft component interface as services which can be consumed/invoked by any system/application/BPEL/OSB.
But i have requirement from our client that he wants to replace Peoplesoft Intergration Broker with oracle fusion middleware stack. In that context, i think only solution would be using Oracle Application adapter for Peoplesoft to expose Peoplesoft component interface as service, and which can be later consume in OSB/BPEL.
Please suggest.Hi,
There is a series of blogs that address this same area. Please look into them. they should surely help,
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i - Part I
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii - Part II
/people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii - Part III
Regards
Bhavesh -
Hi,
Could you please tell me what are the advantages of using iWay adapter to integrate with Siebel?
Is it possible to use file or HTTP adapter to send data to Siebel? If yes, then why do we need iway adapter?
Thanks in advance...
Regards,
Vivek.Hi Vivek,
Basically u will have 3 transport protocols in Siebel iWay Adapter like File,MQ,HTTP.You can use any on of the transport protocol basing on the requirement.
Please see the below threads
iWAY
IWAY Adapter(siebel): Error while using Applicaiton Explorer
Integrating JDEdwards system with XI using IWAY adapter part - I
Integrating JDEdwards system with XI using IWAY adapter part - III
Integrating JDEdwards system with XI using IWAY adapter part - II
XI to mainframe adapter
B2B Adapters
step by step procedure to configure a BAAN adapter
Siebel - http://www-128.ibm.com/developerworks/rational/library/05/419_siebel/index.html
Push Data to MVC Architectured application using XI
Invoke Webservices using SAPXI
Testing XI exposed Web-Services
Regards,
Vinod. -
I want to use iway adapter in xi for integration of peopleSoft system.
if anyone knows about how to use external or Third party adapter.
This will help me a lot.
GauravHi ,
These links will help you..
How to create RFC destination for 4.6c
Re: XI integration with Peoplesoft
Sekhar -
HI Experts,
I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to vendor. Can you please help me on the same?
Thanks
SaiSreevastavHi Sai,
you can use XSLT or java mapping or adapter module to convert IDOC xml to XLS. Please refer the below blog
Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way
Convert incoming XML to Excel Sheet Part 2 – Adapter Module way
Convert incoming XML to Excel Sheet
then after converting to Excel, you can use the payloadswap bean in mail adapter
XI: Sender mail adapter - PayloadSwapBean - Step by step
regards,
Harish -
Regaring File to IDOC Useing SOAP Adapter
Hi ,
Can any one please forward me an File to idoc Useing SOAP ADapter Senario.IF i am wrong please send me a simple senario of useing SOAP Adapter.
Regd's
RajHi Raj,
I think i will give you some more information about SOAP adapters,So Please go through the link below and follow the steps mentioned in it while defining the web service.Then you will get to know the actual use of a SOAP adapter.
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/31/daa0404dd52b54e10000000a1550b0/content.htm">Defining Web Services</a>
Sending a Simple SOAP envelope to XI via HTTP using ASP
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1442 [original link is broken]
More links for SOAP Adapter:
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
http://help.sap.com/saphelp_nw04/helpdata/en/9f/fdca3f01f33e1ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
You can create SOAP Request from WSDL using the following tool.
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
You've to expose your outbound message interface as a WSDL which can be used by say EP.
Also go thru the following threads
Re: WebService
Re: SOAP Client for Synchronous Scenario
Re: How to test a webservice as a standalone?
Also check this Pdf for the Receiever SOAP Adapter configuration:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/40728f7b-0401-0010-d9bc-8c73884a3789
Regards,
abhy -
I'm trying to replace an existing Biztalk 2006 Send BOM IDOC process, and completely remove Biztalk server from the equation. The existing Bizatalk 2006 server receives an input BOM (Bill of Materials) flat file, and using a Biztalk Map (BM08),
and Orchestration, generates an Idoc and sends it to SAP.
In my replacement C# program, I'm using the 2010 WCF-SAP Adapter, and am trying to generate the BOMMAT03 XML IDOC it to SAP.
I generated the BOMMAT03 schema from SAP using the Add Adapter Service in VS 2010. I was able to generate a BM08 XSLT from the existing BMO8 map in the current Biztalk 2006 process. I am able to run a XSLT transform on the input BOM flat
file, and generate an XML file from that.
However, I've run into a few issues. First of which, is that the XML file that is generated from the XSLT transform is NOT the same schema as the BOMMAT03 schema expects. It's somewhat similar, but different enough that I have to manually
translate between the two in my code. I've verified that both the original Bitztalk 2006 process and my replacement program use BOMMAT V3 from SAP. Question--Is Biztalk 2006 server doing some other magic to turn that transormed XML into the BOMMAT03
schema?
I ended writing code which translates the transformed XML into the BOMMAT03 schema (which is a strong typed XML IDOC at this point).
However, when I try to send the BOMMAT03 XML IDOC, I get an exception "Object reference not set to an instance of an object."
idocClient.Send(idocData, ref sadapterTxGuid);
idocData is of type BOMMAT03, and I've verified that the various fields are populated.
Any help is appreciated.Well, putting in a MSDN subscription support ticket for Biztalk server actually helped with the issue. They didn't find, or fix the issue directly. But one of the examples (https://randypaulo.wordpress.com/tag/idoc/) they sent over, jogged my
memory, and I realized in the code snippet below, I had accidentally deleted the 1st line. Such a simple mistake, yet was easy to overlook. The URL example is almost EXACTLY like my code, but without the transform and translation code to convert
from input XML file to IDOC XML. If someone is interested in that, let me know.
//Forgot the 1st line.
idocClient = new IdocBOMMAT03SIEIS_WED_BOMMAT03V3R700Client(binding, endpointAddress);
idocClient.Send(idocData, ref sadapterTxGuid);
For anyone else interested in knowing, you CAN send a strongly typed IDOC to SAP using C#.NET and the WCF SAP 2010 Adapter, using the IDOC Binding Client class you generated using the Add Adapter Service Reference in VS2010.
The one difference, which no one, not even the tech support from MS could tell me, was why the XSLT which I generated from the original map, did not transform the input BOM XML into the BOMMAT03 XML. Instead, it transformed it into an intermediate
XML, which resembled the BOMMAT03 IDOC XML, but still needed to be translated to the BOMMAT03 IDOC format.
The tech support person swore up and down that it should. But I believe that something happens in Biztalk server, after the Mapping occurs, maybe in the Pipeline, which converts that
intermediate XML into the final BOMMAT03 IDOC XML format.
I do think that the examples are severely lacking in showing how to send a strong typed IDOC using C# and the WCF-SAP Adapter. Even worse, the examples are completely lacking in how to actually generate a weakly typed IDOC. They show how to send
that weakly typed IDOC, but show me, or give me a class to be able to generate it.
I realize that this is not quite the "recommended way" to do it, but in reality, not everyone wants or even needs a full Biztalk installation. For some simple stuff like this, a C#.NET program and WCF-SAP adapter do the trick. -
Adapter module in PI 7.1 EhP1 for Falt File Idoc to Idoc xml transformation
Hi Experts,
In PI 7.1 (EhP1) there is a java adapter module that can be added to the file adapter that automatically transforms Flat File representation of IDoc to IDoc XML. Can anyone provide the link to this particular module? Tried searching but could not get the specific module name or parameters.
The same conversion can be achieved using a standard SAP provided ABAP mapping but we need to use the module in this case.
Thanks and regards,
Shiladitya/people/william.li/blog/2009/04/01/how-to-use-user-module-for-conversion-of-idoc-messages-between-flat-and-xml-formats
FYI~~~ -
How to get IDoc Status from WCF Service Adapter?
I have successfully transfered a strong typed Idoc to SAP using a BizTalk WCF Service Adapter. I did so based on this example: [http://msdn.microsoft.com/en-US/library/cc185231(v=BTS.10).aspx]. We are using the IDoc to create a purchase order. The IDocClient.Send(idoc, ref guid); method returns only a guid. I can translate that using the SapAdpaterUtilities to a transaction ID. When I look at the Idoc in WE02, I can see that it has status information which includes the purchase order number. Is there any way for me to capture this status information in my .Net application when I send the IDoc? Can I query the transaction ID? Or do I just need to get the last PO Number through an RFC?
ScottI ended up using the SAP .Net Data Provider in the Biztalk Adapter Pack to retrieve the PO Number. Essentially when you pass the IDoc you won't get anything in return unless the file transfer fails.
Scott -
IDoc flat file over AS2 adapter to IDoc adapter
Hi,
The scenario is IDoc flat file(.txt) over AS2 adapter to IDoc adapter. Could anyone help on how to convert the IDoc flat file to xml in AS2 adapter to execute the mapping further? we are using PI 7.0.
Thanks in advance!
-zameerHi,
Since you are on Pi 7.0, you would not be able to use the modules for this in PI 7.1.
You would need to refer this document for converting from Idoc flat to XML
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a?quicklink=index&overridelayout=true
In your sender AS2 adapter, you can pass the file as is to an abap mapping which will do the conversion to Idoc xml. the output of the abap mapping goes to your message mapping then for conversion.
Another option would be to use a custom adapter module in the sender AS2 adapter to call the Aabap mapping to do the conversion into Idoc xml.
The custom adapter module would do a JCO/RFC call which will do the conversion before passing the data back to the adpter module.
Regards -
Hi
I am using the BPM for the IDOC to Webservice Synchronous Scenarion...
When i trigger the IDOC from SAP it stuck in the Queue ...when i checked in the SXMB_MONI and when i clicked in PE it taking me to the INbound Queue ..
When i opened the Queue its showing the SYSFAIL ..and when i double click on that its shoes me Permanent ERRor in BPE Inbound Processing..
In BPM i used the Receive and Send Synchronous and Send Asynch steps ..
Did i miss Any thing
SVHI,
I think for IDOC to Webservice you are going for Async to Sync bridge with BPM and have the similar steps as mentioned in below link.
Asyn - Synch BPM - Async/Sync Communication using JMS adapter without BPM (SP 19)
If there is some other flow plz let me know. Also let me know the exact error that you are facing with it.
Thanks
Swarup -
IWAY Adapter(siebel): Error while using Applicaiton Explorer
Hi,
I tried configuring iway adapter(Siebel) for XI to connect to Siebel system.
<b>Steps followed</b>
Deployed iWay Connector for XI, JCA TestTool and Deployed Application Explorer.
Configured iWay business service engine (File Repository).
When I use Application explorer and create a New Siebel target and try to connect, if get the error Problem activating adapter. I found the following in Error logs.... IWAY55\config\base\log, i found <b>aejca_XXX.log</b>
<i>Mon, 14 Aug 2006 11:00:23.0690 PDT - SAPEngine_Application_Thread[impl:3]_31 [info ] [IWAF JCA] [container] Using default: keystore.type=jks and keystore.password=iwaysoftware
Mon, 14 Aug 2006 11:00:23.0690 PDT - SAPEngine_Application_Thread[impl:3]_31 [info ] [IWAF JCA] [container] Security manager using keystore : /usr/home/xidadm/iWay55/config/base/security/keystore.jks
Mon, 14 Aug 2006 11:00:23.0695 PDT - SAPEngine_Application_Thread[impl:3]_31 [warn ] [IWAF JCA] [container] <b>Security manager will not be available due to problem.
java.lang.IllegalStateException: Problem loading keystore: java.io.FileNotFoundException: /usr/home/xidadm/iWay55/config/base/security/keystore.jks (No such file or directory); make sure the password is correct</b>
at com.iwaysoftware.security.KeyStoreUtil.getKeyStore(KeyStoreUtil.java:39)
at com.ibi.adapters.util.security.SecurityManagerImpl.<init>(SecurityManagerImpl.java:45)
at com.iwaysoftware.af.container.IWAFFactory.buildSecurityManager(IWAFFactory.java:209)
at com.iwaysoftware.af.container.IWAFContainer.start(IWAFContainer.java:169)
at com.ibi.afjca.spi.IWAFManagedConnectionFactory.getContainer(IWAFManagedConnectionFactory.java:492)
at com.ibi.afjca.spi.IWAFManagedConnectionFactory.createManagedConnection(IWAFManagedConnectionFactory.java:206)
at com.ibi.afjca.spi.IWAFConnectionManager.allocateConnection(IWAFConnectionManager.java:31)</i>
Is a keystore file mandatory..? It dosen't get created during standard installation. do we have to create it manually..?
Regards,
sivaHi Siva,
Plz check whether you kept the correct JAR files(drivers) related to siebel in the lib folder of the iWay installation directory.
And also check whether you have given the iWay root directory path during creating configuration in Application explorer
Maybe you are looking for
-
How to find out what computers user logged on? (not at the moment but history)
Domain Controller: Windows 2012 R2 - Unfortunately, I don't manage DC but my own OU (computers and users) I have a user working mid-night shift reporting that he received error message "The group policy client service fail the logon, access denied".
-
Transaction code for sales order totals and purchase order totals
Hi i am using alv grid report to display the sales order and purchase order totals by productline(profit center) Now i have to call standard transactions from first list to display the totals of sales order and purchase order.I have to display these
-
HT201401 ringer won't work, only vibrate
just got this phone, ringer won't work when I get a call only vibrate, what have I done wrong or not done, briz1000
-
Settlement Rule on Internal Orders
We have had a request to default in the same asset number for all fixed asset internal orders. Is this possible?
-
FaceTime rings for short time then says call failed
FaceTime rings for a short time then says call failed ever time. Was working fine 2 nights ago. Reset all settings and no joy