Idoc To JDBC Szenario EOIO overtaking messages

Hi guys,
I have an idoc to EOIO scenario, where some messages of different idoc types upsmas & chrmas have to be processed in the same order they are created in
the SAP ERP Backend.
To achieve this behaviour I use the the option "rule name" in the partner profile we20 according to this blog.
How to serialize IDoc XML messages fed into XI
Messages of both idoc types upsmas and chrmas have the correct queue name in the ReliableMessaging section.
The messages are processed via JDBC adapter.
In the message monitoring the qualtiy of service and conversion id (queue name) is correct.
Some time some messages overtake each other so that the sequenz number in message monitoring is incorrect, older message has a higher number than the newer message.
for upsmas messages there is one more step during processing. These messages are splitted during receiver determination, 2 receiver are defined.
The sender SAP system and the the database.
Why do these messages overtake each other?
Is there some kind of sequenz number in ABAP stack?
could be the multiple receiver the reason for the wrong order of the messages?
Hopefully you could give me some advice, I appreciate your help.
Kind regards
Jochen

Hi guys,
unfortunately this issue is not resolved yet and the error situation occurs again.
According to your comments I think the message split in receiver determination could be the reason for the incorrect order of the messages.
To clarify the situation I will describe the needed business case once more.
During this scenario customer master data have to be tranfered form SAP ERP 6.0 to an MS SQL database.
The main part of this data is transfered using different idoc types e.g. CHRMAS, KNOMAS, UPSMAS
During the processing the order of messages have to be maintained, so I use the quality of service EOIO, which works fine so far.
The UPSMAS is a special idoc in this scenario.
It determines the end of a data package an triggers an stored procedure in the database. There fore it is created last in SAP ERP.
But there is the requirement to get an receipt to the UPSMAS idoc. This receipt is used to update the transfering status int the SAP ERP.
Therefore I added two receivers in the receiver determination for the UPSMAS idoc, one for the database to call the stored procedure and another one back to the sender SAP ERP to update the status. This receipt message is sent via ABAP proxy, in the execute method a funtion module is called to update the transfer status.
As I said above the idocs are received in the correct order in SAP XI. But sometimes the order changes form apab to java stack for UPSMAS messages (the ones with two receivers)
In sap help I found following statement according to idoc serialization
http://help.sap.com/saphelp_nw70/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
>
SAP Help
> The sequence at the Integration Server inbound or outbound channel can only be guaranteed if only IDocs are processed, and not if different protocols (for example, IDocs and proxies) are processed together.
>
how could I meet the business case, but remain the order of the messages?
I appreciate your help
Kind regards
Jochen

Similar Messages

Message mapping issue in idoc to jdbc scenario

We have a scenario of idoc->XI-JDBC
the below given segment may get repeated , as shown below ,
E1EDP19[2]--idoc segment
   QUALF---003
   IDTNR---01000123(Bar Code No)
E1EDP19[3]--idoc segment
   QUALF---003
   IDTNR---20500000000034(EAN No)
Reqd mapping
if QUALF=003
THEN IDTNR----->Bar_code_Number_EAN
Now IDTNR has to be mapped with Bar_code_Number_EAN for the segment which comes last
Pl suggest how to map using graphical mapping for the above scenario.

Hi Raj ,
The current mapping works fine if the parent segment E1EDP01 is only one but if that gets repeated then the last value of IDTNR is getting populated in the target side, very clearly i m giving the source and target structure and the mapping done using the UDF
Source structure
E1EDP01
       E1EDP19[1]--idoc segment
              QUALF---002
              IDTNR---01000123(Bar Code No)
       E1EDP19[2]--idoc segment
              QUALF---003
              IDTNR---01000123(Bar Code No)
       E1EDP19[3]--idoc segment
           QUALF---003
           IDTNR---20500000000030(EAN No)
E1EDP01
     E1EDP19[1]--idoc segment
                QUALF---002
                IDTNR---01000123(Bar Code No)
     E1EDP19[2]--idoc segment
               QUALF---003
               IDTNR---01000123(Bar Code No)
      E1EDP19[3]--idoc segment
             QUALF---003
             IDTNR---20500000000031(EAN No)
E1EDP01
       E1EDP19[1]--idoc segment
               QUALF---002
                IDTNR---01000123(Bar Code No)
      E1EDP19[2]--idoc segment
              QUALF---003
              IDTNR---01000123(Bar Code No)
     E1EDP19[3]--idoc segment
          QUALF---003
          IDTNR---20500000000032(EAN No)
Target mapping
if QUALF=002
THEN IDTNR--->Article_No this is the direct mapping so , no issues
if QUALF=003
THEN IDTNR----->Bar_code_Number_EAN, now this IDTNR should get repeated every time the segment E1EDP01 gets repeated , currently only the last value form all the IDTNR is coming to the target side.
The current mapping works fine if the parent segment E1EDP01 is only one
Target structure
Access1
IDTNR--> Bar_code_Number_EAN( value is 20500000000030)
Access2
IDTNR--> Bar_code_Number_EAN( value is 20500000000031)
Access3
IDTNR--> Bar_code_Number_EAN( value is 20500000000032)
Current mapping
If QUALF = 003
                Then QUALF ---->
                                                 mapBarCodeEAN---->Bar_code_Num_EAN
If QUALF = 003
                Then IDTNR ---->
Context of QUALF is set to E1EDP01
Context of IDTNR is set to E1EDP01
thanks for your personalised help
rgds
mojib
Edited by: mohammad mojib ur rahman on Apr 9, 2010 1:30 PM

Message mapping from 0..1 to 1 (IDoc to JDBC)

Hi,
My Scenario is IDoc to JDBC. I have a field in IDoc which is optional, this optional filed is mapped to a mandatory field in JDBC.
If the optional filed in IDoc doesn't exist, then mapping between Optional field and mandatory field is not happening and hence the mandatory field is becoming null which is throwing error in JDBC.
Can any one guide me in how to map these fields and even if optional field in IDoc doesn't exits, a constant 'false' should be filled in mandatory field.

Hi
Use mapwithdefault standard function. so even if your optional field does not occur then a blank value will still be pased to your target field.
Also you can check if your optional field exitst, if it does not then pass a blank constant else pass your value.
You can use any of the above 2
FIELDNAME->MAPWITHDEFAULT->TARGET
Hope this solves your issue
THanks
Saiyog

Idoc to jdbc scenario problum in queue ?

hi experts
I am facing a problem in IDOC to JDBC Scenario (PI 7,1) . When i trigger the idoc first time it is inserting in to the data base . when i trigger second and third time struck in the queue .By default the quality of service it is taking EOIO,
My question is :
1. How to clear the Queue ? and is there is any method it automatically release the queue ?
2. How to change the QOS EOIO to EO .(i don't find any option at jdbc adapter level to give QOS ) ?
Thank You
G.Praveen Kumar

Hi,
>>1. How to clear the Queue ? and is there is any method it automatically release the queue ?
To Re-process Automatically
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
>>2. How to change the QOS EOIO to EO .(i don't find any option at jdbc adapter level to give QOS ) ?
For any Adapter, Receiver side QOS option wont be there. Sender side only will be available.
As soon as you trigger the Idoc from ECC, this will be sent to receiver in the Idoc generation order only
REgards
Seshagiri

Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario

Dear all,
i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
Is there a way to pass these acknowledgements to the IDoc status record?
In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
Many thanks and best regards
Florian

Is there a way to pass these acknowledgements to the IDoc status record?
Without BPM, No.
So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
What if I deactivate the acknowledgement request in the NOALE programm?
Then u won't have any ALEAUD message at sender R3.
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
No
Regards,
Prateek

IDOC to JDBC scenario in case of Cost Element Group IDOC.

This is an IDOC to JDBC scenario.
The Cost Element Group IDOC is having different segments. The main segment E1COGH (1...unbound) is consisting of different subsegment like E1OGS (0...unbound) & E1COGV (0...unbound). The main segment (E1COGH) along with subsegments E1OGS & E1COGV) is occuring more that 1 times. I have to insert data into the table, which we can do in single rows (no hierarchy is possible in tables). I have used "use one as many" in message mapping. Now if E1OGS or E1COGV is repeating in a single E1COGH segment then we dont get any error. But if I duplicate the main segment then I am getting runtime exception.
Please suggest about how to map in this case.

In my scenario:
     E1COGH
     |
      -> E1COGS
         E1COGV
where     E1CGH -> Main segment
     E1COGS & E1COGV -> sub segment
E1COGH -> 1..unbound
E1COGS -> 1..unbound
E1COGV -> 1..unbound
At the target side I have created two Statement Structure (ie.Statement & Statement_1) . One for E1COGS (ie. Statement) & the other for E1COGV (ie. Statement_1).
Case 1 -> If E1COGS is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGS is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement & in the absence of E1COGS this Statement structure is SUPPRESSED.
Similarly,
Case 1 -> If E1COGV is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGV is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement_1 & in the absence of E1COGV this Statement_1 structure is SUPPRESSED.
All the elements of the segment E1COGH, E1COGHT & E1COGHR are replicated in all the rows for X (no. of occurance of E1COGS) + Y (no. of occurance of E1COGV).
While testing in Message Mapping, I am able to get the output as for multiple occurence of E1COGS & E1COGV in a single E1COGH.
But if I increse the occurence of E1COGH the it is giving the following error :
Runtime exception during processing target field mapping /ns0:MT_Cost_Element_Group_Response/Statement/DBtablename/access/GROUPNAME. The message is: Exception:[com.sap.aii.mappingtool.tf3.IllegalInstanceException: Too few values in first queue in function useOneAsMany. It must have the same number of contexts as second queue.] in class com.sap.aii.mappingtool.flib3.NodeFunctions method useOneAsMany[com.sap.aii.mappingtool.flib3.CollapseContexts@51197231, , ]
Please suggest how to map the occurence of E1COGH simultaneously with the occurence of E1COGS & E1COGV.

IDOC-XI-JDBC scenario, jdbc sent too slow

i have a IDOC-XI-JDBC scenario,
the problem is that near 5 Lac IDOC is sent to XI, each IDOC is processes by an instance of the scenario, and the sent to the Database is too clow...means 4000 records per hour,
can i configure the JDBC receiver adapter in a way, so that it becomes faster/more concurrent,

Hey,
First raise the issue to the DBA he might help resolve the ISSUE more efficently.
Secondly check in the JDBC adapter -> Adavance mode -> Disconnect from the data base after processing each message shouldn't be set.
Even check with Database Transaction Isolation Level -> default is value of the connected database.
<b>The isolation level determines how transactions running in parallel can influence each other</b>
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Why not the other way around > Collect multiple idocs in a file restrict maxium number of idocs to required value then send the file ?
Stefan Grube Example:
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
if it is with bpm then collect multiple idoc with occurance change and send them.
<b>Cheers,
*RAJ*
**REWARD POINTS IF FOUND USEFULL <b>

Problem in Idoc to JDBC scenario(uses BPM)

Hi
I have a IDoc to JDBC scenario which also uses BPM.
The JDBC adapter has to execute a Stored procedure on Sybase database.
I work on XI3.0 SP14.
When I am sending IDoc to XI it is failing in CALL adapter step.
The error message is "Unable to convert sender service TruckLiftAccountUpdate to an ALE logical system".
However this scenario is working in Production with same settings.But it is not working in Quality and it is giving the above error.
Can any one help me in this.
Thanks in advance.
KP

Thanks for your quick reply..
All the settings are in place.
Here the Idoc is coming to BPM and BPM cant able to execute the stored procedure.and we are getting the error from BPM to target system.
Here error is unable to convert the sender service(from BPM service) to ALE
logical system.
same settings are there in Production but it is not working in QA.
Thanks in adavnce,
KP

IDoc to JDBC scenario strange bahaviour

Hi Experts,
My Scenario is IDoc to JDBC,
I am creating some vendor masters in ECC, CREMAS IDoc sent to PI, mapping everything executed perfectly but data not posted in to data base, it is taking min 20 mnts to post data.
When I monitor communication channel it is initiated and status (Dlvg) but after 20 mnts only it is showing message data posted successfully in Data base.
What I observed was in MONI, IDoc initial status shows still awaiting for acknowledgement, after 20 mnts status changed to Acknowledgement not possible, at this time data posted to ODS.
Why this is happening, it is really strange behaviour.
When I reprocess IDoc using WE19 without delay data posted to data base and IDoc status in moni " ack not possible.
How to solve this issue.
Toa a Thanks advance,
Jam

Hi,
Please see the link, it might be useful to you.[Handle_Acknowledgements|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe]
Regards,
P.Rajesh
Edited by: Rajesh_1113 on Apr 29, 2011 3:24 PM

Idoc to jdbc scenario of sap xi

Hi All,
i want step by step procedure for developing idoc 2 jdbc scenario. Anybody have this scenario, please send me that.
Thanks & Regards,
Nagarjuna.

Hi
Have a look at these threads
/people/laxman.molugu/blog/2006/08/13/integration-with-databases-made-easy-150-part-1
Re: Idoc triggering from a transaction
Message Mapping - JDBC to IDoc
Re: JDBC - System/Application Acknowledgement
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
Process Integration (PI) & SOA Middleware
**Reward points if helpfull**

IDOC to JDBC - mapping test versus actual run

Hi
When I test the message mapping for the idoc-to-jdbc sender scneario, where one sales order idoc has multiple line items in segment E1EDP01, the statement => access structures repeat properly for 2 line items. Here I am giving the idoc xml file (data file) in the payload in the test tab of message mapping)
However in the communication channel log (with sql statement log = true), when I try to process an actual idoc from ECC, in the sql log of the processed message, I can see an insert statement only for the first line item of the sales order.
Please can somebody guide me as to what must be the problem?
Statement occ is 1.
tablename occ is 1.
Access structure occ is 0...unbounded.
The segment E1EDP01 is currently mapped to acess node.
The sales order number is repeated over the 2 line items using below mapping -:
E1EDP01 (with context as root) => "useasmany" => split by value => Item no.
Please advise.

Hello Gary,
Make the statement 0..unbounded or 1..unbounded then make the access 0..1. One statement is needed per action
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7c24a75cf83672e10000000a114a6b/frameset.htm
If the statements are so complex, you can also opt to use SQL_QUERY instead.
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7c24a75cf83672e10000000a114a6b/frameset.htm
Hope this helps,
Mark

IDOC to JDBC Synchronous interface

Hi Experts,
I am using PI 7.1.
Having requirement of IDOC to JDBC synchronous scenario. When data is coming from SAP to DB it is updating data in to u201CXu201D table, when data response from DB is u201CYu201D table.
How can I configure this interface, Please suggest me.
Best Regards,
Pasi...

Hello,
For special problematic of IDOC -> JDBC and sending back acknowledgement have a look to One Logical System Name for serveral BPM Acknowledgements
One Logical System Name for serveral BPM Acknowledgements
Step by Step JDBC Synchornous
JDBC Receiver Adapter -- Synchronous Select Step by Step
Integration with database made easy
Integration with Databases made easy Part 1.
SOAP <=> JDBC Synchronous
SYNCHRONOUS SOAP TO JDBC - END TO END WALKTHROUGH
Serialize IDOC XML
How to serialize IDoc XML messages fed into XI
Regards,
Phani

Very strange error : IDOC to jdbc scenario

Hi
I am getting a very strange error when I see the log for the idoc to jdbc scenario that I am building.
The mapping test shows the header record and line item record properly in the mapping result.
insert, access nodes, fields with access nodes are all formed correctly.
However the communication channel log shows below error.
Could not execute statement for table/stored proc. "tblTestItem" (structure "Item") due to com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'tblTestItem' (structure 'Item'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
The message status was set to WAIT.
The query that I see in the log is :INSERT INTO tblTestItem () VALUES ()
However mapping tool shows that all nodes are correctly formed.
Please assist.

Hi
I am still getting this issue even after the below steps so kind of stuck - actually very much stuck.
1. Restart of the dev environment
2. Tried with a new extension of the idoc
In the communication channel log for the JDBC receiver channel I still see
INSERT INTO tblItem () VALUES ()
The payload that I see in the message content tab is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_XXX_XXXX xmlns:ns0="http://capita.com/pi/XXXX">
- <Statement>
- <dbTableName action="INSERT">
<table>tblItem</table>
</dbTableName>
- <access>
<InvoiceNo>0000000009293467</InvoiceNo>
</access>
</Statement>
</ns0:MT_XXX_XXXX>
How do I debug the jdbc adapter to see how it converts the above xml output from the mapping step (note that this output is from an actual run and not test tool) to a sql query.
Very strange that the column names are present in the target payload but it is not reflecting in the query.
I have other tables being populated with the same jdbc receiver communication channel which makes this more and more confusing.
PLEASE ADVICE.

Need information regarding IDOC to JDBC Scenarios.

Hi,
Kindly help me with the pre-requisites inorder to start with a scenario of IDOC to JDBC and also the scenario of JDBC to IDOC.
Regards,
Sreedhar, Av

Hello Sreedhar,
While we working in JDBC or JMS Adapters we should deploy the Drivers..
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
2) While we working in IDOC Adapters we should do ALE Config of IDOC Settings .
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Here in IDOC to JDBC interface we need not to config sender Adapter..
1) The main usage of a sender adapter is to convert the input format into the XI supported XML format.
Once the conversion is completed the sender agreement appends the header with the sender details.
In case of these adapters we wont require sender agreement and sender communicationchannel for the
following reasons.
Sender agreement is associated with a namespace when we shoot an idoc frm r/3 if already contains its standard sap namespace. so those is need of sender agreement
The sender communication channel use is to identify the sending system and adapter, as the idoc header contains the details there is no need to sender.
These adapters resides on ABAP stack here the integration server takes care of IDOC/HTTP to XML conversion without requirement of adapter.
The business system that is sending the adapter has already been assigned to a techinical system which normally acts as an integration server...
IDOC to xi links
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Hope this explanation is useful to u..
Thanks,
Satya Kumar
Edited by: SATYA KUMAR AKKARABOYANA on Jun 3, 2008 9:57 AM

IDOC to JDBC

HI All,
I am working on IDOC to JDBC scenario. Everything is going correct In Pipeline steps.
But in whenever I am sending IDOC frm R3 to XI message getting stuck in SMQ2 . for this I have checked after the mapping Excuetion if I am sending the 5000 records in IDOC after mapping I am getting only one record in payload.
Moreover I have checked in SXMB_MONI and notice very unsual thing
Inbound tab in MONIidoc is coimg in place of AENGINE and nothing is coimg in outbound tab for place of IENGINE and Q.Status it is coimng red errror symbol.
Please advice...
Regards
Edited by: Manish22 on May 4, 2010 2:25 PM

Hi ,
All the steps are there and fine in SXMB_MONI but the last step call adapter is not coming that means CChaanel adapter is not properly working. For this I checked in Communication Channel Monitoring no message is there?
I have refershed the cache also and I deleted and created New Channel also. it is not working
Please advice..
Regards

Idoc To JDBC Szenario EOIO overtaking messages

Similar Messages

Maybe you are looking for