IDOC type CREMAS01 and address validation for Germany [Error message R5520]

Hi guys
We are using idoc type CREMAS01 to create vendor master via an interface. We have a proble creating vendors via the interface when the vendor's country is Germany.
In table T005, field XREGS (address check with city file) is activated for country DE, and when any value in the address data is not valid, the idoc gets status 51, given invalid address message.
When creating vendors via XK01 or FK01 with the same address, the system gives option to accept the invalid street name (for example), and that was how many vendors were created.
We dont want to deactivate the address check for DE, just beacause of one interface.
Please what can we do so that the interface can bypass the address check, without we deactivating in table T005? My tech team thiinks there are not much enhancements to handle this for the idoc scenario since it uses a BDC.
Regards
Fis.

Guys,
Anyone got any idea to help?

Similar Messages

Process code or Fmodule for Idoc type PREQCR101 and message type PREQCR1

hi all,
Iam unable to find the process code or function module for the idoc type PREQCR101 and message type PREQCR1 for inbound process.
help from some one would be a lot appretiated.

Hi,
Go to transaction WE57 and you can find the processing FM and message type that are associcated to the IDOC type.
For process code if it is Inbound check WE42 and outbound check WE41 transactions
Regards
Shiva

Packing slip and address label for delivery

Hello all,
I have a business requirement where i want the delivery to generate packing slip and address label for delivery, once the TO picking is complete and updated in the delivery.
My first question - I would like to the configuration steps involved in making the delivery to print the required output types automatically .
and my second question is how the SAP system can be configured to make the delivery print the packing slip and address label for delivery automatically once the Picking status is updated in the delivery.
Thanks,
Maxx

Hi Max,
You have to carry out your settings in:
SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries
1) Maintain Access Sequence
- you should have a valid access sequence with proper the condition tables
2) Maintain Outout Types
- you should have an output type with proper settings: print progrm, samrtform (or spascript, etc), etc
- you output should be assigned to the proper access sequence
3) Maintain Output Determination Procedure
- you should have a valid procedure --> you have to assign your output type to the procedure
- in field V_T683S_XX-KOBED you have to define a requirement type for your output type (that contains an ABAP code). This ensures that the output type will be generated only if the conditions defined in the ABAP code are met.
4) Assign Ouput Determination Procedure
- You have to assign the procedure to the delivery type you use
Master Data
If your configuration is OK, you can create the output determination condition record in VV21:
- you have to choose the proper key table
- you have to define the proper conditions
- you have to define the printer
- you have to define number of outputs
- etc
SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Define Requirements
- Here the programmer can define the Requirement Type that can be assigned to the output type in the procedure.
- You can use e.g. VBUK-PKSTK to check the packing status (VBUK-VBELN=LIKP-VBELN)
All the mentioned settings (config, master data) can be done in transacton NACE also (except writing the ABAP code).
Regards,
Csaba

IDoc type could not be determined for the IDoc

I am trying to Post the payment run through the transaction F110.
In the payment run log i get the following message:
"IDoc type could not be determined for the IDoc"
But in fact the IDoc is generated and it is displayed in We05.
I have configured the Message type PAYEXT-PEXR2002 and EUPEXR-IDCREF01 both for the partner.
Has anybody Idea about why this error is coming and how i can resolve this?
This is important because in Payment run log, they need to know the IDoc number generated for that run, else it may become difficult for user to identify which IDoc was created for a particular payment run.
Would appreciate if anyone can please help on the same.
Thanks & Regards,
Narayanan

Hi,
If you are paying the payment through F110, if the payment exceeds the limit what you are spefied in available amounts in FI12 screen. First Please check this screen.
still if you are having any problem
Check in the below path:
IMG- Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Release for Payment - 1. Create Workflow Variant for Release for Payment
2. Assign Release Approval Procedure for Release for Payment
3. Define Users with Authorization to Payment Release
Thanks
Chandra

IDoc type could not be determined for the IDoc in F110

Dear All,
The below mentioned error is encountered by us in F110.We have check all the setiing and not able to find the solution for this error.
Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
The system is not creating the IDOC file.....
IDoc type could not be determined for the IDoc
Message no. B1090
Diagnosis
The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type from field DOCTYP.
Procedure
Possible error sources:
- The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
- The IDoc type is not known in your system and must be maintained.
Kindly do the needful.
Regards

If you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition.

Implementation of IDOC types FINSTA01 and PEXR2002

Hi All,
I want to implement the 2 IDOC types PEXR2002 and FINSTA01 using EDI.The requirement is like I have to generate both the inbound and outbound processing for both the IDOC types using EDI.
I have the following queries :
1)What are the basic fields that are required for both the inbound and outbound processing(like file format)
2)How the inbound and outbound processing will be triggered like how can I send the file from SAP to EDI or how can I get the file from EDI to SAP and how to uplaod the record into SAP is there any SAP standard transactions or any standard reports or do I have to configure in the SPRO etc.
3)What are the settings that I have to configure?
Please help me out and your help will be appreciated.
Thanks and Regards,
Ramesh.

Hello Ramesh,
The answers to your questions are a few chapters in some books, meaning its quite large.
But in short.
1. the minimum fields are what is required by that particular transaction in SAP for inbound and for outbound you gotta check with the receiving party what they need.
example , if you are posting a PO in SAP, then what are the mandatory fields, thats the minimum.
With every idoc , incoming, there are a few ways to post, most common is via function modules.
Lets say you know a partner which will communicate via EDI, you have to maintain a partner profile in WE20.
There you define the incoming and outgoing messages.
Every message has, idoc type.
Transactions WE42 and WE43 are where you define a process code for attaching the message type/idoc type to a Funtion module.
Also there is config for setting up output types, see transaction NACE.
This is a process with lots of parameters.
You would be better off getting a book which explains it all in a proper order.

Tax calculations and address validation IS-U

We’re looking to change our software that we use to
calculate sales/use tax and address validation.
Any recommendations? We need something that is
compatible with our IS-U / FI-CA.

Hey Randy,
We use vertex O series for tax, and Trillium for address validation.

Difference between IDOC Type WBBDLD06 and WP_PLU03

Hello Friends,
Can you please suggest me the difference between IDOC Types WBBDLD06 and WP_PLU03.
Regards,
Narendra Goyal

No Answer

I am trying to reinstall itunes 10.5 and am getting the following error message. An error occurred during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKey Token="1fc8b3b9a1e18e3b"Anyone know how to fix this?

i am trying to reinstall itunes 10.5 and am getting the following error message.
An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
Anyone know how to fix this?

same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers

TS3212 I have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

I purchased a monthly pack and havent been able to use it. I have been getting charged for 3 months now and I still get an error message saying "unable to load all your plans". How do I re-install or dowload and get my last 3 payments reimbursed?

I purchased a monthly pack and havent been able to use it. I have been getting charged for 3 months now and I still get an error message saying "unable to load all your plans". How do I re-install or dowload and get my last 3 payments reimbursed?

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/
or
Adobe contact information - http://helpx.adobe.com/contact.html

Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days

Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
<Email Edited By Host>

Hi vivekanandanganesan,
Thanks for using Apple Support Communities. This article has some steps you can try if you are unable to connect to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari

I'm trying to redeem an itunes card and it gives me an error message - an unknown error occurred (-1202) try again later. I've tried for several days now. What can I do?

I'm trying to redeem an itunes card and it gives me an error message - We could not complete your itunes store request. An unknown error occurred (-1202). Please try again later. I've tried several days now. Any idea what i need to do?

Chrisj4203, thank you for your kind answer.
I have done a lot of restores to the Iphone, and resets also.
I;ve done holding both buttons as you sugested, but there is no signal appearing.
I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
I don;t knoe what todo.
I have been trying for more than one mont.
I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message. It will not allow me to quit the program. Also, once that happens how do I remove the program from the computer?

So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message. It will not allow me to quit the program. Also, once that happens how do I remove the program from the computer?

What Airplane Mode program? To stop a running program launch Activity Monitor (in utilities folder) and quit the program from there. To remove the program drag it to the trash or better use the uninstaller that should have come with it.

IDOC type CREMAS01 and address validation for Germany [Error message R5520]

Similar Messages

Maybe you are looking for