IDOC to XML file scenario with party

Hi All,
I am developing a IDOC to XML file scenario with party in which I have extended the MATMAS idoc and configured the receiver FILE communication channel.
But its giving me the error *"No receiver could be determined"*  with party. If I run the same scenario without the sender party its working fine.
And sender is my R/3 system under party P_Party and receiver is my third party system under P_Party.
Thanks in advance.
Gaurang

U can give a try as follows.
In the Partner Profile of Sender R/3 system,
Give the Receiver Party P_Party in the PartnerNo. Give the 'Business Partner' as logical System type.
In XI, Party Definition of P_Party
Give the following Alternative Identifier
Agency  -   Sender R/3  Business System       
Scheme -   ALE#GP
Value    -    P_Party

Similar Messages

  • Regarding receiver determination problem in IDOC-XI-XML file scenario

    Dear All ,
    In IDOC-XI-xml file scenario , I have configured SLD , IR . But in ID , after file adapter , reciever agreement configuration when I am doing receiver determination configuration I am not able to insert mapping program in configuration overview of receiver determination as I am not getting "New Specific" option in mapping .
    Can anybody suggest what could be the reason behind this .
    Thanks in Advance
    Prabhat

    Hi PRabhat,
    In RCVR determination, you need to select the party & service (as appropriate) save the obeject
    then refresh the configuration overview of recr det.
    then you can see the partner/service
    then you can open it & add the necessary objects.
    Regards
    Vishnu

  • IDOC TO HTML FILE SCENARIO WITH XSLT MAPPING

    Hi ,
                 I am doing idoc to html file using xslt mapping can anyone provide me some help(material or example ) please reply soon.
    Thanks & Regards,
    Vinay Yadav

    Hi ,
    For xslt mapping the place to start is
    http://www.w3schools.com/.
    in help.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/83/2200cb50d345c793336d9a1683163e/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/64b93d0d4e6b3be10000000a114084/frameset.htm
    There are some blogs here which can proove to be good.
    /people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
    /people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
    https://weblogs.sdn.sap.com/pub/wlg/3823 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    Regards ,
    Deepak
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping

  • IDoc-to-File scenario with external Partner ... PCK necessary?

    Hi all,
    I have a question concerning to a IDoc-to-File Scenario with an external Partner. Here is a short Description of the Scenario:
    The SAP ERP System creates an IDoc which should be send to the SAP Integration Server. The Integration Server respectively the IDoc-Adapter transform the IDoc in IDoc-XML. The Integration Server executes a Mapping and so on. In the final step the Integration Server should send the XML-File to a FTP Server in New York (external Partner) with the File/FTP-Adapter.
    Have I to install the Partner Connectivity Kit at a Server in New York or is it working without the PCK? Which are my possibilities?
    Thanks for your help
    with kind regards
    Christopher

    Hello,
    If the FTP server has connectivity to XI and if the
    port is open XI can directly do the FTP using File
    Adapter.
    Thanks,
    Himadri
    Hi,
    thanks for your quick answer.
    What means "connectivity to XI"? Our SAP-Environment is in Germany and the FTP-Server is in New York. Is it enough to open the port in the firewall?
    Thanks for your answer
    Christopher Kühn

  • IDOC to FILE scenario With Screen shots

    CAN YOU PLEASE SEND US THE DETAILS OF IDOC to FILE scenario With Screen shots  and do  the needful for me

    Hi Surya,
    I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
    While doing an IDOC -> XI -> File scenario, The Points to noted are:
    1. You don’t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
    2. You import the IDOC and use the same in your mapping.
    3. In this configuration note that you don’t have a sender agreement as you don’t have a sender IDOC adapter.
    If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
    points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
    IDOC -> File scenario ref:
    <a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
    File -> IDOC ref:
    <a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
    To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
    You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
    Also, I would suggest that you go through this blog by michal if any issue arises,
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Also have a look at these forum threads...
    IDOC TO FILE SCENARIO
    idoc to file scenario
    I hope this helps.
    Regards,
    Abhy Thomas

  • Error in Flatfile (txt) to xml file scenario

    hi,
    while executing the Flat file (txt) to xml file  scenario, the txt file picked up from my source directory, but i could not find in my target directory.
    when i check message monitoring, it is showing successful.
    Audit Log for Message: af840930-3fa2-11dc-a345-000423c7753d
    Time Stamp Status Description
    2007-07-31 16:14:47 Success Channel CC_sender: Entire file content converted to XML format
    2007-07-31 16:14:47 Success Send text file "xi_input.txt" from FTP server "64.72.230.130:/praba_source", size 353 bytes with QoS EO
    2007-07-31 16:14:47 Success Application attempting to send an XI message asynchronously using connection AFW.
    2007-07-31 16:14:47 Success Trying to put the message into the send queue.
    2007-07-31 16:14:47 Success Message successfully put into the queue.
    2007-07-31 16:14:47 Success The application sent the message asynchronously using connection AFW. Returning to application.
    2007-07-31 16:14:47 Success The message was successfully retrieved from the send queue.
    2007-07-31 16:14:47 Success File "xi_input.txt" deleted after processing
    2007-07-31 16:14:47 Success The message status set to DLNG.
    2007-07-31 16:14:48 Success The message was successfully transmitted to endpoint http://xiserver1:8000/sap/xi/engine?type=entry using connection AFW.
    2007-07-31 16:14:48 Success The message status set to DLVD.
    2007-07-31 16:14:48 Success The message was successfully delivered.
    I followed the Venkat Donela blog
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    IN sender CC, i used file content conversion(mesage protocol), file name scheme xi_input.txt
    In receiver CC , I used file (message protocol),file name scheme xi_output.xml
    In both CC , transport protocol is FTP.
    so i gave server name, port, username, password.
    could you help me out to find the error for this scenario also?
    Thanks in advance

    hi,
    In sender CC
    name and value are like this
    row.fieldNames     FirstName,LastName,MiddleName,City,Place,State,Country
    row.fieldSeperator     ,
    row.processConfiguration     FromConfiguration
    row.endSeperator     'nl'

  • How to create Inbound Idoc from XML file-Need help urgently

    Hi,
    can any one tell how to create inbound Idoc from XML file.
    we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml'  we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
    Please let me know the process to trigger inbound Idoc with out using  XI and any other components.
    Thanks in advance
    Dora Reddy

    Hi .. Did either of you get a result on this?
    My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
    I see lots of mention of using a Function Module.
    Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
    Or is there something tht can be done with Standard SAP?
    Thanks
    Lee

  • Automatically process IDoc to XML File port

    Hi everybody,
    I want to send two different IDocs via "XML File" port using change pointers and the distribution modell (one SAP standard, one custom).
    I maintained the distribution model and created outbound parameters in partner profile (WE20). Both are set to "Transfer IDoc Immed.".
    1.
    Now I change some master data and the change pointers are created. I run RBDMIDOC for both message types and both IDocs are created. But unfortunately they stuck at staus "30 - Idoc ready for dispatch" (yellow). I need to run RSEOUT00 to create the XML files.
    Is it possible to avoid a job that runs this report? I want the IDocs to be processed automatically right after creation.
    The really strange thing about this is, that it used to work for the standard IDoc (BOMMAT). But I might have changed some settings to get my custom IDoc work too and now both stuck at status 30?! This is what bothers me most...
    2.
    When the XML files are created (at the moment after running RSEOUT00) the status in WE05 is "03 - Data passed to port OK" (yellow).
    Why is this light still yellow? Everything is fine, the file was created, it should be green. Is there anything I can do?
    Thanks and best regards,
    Oliver

    Hi,
    thanks for your suggestions.
    Unfortunately this did not solve my problems.
    1)
    OUTMOD for both messages was 2 (which should be ok). Changing it to 1 did not have any affect.
    At least BOMMAT works again (both with OUTMOD 1 and 2). But my custom IDoc still does not get processed automatically.
    2)
    Running report RBDMOIND did not change the status of my IDocs. Please keep in mind that it is no tRFC port, but XML File port.
    Best regards,
    Oliver

  • XML File to 3rd Party Provider w/o any Middleware

    Hi
    I have a requirement wherein we are required to send XML files to 3rd Party Supply chain provided w/o using any middleware in most secured form. The Customer is on ECC5.
    One of options i could think about is as mentioned below.
    -  file based and using SFTP to send the XML file to 3rd Party provider
    Could you please let me know if their's any other alternate approach to meet this strange requirement.
    PS : 3rd party provider can provide webservice. But the question is how do we consume this into ABAP envirnoment and call them into ABAP COde. Any pointers on this as well would be really helpful
    Thanks

    Hi,
    I remember working on ECC5.0 and consuming a web service to create an ABAP Proxy.
    @ Ravi
    Refer the below link for consuming a web service and creating an ABAP proxy.
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm
    Regards,
    Chen

  • File-Soap-File scenario with asynch - synch bridge

    Hi,
    I am new to PI and I'm trying to develop a FIle-SOAP-File scenario with asynch-synch bridge. These are the components in my integration builder:
    Business Component to act as both the sender and receiver
    1 outbound communication channel to pick up the file from ftp server
    1 SOAP communication channel
    1 inbound communication channel to write file to the ftp server
    receiver determination
    interface determination
    sender agreement
    receiver agreement
    In my outbound channel, I am using:
    Processing sequence:
    1     AF_Modules/RequestResponseBean                Local Enterprise Bean     1
    2     CallSapAdapter                                                         Local Enterprise Bean     2
    3     AF_Modules/ResponseOnewayBean                Local Enterprise Bean     3
    Module configuration:
    1     passThrough                         true
    3     receiverChannel                        inbound communication channel to write file to the ftp server
    3     receiverService                         Business component where the channel above is found.
    When I run the scenario, I am able to get the file from ftp server, map it to SOAP format according to the wsdl, forward the message to SOAP adapter, send it to web service, get the response back from web service, map the data to a regular file format. However, it fails to write back to the ftp server.  I am getting Java null pointer error at AF_Modules/ResponseOnewayBean.
    2010-07-28 15:48:01     Information     SOAP: completed the processing
    2010-07-28 15:48:01     Information     SOAP: continuing to response message 2ce3ec60-9a9a-11df-b109-00145ec5c1ae
    2010-07-28 15:48:01     Information     The message was successfully delivered to the application using connection SOAP_http://sap.com/xi/XI/System.
    2010-07-28 15:48:01     Information     The message status was set to DLVD.
    2010-07-28 15:48:02     Information     The message was successfully transmitted to endpoint http://vs06cs01.sce.com:8000/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
    2010-07-28 15:48:02     Information     The message status was set to DLVD.
    2010-07-28 15:48:02     Information     The application sent the message synchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
    2010-07-28 15:48:02     Information     MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
    2010-07-28 15:48:02     Error     MP: exception caught with cause java.lang.NullPointerException:
    2010-07-28 15:48:02     Error     File processing failed with java.lang.NullPointerException:
    Had anyone encountered this error? Any suggestions is greatly appreciated.
    Thanks.

    Thanks for the replies. I checked my module parameters and I realized that i entered the wrond business service. I fixed that and ensure that all 3 channels are running.
    I ran the scenario again and it does not give me Java Null pointer exception. However, it gives me a different errror.
    2010-07-29 08:52:31     Information     The message status was set to DLVD.
    2010-07-29 08:52:31     Information     MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
    2010-07-29 08:52:31     Error     MP: exception caught with cause com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
    2010-07-29 08:52:31     Error     File processing failed with com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
    I am trying to check all my settings again. Any pointers regarding the errors above?
    Thank you.

  • File to Web service (SOAP) to File scenario with out BPM in PI 7.1

    Hi All,
    I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
    1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
    2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
    PI server is 7.1 with SP:8
    I have configured the scenario like this
    1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
    2) Created Sender Agreement
    3)Created Receiver Determination
    4)Created Interface Determination
    5)Created Receiver Agreement
    Regards,
    Ramesh

    Hi,
    Thanks for your reply!!
    My Scenario is File to SOAP to File.
    Configred modules  in Sender channal below:
    Prcessing sequence:
    Number       Module Name                                        Module Key
    1..........       AF_Modules/RequestResponseBean.......1
    2..........       CallSapAdapter..........................................2
    3..........       AF_Modules/ResponseOnewayBean.......3
    Module Configuration:
    Module Key                                       Parameter Name                                       ParameterValue
    1                                                        passThrough                                            true
    3                                                        receiverChannel                                       receiverChannel name
    3                                                        receiverService                                        receiverService name
    please tell any more confiration requered.
    Regards,
    Ramesh

  • R/3 46C(IDOC) -- XI -- Flat file scenario

    Hi
    Is there anyone who could give me information on a R/3 46C(IDOC) --> XI --> Flat file scenario?
    Many thanks!
    br
    Göran

    Hi Manish
    We are using a standard IDOC called PROACT.PROACT01
    (We are using transaction sa38(Report RSMIPROACT) in R/3 to send our IDOC.)
    First we create the technical and business systems in SLD
    Second we transfer these to the repository.(I think the only thing you need to do is to update the SLD cache to get them there - Design : Integration builder --> Environment --> clear SLD cache)
    Then we just use the configuration wizard(Configuration : Integration builder --> Tools --> configuration wizard) to map everything together - defining sender and receiver etc(You get the configuration wizard tool by patching XI to patch level 4 or 5).
    I assume that you have made all the configurations accordingly to the XI configuration guide which you can download from the service marketplace.
    This is just a hint but maybe it can give you a start.
    br
    Göran

  • IDoc to Flat file scenario - abap mapping

    Hi All,
    I have to do some IDOC to Flat file scenarios. In Order to generate the file in required format I will have to add all segments(Nodes) of Idoc in FCC receiver. We also have other option of doing it through ABAP Mapping which I found in one blog.
    Now my question is : Is it better way of doing it through FCC or ABAP Mapping?
    Ofcourse from development point of view ABAP Mapping looks easier as FCC is very time consuming task.
    Is there and performance issues in either of the approach?
    Thanks and Regards,
    Atul

    Hi VJ and Harald,
    Thanks for your replies.
    I am not having PI7.1 however the given blog was very informative.
    I will try using file port approach as suggested.
    Thanks and Regards,
    Atul

  • IDOC to XML SOAP Scenario

    Hi All,
    I want to implement IDOC to XML SOAP scenario for 3 different IDOC types.
    Should i implement it under same namespace or use different namespace for each IDOC to XML scenario.
    Thanks,
    Vishal

    Hi,
    depends on your requirement and your XML SOAP receiver
    there are no general rules
    Regards,
    Michal Krawczyk

  • File to File Scenario with Secure Connection. Pls help urgent

    Hello All,
    I tried a lot to get a link/blog that expalin full scenario
    for File to File Scenario with Secure Connection
    Kindly let me know if somebody have link/doc for it
    that describe all the steps to do configuring this scenario.
    What is difference in simple words between
    FTPS and SFTP.
    Pls help it is urgent as I require for Project work urgently.
    Regards

    hi rich
    go through these links
    FTPs connection failed - error ".. certificate rejected by ChainVerifier"
    Re: What is SFTP, FTI channels
    http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
    FTPS implementation question.
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
    Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
    /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
    File adapter
    thanks
    Kunaal

Maybe you are looking for