Idoc to JDBC scenario steps required

Hi friends,
Can anybody help me to follow the steps for sending the data from SAP system to XI and from XI to JDBC server.
-Balu

search on SDN before posting the question as this has been asked many times.
Introduction to IDoc-XI-File scenario and complete walk through for starters. --> For Idoc sender: IDOC -file
FILE to JDBC Adapter using SAP XI 3.0 --> for jdbc receiver: file -JDBC
IDOC configuration steps:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
chirag

Similar Messages

IDOC-XI-JDBC scenario, jdbc sent too slow

i have a IDOC-XI-JDBC scenario,
the problem is that near 5 Lac IDOC is sent to XI, each IDOC is processes by an instance of the scenario, and the sent to the Database is too clow...means 4000 records per hour,
can i configure the JDBC receiver adapter in a way, so that it becomes faster/more concurrent,

Hey,
First raise the issue to the DBA he might help resolve the ISSUE more efficently.
Secondly check in the JDBC adapter -> Adavance mode -> Disconnect from the data base after processing each message shouldn't be set.
Even check with Database Transaction Isolation Level -> default is value of the connected database.
<b>The isolation level determines how transactions running in parallel can influence each other</b>
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Why not the other way around > Collect multiple idocs in a file restrict maxium number of idocs to required value then send the file ?
Stefan Grube Example:
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
if it is with bpm then collect multiple idoc with occurance change and send them.
<b>Cheers,
*RAJ*
**REWARD POINTS IF FOUND USEFULL <b>

Problem in Idoc to JDBC scenario(uses BPM)

Hi
I have a IDoc to JDBC scenario which also uses BPM.
The JDBC adapter has to execute a Stored procedure on Sybase database.
I work on XI3.0 SP14.
When I am sending IDoc to XI it is failing in CALL adapter step.
The error message is "Unable to convert sender service TruckLiftAccountUpdate to an ALE logical system".
However this scenario is working in Production with same settings.But it is not working in Quality and it is giving the above error.
Can any one help me in this.
Thanks in advance.
KP

Thanks for your quick reply..
All the settings are in place.
Here the Idoc is coming to BPM and BPM cant able to execute the stored procedure.and we are getting the error from BPM to target system.
Here error is unable to convert the sender service(from BPM service) to ALE
logical system.
same settings are there in Production but it is not working in QA.
Thanks in adavnce,
KP

IDoc to JDBC scenario - UDF

Hi,
Hope you all are doing well. I have an IDoc to JDBC scenario. The IDoc structure is as follows:
   <IDOC BEGIN="1">
      <Structure 1>
         <DEFINITION>xxxx</DEFINITION>
         <CREATE_DATE>20070706</CREATE_DATE>
      </Structure 1 SEGMENT="1">
      <Structure 2>
         <ELEMENT>xxx1</ELEMENT>
         <CREATE_DATE>20070719</CREATE_DATE>
      </Structure 2>
      <Structure 2>
         <ELEMENT>xxx2</ELEMENT>
         <CREATE_DATE>20070719</CREATE_DATE>
      </Structure 2>
      <Structure 3>
         <ELEMENT>xxx1</ELEMENT>
         <PROJECT>yyyy1</DEFINITION>
      </Structure 3>
      <Structure 3>
         <ELEMENT>xxx1</ELEMENT>
         <PROJECT>yyyy2</PROJECT>
      </Structure 3>
      <Structure 3>
         <ELEMENT>xxx2</ELEMENT>
         <PROJECT>yyyy3</DEFINITION>
      </Structure 3>
      <Structure 3>
         <ELEMENT>xxx2</ELEMENT>
         <PROJECT>yyyy4</PROJECT>
      </Structure 3>
   </IDOC>
Structures 1, 2 and 3 are at the same level/hierarchy in the IDoc. Structure 3 contains the project name of records in structure 2. The requirement is that if the records in structure 2 have the create date as the current date then the corresponding project in structure 3 has to be passed on to the database by creating a statement. To do this, we need to check the date of the record in structure 2 and if the date is equal to the current date then we have to use the element in structure 2 to select the corresponding rows in structure 3 to be passed on to the database. The INSERT statements have to be created for each of the rows of Structure 3 to be passed on to the database.
How do I achieve this?
I tried using node and text standard functions functions but was unable to achive the objective. Can I use UDF to read the IDoc structures and determine the statements?
regards
Debansu

Hi Debansu,
Use this Queue type UDF
public void UDF(String[] curDate, String[] Element_Str2, String[] date, String[] Element_Str3, String[] project, ResultList result, Container container) throws StreamTransformationException{
for(int i=0; i<date.length; i++)
    if (curDate[0].equals(date<i>))
     for(int j=0; j<project.length; j++)
       if (Element_Str2<i>.equals(Element_Str2[j]))
          result.addValue(project[j]);
Here first parameter is current date function, second parameter is 2nd structure element field, third parameter is date field from 2nd structure, fourth parameter is 3rd structure element field and fifth parameter is project field from 3rd structure.
Regards,
VR

IDOC to JDBC scenario: Does INSERT command expect a result value?

Hello,
we have an IDoc-to-JDBC-scenario configured on our XI 3.0, which uses the INSERT command to put a dataset coming from R/3 into a SQL database. This works fine.
Now a trigger has been activated on the database, which sets a flag to each dataset after inserting.
Because of this a system error occurs in the Adapter Engine and I found in the AuditLog (logSQLStatement=true), that the INSERT command is processed correcty, but in the next step an error is shown up: 'SQLServerException. A result set was generated for update.'
Could it be, that the trigger returns a result value, which can't be handled on the XI ?
If yes, how can I solve this issue? I have read something about the different methods execute(), executeUpdate() and executeQuery(), but I don't know how and where this has to be configured...
Thanks in advance,
Juergen

Hi Upendra,
I got some more information from the database adminstrator:
He used the following command 'exec xp_cmdshell @ExportCmd , no_output'
whereas @ExportCmd contains the command.
With the no_output option, the xp_cmdshell does not return a recordset.
I hope this will be helpful to you.
Grtz,
Juergen

Idoc to jdbc scenario of sap xi

Hi All,
i want step by step procedure for developing idoc 2 jdbc scenario. Anybody have this scenario, please send me that.
Thanks & Regards,
Nagarjuna.

Hi
Have a look at these threads
/people/laxman.molugu/blog/2006/08/13/integration-with-databases-made-easy-150-part-1
Re: Idoc triggering from a transaction
Message Mapping - JDBC to IDoc
Re: JDBC - System/Application Acknowledgement
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
Process Integration (PI) & SOA Middleware
**Reward points if helpfull**

Very strange error : IDOC to jdbc scenario

Hi
I am getting a very strange error when I see the log for the idoc to jdbc scenario that I am building.
The mapping test shows the header record and line item record properly in the mapping result.
insert, access nodes, fields with access nodes are all formed correctly.
However the communication channel log shows below error.
Could not execute statement for table/stored proc. "tblTestItem" (structure "Item") due to com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'tblTestItem' (structure 'Item'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
The message status was set to WAIT.
The query that I see in the log is :INSERT INTO tblTestItem () VALUES ()
However mapping tool shows that all nodes are correctly formed.
Please assist.

Hi
I am still getting this issue even after the below steps so kind of stuck - actually very much stuck.
1. Restart of the dev environment
2. Tried with a new extension of the idoc
In the communication channel log for the JDBC receiver channel I still see
INSERT INTO tblItem () VALUES ()
The payload that I see in the message content tab is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_XXX_XXXX xmlns:ns0="http://capita.com/pi/XXXX">
- <Statement>
- <dbTableName action="INSERT">
<table>tblItem</table>
</dbTableName>
- <access>
<InvoiceNo>0000000009293467</InvoiceNo>
</access>
</Statement>
</ns0:MT_XXX_XXXX>
How do I debug the jdbc adapter to see how it converts the above xml output from the mapping step (note that this output is from an actual run and not test tool) to a sql query.
Very strange that the column names are present in the target payload but it is not reflecting in the query.
I have other tables being populated with the same jdbc receiver communication channel which makes this more and more confusing.
PLEASE ADVICE.

Please help in configuring IDoc to JDBC scenario

Hi all,
i am very much new to SAP XI 3.0. We are trying to execute an IDoc-XI-JDBC scenario. The data in the segments of the IDoc should be populated into a table of the database.I am unable to do it as I am totally new to XI.Can any one please help me on the steps invovled in configuring the above scenario or please provide any document describing a similar configuration.
Thanks in advance
Pavan

Hi Pavan,
check these links (some on Idocs & some on JDBC)
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Regards
Vishnu

Can i get IDOC to File scenario Step-by-Step Procedure?

can i get IDOC to File scenario Step-by-Step Procedure?
please provide me the step-by-step and hole procedure..please.
Tks

Hi,
Check this blog-
IDOC - File scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
configuring IDOCS
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
IDOC scenarios
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Idoc related setting
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Save Idoc to file
https://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
see the below links
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
Also
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
regards
Aashish Sinha
PS : reward points if helpful

Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario

Dear all,
i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
Is there a way to pass these acknowledgements to the IDoc status record?
In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
Many thanks and best regards
Florian

Is there a way to pass these acknowledgements to the IDoc status record?
Without BPM, No.
So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
What if I deactivate the acknowledgement request in the NOALE programm?
Then u won't have any ALEAUD message at sender R3.
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
No
Regards,
Prateek

IDOC to JDBC scenario in case of Cost Element Group IDOC.

This is an IDOC to JDBC scenario.
The Cost Element Group IDOC is having different segments. The main segment E1COGH (1...unbound) is consisting of different subsegment like E1OGS (0...unbound) & E1COGV (0...unbound). The main segment (E1COGH) along with subsegments E1OGS & E1COGV) is occuring more that 1 times. I have to insert data into the table, which we can do in single rows (no hierarchy is possible in tables). I have used "use one as many" in message mapping. Now if E1OGS or E1COGV is repeating in a single E1COGH segment then we dont get any error. But if I duplicate the main segment then I am getting runtime exception.
Please suggest about how to map in this case.

In my scenario:
     E1COGH
     |
      -> E1COGS
         E1COGV
where     E1CGH -> Main segment
     E1COGS & E1COGV -> sub segment
E1COGH -> 1..unbound
E1COGS -> 1..unbound
E1COGV -> 1..unbound
At the target side I have created two Statement Structure (ie.Statement & Statement_1) . One for E1COGS (ie. Statement) & the other for E1COGV (ie. Statement_1).
Case 1 -> If E1COGS is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGS is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement & in the absence of E1COGS this Statement structure is SUPPRESSED.
Similarly,
Case 1 -> If E1COGV is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGV is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement_1 & in the absence of E1COGV this Statement_1 structure is SUPPRESSED.
All the elements of the segment E1COGH, E1COGHT & E1COGHR are replicated in all the rows for X (no. of occurance of E1COGS) + Y (no. of occurance of E1COGV).
While testing in Message Mapping, I am able to get the output as for multiple occurence of E1COGS & E1COGV in a single E1COGH.
But if I increse the occurence of E1COGH the it is giving the following error :
Runtime exception during processing target field mapping /ns0:MT_Cost_Element_Group_Response/Statement/DBtablename/access/GROUPNAME. The message is: Exception:[com.sap.aii.mappingtool.tf3.IllegalInstanceException: Too few values in first queue in function useOneAsMany. It must have the same number of contexts as second queue.] in class com.sap.aii.mappingtool.flib3.NodeFunctions method useOneAsMany[com.sap.aii.mappingtool.flib3.CollapseContexts@51197231, , ]
Please suggest how to map the occurence of E1COGH simultaneously with the occurence of E1COGS & E1COGV.

Mapping issue in idoc to JDBC scenario

mapping issue in idoc to JDBC scenario
source structure
E1KNB1M
BUKRS = 1000
E1KNB1M
BUKRS= 9000
E1KNB1M
BUKRS= 2000
THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
TARGET field : ISFRANCHISE
if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
if BUKRS = 9000   THEN ISFRANCHISE= Y
               ELSE
            ISFRANCHISE=N
I've done the mapping as below
BUKRS = 9000--> IF THEN Y ELSE N--
> ISFRANCHISE
BUT everry time the target value is N only
pl suggest
rgds
mojib

mapped like this
BUKRS--->SORT---->
                                             EQUALS --------IF---THEN    Y
9000------------------------>                                               ----------------->ISFRANCHISE
                                                              ELSE   N
context of BUKRS set to parent node
its worked
thanks to all for valuable suggestions
rgds
mojib

Error in IDoc to JDBC scenario

Hi friends,
I am configuring an IDoc to JDBC scenario in XI.When I am testing the scenario in Test Configuration then it is getting processed successfully but when I am tseting the entire configuration then in sxmb_moni the following error is showing:
"Error occurred during back-routing Error in communication channel". Please help as I am unable to understand the error.
regards
Debansu

Hi Debansu,
Please go through the link it may help to solve your problem.
JDBC Adapter / Acknowledgements
Error in back routing Error in communication channel
Regards,
Sridhar Goli
Edited by: sridhar goli on Aug 11, 2008 11:35 AM

IDOC to JDBC Scenario error

Hi All,
I am doing a IDOC to JDBC Scenario.I am done with IR and ID.
The Table in the DB is TABLE1 with Field1 and Field2.
Now when I run thescenario it throws an error ,
2009-03-19 12:41:06 Success INSERT INTO TABLE1 (Field1, Field2) VALUES (KM247850, FINJTIA)
2009-03-19 12:41:06 Error Unable to execute statement for table or stored procedure. 'TABLE1' (Structure 'Statement') due to java.sql.SQLException: [EUDNT038]The name "KM247850" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
But it has successfully generated the SQL Query which I think is perfect.
But whats the error which follows that?
How do I resolve it?
Thanks,
Venu

Hi,
It could be due to wrong structure of JDBC, compare your target structure with this blog..
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Regards,
Sarvesh

IDOC -to-JDBC Scenario for Purchasing Info Record - Urgent !!!

Hi All,
       I am working on IDOC-to-JDBC Scenario and i have no concepts about IDOCs. I know how to configure an IDOC in XI , but i have no idea how to start for it in SAP.
       Can anybody help me on how to find the INFREC IDOC in SAP, how to configure it , how to insert data into that IDOC and then finally how do we test that if its working or not .
Thanks & Regards,
Ruchi

Hi All,
       I am working on IDOC-to-JDBC Scenario and i have no concepts about IDOCs. I know how to configure an IDOC in XI , but i have no idea how to start for it in SAP.
       Can anybody help me on how to find the INFREC IDOC in SAP, how to configure it , how to insert data into that IDOC and then finally how do we test that if its working or not .
Thanks & Regards,
Ruchi

Idoc to JDBC scenario steps required

Similar Messages

Maybe you are looking for