Idoc to XI - Error

Hi
I'm trying to get an Idoc WP_PLU02 from the SAP Retail system to XI. The RFC destination, port & partner profile are all setup.
I tried to process the IDoc from WE19, I can see a successful Idoc in WE02 with status 3 (sent to an external system). But I don't see anything on the XI side. There is no message of any sort in sxmb_moni or in the runtime WB.
Now when I look in SM58 in the SAP system I can see an error which says "Transaction IDX1: Port SAPRT2,client210, RFC Destination contains error RFC destination contains error"
Port SAPRT2 is the sender port.
Any inputs on this would be appreciated.
Thanks
Rachana

Hi,
Go to XI system ->and IDX1 transaction.. And check the port number + RFC destination is given correctly. this should point to SAP system ..
Check thsi RFC destination is having all the entires and test connection success
And the port should have the naming convention SAP<System Id>.
Check this SAP Note -940313
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Similar Messages

STPPOD Idoc creation status : Error in ALE Service

Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text:   IDoc: 0000000000211243 Status: Error in ALE service
T100 Text:     Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role          Basic Type     Receiver Port           Application     Output Mode
LS        DELVRY03      A000000018 (XI port)           GRN               Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan Keshwani

Nikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani

IDOCs Packaging ... What if one IDOC is in error in the packet ?

Hi all,
What will happend to the rest of the IDOC in the packet ?
Lets say, i packaged my IDOC in a bunch of 5. The first 3 IDOCs, their payload are ok. However the 4th has a bad payload and it crash in the mapping section ...
Does the first 3 IDOC (and the 5th one) will be sent and the one in error (4th one) will remain (in XI for mapping error) ?
Thank.
michel osborne

Hi chandrakanth.k,
Thank for your response. I have seen these blogs. I am not using the BPM.
I am using the IDXPW + Messages filter (sxmsfilter) to packaged the IDOCs.
I have made some tests ... wird enough ...
test #1:
idoc (1) - error
idoc (2) - valid
idoc (3) - valid
.... etc ...
test #2:
idoc (1) - valid
idoc (2) - error
idoc (3) - valid
test #3:
idoc (1) valid
idoc (2) valid
idoc (3) - valid
idoc (4) - error
In the "test #1", idoc (2) & idoc (3) are processed correctly (idoc sent to the SAP ECC backend system). Idoc (1) is stuck in XI with errror (mapping) which is OK.
In the "test #2", work the same as in test #1, idoc(1) & idoc(3) hs been delivered to the SAP ECC backend system.
However, in the "test #3"all idoc (1, 2, 3,4) are stuck in XI ... idoc(4) in error (which is ok), idoc(1) up to - idoc(3) in sxmb_moni has the racing flag .... but not delivered to the SAP ECC backend system ... they have the status: Message Schedule for outbound side ....
It seem that each time the package end with and idoc in error, the entire batch get stuck in XI .
How can i get sent them (test case #3) !!?!?
Thank in advance !

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Idoc or trfc error

Hi sap bw'iets
can any one describe step-by-step process to sloving IDOC or TRFC ERROR in production support.
thank you.
regards,
kiran

hi kiran,
sometimes idocs stucks in the source system, so it shows yellow in the monitor even if every thing else is showin green. so to correct this, go to environment -> Transact RFC -> In the Source System. If the status is showing "Executing" then leave it, otherwise u can drag it to BW by selecting execute LUW (F6), by selecting the tRFC.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

Transfer(IDocs and TRFC) error when use infopackage to load data from R/3

I create an infopackage to load data from R/3, when start immediately ,there is no data transfered. The return error is :
transfer(IDocs and TRFC): Errors occurred
request IDoc: Application document not posted
Does anybody know how can correct this error?
Thanks great.

Hi Yimeng,
Check in SM58 transaction code in R/3 and see if any LUWs are stuck there. If so you can execute them manually and complete the data load.
regards,
Sumit

JDBC - XI - IDOC scenario, SM58 error

I am trying to set up a scenario with JDBC -> XI-> IDOC. I seem to get the data, but when I look at it in SXMB_MONI, I get the checkered flag, for the overall status, but a red flag for the outbound status. This led me to SM58 where I see this error "No authorization to send IDocs with message type Z...". It shows the caller ID as being XIAFUSER (which is different from the ID I have created on the receiving SAP system) and is in function module IDOC_INBOUND_ASYNCHRONOUS. On XI, I have the RFC (SM59) and Port (IDX1) setup for the receiving SAP system. The receiving system has an ID setup (used in the RFC on XI), has a partner profile, port, logical system, and a RFC to XI setup.
Any ideas on where to track this down? I tried giving XIAFUSER sap_all, and it still fails and this ID does not exist on the receiving system.

HI,
Just to inform you that, if any SM58 error, mainly because of IDX1 entry and RFC destination .
So that;s the reason , i just suggested to check this SAP note.
Now you have given SAP_ALL access to test right ? Even you can check with this SAP note-837595
Also check that SM59 (RFC destination) in XI system uses any User ID ? DO not select CURRENT USER option here.. and check it
Regards,
Moorthy

Goods receipt - IDOC (WMMBXY/WMMBID02) error

I am creating an inbound goods receipt with IDOC WMMBID02 and get the error 'Document date / / is incorrect in item 0000000001'. Error code: F5833.
Error Diagnosis: 'Service financial accounting: document date " / /" is technically incorrect in item "0000000001" of the accounting document.'
Anyone know why I get this error. Appears to be FI related.

Hi,
The error occurs in the following function module:
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
       EXPORTING
            DATE                      = I_BLDAT
       EXCEPTIONS
            PLAUSIBILITY_CHECK_FAILED = 01.
CHECK NOT SY-SUBRC IS INITIAL.
MESSAGE E833 WITH I_BLDAT I_POSNR.
Please check the documentation for the function module for details.
regards
Aveek

B2B Add on (Edi separator) IDOC AAE Receiver Error

Hi
We are getting an error, Transmitting the message to endpoint <local> using connection EDISeparator_http://sap.com/xi/XI/EDISeparator failed, due to: com.sap.engine.interfaces.messaging.api.exception.ConfigException: No sender agreement configured that matches the message's header fields (sender party: "xxxx", sender service: "", interface: "xxxx", receiver party: "", receiver service: "xxxx") when using IDOC_AAE Receiver adapter with ICO, scenarion works fine with standard IDOC adapter on integration engine
We have 7.31 dual stack with B2B addon sp03
We are using control records from mapping (reciver idoc adapter >advanced>control record in IDOC XML> all options selected)

Hi,
Yes, I filled the information on EDI separator channel, however this works fine with standard idco reciever adapter on integration engine, the issue is when I use ICO with Idoc_aae reciever adapter
you mean to say I have to use (.*) filling all sender edispeartor channel information mandatorily
what if I have to use the information to filter the message type from a multiple message type EDI file
Again this works absolutely fine with idco adapter on IE

Flat Idoc to Idoc XML conversion error.

Hi All,
We are using PI 7.1 EHP1, Where in we would like to see the capabilty of User-Module for Conversion of IDoc Messages Between Flat and XML Formats. Gone thru the below blog and maintained the necessary NWA configurations:
How to Use User-Module for Conversion of IDoc Messages Between Flat and XML Formats
While testing phase, The file is not been picked by the Sender File Adapter and the below error is been displayed in RWB:
"MP: exception caught with cause com.sap.conn.idoc.IDocParseException: (7) IDOC_ERROR_PARSE_FAILURE: Invalid character encountered in XML input data source: state=INITIAL, charPosition=0, lineNumber=1, columnNumber=1, invalidChar=U+0045, sourceSnippet=...EDI_DC40 510000000002889077846C 3012 SHPMNT05 ZSHPMNT9 S... ^"
Any Clues?
Thnx

Hi Stefan,
You are right i have maintained the mandatory parameters (SAPRelease, SourceJRA, TargetDestination) within the sender File adapter module key parameters.
Now getting another error within Comm Channel Monitoring:
MP: exception caught with cause java.lang.StringIndexOutOfBoundsException: String index out of range: -1
Any Clues?
Thnx

IDOC created with errors!

Hello All,
I am sure that I am not posting this in the right forum. But I did this because, I get more responses in this compared to others. Sorry if this has caused any trouble.
I had extended a standard idoc with 2 customer segments and procesed the idoc file. An idoc got created witht he following error message.
EDI: Syntax error in IDoc (mandatory segment missing)
Message no. E0072
Diagnosis
The segment E1EDK14 has the attribute 'Mandatory' in the syntax description of the basic type /IRM/CHGBACKS01 (customer enhancement ). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
Procedure
Please check the IDoc or the syntax description of the basic type /IRM/CHGBACKS01 (customer enhancement ).
When we insert new segments, where should we insert? How important is the segment number? Why is this error message even though that mandatory segment is there in the idoc?
Please help.
Thanks,
Lavanya

Hi,
I got the following error message.
Basic type ZCHGBCK does not exist
Message no. EA447
Diagnosis
IDoc type ZCHGBCK could not be found.
Procedure
Please enter an IDoc type that exists.
Srinivasan,
I had tested this with the standard idoc and it was perfect. i am having these issues after extension only.
Thanks,
Edited by: Lavanya Boora on Jun 2, 2008 10:55 PM

IDOC---JDBC scenario error: "INTERNAL" HTTP_RESP_STATUS_CODE_NOT_OK

i have a IDOC-XI--JDBC scenario,
the scenario fails at the Call Adpater Pipeline step............giving following error:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error when sending using HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
pls help me.....
Message was edited by:
sudeep dhar

but this error occurs after few message pass successfully.....
means at an interval this error happens...then again few messgae pass successfully,
This is the error which i get in MONI:
ERROR_CATEGORY: INTERNAL
ERROR_ID: HTTP_RESP_STATUS_CODE_NOT_OK
and in the pipeline step i can see the error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error when sending using HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

IDOC- XI- DB2 Error

I am working on IDOC-XI-DB2 scenario and when I am executing the same, i am getting folllowing error. Can anyone please help in resolving the same.
Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=Svr_DB2;TS=;AN=oa_I805_CustOutlet_MI;ANS=http://ccamatil.com/amatil_i_sap_appl/mtc/;
Regards

I am getting following error, with JDBC adapter,
JDBC message processing failed; reason Error 'com.ibm.db2.jcc.c.SqlException: DB2 SQL error: SQLCODE: -104, SQLSTATE: 42601, SQLERRMC: <;( END GET SET CALL DROP FREE HOLD LOCK OPEN WITH ALTER BEGIN' executing service raw2sql with SQL statement '<?xml version="1.0" encoding="UTF-8"?> <ns0:I805_Abstr_CustOutlet_MT xmlns:ns0="http://ccamatil.com/amatil_c_ccaml/mtc/"><StatementInsert><STATUS action="INSERT"><table>BSOMSAPP</table></STATUS></StatementInsert><StatementStoreProc><BSOMPSAP action="EXECUTE"><Para1><isInput>true</isInput><type>CHAR</type></Para1><Para2><isInput>true</isInput><type>CHAR</type></Para2></BSOMPSAP></StatementSto
2008-06-23 10:52:59 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error 'com.ibm.db2.jcc.c.SqlException: DB2 SQL error: SQLCODE: -104, SQLSTATE: 42601, SQLERRMC: <;( END GET SET CALL DROP FREE HOLD LOCK OPEN WITH ALTER BEGIN' executing service raw2sql with SQL statement '<?xml version="1.0" encoding="UTF-8"?> <ns0:I805_Abstr_CustOutlet_MT xmlns:ns0="http://ccamatil.com/amatil_c_ccaml/mtc/"><StatementInsert><STATUS action="INSERT"><table>BSOMSAPP</table></STATUS></StatementInsert><StatementStoreProc><BSOMPSAP action="EXECUTE"><Para1><isInput>true</isInput><type>CHAR</type></Para1><Para2><isInput>true</isInput><ty
2008-06-23 10:52:59 Error Exception caught by adapter framework: null
2008-06-23 10:52:59 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error 'com.ibm.db2.jcc.c.SqlException: DB2 SQL error: SQLCODE: -104, SQLSTATE: 42601, SQLERRMC: <;( END GET SET CALL DROP FREE HOLD LOCK OPEN WITH ALTER BEGIN' executing service raw2sql with SQL statement '<?xml version="1.0" encoding="UTF-8"?> <ns0:I805_Abstr_CustOutlet_MT xmlns:ns0="http://ccamatil.com/amatil_c_ccaml/mtc/"><StatementInsert><STATUS action="INSERT"><table>BSOMSAPP</table></STATUS></StatementInsert><StatementStoreProc><BSOMPSAP action="EXECUTE"><Para1><isInput>true</isInput><type>CHAR</type></Para1><Para2><isInput>true</isInput><ty.
2008-06-23 10:52:59 Error The message status set to NDLV.

IDoc to File - Error in Content Convertion?

Hi Guys!!
I am facing a problem.
I used to have an interfase working well, until i had to do a modification.
Scenario is iDoc to File
Header
num
Position
- - - - A
- - - - B
- - - - C
- - - - D
And now is
Header
- - - - num
Position
- - - - A
- - - - B
- - - - C (C is 1:unbound )
- - - - - - - C1
- - - - - - - C2
- - - - - - - C3
- - - - D
Since that, interfase does not workk anymore.
Any suggestion? Please!!
Thanks
Edited by: ademiv on Feb 9, 2012 1:03 PM

I am not facing mapping errors. Look!
http://img715.imageshack.us/img715/5932/20120209093317.png
With this before it was working
Header
num
Position
- - - - A
- - - - B
- - - - C
- - - - D
But now, with this structure is not working. Maaping is ok, i have already checked it.
Header
- - - - num
Position
- - - - A
- - - - B
- - - - C (C is 1:unbound )
- - - - - - - C1
- - - - - - - C2
- - - - - - - C3
- - - - D
Idea?

Sales Order Upload using IDOC : Batch Input error

Hi all
When I am uploading sales order data using <b>idoc</b> method it was giving the below error when the Items are more than 10,if the items are less than 10 it was creating the sales order successfully.
<b>Screen 0000 is too large for internal batch input area</b>
for upload I am using the standard Meassege type and Basic idoc type
Message type : ORDERS
Basic idoc type : ORDERS05
Function Module : idoc_input_orders(ORDE)
Please help if there is any Idea
Thanks in Advance
Warm regards
Rajasekhar

Hi Madhu,
This error might be due to screen resolution. Try to reduce screen resolution and run your program.
Cheers
Manohar

Purchase order IDoc PORDCH generation error

Hi all,
I have made all the settings in the partner profiles to trigger PORDCH IDoc when I create or change purchase order through output message type.
But the error it gives in WE05 is the following:
The segment E1EDK01 does not occur at the current level of the basic type PORDCR01 (extension ).
This error can have several reasons:
The segment E1EDK01 is assigned to a group whose header segment does not occur.
The segment E1EDK01 does not exist in the syntax description of the basic type PORDCR01 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Since the generated IDoc is of ORDERS05 structure this is giving an error.
Can anybody help me out with this.

Jwalith
It seems, you are using wrong Process Code/Inbound Function Module .... Create new process code or modify your Z-Process Code to link it to function module IDOC_INPUT_PORDCH, which is valid for Message Type PORDCH.
This should solve the problem.
Thanks
Amol Lohade

Idoc to XI - Error

Similar Messages

Maybe you are looking for