IDOC to mutiple systems.

Hi Paulie,
Yes this can be achieved through enhanced receiver determination. If both the conditions that you provide for the mapping of Service node on the target, the message is send to both the systems.
But i think you will need enhanced interface determination as well, for your requirement.
Thanks and Regards,
Sanjeev.

Hi,
If I understood your requirement correctly...then u need to do these:
create multi mapping in graphical mapping.....
transform your source to 2 target formats here...
as you are using multi mapping go for enhanced interface determination...
use extended receiver determination to route to target systems...
Regards,
Chaitanya.

Similar Messages

View the Idocs in Source System

Hello
I have triggered a ino package load to BI. Now the job is just hanging and is not bringing in any data. Please can someone tell me where can i view these idocs in the source system.
Thanks

Hi
IDocs at Source system --BD87 / WE19/WE20/WE30/WE02 are the Tcodes for IDOCs
Till42 Outbound Idocs after 50 Inbound Status Idocs.
You can even see the Idocs at Info Package -- Monitoring -- Environment - Idocs at Source system.
Check your RFC at SM58/SM59 -- If the Queue Stuck -- Execute LUWs Manually.
When the IDOCs are Taking time to process it is always better to Make the yellow request to Red and Delte the Request and Go for Repeat .
Hope it helps

Passing Changed extended fields using ALE-IDOC to receiving system

Hi all,
Please tell me how passing changed extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
For ex. in matmas05 extended for classification and inspection view and then created using 'CREATION'
related bapi.Do i also need to incorporate the changes by change related bapi or ir can be handled by change pointer concept.
Thanks.

Hi Sanu
1) Please tell me how passing changed extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.
=> Looks like you have extended standard IDOC here. so you need to find User Exit or BADI for the Push program to populate the additional fields. Yes, it is possible thru change pointers as well.
1) Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
=> Yes, as suggested in 1 try finding User Exits/BADIs.
Regards
Shital

IDoc Adapter - Logical System - File to IDOC configuration

I have a scenario reading a File ->XI->IDoc in R/3. I'm looking to have the control record parameter for SNDPRN reflect the Environment dealt with. I unchecked the 'Apply Control Record Values from Payload' & 'Take Sender from Payload' boxes but the problem I'm getting is that the system is reading from the business service (IDoc Adapter - Logical System) and feed it in the Partner Profile in the IDOC. This means that I should all the time redefine 3 this Logical System in config before transporting my scenario from DEV/QA/PRD. Any idea how I can avoid this kind of 'hardcode' ?
Thanks

Hi,
Why u r using three different LS can't u use only one LS and send all the IDOCs to same LS. That will ease ur task.
Do let me know why u r going for three different LS.
In the file r u getting any data which will help u to identify that this file is for which LS. IF that is the scenario then u can use the value mapping and based on the value which is coming in file u can map it to the IDOc filed which u have mentioned and in the configuration it will take the respective configuration.
Thnx
Chirag

SAP system IDOC - XI - SAP system IDOC

Hi,
I have created several scenarios for sending IDOCs between different SAP systems, but I have a problem with just one SAP system that is a copy of our production system when is acting as a source.
When sending the IDOC from source system, I can see the IDOC in SM58, with the following error message;
"client xxx is not available in this system" where the client is actually the client of the receiving system.
I have successfully sent IDOCs from other SAP systems to the same target SAP system so there is nothing wrong with the target system.
Anyone experienced the same? Any ideas?
best regards
Torstein

Hi,
I am facing the same issue too. My target system is also release 700 and I have done all my SALE config, we21 settings. But still the error repeats as " Client XXX is not available in the system". How did you fix this issue?
-Teresa

IDOC from external system

Hi,
I have scenarion in that we will receive IDOC from external system (SAP system) in XI i.e. IDOC- XI -IDOC scenrio. from my Understanding ,to configure the scenario I have to do ALE from sender side and IDOC receiver channel in receiving side.
External system (SAP) -(ALE)-> XI -(IDOC rcv)--> Our System (SAP)
Please can anyone provide me steps to do ALE from external system.
Edited by: tapan singh on Feb 28, 2011 11:51 AM
Edited by: tapan singh on Feb 28, 2011 11:52 AM

Hi,
We can have alternate ways to send IDocs from external system to SAP system. One way is in below link
http://help.sap.com/saphelp_46b/helpdata/en/52/16abf6543311d1891c0000e8322f96/content.htm.
http://help.sap.com/saphelp_40b/helpdata/ru/52/16abcf543311d1891c0000e8322f96/content.htm
I can think of few more, like In external system after generating Idoc, save it as a tex and send it to SAP system using Http post or using web service.
Look out to below discussion.
Send IDoc from External System to SAP system
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 28, 2011 1:16 PM

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
<b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Send IDoc from External System to SAP system

Hi Folks,
I have a requirement to send IDocs from an external system to the SAp system. Basically the external system is a subsystem which is able to send & receive idocs. The external system is currently able to send idocs to SAP system through the ALE layer but now we have to replace it by PI. Now the external system has to send teh IDocs to the SAP ECC system through the SAP PI 7.0.
Kindly let me knowq how I can achieve it.
Regards,
Santosh

Hi Satish,
You can achieve this requirement
1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel to send IDoc.
or
2)Use proxy program ,implement the same ALE logic in PI.
or
3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
Regards,
raj

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

Send idoc to other system via SOAP

Hi,
I intend to implement an interface with other system non SAP, to send idocs via SOAP.
I've read some documentation on sdn but i'm very confused about Was / XI / BSP and some others terms.
Please, can someone help me, driving me to the right way and where to start ?
I don't know either if this the best solution to send many idocs... I'm talking about 10000 idocs each time.
In advance, thanks.

Vitor,
I suppose u want to distribute data of Idocs to a system which accepts SOAP request. For the same u can use XI with necessary distribution model on R/3 side to post the IDoc to XI and XI SOAP receiver adapter making a call to necessary SOAP server to post the data.
Regards
Rajeev

Study material - IDOC and ALE systems ( MM integration ).

Dear All,
Can anyone provide me study material on MM integration with IDOC and ALE systems .
Rohan .

Please check these answered links:
ALE , EDI and IDOC with MM??
What is necessary for MM in IDOC and ALE??
idoc configuration in IDES??
Edited by: Afshad Irani on Jul 6, 2010 9:39 AM

Identifing idoc in r3 system

Hi
Am facing a little bit problem in file to idoc scenario. PI is not generating the idoc number and I need to identify the idoc in r3 system. How can I identify the corresponding idoc in r/3 system ?

hi,
Am facing a little bit problem in file to idoc scenario. PI is not generating the idoc number and I need to identify the idoc in r3 system. How can I identify the corresponding idoc in r/3 system ?
can i know that what is the status in pi Moni sxmb_moni.
if status is (black) Success IN PI MONI .
on r3 system:
you need to check status by using t.c WE02/WE05.
THANKS,

Error message : Info Idoc missing ;database system

I am trying to load the data from database system oracle ,the data was successfully loaded into psa , but cant able to load the data into ods from psa .
Data in psa is all green without any errors , as info idocs are missing its not letting to load data manually from psa to ods ,
I try to reload but coming up with same error
Next day problem was fixed automatically, I want to know what is the exact reason for this problem and how can next day it fixed automatically

Error message : Info Idoc missing ;database system
I need the solution urgently, please help

IDOC to mutiple systems.

Similar Messages

Maybe you are looking for