IDOC type not in EDIMSG

Hi all,
I want to configure the IDOC type BLAORD in our SRM system. The problem is it's not in the table EDIMSG. There is a message type BLAORD but its IDOC type is bot BLAORD03, instead the name of the IDOC type is XEUST01. How can I add the IDOC type so I can use it for my change pointers, RBDMIDOC? I'm trying to transfer RFQ details from SRM to XI.

not an XI problem. Ask a business process expert.

Similar Messages

  • BI Idoc type not same as the source system Idoc type

    Hi Experts,
    We have  refreshed BI 7.0 from production to quality system and while restoring in source system in RSA1 we are getting error message " BI Idoc type ZSZD005 is not the same as source system Idoc type ZSAD008" with ID-RSAR371
    Quick response would be really appreciated
    Regards,
    RaviChandra

    Hope this will be helpful for you
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04af5ab-5737-2b10-67aa-88e25e80b325

  • BI Idoc Type IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE

    Hi all,
    how can we solve the IDoc miss match in source system (ECC6).
    Error :
    BI Idoc Type ZSTC029 IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE ZSTC031
    please provide me solutions..
    Thanks in advance,
    Venkatesh

    Hi Venkatesh,
    Check here.........
    BW idoc type not same as source system idoc type
    Thanks,
    Vijay.

  • Idoc Type Mismatch in Source & BW Systems

    Hi Friends
    My problem goes as follows
    I have BW development system and R/3 Development systems.Both this comination was working fine.Suddenly we had system copy of R/3 Production on R/3 Development for some testing.Now BW source system turns inactive.When i try to activate its gives following message.
    'BW Idoc Type A is not equal to source system Idoc Type B'.
    So using transaction WE30 i mainatined Idoc Type A in source system.But still it gives same error on activation of source system.I am stuck up here
    Would u people plz help me with this urgently.Waiting for ur response.
    Raghu

    See the below link
    BW idoc type not same as source system idoc type
    After this try to restore the connection
    Regs
    Gopi
    Assign points if it helps ...

  • RSAR2318 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Error RSAR238 : IDoc type for source system T90CLNT090 is not available
    I have already checked trx & dtps, but could not find resolution.
    Kindly help me with this error.
    Thanks and regards,
    MS

    M Sharma wrote:
    But how exactly can I create when T90CLNT is not active? Help please.
    Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

  • RSAR238 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Kindly help me with this error.
    Thanks and regards,
    Dhanapal

    Hi,
    Check the same in SDN..
    Object ZDUMMY could not be activatedMessage no. R7I028
    Re: DSO Activation problem
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
    Thanks
    Reddy

  • IDoc type could not be determined for the IDoc

    I am trying to Post the payment run through the transaction F110.
    In the payment run log i get the following message:
    "IDoc type could not be determined for the IDoc"
    But in fact the IDoc is generated and it is displayed in We05.
    I have configured the Message type PAYEXT-PEXR2002 and EUPEXR-IDCREF01 both for the partner.
    Has anybody Idea about why this error is coming and how i can resolve this?
    This is important because in Payment run log, they need to know the IDoc number generated for that run, else it may become difficult for user to identify which IDoc was created for a particular payment run.
    Would appreciate if anyone can please help on the same.
    Thanks & Regards,
    Narayanan

    Hi,
    If you are paying the payment through F110, if the payment exceeds the limit what you are spefied in available amounts in FI12 screen. First Please check this screen.
    still if you are having any problem
    Check in the below path:
    IMG- Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Release for Payment - 1. Create Workflow Variant for Release for Payment
    2. Assign Release Approval Procedure for Release for Payment
    3. Define Users with Authorization to Payment Release
    Thanks
    Chandra

  • IDoc type could not be determined for the IDoc in F110

    Dear All,
    The below mentioned error is encountered by us in F110.We have check all the setiing  and not able to find the solution for this error.
    Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
    The system is not creating the IDOC file.....
    IDoc type could not be determined for the IDoc
    Message no. B1090
    Diagnosis
    The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
    The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
    The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type  from field DOCTYP.
    Procedure
    Possible error sources:
    - The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
    - The IDoc type  is not known in your system and must be maintained.
    Kindly do the needful.
    Regards

    If you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
    see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition.

  • Flat File IDOC - ECC, segment defn x in IDoc type y CIM type do not exist

    Hi,
    I'm working on idoc flat file > sap scenario.  Everything seems to be working up until the point where I get an error message:
    EDISDEF: Port EDIPORT segment defn E2FINBU000 in IDoc type FIDCCP01 CIM type  do not exist
    I've loaded the meta data, and the file structure is fine.  I believe the issue is related to PI not having the idoc I'm interested in listed in WE30.  How do I reference the standard IDOC type FIDCCP01?  Ideas I've had are around SWCV or transport from another system, the first I'm not sure which SWCV, the later seems a bit of a bodge and I dont like the idea.
    Thanks
    James.

    Hmm.. some light for the situation.  Seems that the segments imported are:
    E1FINBU     E2FINBU     31I
    E1FINBU     E2FINBU001     40A
    E1FINBU     E2FINBU002     40B
    E1FINBU     E2FINBU003     45A
    E1FINBU     E2FINBU004     45B
    E1FINBU     E2FINBU005     46A
    E1FINBU     E2FINBU006     46C
    Which indeed does not have E2FINBU000, which the IDOC is most definitely trying to pass.  I can only guess that the middleware producting this IDOC is flawed, and that standard SAP ALE will accept this as E2FINBU (It works into another SAP system without XI).
    Guess I've answered my own question, but feel free to offer light for points
    Thanks,
    James.

  • Which iDOC Type for Credit/Debit notes generated from SD Module ?

    Hi,
    We are implementing an EDI Solution for SD Invoices which would involve sending EDIFACT Messages generated out of mapping the SAP iDOC TYPE INVOIC02 to the EDIFACT fields.
    We also have to send Credit and Debit Notes generated from SAP in the SD Module in the same path. We are currently planning on using INVOIC02 for doing this.
    My Question: Is this the proper approach ? We don't want to use the Credit / Debit advises in FI-GL to post to Credits to Customer Account.
    Is there any other iDOC Type or message type that we should be using for SD Credit/Debit Notes ?

    Hi Mahesh,
    Thank you for your help.
    In my client location data is posted non-sap to sap through SAP XI/PI.
    so i need to tell the xi guy to which IDOC is used for this interface and technical names.
    Can you help me.

  • Port &1 segment defn &2 in IDoc type &3 CIM type &4 do not exist

    Hello,
    I've a question. We would send an standard IDOC from the 4.6C System to our SAP Xi 3.0. I customized the XI with TA IDX1 and IDX2. If we trigger the IDOC to XI I get the follow error message back:
    Port SAPQ73 segment defn E2EDL20002 in IDoc type DELVRY03 CIM type &4 do not exist.
    The IDOC Vers. is 4.6. In another system with IDOC Vers. 6.20 isn't a problem. So I think its a problem of the IDOC Version, or? So I checked the forum about this topic but I didn't find anything. So, I hope you can help me. Kind Regards Stephan

    Hello,
    I have exactly the same issue... We're currently upgrading our SAP system 4.7 to ECC6.0. We're also upgraded the system to an unicode system.
    Before those change, the interface between SAP and Xi worked well. Since the upgrade, those idocs don't pass any more and get the same error message than Stephan.
    I've checked the authorization of the RFC user and he has SAP_ALL and SAP_NEW. Partner profile, RFC connection, port and distribution model didn't changed.
    Do someone have an idea why this can appear ?
    Thanks in advance.

  • Source System Activation - IDOC Type does not exist

    I'm doing a new installation of BI7 and when I want to activate the source system on  replicate Metadata Box and select "Only Activate" it comes up with error stating :Basic Type ZSxxxxx does not exist
    When I look in SE16 on table RSBASIDOC I can see the IDOC Type exist on both BW and R/3 Systems
    Any solution?

    Check my reply
    Re: "Basic Type Does Not Exist"

  • Message types not in BD64 and WE20,but idocs are passing

    Hello ,
    we are facing a strange scenario.
    between two partner systems A and B, 4 message types are maintained.
    Idocs exchange to and fro.
    but in system B, few idocs are visible which are having sender as system A.
    but if i check in system A, these idocs are not sent at all.
    this emssage type is not maintained in either of the partner profiles as well.
    can anyone throw light what is happening ?
    Regards,
    Chaitanya

    solved by restarting

  • IDOC - process code with error "Application Object Type not planned'

    Hi all,
    I am doing an inbound idoc.... in TCODE we42, i trying to put function module which i created, attached to the process code.
    However, when i put my function module ZIDOC_INBOUND to the process code... it comes out error, 'Application Object Type not planned.'
    Why is this so?
    Please advice...
    Thanks and regards...
    William Wilstroth

    HI all,
    I had solved this problem. I should have gone to we57 to tie the function module.
    thanks.
    William Wilstroth

  • For the new delivery type created the Idoc is not getting triggered

    Hi All,
    I am facing the following problem:
    For every outbound delivery getting created we have an Idoc which creates the file(sending the outbound delivery details), this file is sent to a system where the picking & packing of the goods happen. This process seems to be working fine for all the existing delivery types, but now we created a new delivery type for which the Idoc is not getting triggered.
    Would like to understand what setting are we missing because of which the Idoc is not getting created for the new delivery type.
    The Idoc being used is:   DESADV01
    Message type :DESADV
    Thanks,
    Geeta

    I believe your existing idocs are created through a output type on the delivery ? if yes, probably you need to configure an existing output type / create a new output type for your new delivery type...

Maybe you are looking for