IDoc- userclone05 error with reference user
Hi Guru's
An idoc is in error. message type - userclone , basic type is userclone05.
error - ref user rcf_cand_int does not exist.
the central user is serve ZE2 clnt 050 from where user roles are replicated or users are created in other sstems.
idoc is in server ZS1.
Now can anybody tell me how to check whether this idoc wa creating a user or doing something else.
Regards
Manu
Edited by: Julius Bussche on Feb 6, 2009 3:05 PM
Please use meaningfull subject titles
Hi ,
The Userclone Idoc message type creates users with different roles in receiving systems.
The User data is centrally maintained in teh Sender system from which it is distributed across to various systems.
Transaction SU01 is used to check the Users .
Probably accoring to the error mentioned Users are not created in teh receiving system.Check with Tcode SU01(sender and receiver) and try resending teh Users once again .
Furthermore you may refer these links whcih may be helpful :
http://www.saptechies.com/setting-up-central-user-administration/
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00a2105-cb48-2a10-26a3-93bb81f3135d
Regards,
Radhika.
Similar Messages
-
What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?
Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?
-
Printing Error with second user.
Thanks in advance everyone.
Here is my issue, I have an iBook G4 running 10.3.9 connected to a network printer with two user accounts, The first user account works fine and can print, however the second account cannot. It gives me the "Error Printing" message which is really helpful.
I have tried re-adding the printer, and deleting com.apple.pint... preferences files, and repairing the permissions.
Any insight would be wonderful.
Thanks,
PaulIn the second account ~/Library/Printers select the printer and Command + i. to open Get Info and check the *Ownership and permissions* down the bottom, to see if the second user can read and write to that printer.
-
"an XML element was malformed" error with anonymous user
There is no problem with another user but with anonymous user it gives "an XML element was malformed" error when I want to select data from Oracle database using BI_JDBC in VC. I have done the user mapping for the anonymous user like other users. I also give "read" and "end user" permissions for anonymous user in the BI_JDBC connection. For other users, it works. What should I do to use BI_JDBC in VC with anonymous user.
Thanks in advanceHi Nihat,
we currently facing the same issue, did you found the solution for this, or maybe a workaround for anonymous system access? Thanks for your help!
Kind regards,
Benny -
OEM 11g login error with sys user.
I have two database in my local host. one is created with dbca and another is manually created.
i am not able to login ONLY with "sys" user in OEM 11g but i can login in sqlplus with the same user(only in database created manually ).yes m giving correct pwd as i mentioned i am bale to login with the same in sqlplus . below is the log details :
C:\Users\jatrived>emca -deconfig dbcontrol db
STARTED EMCA at Apr 25, 2013 12:33:20 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: cgdb
Do you wish to continue? [yes(Y)/no(N)]: y
Apr 25, 2013 12:33:29 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\cfgtoollogs\emca\cgdb\emca_2013_04_25_12_33_19.log.
Apr 25, 2013 12:33:30 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 25, 2013 12:34:12 PM
C:\Users\jatrived>emca -config dbcontrol db
STARTED EMCA at Apr 25, 2013 12:34:29 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: cgdb
Listener port number: 1521
Listener ORACLE_HOME [ D:\oracle\product\11.2.0\dbhome_1 ]:
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Password for SYSMAN user: Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\11.2.0\dbhome_1
Local hostname ................ ***********.corp.****.com
Listener ORACLE_HOME ................ D:\oracle\product\11.2.0\dbhome_1
Listener port number ................ 1521
Database SID ................ cgdb
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: y
Apr 25, 2013 12:35:12 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\cfgtoollogs\emca\cgdb\emca_2013_04_25_12_34_29.log.
Apr 25, 2013 12:35:16 PM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Apr 25, 2013 12:36:26 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
Apr 25, 2013 12:36:33 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: Software library is already configured.
Apr 25, 2013 12:36:33 PM oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: EM_SWLIB_STAGE_LOC (value) will be ignored.
Apr 25, 2013 12:36:33 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Deploying Provisioning archives ...
Apr 25, 2013 12:37:29 PM oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Provisioning archives deployed successfully.
Apr 25, 2013 12:37:29 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
Apr 25, 2013 12:37:36 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Apr 25, 2013 12:37:37 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Apr 25, 2013 12:38:23 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
INFO: Database Control started successfully
Apr 25, 2013 12:38:23 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
INFO: >>>>>>>>>>> The Database Control URL is https://***********.corp.****.com:5500/em <<<<<<<<<<<
Apr 25, 2013 12:38:25 PM oracle.sysman.emcp.EMDBPostConfig invoke
WARNING:
************************ WARNING ************************
Management Repository has been placed in secure mode wherein Enterprise Manager data will be encrypted. The encryption key has been pl
aced in the file: D:/oracle/product/11.2.0/dbhome_1/***********.corp.****.com_cgdb/sysman/config/emkey.ora. Please ensure this f
ile is backed up as the encrypted data will become unusable if this file is lost.
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 25, 2013 12:38:25 PM
portlist details :
here now two db having same port , how to remove or change ?
D:\oracle\product\11.2.0\dbhome_1\install>more portlist.ini
Enterprise Manager Console HTTP Port (ORA10) = 5500
Enterprise Manager Agent Port (ORA10) = 1830
Enterprise Manager Console HTTP Port (jai) = 1158
Enterprise Manager Agent Port (jai) = 3938
Enterprise Manager Console HTTP Port (test) = 1158
Enterprise Manager Agent Port (test) = 1830
Enterprise Manager Console HTTP Port (cgdb) = 5500
Enterprise Manager Agent Port (cgdb) = 1831 -
AGR_USERS, but for users with reference user assigned
Hi...
How do I get a complete list is "Users By Role" when a large number of users only have roles via a reference user?
Table AGR_USERS does not list these roles!
/vitofavaHi,
S_BCE_68001400 (rsusr002) and select your users by the assigned reference user.(4th selection field)
b.rgds, Bernhard -
Dear experts,
We just have upgraded to Ehp5 and found an issue with standard IDOC segment. In segment E1EDP10 the following 3 fields are missing.
IDNKD_EXTERNAL
IDNKD_VERSION
IDNKD_GUID
As per OSS note 1175343, i supposed to do the following.
Enhance the segment E1EDP10 in transaction WE31:
a) Menu: Segment -> Add version
At the end of the segment, add the following fields:
Field name Data element
IDNKD_EXTERNAL MGV_IDNKD_EXTERNAL
IDNKD_VERSION MGV_IDNKD_VERSION
IDNKD_GUID MGV_IDNKD_GUID
A new version is created.
b) Release the new version: Return to the initial screen of transaction WE31 (choose "Back").
just to give some more information, we have version 002 before upgrading to Ehp5 and all the fields exist but after upgrading that version is missing.
When i try to add version to the segment, i am getting the following error.
Name range violation : Name E1EDP10 not permitted in CUSTOMER system
Message no. EA269
Diagnosis
An attempt was made to change segment E1EDP10.
System Response
This is not allowed in the current system.
Please guide me to get around with the errors in adding a new version and 3 new fields to it.
Thanks in Advance..
Rajesh.Hi ,
The Userclone Idoc message type creates users with different roles in receiving systems.
The User data is centrally maintained in teh Sender system from which it is distributed across to various systems.
Transaction SU01 is used to check the Users .
Probably accoring to the error mentioned Users are not created in teh receiving system.Check with Tcode SU01(sender and receiver) and try resending teh Users once again .
Furthermore you may refer these links whcih may be helpful :
http://www.saptechies.com/setting-up-central-user-administration/
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00a2105-cb48-2a10-26a3-93bb81f3135d
Regards,
Radhika. -
Error with CTC users at Solution Manager 7.1
Error during Inital Setup at Solution Manager 7.1
hello SAP Experts,
I have an error during the Initial setup Solution manager 7.1 SPS3.
I get it at SAP Solution Manager Configuration: System Preparation step 6.1 'Select SLD'.
I filled host, port and password, status of SLD server is green, then I clicked button 'Configure SLD Data Supplier...' I have get new window, to fill in passwords and options.
[SLD users|http://pokazywarka.pl/63hxan/] [SM2CTC & CTC2SM users|http://pokazywarka.pl/mcpakj/] (I logged into the system as a user SOLMAN_ADMIN, SLDDSUSER and SLDAPIUSER).
After I click button 'next' an error occurred:
Error: Execution of Function AGS_SISE_SET_CTC_STATUS ends with an error (message ID: 341, message number: No RFC authorization for function module AGS_SISE_SET_CTC_STATUS.:RFC_NO_AUTHORITY, message text: ).
I have performed tx.Solman_setup as SOLMAN_ADMIN user.
All steps before the an error are finished sucessfully.
I looking for information at Google and SAP notes but can not find anything.
Please send any advices,
Best regards
SAPFanHello,
Please check my last reply to this very same issue in message:
RFC No Authority error
Best regards,
Guilherme -
LMS 4.1 - dbreader.html -- Authorization error with DB-Users
Hi all,
in our lab-environment we installed LMS 4.1 from scratch.
Trying to connect to eg. ani-db via URL (https://<server>/dbreader/dbreader.html) with user cwsiSA I got error message
stating "Authorization error".
Is that default behavior?
We need SQL-Connect to DB-Tables, as some "self-written" perl-scripts try to collect data.
Are there any steps necessary to enable access to DB-Tables (and Views) ?
Thanks for your feedback
LotharProbably the user role is missing this authorization. Go to Admin > System > User Management > Role Management Setup, and make sure the role assigned to this user includes DBreader access. You are looking for Lan Management Solution > Admin > System > DBReader Access.
-
I have configured an anonymous user and created a new framework page to display the content. When the page first loads, the correct framework page, theme, and content appear. However, if I click on one of the content tabs (even if it is the first one, which is currently showing correctly), I get the error <b>"No portal desktop is defined for this user.If this problem persists, contact your system administrator."</b>
I have checked all permissions on everything to ensure that they are set correctly. Is there some type of session management that needs to be configured for anonymous users? It seems to load great the first time, and then after that is when the error occurs. Logged in users do not have this error.
Thanks for any help offered.Hi,
go thru this thread...
Re: "No portal desktop defined for this user."
thanks,
Padmanaban -
File to IDOC scenario : Error with mapping due to Context handling
Hi Experts.
I have a file to IDOC scenario which need your advice.
Source File structure as follows:
Control_Header <1:1>
Invoice_Header <1:unbounded)
Invoice_Line <1:unbounded)
Trailer <1:1>
Payload as follows capture from SXMB_MONI
- <Control_Header>
<Key>999</Key>
<TransactionID>RCTV</TransactionID>
</Control_Header>
- <Invoice_Header>
<Key>000</Key>
<BusinessUnit>HDB05</BusinessUnit>
<InvoiceNo>64471</InvoiceNo>
</Invoice_Header>
- <Invoice_Line>
<Key>001</Key>
<UnitPrice>7.00000</UnitPrice>
<Quantity>1.0000</Quantity>
<GSTAmount>0.49</GSTAmount>
<GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Invoice_Line>
<Key>001</Key>
<UnitPrice>8.00000</UnitPrice>
<Quantity>1.0000</Quantity>
<GSTAmount>0.56</GSTAmount>
<GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Invoice_Header>
<Key>000</Key>
<BusinessUnit>HDB21</BusinessUnit>
<InvoiceNo>6Y0575</InvoiceNo>
</Invoice_Header>
- <Invoice_Line>
<Key>001</Key>
<UnitPrice>49.50000</UnitPrice>
<Quantity>1.0000</Quantity>
<GSTAmount>3.47</GSTAmount>
<GSTRate>0.07</GSTRate>
</Invoice_Line>
- <Trailer>
<Key>TRL</Key>
<TransactionID>RCTV</TransactionID>
<TotalFeedLine>96</TotalFeedLine>
<HashTotalValue>212.00</HashTotalValue>
</Trailer>
</ns:MT_EINVOICE>
Mapping as follow:
IDOC
<Control_Header> -> <Control_Header>
<Invoice_Header> --> <Header_Invoice>
<Invoice_Line> ---> removeContext --> <Line_Invoice> this is the child node of <Header_Invoice>
<Trailer> -
> <Trailer>
The result of the using the above Payload get the following result which not wht I seek
<Control_Header>
<Header_Invoice>
<Line_Invoice>
<Line_Invoice>
<Line_Invoice> *** This belong to the Invoice_Line of the second <Header_Invoice> at the payload
<Header_Invoice>
<Line_Invoice> *** THis segment is empty
<Trailer>
I required the Line_Invoice to belong to the child of the second <Header_Invoice>, I have tried using
removecontext with splitVaue and collaspeContext but to no avail.
May I know what is my mistake on the mapping of the Invoice_Line to Line_Invoice>
Rgds
FNGHello,
There should be something that could correlate the Invoice_Header/Key and Invoice_Line/Key. In your example, both are the same for the first and data set. If the sample looks like the one below, it is possible to sort things by correlating the Invoice_Header key and Invoice_Line key
<Invoice_Header>
<Key>000<Key>
</Invoice_Header>
<Invoice_Line>
<Key>000<Key>
</Invoice_Line>
<Invoice_Line>
<Key>000<Key>
</Invoice_Line>
<Invoice_Header>
<Key>001<Key>
</Invoice_Header>
<Invoice_Line>
<Key>001<Key>
</Invoice_Line>
An example mapping could look like this
For Header
Invoice_Header --> Header_Invoice
For Line
/InvoiceLine/Key --> removeContext --> splitByValue:valueChanged --> Invoice_Line
The subfields of the invoice line would also follow a similar logic, you just need to use formatByExample --> splitByValue:eachValue so that the context levels are the same.
Hope this helps,
Mark -
Error with concurrent users- Activation Passivation Bind variable ?
I have a programmatic view object based on procedure call that returns a ref cursor.
Application Module has a function that exposes get Method for this View object using client interface.
Everything works good until many users call the same Method ,for many concurrent users i got the below error intermittently :
JBO-27122: SQL error during statement preparation.
Attempt to set a parameter name that does not occur in the SQL: bussId
For 1 or 2 users this works perfectly fine.
bussId is a bind variable defined at View object of type Array.
I understand this should be because of activation/passivation as many users calling same function comes to picture.
To solve this I overloaded activateState/passivateState in View implementation for the bind var.
But i don't see those methods getting invoked ever.
I also enabled connection pool/AM pool and kept the default pool values high enough for concurrent users.
Nothing works .
Appreciate any help in this regard.
-SamHi,
See
http://antonis-antoniou.blogspot.com/2012/02/ensuring-that-your-adf-application-is.html -
IDOC posting error with dollar values
Hello,
We have recently started posting general ledger transactions via IDOC. We just noticed that a few of the idocs reflect a status 53 however did not create postings. When drilling into the message, it says that there were not valid line items. (meaning lines with 0 dollar value). However all of the records had valid dollar values. I have found a few notes that adress this as an issue in 46B, however we are on 4.7 and all of the suggested code fixes have been implemented already. Has anyone seen this happen?
-Jeff1. Please check that the process code in the inbound partner profile is correct.
2. If this is the case, you should check the ALE inbound methods ALE inbound methods for the process code and see whether the specified function module and application object type are correct.
3. If this is also the case, then the function module and the application object type are not permitted for the logical message type, message variant, message function and basis type that are contained in the IDoc control record. You should check whether the correct values have been assigned to these fields in the control record. If they do have the correct values, then the assignment to the function module and the application object type needs to be maintained.
BR,
Alok -
Video display errors with multi-user
Macbook Pro or Mavericks bug
10.9.3, MacBook Pro (Late 2010), MacBookPro6,2
When using the multi-user switching, the background image is distorted.
To recreate:
Establish user "B" with a background image on screen. I have three Spaces with three different images. All users logged out.
Login as user "A"
Login to user "B" using the Menubar to select the other user without logging out of user "A"
Note bar on right-hand side of screen and distorted colors.
User A has one of the Apple background photographs
User B has personal photographs from 8 MP camera
If user B is logged in from the Login Window then all is OK. Display issue only shows up when logging in from other user via fast user switching (or whatever that is called). If user B logs out and logs in again from the Login Window all is OK.Can you post screenshots of the distortion, someone may recognize it.
What you describe sounds like one user as something running that doesn't work well with FUS (I think it's still called 'fast user switching' ).
You can disable all login items by holding alt as you click the login button. See if that has any effect. If it does you know you need to look at the users login items (in System Preferences > Users & groups). In not sure if the 'alt trick' works inside the fast user switching menu, so you may want to verify the flaw exists when going to the login window, then reboot & try the 'alt trick' with the same steps.
The other thing to try is using a background image that has been resaved via Preview's export (or another app). It's possible the file itself is a reason for the issue, do standard backgrounds do the same? -
ObjectModel.dll Error with multiple users: InDesign CS6
I have 3 users (myself included) who are having issues with InDesign CS6. We've had issues since upgrading/installing. I've done uninstall's, cleans, fresh downloads and installs, upgrades to the latest versions, and still we are having this issue. I have also done individual file replacements such as the identified ObjectModel.dll on faulty machines with (suspected) known good files from a new download.
Faulting application name: InDesign.exe, version: 8.0.0.370, time stamp: 0x4f72c3ee
Faulting module name: ObjectModel.dll, version: 8.0.0.370, time stamp: 0x4f72c3d4
Exception code: 0xc0000005
Fault offset: 0x0002cd16
Faulting process id: 0x1770
Faulting application start time: 0x01ce26490287a001
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\ObjectModel.dll
Report Id: 5a6d3609-923c-11e2-ba48-c8f7332601d7
Is there any more data that can be provided or will phone support be required?
I've even had the same (above) issue just opening InDesign CS6Completed download and installation of 8.0.1.406. InDesign opened normally but could not even open the file. Here is the event log:
Faulting application name: InDesign.exe, version: 8.0.1.406, time stamp: 0x50335e39
Faulting module name: DOCUMENT FRAMEWORK.RPLN, version: 8.0.0.370, time stamp: 0x4f72c565
Exception code: 0xc0000005
Fault offset: 0x0001b4db
Faulting process id: 0x10bc
Faulting application start time: 0x01ce2676af15693d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\DOCUMENT FRAMEWORK.RPLN
Report Id: 30da0a23-926a-11e2-ba48-c8f7332601d7
Restarted PC, InDesign crashed upon load.
Faulting application name: InDesign.exe, version: 8.0.1.406, time stamp: 0x50335e39
Faulting module name: ObjectModel.dll, version: 8.0.0.370, time stamp: 0x4f72c3d4
Exception code: 0xc0000005
Fault offset: 0x0002cd16
Faulting process id: 0x1730
Faulting application start time: 0x01ce2677b5479f73
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\ObjectModel.dll
Report Id: 40052559-926b-11e2-8c56-c8f7332601d7
Canceled recovery of file, opened InDesign, attempted to open file, InDesign crashed again:
Faulting application name: InDesign.exe, version: 8.0.1.406, time stamp: 0x50335e39
Faulting module name: DOCUMENT FRAMEWORK.RPLN, version: 8.0.0.370, time stamp: 0x4f72c565
Exception code: 0xc0000005
Fault offset: 0x0001b4db
Faulting process id: 0xb84
Faulting application start time: 0x01ce2678068109a1
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\DOCUMENT FRAMEWORK.RPLN
Report Id: 75a1f9b5-926b-11e2-8c56-c8f7332601d7
Maybe you are looking for
-
I have tried the work around recommended on YouTube of creating a blank folder on my PC and syncing my photos on the mini iPad to that folder but it has not worked. I badly need the 6.1 GB as I use my mini iPad for meetings and I cant get my notetaki
-
Please help Obi Wan, you're my only hope.
-
Downloaded new PSE 13. Two folders result, 32-bit PhotoshopElem13 and PSE13 both of which contain a set-up file. These set up an installer which loads and then fails to continue. Running 64-bit Windows 7.
-
Hi Sound broken in Gnome with OSS. Every sound hangs and sounds like it was a helicopter flying around. Restarting OSS fixes if, but the problem is right back. pacman.log: [2010-01-17 15:40] synchronizing package lists [2010-01-17 15:41] starting fu
-
Auditing DML actions on multiple databases
I am using Oracle 10g Database on Solaris . I need to audit the complete DML statement issued on a table which exists in multiple schemas(same name with different data from other schemas) in multiple databases ie Consider the table ito be audited is