IDOC with different hardware for both clients

Hi All,
I am creating a MATMAS IDOC and I have receiver client on different hardware.
I have performed distribute model view(BD64) at sender client and got at receiver client also.
Now when I generate partner profile at receiver client end. It is not working.
It gives message ' No messages have been defined for the selection conditions in the model'
Can anyone help me..
-Maharshi

Closing the Thread as found the solution.
"As both clients are on diffrent servers so we need to create logical systems on both clients(with same name) and need to perform SM59 also at both ends."

Similar Messages

Posting Idocs with different users

Hi folks,
I have a simple scenario, File -> PI (7.0) -> ECC (Idoc)
I would like to know if there is a way to post the Idocs with different users, for example, in the source file a field contains the user that has to post the Idoc, so I'd like to map that user as the one that posted the Idoc.
Is it possible?
Thanks in advance!
Juan

Thanx Ivan, but you mean Outbound Idocs, or Inbound Idocs?
Prateek, the issue here is that this is a part of a whole process where are involved many handhelds.
With this handhelds, first there is an authentication of the users (via RFC) to see if that user has permission or not, and after that, if successful, when PI posts the data fetched from the handheld, they want to know the user that posted that info in ECC (IDOCS); supposing that it was the same user that did the validation before.
regards,
Juan

Weblogic Cluster with different hardware

Hello,
I want to configure a Bea Weblogic 8.1 Cluster including an itanium and an i686
server.
I have sucessfully configured a weblogic cluter with 2 Sun servers.
Now I want to use for my weblogic cluster an itanium server together with an Intel
i686 server both running on linux with jrockit as jvm.
Is it possible to do this with different hardware platforms to use in a Weblogic
Cluster?
I know that I have to use the same servicepack of WLserver and the same java machine.
On the itanium system i use Redhat AS and on the i686 system i use redhat es
Michael

Yes, this is fine. The only thing you need to watch for is that the system with the least resource is capable of taking over the workload of the system with the larger resources. This will often just be a matter of application configuration or tuning.
Tim
---

Has the ODI same installable for both Client & Server?

Has the ODI same installable for both Client & Server?
i.e. Team with multiple developers is concurrently working on ODI project. Repository is very much same. They just need the Designer Module in their desktop.
Is there separate installable for development IDE for ODI (Designer Module) instead of complete ODI which may include the server also?
Thanks In Advance
priyadarshi.

Hi ,
You can install only the client in multiple machine if multiple user are going use/share the same repository ... and you should be having the same
snps_login_work.xml
snps_login_security.xml
in all your client installations....so that you can have multiple users created and share the same repositroy ...
hope this helps
Thanks
Ananda

Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode.

Region Monitoring iOS 7 : didEnterRegion method is not calling when app is killed by user or by OS in iOS 7 only. It is working fine when it is in background. and the same code is working fine with iOS 6 for both app in suspended mode and background mode. What changes I have to made to work great in iOS 7 also.

I rewrote code for debugging purpose and tried to catch error using GetLastError();  method,
but it only printed 0. Below is code snippet; I think Create() throw an exception
and code goes to catch block.
LONG ConnectTS(CString strIP, UINT n_Port)
try{
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
// Exception Line
n_Err = GetLastError();
return NET_INIT;
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image
System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Output: -
ConnectTS is calling Create [is going to call]
Image System
0

Must I define abstract interfaces with different names for BPM?

Must I define abstract interfaces with different names for BPM?
When interface appeared several times with different values and usage.
Of course they are the same message type.

Hi,
Check this
RFC Scenario using BPM --Starter Kit
Regards
Seshagiri

I could not connect my Facebook account to my Spotify account I use different email for both account

please help me connect my Facebook account to my Spotify account I use different email for both accounts.

Try THIS Hope it works, if it does, leave me a kudo or a solution :)

Invoice posting with different currency for the same PO

Hi,
Can we post the the Invoice with different currencies for the same PO.
For example.
PO has Qty 100 pcs. amount 100 USD
GR Qty 100 pcs.
Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
Any sugggestions pls.
Thanks,
Satya

Hello
As per my knowledge, that is not possible.
And in whjat scenario, we need to do that?
In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
If you want, you can do MIRO in different currency that what is in PO.
In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
Hope this helps
Regards

Are iPads built with different configurations for different countries?

Are iPads built with different configurations for different countries?

deebeeque wrote:
I live in the U.S. but am moving to Brazil. I would like to purchase an iPad here in the U.S. but want to have it set up for Brazil, ie: language, operation, WiFi. Can all of this be done by selecting the country specific configuration at the setup stage?
You can certainly chose the language when you set it up. WiFi is an international standard, no difference between US and Brazil. You can further go into Settings - General - International and select language, as well as keyboards and region format.
Also, Is it possible to order the iPad (to be shipped to me in the U.S.) with packaging material (ie: operation manual, etc.) in the Brazilian Portuguese language?
There is no operation manual included - English, Portuguese, or any other language. You can find the one you need at http://support.apple.com/pt_BR/manuals/.
Additionally, does Brazil have 4G?
I'm not sure, but as of now the only countries where the iPad 4G will work are the US and Canada - other countries that have 4G use different frequencies.

More contracts (with different suppliers) for one item

Dear MDM Experts,
is it possible to make more contracts (with different suppliers) for one item?
Thanks and regards,
Ádá

Hi,
Thanks for your answer. If I set my shopping cart for a contract with a supplier A, and I select an item with a supplier B, then after pushing button Transport to SRM on the shopping cart webdynpro UI, I would get the an error message, and the item wouldn't come to the SRM.
If the item doesn't have any supplier, and I make a contract with it, the supplier of the contract goes to the item, and after that I can't make a contract with an other supplier for this item, because of the uppers.
The type of field Supplier in table Catalog Items is Lookup field, and it can't be modified.
Could you please write to me which can I set our system to be able to make contracts with many suppliers?
Thanks and regards,
Ádám Horváth

I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

I don't think backup is supported but you may be able to access the TC's internal drive, from the iPhone, with an application like: NetPortal
Note: I haven't actually tried this app, so if someone else has and was successful in accessing the TC's drive they can certainly chime in.
Follow-up. Just downloaded and installed this app ... and I can now verify that it, indeed, can access both my TC's internal and externally attached USB HDD.

Can i set up my drive as encrypted with different partitions for different versions of osx?

i have some questions about setting up an encrypted drive with different versions of osx installed on separate partitions, and how this choice effects time-machine and the emergency recovery disk.
I have a new/refurbished macbook pro with a SSD. it already has mavericks installed. i want to fully wipe the drive and reinstall everything my self because I'm odd like that.
first wiping the current drive
Does the recovery partition get wiped if i use disk-utility to reformat the drive. Even thought the recovery partition does not show up as a partition, when i look at it with disk-utility? i would like to know I've wiped all partitions so that no little bugger gets left with out me knowing. Disk-utility does not show the recovery partition and this makes me concerned it might not wipe it.
Does mavericks automatically make a recovery partition during the installation process? Or do i need to make a new 1gb partition for the recovery disk?
Can i have two different partitions on my drive with separate installations of OSX on it? (one for work that i don't update the system os till my current project is done, and the other for experimenting with new software.)
will time machine back up both of the partitions or just one?
can i accomplish all this from a bootable usb drive or do i need to do this in target disk mode?
do i need to use a more capable utility than the stock apple "disk-utility"?
when reformatting the drive should i format it as encrypted or let file vault do this after i install mavericks?
how much does encryption slow down performance for things like photo/video/music production?

Do a backup before you do anything.
Does the recovery partition get wiped if i use disk-utility to reformat the drive
It shouldn't
Does mavericks automatically make a recovery partition during the installation process?
Yes.
Can i have two different partitions on my drive with separate installations of OSX on it?
Yes.
will time machine back up both of the partitions or just one?
It will as long as one partition is not excluded in the Time Machine/Options.
do i need to use a more capable utility than the stock apple "disk-utility"?
No, just boot into the Recovery Volume (command - R on a restart).
file vault do this after i install mavericks?
I would let File Vault do that.

Multiple iPods with different libraries for each?

Hi all, how do I set up iTunes so that I can sync up different iTunes libraries with different iPods? I have two iPods with different music on each and want to keep the libraries separate. (One is from an older computer.) The only option I see when plugging in the older iPod is "do you want to rease this iPod and sync with this iTunes library?" Yikes, no.
I'm using iTunes 9.
thanks,
Scott

It seems that you would just create your two separate libraries for the two iPods, library A for iPod A and B for B. Then, either don't connect iPod A to the computer when you have library B open or vice versa, but if you do, just select not to sync when the prompt appears.
Alternatively, elect to manually manage the iPods.

Setting mail with Cox (or other services with different servers for pop and smtp)

My Cox mail account uses different servers for pop and smtp (my personal ISP 1&1 does too).
The mail applet on my Blackberry Curve 8330 with Verizon does not allow to define different servers for pop and smtp, and further, for SSL smtp mail, the port is fixed at 995 and cannot be changed, while Cox (and 1&1) want to use 587 or something like that.
As a result, I can only receive mail with these services.
I also have yahoo mail, which works fine, so I can send mail with it and it is not a life-and-death situation, but I would like to be able to just reply to email sent to my Cox address.
I called Verizon and they said BlackBerry provides the mail access through their servers and the applet, so there is nothing they can do.
Is there a way to set it such that I can not only receive but also send mail through either of these services?
Thanks in advance,
Didier
PS: Other than that, the Curve on Verizon rocks!!! so much better down here than AT&T it's not even funny.

OK, thank you for the input.
The problem I have with this solution is like the one I have now using yahoo.
There are 2 problems:
1) mailing lists want the mail to come from the account that is subscribed, so if the cox account is subscribed, I can't contribute from the blackberry, and if the blackberry account is subscribed, I don't get my mail in Outlook. Neither is good for me.
2) people who send me mail to the Cox account and get replies from me from the blackberry continue responding to the account that can send from the blackberry (not Cox), and from that point on I do not have that mail on the computer.
The issue of having two copies is no big deal, I just delete the mail I do not need. I would rather have two than none.
Really, Blackberry should modify the email service so that they directly support mail systems like those of Cox and 1&1. I am sure there are others. They should also allow the use of another port for SSL than 995. I have not seen anyone using 995 for SSL.
Until recently, I had a BB provided by my employer, and we had a BES, and that worked really well. I would like to emulate as much of that functionality as possible without having to pay somebody another $10 or $20 a month just for the priviledge of having an account on a private BES server.
Anyway, thanks for the exchange and suggestions.
Didier

Creation of Custom IDoc with Message control for sales Order

Hi all,
I am trying to create custom Outbound IDoc with message control.
I wrote the code in a function module and i want to register that function module. (as in inbound registration of function module as in BD51).I am not knowing if that registration is necessary for outbound Idoc, if so in which transacition?
Please list me the steps to create a custom IDoc for Message control.
Thanks in advance,
Regards,
John.

Hi,
You need to use FM : MASTER_IDOC_DISTRIBUTE to create outbound idoc.fill the data in the tables EDIDC,EDIDD and generate the IDOC.
check this link:
Re: Master_IDoc_Distribute
and use transaction : WEDI for IDOC configurations.
here you will have all the transactions(step by step) to set the outbound IDOC configurations.
Regards
Appana

IDOC with different hardware for both clients

Similar Messages

Maybe you are looking for