Idoc to Jdbc using stored procedure

Greetings All,
In my scenario i want to send the idoc from SAP system to SQL database using the stored procedure. I want ack back from JDBC adapter when the record is sucessfully inserted in DB table. There after i can update the status of idoc sent in source SAP system. Can anyone suggest me how to achive this since its seems to like a syncronous scenario. Can we achive this without stored procedure i.e. calling Insert_Update statement
Many thanks,
Sandip

Hi,
Go through this thread
Re: XI IDoc Acknowledgement - Acknowledgement not possible status
Regards
Laxmi Bhushan

Similar Messages

JDBC(using stored procedure) to RFC Scenario

Hi
I am doing JDBC(using stored procedure) to RFC Scenario
While running the scenario i am getting the following error
Database-level error reported by JDBC driver while executing statement 'EXECUTE EMU.EXTRACTRECON'. The JDBC driver returned the following error message: 'com.ibm.db2.jcc.a.SqlException: [ibm][db2][jcc][10100][10910] java.sql.Statement.executeQuery() was called but no result set was returned. Use java.sql.Statement.executeUpdate() for non-queries.'. For details, contact your database server vendor.
Can anybody sortout my problem
Regards
sunilreddy

Hi,
i am doing the scenario file to rfc scenario.
when i run my scenario xi system is picking the data from file system
but rfc is not accepting the data.this is the error i am getting
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
so please any one give me the solution for that

Reg: File to JDBC using Stored procedure

Hi friends,
I have a scnario where i need to execute a storedprocedure on MS-SQL server 2005.
Scnario is sender file to Receiver JDBC.
Source format in is
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_File_Out xmlns:ns0="http://relianceada.com/test/File_XI_JDBC">
- <Row>
<Empno>1234</Empno>
<Trip>34q53445</Trip>
<status1>sdfgsdfg</status1>
<Date>20090628</Date>
</Row>
</ns0:MT_File_Out>
receiver format is
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_JDBC_In xmlns:ns0="http://relianceada.com/test/File_XI_JDBC">
- <STATEMENT>
- <SP_SAP_XI_Test action="EXECUTE">
<EmpNo type="Varchar">1234</EmpNo>
<TripNo type="Varchar">34q53445</TripNo>
<Status type="Varchar">sdfgsdfg</Status>
<Date type="Date">20090628</Date>
</SP_SAP_XI_Test>
</STATEMENT>
</ns0:MT_JDBC_In>
For reference Storedprocedure
alter procedure SP_SAP_XI_Test
@EmpNo Varchar(10),
@TripNo varchar(10),
@Status Varchar(10),
@Date Datetime
as
Begin
if exists(select '*' from SAP_XI_TEST where Empno = @Empno
and Date = @Date)
begin
     Update SAP_XI_TEST
     SET Trip = @TripNo,
     Status1 = @Status
     where Empno = @Empno
     and Date = @Date
end
Else
   begin
      Insert Into SAP_XI_TEST Values (@EmpNo,@TripNo,@Status,@Date)
   end
End
I can see sucessful message in sxmb_moni then when i check the CC monitoring i am getting this error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_SAP_XI_Test' (structure 'STATEMENT'): java.lang.IllegalArgumentException
Guide me what i missed.
Regards
Vijay

Hi,
Date field is causing the problem, check the format in DB and if necessary adjust it in Message mapping of XI. Also change the type of the field Date in Data type to xsd:string instead of xsd:date
Regards
suraj

How to use Stored Procedure Call in Sender JDBC adapter

Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
Xier

Hi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !!

How to use Stored Procedures in JDBC sender side and receiver side

Hello,
Can anyone explain how to use stored procedures in configuring the scenario using JDBC adapter at bothe sides sender nad receiver..
Thanks,
Soorya

Hi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag

XI/PI: jdbc receiver using stored procedure with arrays

The company needs an interface to search for header data and detail to a legacy system.
This interface from ERP to legacy system is synchronous and uses stored procedure.
The definition of the stored procedure is as follows:
PROCEDURE
Generar_Detalle_Vtas_Pagadas
    (p_cvendedor                 IN bdc_vendedores.cvendedor%TYPE,
    p_fdesde                   IN DATE,
    p_fhasta                     IN DATE,
    v_encabezado_ct           OUT encabezado_ct,
    v_detalle_vtas_pagadas_ct OUT detalle_vtas_pagadas_ct,
    err_num                 OUT NUMBER
Data types used in stored procedure:
TYPE encabezado_ct AS OBJECT
( CREGION         NUMBER(22),
XREGION         VARCHAR2(50),
CMERCADO        NUMBER(22),
XMERCADO        VARCHAR2(50),
CTVENDEDOR      VARCHAR2(5),
XCTVENDEDOR     VARCHAR2(50),
XDENOMINACION   VARCHAR2(15))
TYPE detalle_vtas_pagadas_ct AS OBJECT
(     CITEM           VARCHAR2(10),
      XIDENTIFICADOR VARCHAR2(15),
      XCONTRATO       VARCHAR2(15),
      XVALOR          VARCHAR2(30),
      CCUENTA         VARCHAR2(15),
      FACTIVACION     DATE,
      XDOMINIO        VARCHAR2(30),
      CCED            VARCHAR2(20),
      XCLIENTE        VARCHAR2(161),
      CCPO            VARCHAR2(60) )
As shown, this has three input parameters varchar and date respectively and has three output parameters, two of which are defined with a data
type such as table and the other number.
The problem is to define the signature of the stored procedure in XI when defining the data type request, the message type and mapping system
legacy because the data type is not supported (tables: detalle_vtas_pagadas_ct,encabezado_ct )

FORM 2:
defined as an array, but the error tells me that we need to define the attribute either input or output
<?xml version="1.0" encoding="UTF-8"?>
     <ns0:MT_VtasPagadas_VYC xmlns:ns0="urn:VentasPagadas:VE_ALTASDEDCALIDAD_SD_VYC">
      <VtasPagadasRequest><Generar_Detalle_Vtas_Pagadas action="EXECUTE">
         <table>vyc.Vyc_Pack_Reportes_Sap.Generar_Detalle_Vtas_Pagadas</table>
         <p_cvendedor type="VARCHAR"></p_cvendedor>
         <p_fdesde type="DATE"></p_fdesde>
         <p_fhasta type="DATE"></p_fhasta>
         <v_encabezado_ct>
             <CREGION isOutput="1" type="NUMERIC">X</CREGION>
             <XREGION isOutput="1" type="VARCHAR">X</XREGION>
             <CMERCADO isOutput="1" type="NUMERIC">X</CMERCADO>
             <XMERCADO isOutput="1" type="VARCHAR">X</XMERCADO>
             <CTVENDEDOR isOutput="1" type="VARCHAR">X</CTVENDEDOR>
             <XCTVENDEDOR isOutput="1" type="VARCHAR">X</XCTVENDEDOR>
             <XDENOMINACION isOutput="1" type="VARCHAR">X</XDENOMINACION>
        </v_encabezado_ct>
        <v_detalle_vtas_pagadas_ct>
             <CITEM isOutput="1" type="VARCHAR">X</CITEM>
             <XIDENTIFICADOR isOutput="1" type="VARCHAR">X</XIDENTIFICADOR>
             <XCONTRATO isOutput="1" type="VARCHAR">X</XCONTRATO>
             <XVALOR type="VARCHAR">X</XVALOR>
             <CCUENTA isOutput="1" type="VARCHAR">X</CCUENTA>
             <FACTIVACION isOutput="1" type="DATE">X</FACTIVACION>
             <ICTA isOutput="1" type="VARCHAR">X</ICTA>
             <CCED isOutput="1" type="VARCHAR">X</CCED>
             <XCLIENTE isOutput="1" type="VARCHAR">X</XCLIENTE>
             <CCPO isOutput="1" type="VARCHAR">X</CCPO>
        </v_detalle_vtas_pagadas_ct>
        <err_num isOutput="1" type="NUMERIC">X</err_num>
     </Generar_Detalle_Vtas_Pagadas>
</VtasPagadasRequest></ns0:MT_VtasPagadas_VYC>
Edited by: ymonasterio on Mar 31, 2010 4:48 PM

HOW TO USE STORED PROCEDURES IN JASPERREPORTS(URJENT)

Hi,
i'm using jasperreports in struts based project. How to use stored procedures in jasperreports. pls send the solution urjent
Thanks in advance
ramesh

Hi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag

Using Stored Procedures with TopLink / JPA : Success explanation

For those who have to use Stored Procedures in TopLink this is my success history :
To call an Stored Procedure from the persistence, we have to use the direct JDBC connection because my TopLink version ( Essentials 10g ) ? to date ( 10g ) does not have support for Stored Procedures.
Here is my code :
<address>{color:#0000ff} EntityManagerFactory JPAemfactory = null;{color}</address>
<address>{color:#0000ff} JPAemfactory = Persistence.createEntityManagerFactory ("MyPersistenceUnit"); // this is the name of the persistence unit wrote in the persistence.xml file{color}</address>
<address>{color:#0000ff} EntityManagerr MyEntityManager = JPAemfactory.createEntityManager ();{color}</address>
bq. <address>{color:#0000ff}// creation of the stored procedure calling string .... one question mark for every param, output included \\ String sql = "{call SP_GETLISTATARIFAS(?,?,?,?,?)}"; \\ // We get the JDBC connection \\ oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerImpl entityManager = (oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerImpl) MyEntityManager; \\ UnitOfWorkImpl uow = (UnitOfWorkImpl)entityManager.getUnitOfWork(); \\ // we create a request to the unitofwork because if dont the connection will not exist \\ uow.beginEarlyTransaction(); \\ Connection conexion = ((UnitOfWorkImpl)uow).getAccessor().getConnection(); \\ {color}{color:#0000ff} \\ try { \\ // Creation of the call and we will identify the params as they are in the stored procedure definitiondefinidos \\ CallableStatement call = conexion.prepareCall(sql); \\ {color}</address>
bq. <address>{color:#0000ff} \\ // params INPUT with their values \\ call.setString("pIDMCUPO", "125"); \\ call.setString("pCODIGOHOT", "8023"); \\ call.setString("pCODCANAL", "WEB"); \\ call.setString("pCODSUBCANAL", "HOTEL"); \\ {color}</address><address>{color:#0000ff} \\ // params OUTPUT \\ call.registerOutParameter("rRESULTADO", java.sql.Types.VARCHAR); \\ {color}</address><address>{color:#0000ff} \\ // execution \\ call.execute(); \\ {color}</address><address>{color:#0000ff} \\ // getting the response \\ mcontratos_out = call.getString("rRESULTADO"); \\ {color}</address><address>{color:#0000ff} \\ // closing the proc \\ call.close(); \\ {color}</address><address>{color:#0000ff} \\ } catch (SQLException ex) { {color}</address><address>{color:#0000ff} // something you do if there is an error \\ {color}</address><address>{color:#0000ff} \\ } {color}</address>
Hope this helps all the people that have searched a lot like me.......

I have my entity manager setup in a singleton.
I'm finding it's costly to generate the emf, but if I don't close the em (enitity manager) and emf (entity manager factory) my open cursor count climbs until I exceed the max number of open cursors on the database (11g RAC)
I'm committing the connection, and uow, and closing the em at the end of each call.
But until I close the emf, the open cursors aren't released.
TransactionhistoryPkg tranPkg = new TransactionhistoryPkg(conn); //Class created over database package via JPublisher
tranPkg.transactionhistoryInsSp(insertTrans.getCardId()); // executes db package
tranPkg.closeConnection();
conn.commit();
uow.commit();
uow.getAccessor().decrementCallCount();
em.close();
Am I missing something really obvious here??
btw - I found this link helpful in troubleshooting the max cursors issue: https://support.bea.com/application_content/product_portlets/support_patterns/wls/InvestigatingORA-1000MaximumOpenCursorsExceededPattern.html

Synch JDBC Receiver - stored procedure

Hi All ,
Can you please let me know whether we can go for a Synch JDBC receiver which needs to excute a stored procedure at the target DB system ? If Yes , Please let me know the procedure .
Thank you.
Regards,
Midhu

hi midhu,
Yes you can use stored procedure in receiver JDBC,Set action field to execute and for table field map to Stored procedure name.
Please refer
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
Regds,
Srinivas

SQLJ vs JDBC vs stored procedur?People

SQLJ vs JDBC vs stored procedur?
What is used in the enterprise?
What to study?

SQLJ and JDBC are ways to access the database - from the client, from the middle tier, or from inside the database server itself.
JDBC is an API specified by Sun as part of Java, while SQLJ is an ANSI (soon ISO) standard for embedding SQL in Java.
JDBC is more widespread, while SQLJ is a more productive environment.
Stored procedures are pieces of code executed in the database as part of your database session. In Oracle Databases, stored procedures are usually written either in PL/SQL (a propertietary Oracle language) or in Java. If you write your stored procedure in Java you use JDBC or SQLJ to access the database - essentially the same code you would write on the client or in a middle-tier.

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to build a report in webi XIr2 using stored procedure

Post Author: vijay123
CA Forum: WebIntelligence Reporting
hi,
Is anybody can help me out how to creat a report using stored procedure in webiXir2
thanks
vijay

Post Author: amr_foci
CA Forum: WebIntelligence Reporting
this has been posted twice.. i think

Error while refreshing bqy file on workspace using stored procedure

Hi,
I am using stored procedure which returns ref-cursor. The report is running fine locally but on Workspace, while refresh, it gives the following error.
An Interactive Reporting Service error has occurred.-SQL API: [SQLNumResultCols], SQL RETURN: [-1], SQL STATE: [HY010], SQL NATIVE ERROR: [0], SQL MESSAGE: [[Microsoft][ODBC Driver Manager] Function sequence error]
(0)
I have ODBC/ODBC connection set up at BI+ configurator.
Thanks,
Manish

We also met this issue. Some guy told me this is a Hyperion limitation, is it true? I really need this function in Hyperion:(

How to use stored procedure in crystal report for eclipse

Hi;
I am working on crystal report for eclipse 2.0 and trying to use stored procedure in report .It is created from Oracle but it is not showing any dependencies
CREATE OR REPLACE procedure ACT_DB.getCostTransferDetails
        p_In_Contract_ID         varchar2 DEFAULT '*',
        p_In_Status_ID           varchar2 DEFAULT '*',
        p_In_COST_TRAN_DATE      varchar2 DEFAULT '*',
        p_In_DEPT_ID             varchar2 DEFAULT '*',
        p_In_PROJECT_ID          varchar2 DEFAULT '*',
        p_In_EMPLOYEE_ID         varchar2 DEFAULT '*',
        p_Out_CostTransfer_Cusor OUT COST_TRANSFER_PACKAGE.COST_TRANSFER_TYPE
AS
BEGIN
        OPEN p_Out_CostTransfer_Cusor FOR
        SELECT
            header.cost_tran_id,
            header.cost_tran_date,
            header.total_credit_amount,
            header.total_debit_amount,
            header.transfer_status,
            header.updated_by,
            header.added_by,
            header.trf_over_ninety_days,
            header.business_unit_id,
            header.equip_approval,
            header.batch_desc,
            details.opr_unit_id,
            status.status_id,
            details.fund_code_id,
            details.prgm_code_id,
            details.class_id,
            details.activity_id,
            details.product_id,
            details.status_id,
            details.transaction_amount,
            details.jrnl_date,
            details.adjust_prcnt,
            details.adjust_amnt,
            details.details_equip_approval,
            details.detail_desc,
            details.account_id,
            details.project_id,
            details.dept_id,
            details.contract_id,
            details.reason_code_id,
            details.jrnl_id,
            employee.f_name,
            employee.l_name,
            employee.employee_id,
            project.project_id,
            project.project_status,
            --header.transfer_status,
            contracts.contract_desc
          FROM header, details, status, employee, department, project, contracts
         WHERE     (header.cost_tran_id = details.cost_tran_id)
                AND (header.cost_tran_date = details.cost_tran_date)
                AND (header.transfer_status = status.status_id)
                AND (department.dept_id = details.dept_id)
                AND (department.dept_id = employee.dept_id)
                AND (project.project_id = details.project_id)
                AND (contracts.contract_id = details.contract_id)
                AND (details.Contract_ID = p_In_Contract_ID OR p_In_Contract_ID ='*' )
                AND (header.TRANSFER_STATUS = p_In_Status_ID OR p_In_Status_ID ='*' )
                AND (TO_CHAR(details.COST_TRAN_DATE, 'MM/DD/YYYY') = p_In_COST_TRAN_DATE OR p_In_COST_TRAN_DATE ='*' )
                AND (details.DEPT_ID = p_In_DEPT_ID OR p_In_DEPT_ID ='*' )
                AND (details.PROJECT_ID = p_In_PROJECT_ID OR p_In_PROJECT_ID ='*' )
                AND (header.ADDED_BY = p_In_EMPLOYEE_ID OR '*'=p_In_EMPLOYEE_ID )
Can any another way to make procedure
Thanx
Regards ,
Amol

Hi Amol,
Are you able to execute your stored procedure from oracle?.
- If "Yes" then use the Crystal Report XIR2 Designer to create the report.
- Import this report in the Crystal Report For Eclipse Workbench.
- The latest version for Crystal Report For Eclipse is SP1.
Please let me know the results.
Thanks,
Neeraj

Unable to run SSIS Package using Stored Procedure

Hi Guys,
        I have create one simple SSIS Package(Move the first table record to second table).It will execute fine in locally.
But, If i'm going call/execute .dtsx file using stored procedure. I'm getting Error. so please let me know the valuable solution.
My Package Path : D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx
Stored Procedure
================
CREATE PROCEDURE SPEXECUTESSISPACKAGE
@FILEPATH VARCHAR(8000)
,@STATUS VARCHAR(500) = NULL OUTPUT
AS
BEGIN
DECLARE @SQLQUERY VARCHAR(8000)
DECLARE @STATUSCODE INT
SET @SQLQUERY = 'DTEXEC /FILE "'+ @FILEPATH +'"'
SELECT @SQLQUERY AS 'SSIS FULL PATH'
EXEC @STATUSCODE = master..xp_cmdshell @SQLQUERY
SELECT @STATUSCODE AS 'STATUSCODE'
IF @STATUSCODE <> 0
BEGIN
SET @STATUS = 'PACAKGE EXECUTE FAILED'
PRINT @STATUS
END
ELSE
BEGIN
SET @STATUS = 'PACAKGE EXECUTE SUCCESS'
PRINT @STATUS
END
END
GO
RUN
============================================================================
EXEC SPEXECUTESSISPACKAGE 'D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx', NULL
Error
=============================================================================
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.4035.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
NULL
Started: 5:06:26 AM
Error: 2014-11-14 05:06:26.07
   Code: 0xC0011007
   Source: {1244CD18-F96A-4DAD-8FC2-35F794015CA1}
   Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2014-11-14 05:06:26.07
   Code: 0xC0011002
   Source: {1244CD18-F96A-4DAD-8FC2-35F794015CA1}
   Description: Failed to open package file "D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot
be opened or loaded correctly
into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
End Error
Could not load package "D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx" because of error 0xC0011002.
Description: Failed to open package file "D:\Temp\SSIS_TESTING\TESTSSIS\TESTSSIS\Package.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened
or loaded correctly int
o the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
Source: {1244CD18-F96A-4DAD-8FC2-35F794015CA1}
Started: 5:06:26 AM
Finished: 5:06:26 AM
Elapsed: 0.047 seconds
NULL
I'm getting Execte SSIS Package Status : 4
===================================
4

Two things to check
1. The account executing the package has access to the path. If package is stored in different server you need to pass the UNC path (ie like \\machinename\...)
2. Make sure the version of SSIS service is the same in both the servers ie where package is created/stored and where its getting executed. A lower version SSIS service will not be able to load and execute higher version package and it will throw you similar
error messages as you posted above.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Idoc to Jdbc using stored procedure

Similar Messages

Maybe you are looking for