IDoc to webservice and get the response back into another IDoc.

Hi guys
We have a scenario where we need to send an IDoc to webservice and get the response back into another IDoc.
Questions:
1. Is this scenario possible without a BPM? or do we need to use BPM (Sync-Async bridge).
2. Is there a Async to Sync bridge in BPM?
3. How do I use this bridge in my scenario and customize it?
4. If not possible, provide me the related docs using BPM for the same scenario.
Appreciate your quick response
Regards
Naidu

Hi,
this link may help u............,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1134. [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403. [original link is broken] [original link is broken] [original link is broken]
Regards,
Azeez khan.

Similar Messages

I have a huge amount of my memory used by 'other' than photos and music - to my knowledge, there is nothing there apart from a few songs and photos and 5 podcasts. What could it be? How could I get rid of this 'other' stuff and get the memory back?

I have a huge amount of my memory used by 'other' than photos and music - to my knowledge, there is nothing there apart from a few songs and photos and 5 podcasts. What could it be? How could I get rid of this 'other' stuff and get the memory back?

See -> What is "Other" and what can I do about it? by Kappy.
Clinton

I have an old MAC running OS X 10.2.8 and lost internet capabilities, how do I update and get the internet back?

Help please, I have an old iMac running OS X 10.2.8 and lost internet capabilities, how do I update and get the internet back?

Was it connected to the internet before, and if so how?

HT5699 I forgot the answers for security questions, how can I reset them and get the access back to the iTunes store?

Need help to get access to iTunes store. I bought an iTunes card bor buying on iTunes store.
I forgot the answers for security questions, how can I reset them and get the access back to the iTunes store?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

My images are still in the catalog, but the Folder name has disappeared. I need to get the folder back into my structure with the images in place

Help: I have a very well defined folder structure. Folder are located in a Master location and organized by State. Inside of these are my master RAW file folders organized by location. For example: West Virginia > BIRI_RAW_2012, BLFA_RAW_2013, NERI_RAW_2013, etc. After I set up the masterful following a shoot, I go to LR and import the images. At one time I inadvertently imported the NERI_RAW_2013 masterful set as a subset of something else and it was not appearing in my LR Module in the organization I prefer. So I went to my master folders on my drive and moved the NERI file into the West Virginia state folder. When I went back to LR, as expected the NERI folder was grey with a question mark. So I right clicked to find the files and relink, and it did not work. The folder name disappeared. The RAW files are still in the catalog and show up in a missing photos search. I can't reimport because they are already there. I just need to restore my folder structure and get the images back to the right spot.

So I right clicked to find the files and relink, and it did not work. The folder name disappeared.
It didn't disappear, it moved (because you told Lightroom to move it). It moved from the incorrect folder location, to the new folder location. Please look in the new folder, in whatever location it is in, not in the old folder and the old location, and you will find the photos.

I deleted my ibooks author file but the preview is still available on my ipad, can I get the ibook back into ibooks author to continue to edit?

I deleted my ibooks author file but the preview is still available on my ipad, can I get the ibook back into ibooks author to continue to edit? I have not published anything, just previewed on my ipad but the file seems to be deleted from my imac which is what I was using ibooks author on. Any help is welcome!

It's not a 'process' at all.
If it was easy/straightforward, people would be turning store versions into iBA versions left/right and all **** would break loose. It's not and that's a good thing, sorry
Work up from whatever version you have.
Any work you value should be backed up....period. That backup should be used and tested regularly. Consider this a lesson learned, perhaps. Good luck in the future.

My Vista system crashed due to a corrupted windows file. When I reformatted C:/ & reloaded firefox & tbird, my bookmarks were gone. I have an image of the drive , but I don't know how to recover them and get the data back where I can access it.

Vista system crashed due to a corrupted system file. The C drive was reformatted, and windows reloaded, along with the rest of my programs.
Before the drive was reformatted, an image was made of it on a USB drive to save all the data. Now I need to know how to get the Bookmarks back for Firefox, and the Address Book back for Thunderbird.
Thanks

Thanks for the quick response. It worked very well, for both Firefox and Tbird.
One hitch, until I remembered: those are all hidden files, in hidden folders. I had a devil of a time finding the "roaming" folder, until I found out how to unhide everything. In years past, I used DOS for that kind of thing. Explorer is much less user-friendly. Now that I know how to do it, it's simple.
Thanks again for the guidance

When I open a HTML document in Safari all the images change to a ? How do i stop this and get the images back?

When I open a HTML document in Safari rather then getting an image, I get a ? in a box. Why is this and how can I change it to get the images back?

monkeyde,
You are getting entagled in the two confusing meanings of the term pixels, namely as a unit identical to points and equalling 1/72 inch, and the basic component of raster images (and effects).
You can read on in this very recent thread:
Is there a way to get Illustrator to know how many pixels are in an inch?

I accidentally paid for 2 photoshop products and now i have two same products i need one of them to be canceled and get the payment back for one of them

I accidentally ordered two same products and need one of them to be canceled and i need to get the payment back. Thanks

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

In ActionScript 2.0 , How can I send HTTP request and get the response in JSON format.

I am using ActionScript 2.0 for my app development. I have checked XML and LoadVars class. These classes by default send/receive data either in XML or name/value pair format. I want to send data in JSON format and receive the response in JSON format. How can I achieve this behavior using AS2.0. I have noticed that AS3.0 has the capabilities to do so. My client platform doesn't support AS3.0. Can anybody suggest a way to achieve this?
Thanks in Advance.

Atlast I am able to find the solution for this problem. In the end solutioin is very simple.
Following steps will help in sending request in JSON format.
1. extend LoadVars class
2. override toString method. (It should return JSON format )
3. Use subclass to send the request.

I synced my iphone 4 with my computed and the erase pictures after sync box was checked and i did not realize it, is there a way to get the photos back into camera roll?

i got a new computer and synced my iphone with it for the first time, i didnt realize the box for erase photos after synce was checked and my photos got erased off my iphone. i got the photos onto my iphone again by going into itunes clicked on the button to go into sync settings for the iphone on the top bar from there i clicked photos and picked the folder with the photos i just synced. i was hoping there was a way to move my photos back into caemra roll. right now i have 4 albums. camera roll, photo library, an album i titled, the album of photos synced with onto my phone that had the pictures that got deleted. the photo library and the photos synced albulm have the same thing in them

Hello there,I hope you will be abale to recover your photos using these applications from the following site
http://www.wondershare.com/disk-utility/recover-deleted-photos-from-iphone.html

My number pad on my aluminum keyboard has stopped responding. How can I get the response back?

Once I press a number key on the pad, the rest of the keyboard also fails to respond, especially when I'm in Chrome on the internet. I'm wondering if it has to do with the browser, too, since once I force quit and go to Safari, the cursor works--but not the keypad, unfortunately.Now, even the numbers on the keyboard don't work. Any help out there?
Thanks.
Joanne

Found the answer in Apple Support: the Mouse key was turned on in Universal access. Once I turned it off, I got the use of the keyboard back.
Oops; nope, that didn't work as I expected, either. The keypad works in some spaces but not in all; for example, when I try to enter numbers to change information in my profile, numbers won't type. But they do in other spaces.
Message was edited by: Joanne Walen

Using SUBMIT and getting the results back

Hi,
I need to call a BAPI on-line (not in the background) using a different User ID as the one that's logged in. I read from the threads the use of SUBMIT ...VIA JOB.
CALL FUNTION 'OPEN JOB'...
SUBMIT zsubmitted_program
       VIA JOB     l_jobname
           NUMBER l_jobcount
           USER    i_user       ====> changed User ID
       TO SAP-SPOOL WITHOUT SPOOL DYNPRO
           SPOOL PARAMETERS ls_params
              AND RETURN.
CALL FUNTION 'JOB_CLOSE'...
Questions:
1. How would I know that the job is finished?
2. How do I retrieve the messages returned by the BAPI so I can present it on the screen?
Many thanks,
Huntr

Hi,
I will be wrapping BAPI_MATERIAL_SAVEDATA into a Z program to run it and use the method mentioned above. I need to know by that method when the batch job is done and how to retrieve the results.
Is there a function module to retrieve the job status or log?
Also I think if i write the bapi results in the spool, I should be able to retrieve the spool. What is the function module to do so?
Regards,
Huntr

How do I manage to get the questions back into the raw in the header of the answering view?

Some how the text in the header of the view of answers is gone.. I deleted "answers" we hade made when testing the form, and suddenly the text in the header was gone too.
Is there any chance to get it back? To import it somehow from the form back in again?

Hi;
See this FAQ about viewing the "History" and copying and pasting those column headers from a point in History where they existted: http://forums.adobe.com/docs/DOC-4071
Thanks,
Josh

Userinfo.asp and getting the info back

Hi All,
I'm probably being really stupid here but I need some help.
We have modified userinfo.asp to pick up settings from our SSO LDAP source. As far as I can tell this seem to have worked in that there are no errors. Running request server.variables (ALL_HTTP) I can see that it has picked up the user email addresses.
Now the problem is trying to pull this setting into a gadget. We are still running 4.5WS SP2 so all help is from the gadget book for this version.
I've tried following the examples and made a simple gadget which is
<%Dim objSettings, dictUserInfoSet objSettings = Server.CreateObject("GSServices.Settings")Set dictUserInfo = objSettings.GetUserInfoSettingsDim cUserMailcUserMail = dictUSerInfo("mail")%>Your email address is: <%=cUserMail%>
the call for 'mail' is set in userinfo.asp
vRequestedAttributes(0) = "cn" vRequestedAttributes(1) = "givenname" vRequestedAttributes(2) = "sn" vRequestedAttributes(3) = "mail"
Thing is that this displays nothing apart from the test. I've made sure these variables are added to the user information in the gadget wizard but still no luck. Could somebody please point out the obvious error.
Thanks Adam
If you are interested the full userinfo.asp code is
Sub PassUserInfo(ptSession, objSSOInfo) Dim lAuthSourceID Dim pUserInfo Dim strUserNameForBind Dim strUserPasswordForBind Dim vRequestedAttributes(4) Dim strObjectForQuery Dim objLDAPQueryTool
Err.Clear On Error Resume Next
Const strQueryFilter = "(objectclass=*)" Const strDelimiter = ";" If Instr(1, ptSession.CurrentAuthUniqueName, "o=Wiley") Then lAuthSourceID = Application("JWAUTHSOURCE")
Set pUserInfo = ptSession.UserInfo
strUserNameForBind = ptSession.CurrentAuthUniqueName strUserPasswordForBind = objSSOInfo.BasicAuthPassword
vRequestedAttributes(0) = "cn" vRequestedAttributes(1) = "givenname" vRequestedAttributes(2) = "sn" vRequestedAttributes(3) = "mail"
strObjectForQuery = ptSession.CurrentAuthUniqueName If (Application("bLDAPQueryToolProviderInitialized") = False) Then Application.Lock() If (Application("bLDAPQueryToolProviderInitialized") = False) Then Set Application("objLDAPQueryToolProvider") = ptSession.AuthSources.Open(lAuthSourceID).AuthSourceProvider Application("bLDAPQueryToolProviderInitialized") = True End If Application.UnLock() End If
Set objLDAPQueryTool = Application("objLDAPQueryToolProvider").Interfaces("IPTLDAPQueryTool") Call objLDAPQueryTool.Search(strObjectForQuery, strQueryFilter, vRequestedAttributes, strUserNameForBind, strUserPasswordForBind, pUserInfo, strDelimiter)
If (err.Number <> 0) Then Response.End Response.Write("<BR><B>There was an error while connecting to the LDAP repository</B><BR>") Response.Write("Please contact your system administrator") End If End IfEnd Sub

The problem you're experiencing with objSSOInfo.BasicAuthPassword in the userinfo.asp page could be due to checking "remember my password" on the login screen. When that happens, the users password is encrypted and written to the Plumtree cookie. This frustrated us for a little while, because autologin still applies all our user info settings, but was not picking up password. It was blank, as you stated.
This is what we did to fix the problem:
In the newutility.asp page under PortalPages\Common we pick up the password used for autologin, and add it to a session variable. This page is called before userinfo.asp in the autologin process. Here's a code example:(from the AutoConnect subprocedure in newutility.asp)
strDP = ptCryptographer.Decrypt(Request.Cookies("PTLogin")("Password")) Session("tmpPassword") = strDP
Then, in the userinfo.asp page we have conditional logic to see if the session variable is blank, if it is not = "" then we know to pick up password from the session variable. If it is = "" then we pick up the password from objSSOInfo.BasicAuthPassword. Here's more code example (from userinfo.asp):
--------Dim sPasswordDim sPasswordEncryptedDim objCryptographerSet objCryptographer = Server.CreateObject("PTGRemote.PTRCryptographer")objCryptographer.Initialize("blahblah")if Session("tmpPassword") = "" then sPassword = objSSOInfo.BasicAuthPasswordelse sPassword = Session("tmpPassword")end ifsPasswordEncrypted = objCryptographer.Encrypt(sPassword)
Call PopulateUserInfo("ECPassword", sPasswordEncrypted, pUserInfo)Call PopulateUserInfo("UEPassword", sPassword, pUserInfo)--------
Sub PopulateUserInfo(inName, inValue, pUserInfo) Call pUserInfo.AddUserInfoSetting(inName, inValue)End Sub
This works 100%, just be sure to not clear out the tmpPassword session variable, or you'll lose the password.
More things to note. The E2K portlet suite expects the users password (when using user info settings) to be passed plain text, unencrypted. That's pretty bad (in my opinion), but that's the way it works. We've had a myriad of problems with this portlet suite (version 3.0.2). I'd love to talk with some other customers using user info settings for these portlets to compare notes, and see if you're running into some of the same issues we are.
Jason OdomCox Enterprises

IDoc to webservice and get the response back into another IDoc.

Similar Messages

Maybe you are looking for